Startseite Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland
Artikel Open Access

Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland

  • Monika Sujka , Urszula Pankiewicz EMAIL logo , Radosław Kowalski , Artur Mazurek , Katarzyna Ślepecka und Magorzata Góral
Veröffentlicht/Copyright: 25. September 2019

Abstract

The toxicity of heavy metals and their capacity for accumulation in the human organism make it necessary to conduct monitoring of their concentration in food. The objective of the study was to determine the content of lead, cadmium, copper and zinc in milk and dairy products from various regions of Poland: the Lublin Region, Podlasie, Podkarpacie, and Silesia. The study showed the presence of the analysed heavy metals in most of the products. The content of lead was related to the level of industrialisation of a region. Higher levels of Pb were found in products from Silesia than in those from the other regions. The study revealed the presence of cadmium in 50% of the samples. Its content varied in range from 0.0067 to 0.0058 mg/kg. The levels of Cu and Zn concentration in the analysed products were within broad ranges, from 0.0015 to 4.94 mg/kg and from 0.01 to 56.44 mg/kg, respectively. In the case of all analysed elements an increase in their concentration was noted in cheese spreads and cottage cheeses. No relationship was found between the content of heavy metals in the analysed products, and the region of their origin.

1 Introduction

Heavy metals are among the most dangerous contaminants in the environment, though many of them, under suitable conditions, play the role of bioelements necessary for correct functioning of the human body, e.g. zinc, iron, copper and selenium [1].

So far, no biological role has been demonstrated that could be played by mercury, cadmium, arsenic and lead, and they are considered to be substances totally alien to the human organism and harmful, even at very low concentrations. Common traits of mercury, lead and cadmium include ease of absorption from atmospheric air and from the alimentary tract, ease of penetration through the placenta, through the blood-brain biological barrier (Hg, Pb), ability to form complexes with macromolecules, and causing damage to the structure of the nucleic acids chains (Cd, Hg) [2, 3].

Toxic elements, e.g. cadmium, are absorbed with food and drinking water. Therefore, they can undergo bioaccumulation in products of animal origin and inclusion in the human food chain [3]. Long-term exposure of the human organism to even small doses of heavy metals, resulting from constant presence in a contaminated environment, may be the cause of subclinical changes, often irreversible, revealing themselves after many years, e.g. leukaemia. Milk and its products, e.g. cheeses, kefirs, butter etc., as basic sources of animal protein, most vitamins and minerals, and common elements of human diet, are at the same time the main source of heavy metals and should be subjected to permanent control of the concentration of those metals [4]. Monitoring studies on products of animal origin (milk, eggs) indicate a considerable variation in the concentration of Cd, Hg, Pb and other heavy metals, from trace levels to amounts exceeding the maximum allowable concentrations many times [5]. In Poland, as in the whole European Union, limits have been laid down for the level of those metals in food products, and limitations on their emission have been imposed [6, 7, 8]. The content of those metals in milk and its products differs significantly in regions with industrial contamination and areas ecologically clean, therefore they are considered as indicators of contamination of the environment and food. Their concentration in food products varies in relation to: the content of a given element in soil, fodder, water and air, the level of bioavailability, and also the phenomenon of inter-elemental interactions [9, 10].

Heavy metals, even though they occur in small amounts, are a serious threat to the human organism, causing e.g. anaemia, neurological changes, dementia, psychic disturbances, inhibition of enzyme activity, disturbances in the absorption of iron, osteoporosis, damage to the kidneys, muscular atrophy, as well as cancers of the mouth, lungs, genital glands [11, 12, 13, 14].

Milk is the basic raw material for the production of many food products and is the fundamental element in infant and child feeding, and therefore should have suitable quality and its content of heavy metals should be monitored as a matter of priority.

The objective of the study was to determine the content of lead, zinc, cadmium and copper in milk and dairy products from various regions of Poland (the Lublin Region, Silesia, Podlasie and Podkarpacie).

2 Materials and methods

2.1 Materials

Products for analyses were purchased in supermarkets. The choice of dairy companies whose products were analysed depended on the varied level of industrialisation of the particular regions of the country, and thus on various levels of environmental contamination. The Lublin Region (LA and LB) and Podlasie (P) are examples of regions with lower levels of industrialisation, Podkarpacie (PK) is a region with a medium level of industrialisation, while Upper Silesia (SA and SB) was chosen as a representative of the most industrialised regions of Poland. The letters A and B denote two different producers, while the numbers 1-5 are the number of products from a given assortment. After purchasing, the products were kept in their original packing at a temperature of -18°C, and subjected to analyses before the expiry of the “use by” date.

To determine the effect of raw material concentration and various production processes on the content of lead, cadmium, copper and zinc, 40 products from all assortment groups of a given producer (milk, butter milk, kefir, yoghurt, cream, cheese spread, cottage cheese) were analysed.

2.2 Measurement of water content

Water content of liophilisates and products was determined with the use of a moisture analyser (Radwag WPS50SW) after drying samples at 100ºC. Analysis was carried out in triplicate.

2.3 Lyophilisation

Samples of dairy products were lyophilised in a Labconco freeze dryer (Model 64132, Kansas City, MO, USA). Obtained lyophilisates were stored in an exicator and used for further analyses.

2.4 Determination of lead, cadmium, copper and zinc concentration

The samples obtained were ground using an analytical mill and an analytical balance was used to weigh samples of ca. 0.5 g, with an accuracy of 0.0001 g. The weighed portions were transferred to teflon tubes and flooded with 10 cm3 HNO3 (Suprapur-Merck). After closing, the tubes were placed in the rotor of a mineraliser. Mineralisation was conducted in a microwave oven, CEM Mars Xpress, at a temperature of 210 degrees Centigrade and a pressure of approximately 7 atmospheres. The obtained clear mineralisates were transferred quantitatively to measurement flasks with volume of 50 cm3 and diluted with demineralised water (conductivity 0.055 μS/cm) up to the mark. The obtained solutions were analysed by means of a mass spectrometer with coupled plasma induction (ICP Mass Spectrometer Varian MS-820). The gas used for plasma generation was argon, from the company Messer, with a purity of 99.999%. In the analysis no reaction chamber (CRI) was used. The following settings of the apparatus were applied:

  1. Plasma Flow – 16 dm3/min.,

  2. Nebuliser Flow – 0.98 dm3/min.,

  3. RF Power – 1.38 kW,

  4. Sampling Depth – 6.5 mm.

The determination was made with the method of standard curve. For the analysis, Ultra Scientific standards were used, with a purity of 99.999%. The results were expressed in mg/kg of fresh matter. During the analysis the analytical quality was controlled by means of measurement of a blind sample, a double sample, and the certified reference material “NIST-1577c Bovine Liver”.

Table 1

Validation parameters applied during analysis.

ElementLOD [mg/kg]LOQ [mg/kg]Precision [%]Recovery [%]Uncertainty [%]
Cd0.0040.0072.42996
Pb0.0050.016.079912
Cu0.0270.0552.479610
Zn0.0490.0983.0910014

2.5 Statistical analysis

The data were analysed using one-way analysis of variance (ANOVA) to examine the statistical significance of differences in the mean concentration of heavy metals determined in milk and its product samples. The probability level of P = 0.05 was considered statistically significant.

Ethical approval: The conducted research is not related to either human or animal use.

3 Results

The conducted analyses revealed the presence of the analysed heavy metals in most of the dairy products. Content of lead in milk from various regions amounted to a maximum of 0.013 mg/kg (Table 2). In dairy products of the type of kefir, yoghurt, buttermilk and cream, the content of lead varied in the range from 0.0039 mg/kg in yoghurt from Silesia (Table 5) to 0.156 mg/kg in kefir from the Lublin Region (Table 3). An elevated content of that element was noted in cream from Silesia – 0.143 mg/kg (Table 6). In cheese spreads the concentration of lead varied from 0.015 mg/kg in the product from the Lublin Region to 0.34 mg/kg in the product from Silesia. The highest accumulation of lead was found in cottage cheeses

Table 2

Content of lead, cadmium, copper and zinc [mg/kg product] in milk from various regions of Poland.

PbCdCuZn
LA0.012±0.004a*0.0000±0.0000a0.360±0.110a4.83±1.43a
LB0.013±0.003a0.0001±0.0000a0.310±0.081a2.58±0.66a
SA0.234±0.079b0.0000±0.0000a1.033±0.350b15.84±3.74b
PTWI1(μg/kg body mass)2573.57
  1. *Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

Table 3

Content of lead, cadmium, copper and zinc [mg/kg product] in kefir from various regions of Poland.

PbCdCuZn
LA0.156±0.022a0.0000±0.0000a1.250±0.220a15.68±1.59a
LB0.010±0.002b0.0005±0.0001b0.194±0.050b2.79±0.56b
SB0.004±0.000b0.0007±0.0002b0.126±0.030b1.92±0.38b
P0.097±0.002c0.0000±0.0000a0.920±0.180a9.05±0.12c
PK0.006±0.001b0.0004±0.0001b0.087±0.020b1.69±0.32b
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

Table 4

Content of lead, cadmium, copper and zinc [mg/kg product] in butter milk from various regions of Poland.

PbCdCuZn
SA0.039±0.008a0.0021±0.0004a1.720±0.260a8.51±0.71a
LB0.005±0.001b0.0004±0.0001b0.188±0.030b2.18±0.16b
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

Table 5

Content of lead, cadmium, copper and zinc [mg/kg product] in yoghurt from various regions of Poland.

PbCdCuZn
LA10.099±0.020a0.0000±0.0000a0.850±0.170a8.81±0.62a
LA20.078±0.020a0.0000±0.0000a0.690±0.130a8.43±0.51a
LB10.069±0.010a0.0000±0.0000a0.930±0.150a9.32±0.74a
LB20.004±0.001b0.0004±0.0001b0.099±0.020b0.01±0.00b
SB10.015±0.002cd0.0067±0.0010c0.138±0.020c2.68±0.24c
SB20.021±0.004d0.0011±0.0003d0.260±0.030d3.76±0.28d
SB30.004±0.001b0.0004±0.0001b0.010±0.002e1.18±0.11e
SB40.011±0.002c0.0029±0.0010e0.259±0.005d3.01±0.25c
SB50.008±0.002c0.0009±0.0002d0.124±0.020c2.70±0.18c
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

Table 6

Content of lead, cadmium, copper and zinc [mg/kg product] in cream from various regions of Poland.

PbCdCuZn
LA0.036±0.007a0.0004±0.0001a1.140±0.120a5.36±0.43a
LB0.006±0.002b0.0009±0.0002b0.002±0.000b2.05±0.26bd
SA0.143±0.020c0.0026±0.0005c0.963±0.080ad5.42±0.48a
SB0.012±0.003d0.0001±0.0000a0.028±0.050c2.72±0.35b
P0.100±0.020c0.0000±0.0000c0.880±0.140d8.35±0.58c
PK0.009±0.002d0.0010±0.0003b0.021±0.005c1.98±0.23d
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

- from 0.03 mg/kg in the product from Podkarpacie to 0.38 mg/kg in that from Silesia.

The study revealed the presence of cadmium in 50% of the samples of dairy products. The highest concentrations of that element, approximately 0.0067 mg/kg and 0.0058 mg/kg in each product, respectively, were noted in the case of yoghurt (Table 5) and cheese spreads (Table 7) from Silesia, and cheese spread from the Lublin Region.

Table 7

Content of lead, cadmium, copper and zinc [mg/kg product] in cheese spreads from various regions of Poland.

PbCdCuZn
LA0.051±0.010a0.0058±0.0010a1.150±0.130a7.72±0.62a
LB10.072±0.010af0.0000±0.0000b1.794±0.270b8.32±0.58a
LB20.015±0.004b0.0016±0.0005c0.082±0.020a3.71±0.29b
SA10.340±0.050c0.0000±0.0000b4.940±0.440c56.44±2.78c
SA20.021±0.004b0.0000±0.0000b1.086±0.140a5.34±0.42d
SA30.180±0.030dg0.0066±0.0010a1.530±0.190b11.2±0.67e
SA40.210±0.040dg0.0022±0.0005c2.850±0.310d19.36±0.96f
P10.120±0.020ef0.0000±0.0000b3.740±0.280e12.4±0.86e
P20.092±0.020f0.0000±0.0000b1.080±0.180a9.69±0.58g
P30.220±0.030g0.0000±0.0000b1.610±0.170b17.2±1.37f
PK0.028±0.005b0.0017±0.0005c0.530±0.050f5.16±0.31d
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

The content of copper in the dairy products varied within a broad range, from 0.0015 to 4.94 mg/kg. The highest concentration of that element was found in cheese spread from Silesia – 4.94 mg/kg (Table 7) and in cottage cheese from the Lublin Region – 3.94 mg/kg (Table 8), while the lowest – in cream from the Lublin Region – 0.002 mg/kg (Table 6) and in yoghurt from Silesia – 0.01 mg/kg (Table 5).

Table 8

Content of lead, cadmium, copper and zinc [mg/kg product] in cottage cheese from various regions of Poland.

PbCdCuZn
LA0.340±0.040a0.0000±0.0000a3.940±0.260a53.72±1.61a
LB0.039±0.007b0.0026±0.0010b1.308±0.240b11.21±0.67b
SA0.380±0.060a0.0000±0.0000a2.220±0.190c52.47±1.31a
PK0.030±0.005b0.0010±0.0003b0.406±0.050d5.39±0.43c
PTWI1(μg/kg body mass)2573.57
  1. * Means in the column denoted by a different letter are significantly different (p < 0.05).

    1Provisional tolerable weekly intake (recommended by the JECFA [16])

The level of zinc concentration in the analysed products varied within a very broad range, from 0.01 mg/kg in yoghurt from the Lublin Region (Table 5) to 56.44 mg/kg in cheese spread from Silesia (Table 7). The lowest content of zinc was noted in cream (1.98 mg/kg) and kefir (1.69 mg/kg) from Podkarpacie (Table 3 and Table 6), and also in kefir from Silesia (1.92 mg/kg) (Table 3), the its highest content was noted in cottage cheese from the Lublin Region (54 mg/kg) and from Silesia (52 mg/kg) (Table 8). As in the case of lead, copper and cadmium, and also in the case of zinc, an increase of concentrations were observed in cheese spreads and cottage cheeses.

4 Disscussion

Lead contaminating the environment can originate both from natural sources (e.g. volcanic eruptions) and from human activity (batteries, motor vehicle exhaust gases, fertilisers, pesticides, insecticides, lead-based paints, tobacco smoke, water pipelines). The most often indicated source of milk contamination with lead is residues of that element in animal fodder and in water, but also in materials used for packing [15]. WHO set the acceptable daily intake (ADI) of lead at the level of 0.428 mg, while the more often used index, provisional tolerable weekly intake (PTWI), currently amounts to 25 μg per 1 kg of body mass, both for adults and for children [16]. In accordance with the Regulation of the Commission (EC) No. 1881/2006 of 19th December, 2006 (with subsequent revisions) [8], setting

the highest allowable levels of certain contaminants in food products, the maximum allowable level of lead in milk is 0.02 mg/kg fresh matter [17]. The content of lead in consumable milk from the Lublin Region did not exceed that norm. The permissible level of lead was exceeded 10-fold in the milk from Silesia. Dobrzański et al. [10] demonstrated a statistically significantly higher content of lead in milk from an industrial area relative to an area considered to be free of industrial pollutants; the content of lead in milk from the area of Upper Silesia was 0.042 mg/kg, while in milk from an area considered to be clean (Lower Silesia) – 0.019 mg/kg. Also, Radzymińska et al. [18] reported the statistically significant difference in the concentrations of lead between dairy products originating from different regions of Poland (central, western and south eastern). Our study showed a correlation between the content of lead in dairy products and the level of industrialisation of a region. Average contamination of milk with lead in Poland in the years 1998-1999 was at the level of 0.005 mg/kg, and in 2000 it decreased to 0.004 mg/kg [19]. In studies by Szkoda et al. [20] and Górska et al. [21], lead concentration in cow’s milk was determined to be at the level of 0.003 mg/kg. In other European countries the Pb content in milk (mg/kg) was as follows: Slovenia – 0.05 and Spain – 0.0018 [22], Austria – 0.0065 [23], Italy – 0.0013 [24] and Romania – from 0.052 to 0.617 mg/kg [25]. Mean lead content in milk from Turkey was 0.0335 mg/kg [26], from Iran – 0.0129 mg/kg [27], from Mexico - 0.03 mg/kg [28] and from Pakistan - from 0.001 to 1.428 mg/l [29]. The results of Pb content determination in yoghurt reported by Khan et al. [30] indicated that this product may contain a much higher concentration of this toxic element (4.21 - 24.50 ng/g) than milk (3.35 ng/g). The study by Kulek de Andrade et al. [31] also showed that the content of lead in yoghurt can depend on production process because samples of a drinkable yoghurt contained a higher amount of this element than a pasty one. The concentration of lead in curd and cheese reported by Castro-Gonzalez et al. [28] was comparable to or higher than in milk. The authors concluded that it was due to increasing the protein content (lead has an affinity for protein) and decreasing the moisture level during cheese production.

Milk and dairy products represent about 20% of food consumption in Europe, similarly to cereals and vegetables [32]. According to Chary et al. [33] food originated from plant, mostly plant roots, is the main source of lead in human diet. The studies show that this element appears also in the milk of lactating animals fed contaminated grass [33] and consequently goes on to the human diet.

Monitoring of the content of lead in food is extremely important due to its high toxicity. Accumulation of lead in the human organism leads to a disturbance in the activity of many enzymes and in the functions of structural proteins. The best documented is the effect of Pb2+ on the enzymes of the respiratory chain, glycolysis pathway and the synthesis of hem, the effect of which are disturbances in the metabolic transformations of cells, such as: regulation of energetic processes, synthesis of proteins and nucleic acids [34]. Lead is a mutagenic element and can cause cancer, disturbances of the haematopoietic system and the central nervous system, and in addition it has the ability of passing through the placenta [1].

Cadmium is an element that is totally useless for the human organism. Its toxic effect is related mainly with its occurrence in the form of free cadmium ions that bind with atoms of sulphur, hydrogen and oxygen, causing disturbances in various metabolic cycles. Cadmium disturbs the metabolism of proteins and the transformation of vitamin B1. In cases of chronic poisoning it affects the metabolism of calcium and phosphorus compounds, impairs correct mineralisation of bones, and thus increases their fragility. Cadmium is classified among elements with a carcinogenic effect, and its embryotoxic and teratogenic effects are also confirmed [35]. The main source of soil contamination with cadmium is industry, phosphorus fertilisers and wastes. In nature that metal does not occur in a free state, but it is present primarily in sulphide ores of zinc, copper or lead, and also in fossil fuels, e.g. coal. Their mining and processing liberates considerable amounts of cadmium to the atmosphere, hydrosphere and soil [36], from which that toxic metal migrates into food. The standards pertaining to food do not specify the maximum allowable content of cadmium in dairy products, however, the JCFA (Joint Committee of Experts of FAO/WHO for Food Additives) determined the PTWI for that element at the level of 7 μg/kg of body mass [16]. Based on the results obtained it is not possible to confirm any correlation between cadmium content and the region of origin of the products. Pietrzak-Fiećko et al. [37], who studied cadmium content in milk from Podlasie and from the Province of Łódź, also did not find such a correlation. Górska et al. [21], Szkoda et al. [20] and Żmudzki et al. [38] demonstrated in their studies that cadmium content in milk amounted to 0.0039 mg/kg, <0.001mg/kg and 0.003 mg/kg, respectively. In milk from Bieszczady, cadmium was found at a concentration of 0.002 mg/l [39]. In cow’s milk from the area of the Warmińsko-Mazurskie Province and from the area of the Beskid Średni Mountains cadmium content was assayed at the level of 0.003 mg/kg [39,40]. In milk from the

Lublin Region cadmium was found at the concentration of an average of 0.006 mg/kg [39], and in milk from the District of Siedlce – at the level of 0.00039 mg/kg [21]. Significantly higher contents of cadmium in dairy products from central Poland than from western and southeast regions of the country were reported by Radzymińska et al. [18]. Dobrzański et al. [10] report cadmium content in milk within the range from 0.0035 mg/kg to 0.0083 mg/kg. For comparison, cadmium content in milk from highly developed countries, such as Italy, Spain and Austria, was at the level of 0.00002 mg/kg, 0.00047 mg/kg and 0.0007 mg/kg, respectively. In turn, the average content of cadmium in milk from the territory of Iran was 0.002 mg/l [41], from Pakistan - it ranged from 0.001 to 0.053 mg/l [29], and in cow’s milk from Saudi Arabia the level of 0.0047 mg Cd/kg was determined [42]. According to Kulek de Andrade [31] the content of Cd in yoghurts varies from 2.5 to 12.4 ng/g, depending on the yogurt kind. Khan et al [30] obtained Cd concentrations in the range from 1.36 to 2.22.ng/g and they were even lower than those determined for plain milk.

Contamination of the environment with copper is caused by its presence in industrial (electronic industry, mining industry, copper metallurgy) and municipal sewage, and also in dusts emitted by metallurgical plants [43]. Copper is a component of many enzymes which take part in metabolic pathways responsible for energy generation in the cell (cytochrome c oxidase), free radicals scavenging (superoxide dismutase), formation of collagen and elastin (lysyl oxidase), production of catecholamines (dopamine β-monooxygenase) or melanin (tyrosinase) [44]. Therefore, as opposed to cadmium and lead, it is an element essential for the correct functioning of the human organism. An excessive level of copper in the organism can, however, lead to serious disorders, e.g. allergies, hyperthyroidism, hepatic cirrhosis, and infections [45]. For copper, WHO established PTWI at the level of 3.5 mg/kg of body mass [46]. As zinc reduces copper assimilation in cows, its content in milk and in milk products is much lower than that of zinc [24]. The results obtained in our study are similar to those presented by other authors. Licata et al. [24] report that the content of copper in milk from Italy varied in the range from < 0.136 to 737.58 μg/kg. Parween et al. [29] obtained the results of Cu determination in milk in the range of 0.001 to 0.098 mg/l. The results determined in milk and yogurts from South Korea ranged from 137.9 to 718.3 ng Cu/g [30], whereas yoghurts from Brazil contained from 34 to 61 ng Cu/g [31]. Cheese spreads and cottage cheeses contain significantly more copper compared to the remaining assortment, which is the result of raw material concentration in the production process. A similar conclusion was formulated by Maas et al. [47]. On the basis of the results obtained it is not possible to determine any correlation between the content of copper in the analysed products and the regions of their origin.

The source of the environmental pollution with zinc is the combustion of fossil fuels (coal, petroleum oil and its products) as well as industrial and municipal sewage. Due to its easy solubility, zinc contained in mining and industrial waste can migrate to the ground waters. Certain preparations used for plant protection, as well as phosphorus fertilisers, are an additional source of contamination with that element [48]. Zinc, like copper, is a main structural element and regulates the activity of a number of enzymes, has antioxidant properties and plays a role in the maintenance of the redox equilibrium in the cell [49, 50]. Excessive levels of zinc are harmful, and may lead to e.g. asthenia, vomiting, anaemia, insomnia, or neurodegenerative diseases [50]. According to WHO, the value of the PTWI index for zinc is 7 mg/kg of body mass [46]. Values of zinc concentration in dairy products reported by other researchers are similar to those obtained in our study. Maas et al. [47] obtained for milk (France) the range of 20.62–30.96 μg Zn/g DM, and for cheese – 33.66-63.41 μg/g DM. In milk and dairy products from Egypt, zinc concentration was found to be in the range of 2.73–18.316 ppm [51]. The concentration of that element in milk from Italy fell within the range of 24.73–4961 μg/kg [24], while milk and yoghurts from South Korea contained this element in concentrations from 3535.6 to 4754.3 ng/ g [30].

5 Conclusions

The concentration of lead, cadmium, zinc and copper increases with the level of raw material concentration in the production process and attains the highest values in cheese spreads and cottage cheeses. No correlation was found between the content of cadmium, copper and zinc and the level of industrialisation of the region from which the products originates, as opposed to lead, the content of which is the highest in products from Silesia.

  1. Conflict of interest Authors declare no conflict of interest.

References

[1] Krzywy I., Krzywy E., Pastuszak-Gabinowska M., Brodniewicz A., Lead – is there anything to fear?, Roczniki Pomorskiej Akademii Medycznej w Szczecinie, 2010, 56, 2, 118-128, (in Polish).Suche in Google Scholar

[2] Seńczuk W., Contemporary toxicology, PZWL, Warszawa, Poland, 2005, (in Polish).Suche in Google Scholar

[3] Pyrz M., Transfer of cadmium, lead, zinc, copper and magnesium from the organism of the mother to the organism of the offspring through a healthy and pathological mammary gland in sheep, Wyd. AR, Lublin, Poland, 2006, (in Polish).Suche in Google Scholar

[4] Ryś B., Trace elements in fodder plants, feed doses and milk of cows in a region exposed to the effect of the sulphur industry, Rozprawy Naukowe AR Kraków, Poland, z. 253, 1999, (in Polish).Suche in Google Scholar

[5] Kabata-Pendias A., Biogeochemistry of trace elements, PWN, Warszawa, Poland, 1999, (in Polish).Suche in Google Scholar

[6] EFSA (European Food Safety Authority) Scientific Opinion of the Panel on Contaminants in the Food Chain: Cadmium in Food. The EFSA Journal. 2009, 980, 1-139.Suche in Google Scholar

[7] EFSA (European Food Safety Authority) Scientific Opinion of the Panel on Contaminants in the Food Chain: Lead in Food. The EFSA Journal. 2010, 8, 1570.10.2903/j.efsa.2010.1570Suche in Google Scholar

[8] Regulation of the Commission (EC) No. 1881/2006 of 19th December, 2006 (with subsequent revisions) laying down the highest allowable levels of certain contaminants in food products (Dz. U. UE>, L 364/5 z 20 12. 2006) (in Polish).Suche in Google Scholar

[9] Dobrzański Z., Górecka H., Opaliński S., Chojnacka K., Kołacz R., Content of trace and ultra-trace elements in cow milk and blood, Med. Weter., 2005, 61, 301-304, (in Polish).Suche in Google Scholar

[10] Dobrzański Z., Skiba M., Brożyńska A., Kowalska-Góralska M., Content of selected heavy metals in milk of ruminants (cows and goats) from industrial and ecologically clean regions, Acta. Sci. Pol. Medicina Veterinaria, 2009, 8, 3-14, (in Polish).Suche in Google Scholar

[11] Tong S., E.von Schimding Y., Prapamontol T., Environmental lead exposure: a public health problem of global dimensions, Bulletin of the WHO, 2000, 78, 1068-1077.Suche in Google Scholar

[12] Waalkes M.P., Cadmium carcinogenesis in review, J. Inorg. Biochem., 2000. 79, 241-244.10.1016/S0162-0134(00)00009-XSuche in Google Scholar

[13] Wojciechowska–Mazurek M., Mania M., Starska K., Opoka M., Cadmium in food products – grounds for lowering the threshold levels, Przem. Spoż., 2010, 64, 45-48, (in Polish).Suche in Google Scholar

[14] Glinicka A., Toxicity of cadmium and lead, Aura, 2002, 2, 30, (in Polish).Suche in Google Scholar

[15] Ayar A., Sert D., Akın N., The trace metal levels in milk and dairy products consumed in middle Anatolia – Turkey, Environ. Monit. Assess., 2009, 152, 1–12.10.1007/s10661-008-0291-9Suche in Google Scholar

[16] WHO, 2010. Evaluation of certain food additives and contaminants. 37th report of the Joint FAO/WHO Expert Committee on Food Additives. WHO Technical report series.Suche in Google Scholar

[17] Rozporządzenie Komisji (WE) NR 1881/2006 z dnia 19 grudnia 2006 r. (z późniejszymi zmianami) ustalające najwyższe dopuszczalne poziomy niektórych zanieczyszczeń w środkach spożywczych: (DzU UE, L 364/5 z 20.12.2006).Suche in Google Scholar

[18] Radzymińska M., Smoczyński S. S., Kopeć M. Persistent Organochlorine Pesticide, Lead, Cadmium, Nitrate (V) and Nitrate (III) in Polish Milk and Dairy Products. Polish J. of Environ. Stud., 2008, 17, 95-100.Suche in Google Scholar

[19] Mnicha W., Szteke B. (red.), Report from monitoring of the quality of soils, plants, agricultural and food products of the year 2000, Dom Wydawniczy Elipsa, Warszawa, 2001, (in Polish).Suche in Google Scholar

[20] Szkoda J., Nawrocka A., Kmiecik M., Żmudzki J., Control studies on toxic elements in food of animal origin, Ochr. Śr. Zasobów Nat., 2011, 48, 475-484, (in Polish).Suche in Google Scholar

[21] Górska A., Oprządek K., Mróz B., Level of microelements in milk of cows from farms in the Siedlce District, LXXII Zjazd Polskiego Towarzystwa Zootechnicznego im. Michała Oczapowskiego – Sekcja Chowu i Hodowli Bydła, Warsaw, 2007, (in Polish).Suche in Google Scholar

[22] Cerkvenik V., Doganoc D.Z., Jan J., Evidence of some trace elements, organochlorine pesticides and PCB in Slovenian cow’s milk, Food Technol. Biotechnol., 2000, 38, 2, 155-160.Suche in Google Scholar

[23] Pilsbacher L., Grubhofer F., Mercury, lead and cadmium in Austrian raw milk - a comparison to earlier analyses from foreign countries, Wien. Tierärztl. Monat. Vet. Med. Austria, 2002, 89, 9, 249-253.Suche in Google Scholar

[24] Licata P., Trombetta D., Cristina M., Giofre F., Martino D., Calo M., et al., Levels of “toxic” and “essential” metals in samples of bovine milk from various dairy farms in Calabria, Italy. Environ. Intern, 2004, 30, 1-6.10.1016/S0160-4120(03)00139-9Suche in Google Scholar

[25] Boltea F., Bretan L., Ketney O., Moldovan C., Heavy metals concentration in milk from the Baia Mare depression, J. Agroaliment. Processes Technol., 2008, 14, 2, 485-491.Suche in Google Scholar

[26] Simsek O., Simsek R., Gultekin O., Oksuz and Kurultay S., The effect of environmental pollution on the heavy metal content of raw milk, Nahrung-Food, 2000, 44, 360-371.10.1002/1521-3803(20001001)44:5<360::AID-FOOD360>3.0.CO;2-GSuche in Google Scholar

[27] Najarnezhad V., Akbarabadi M., Heavy metals in cow and ewe’s raw milk of north-east Iran, Food Addit. Contam. Part B Surveill., 2013, 6, 3,158-62.10.1080/19393210.2013.777799Suche in Google Scholar

[28] Castro-González N. P., Calderón-Sánchez F., Castro de Jesús J., Moreno-Rojas R., Tamariz-Flores J.V., Pérez-Sato M., Soní-Guillermo E. Heavy Metals in Cow’s Milk and Cheese Produced in Areas Irrigated with Waste Water in Puebla, Mexico. Food Addit Contam Part B Surveill. 2018, 11, 33-36.10.1080/19393210.2017.1397060Suche in Google Scholar

[29] Parween R., Shahid Shaukat S., Yasmeen K., Ara D. Evaluation of Environmental Impact on Heavy Metal Load in Cattle Milk. Pol. J. Environ. Stud. Vol. 25, No. 3 (2016), 1161-1166.10.15244/pjoes/61231Suche in Google Scholar

[30] Khan N., Jeong S., Hwang M., Kim J. S., Choi S. H., Nho E. Y., Choi J. Y., Park K. S., Kim K.S. Analysis of minor and trace elements in milk and yogurts by inductively coupled plasma-mass spectrometry (ICP-MS). Food Chem. 2014, 147, 220–224.10.1016/j.foodchem.2013.09.147Suche in Google Scholar

[31] Kulek de Andrade C., Klack de Brito P. M., dos Anjos V. E., Quináia S. P. Determination of Cu, Cd, Pb and Cr in yogurt by slurry sampling electrothermal atomic absorption spectrometry: A case study for Brazilian yogurt. Food Chem., 2018, 240, 268-274.10.1016/j.foodchem.2017.07.111Suche in Google Scholar

[32] Castellani V., Fusi A., Sala S. Consumer Footprint Basket of Products indicator on Food. JCR Technical Reports. Luxembourg: Publications Office of the European Union, 2017.Suche in Google Scholar

[33] Chary N S, Kamala C. T., Samuel D., Raj S. Assessing risk of heavy metals from consuming food grown on sewage irrigated soils and food chain transfer. Ecotox. Environ. Safe., 2008, 69, 513-52410.1016/j.ecoenv.2007.04.013Suche in Google Scholar PubMed

[34] Patočka J., Černý K., Inorganic lead toxicology, Acta Medica (Hradec Králové), 2003, 46, 65–72.10.14712/18059694.2019.8Suche in Google Scholar

[35] Ociepa-Kubicka A., Ociepa E., Toxic effect of heavy metals on plants, animals and humans, Inż. Ochr. Środ., 2012, 15, 2, 169180, (in Polish).Suche in Google Scholar

[36] Thornton I., Sources and pathways of cadmium in the environment, IARC Sci. Pub., 1992, 118, 149–162.Suche in Google Scholar

[37] Pietrzak-Fiećko R., Bakuła S., Jakubowska D., Smoczyński S.S., Content of cadmium and lead in consumable milk from various regions of Poland, Med. Środow. – Environ. Med., 2013, 16, 3, 15-19 (in Polish).Suche in Google Scholar

[38] Żmudzki J., Niewiadowska A., Szkoda J., Semeniuk S., Toxic contaminants of food of anumal origin in Poland, Med. Pr. 2001, 52, 12, 35 -40, (in Polish).Suche in Google Scholar

[39] Król J., Litwińczuk A., Brodziak A., Kędzierska-Matysek M., Level of lead and cadmium in milk of cows kept in various regions of Poland, Ochr. Środ. Zasob. Natur., 2007, 31, 451-454, (in Polish).Suche in Google Scholar

[40] Pietrzak-Fiećko R., Smoczyński S., Cadmium and lead contents in human milk, cow’s milk and infant formulas, Pol. J. Nat. Sci., 2006, 21, 1105-1112.Suche in Google Scholar

[41] Rahimi E., Lead and cadmium concentrations in goat, cow, sheep, and buffalo milks from different regions of Iran, Food Chem., 2013, 136, 389-391.10.1016/j.foodchem.2012.09.016Suche in Google Scholar PubMed

[42] Farid S.M., Enani M.A., Wajdi S.A., Determination of trace elements in cow’s milk in Saudi Arabia, Journal of King Abdulaziz University Engineering Sciences, 2004, 15, 131-140.10.4197/Eng.15-2.9Suche in Google Scholar

[43] Bojakowska I., Sokołowska G., Effect of metal ore mining and metallurgy on trace elements contamination of alluvia of the river Odra, Przegląd Geologiczny, 1998, 46, 7, (in Polish).Suche in Google Scholar

[44] Linder M.C., Hazegh-Azam M., Copper biochemistry and molecular biology, Am. J. Clin. Nutr., 1996, 63, 5, 797S-811S.Suche in Google Scholar

[45] Miniuk K., Moniuszko-Jakoniuk J., Kulikowska E., Bioavailability and pathological states at copper deficit, Pol. Tyg. Lek., 1991, 46, 476-478, (in Polish).Suche in Google Scholar

[46] WHO. Toxicological evaluation of certain food additives: copper, zinc. WHO food additives series, 1992, 17.Suche in Google Scholar

[47] Maas S., Lucot E., Gimbert F., Crini N., Badot P-M., Trace metals in raw cows’ milk and assessment of transfer to Comté cheese, Food Chem., 2011, 129, 7–12.10.1016/j.foodchem.2010.09.034Suche in Google Scholar

[48] Piontek M., Fedyczak Z., Łuszczyńska K., Lechów H., Toxicity of copper, zinc, cadmium, mercury and lead for humans, vertebrates and aquatic organisms, Zeszyty Naukowe. Inżynieria Środowiska/Uniwersytet Zielonogórski, 2014, 155, 35, 70-83 (in Polish).Suche in Google Scholar

[49] Puzanowska-Tarasiewicz H., Kuźmicka L., Tarasiewicz M., Biological functions of selected elements. III. Zinc – component and activator of enzymes, Pol. Merk. Lek., 2009, 27, 419-422 (in Polish).Suche in Google Scholar

[50] Faa G., Nurchi V.M., Ravarino A., Fanni D., Nemolato S., Gerosa C., et al., Zinc in gastrointestinal and liver disease, Coord. Chem. Rev., 2008, 252, 1257-1269.10.1016/j.ccr.2007.09.024Suche in Google Scholar

[51] Meshref A.M.S., Moselhy W. A., Hassan N.E.H.Y., Heavy metals and trace elements levels in milk and milk products, Food Measure, 2014, 8, 381–388.10.1007/s11694-014-9203-6Suche in Google Scholar

Received: 2018-10-14
Accepted: 2019-02-23
Published Online: 2019-09-25

© 2019 Monika Sujka et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Artikel in diesem Heft

  1. Regular Articles
  2. Research on correlation of compositions with oestrogenic activity of Cistanche based on LC/Q-TOF-MS/MS technology
  3. Efficacy of Pyrus elaeagnifolia subsp. elaeagnifolia in acetic acid–induced colitis model
  4. Anti-inflammatory and antinociceptive features of Bryonia alba L.: As a possible alternative in treating rheumatism
  5. High efficiency liposome fusion induced by reducing undesired membrane peptides interaction
  6. Prediction of the Blood-Brain Barrier Permeability Using RP-18 Thin Layer Chromatography
  7. Phytic Acid Extracted from Rice Bran as a Growth Promoter for Euglena gracilis
  8. Development of a validated spectrofluorimetric method for assay of sotalol hydrochloride in tablets and human plasma: application for stability-indicating studies
  9. Topological Indices of Hyaluronic Acid-Paclitaxel Conjugates’ Molecular Structure in Cancer Treatment
  10. Thermodynamic properties of the bubble growth process in a pool boiling of water-ethanol mixture two-component system
  11. Critical Roles of the PI3K-Akt-mTOR Signaling Pathway in Apoptosis and Autophagy of Astrocytes Induced by Methamphetamine
  12. Characteristics of Stable Hydrogen and Oxygen Isotopes of Soil Moisture under Different Land Use in Dry Hot Valley of Yuanmou
  13. Specific, highly sensitive and simple spectrofluorimetric method for quantification of daclatasvir in HCV human plasma patients and in tablets dosage form
  14. Chromium-modified cobalt molybdenum nitrides as catalysts for ammonia synthesis
  15. Langerhans cell-like dendritic cells treated with ginsenoside Rh2 regulate the differentiation of Th1 and Th2 cells in vivo
  16. Identification of Powdery Mildew Blumeria graminis f. sp. tritici Resistance Genes in Selected Wheat Varieties and Development of Multiplex PCR
  17. Computational Analysis of new Degree-based descriptors of oxide networks
  18. The Use Of Chemical Composition And Additives To Classify Petrol And Diesel Using Gas Chromatography–Mass Spectrometry And Chemometric Analysis: A Uk Study
  19. Minimal Energy Tree with 4 Branched Vertices
  20. Jatropha seed oil derived poly(esteramide-urethane)/ fumed silica nanocomposite coatings for corrosion protection
  21. Calculating topological indices of certain OTIS interconnection networks
  22. Energy storage analysis of R125 in UIO-66 and MOF-5 nanoparticles: A molecular simulation study
  23. Velvet Antler compounds targeting major cell signaling pathways in osteosarcoma - a new insight into mediating the process of invasion and metastasis in OS
  24. Effects of Azadirachta Indica Leaf Extract, Capping Agents, on the Synthesis of Pure And Cu Doped ZnO-Nanoparticles: A Green Approach and Microbial Activity
  25. Aqueous Micro-hydration of Na+(H2O)n=1-7 Clusters: DFT Study
  26. A proposed image-based detection of methamidophos pesticide using peroxyoxalate chemiluminescence system
  27. Phytochemical screening and estrogenic activity of total glycosides of Cistanche deserticola
  28. Biological evaluation of a series of benzothiazole derivatives as mosquitocidal agents
  29. Chemical pretreatments of Trapa bispinosa's peel (TBP) biosorbent to enhance adsorption capacity for Pb(ll)
  30. Dynamic Changes in MMP1 and TIMP1 in the Antifibrotic Process of Dahuang Zhechong Pill in Rats with Liver Fibrosis
  31. The Optimization and Production of Ginkgolide B Lipid Microemulsion
  32. Photodynamic Therapy Enhanced the Antitumor Effects of Berberine on HeLa Cells
  33. Chiral and Achiral Enantiomeric Separation of (±)-Alprenolol
  34. Correlation of Water Fluoride with Body Fluids, Dental Fluorosis and FT4, FT3 –TSH Disruption among Children in an Endemic Fluorosis area in Pakistan
  35. A one-step incubation ELISA kit for rapid determination of dibutyl phthalate in water, beverage and liquor
  36. Free Radical Scavenging Activity of Essential Oil of Eugenia caryophylata from Amboina Island and Derivatives of Eugenol
  37. Effects of Blue and Red Light On Growth And Nitrate Metabolism In Pakchoi
  38. miRNA-199a-5p functions as a tumor suppressor in prolactinomas
  39. Solar photodegradation of carbamazepine from aqueous solutions using a compound parabolic concentrator equipped with a sun tracking system
  40. Influence of sub-inhibitory concentration of selected plant essential oils on the physical and biochemical properties of Pseudomonas orientalis
  41. Preparation and spectroscopic studies of Fe(II), Ru(II), Pd(II) and Zn(II) complexes of Schiff base containing terephthalaldehyde and their transfer hydrogenation and Suzuki-Miyaura coupling reaction
  42. Complex formation in a liquid-liquid extraction-chromogenic system for vanadium(IV)
  43. Synthesis, characterization (IR, 1H, 13C & 31P NMR), fungicidal, herbicidal and molecular docking evaluation of steroid phosphorus compounds
  44. Analysis and Biological Evaluation of Arisaema Amuremse Maxim Essential Oil
  45. A preliminary assessment of potential ecological risk and soil contamination by heavy metals around a cement factory, western Saudi Arabia
  46. Anti- inflammatory effect of Prunus tomentosa Thunb total flavones in LPS-induced RAW264.7 cells
  47. Collaborative Influence of Elevated CO2 Concentration and High Temperature on Potato Biomass Accumulation and Characteristics
  48. Methods of extraction, physicochemical properties of alginates and their applications in biomedical field – a review
  49. Characteristics of liposomes derived from egg yolk
  50. Preparation of ternary ZnO/Ag/cellulose and its enhanced photocatalytic degradation property on phenol and benzene in VOCs
  51. Influence of Human Serum Albumin Glycation on the Binding Affinities for Natural Flavonoids
  52. Synthesis and antioxidant activity of 2-methylthio-pyrido[3,2-e][1,2,4] triazolo[1,5-a]pyrimidines
  53. Comparative study on the antioxidant activities of ten common flower teas from China
  54. Molecular Properties of Symmetrical Networks Using Topological Polynomials
  55. Synthesis of Co3O4 Nano Aggregates by Co-precipitation Method and its Catalytic and Fuel Additive Applications
  56. Phytochemical analysis, Antioxidant and Antiprotoscolices potential of ethanol extracts of selected plants species against Echinococcus granulosus: In-vitro study
  57. Silver nanoparticles enhanced fluorescence for sensitive determination of fluoroquinolones in water solutions
  58. Simultaneous Quantification of the New Psychoactive Substances 3-FMC, 3-FPM, 4-CEC, and 4-BMC in Human Blood using GC-MS
  59. Biodiesel Production by Lipids From Indonesian strain of Microalgae Chlorella vulgaris
  60. Miscibility studies of polystyrene/polyvinyl chloride blend in presence of organoclay
  61. Antibacterial Activities of Transition Metal complexes of Mesocyclic Amidine 1,4-diazacycloheptane (DACH)
  62. Novel 1,8-Naphthyridine Derivatives: Design, Synthesis and in vitro screening of their cytotoxic activity against MCF7 cell line
  63. Investigation of Stress Corrosion Cracking Behaviour of Mg-Al-Zn Alloys in Different pH Environments by SSRT Method
  64. Various Combinations of Flame Retardants for Poly (vinyl chloride)
  65. Phenolic compounds and biological activities of rye (Secale cereale L.) grains
  66. Oxidative degradation of gentamicin present in water by an electro-Fenton process and biodegradability improvement
  67. Optimizing Suitable Conditions for the Removal of Ammonium Nitrogen by a Microbe Isolated from Chicken Manure
  68. Anti-inflammatory, antipyretic, analgesic, and antioxidant activities of Haloxylon salicornicum aqueous fraction
  69. The anti-corrosion behaviour of Satureja montana L. extract on iron in NaCl solution
  70. Interleukin-4, hemopexin, and lipoprotein-associated phospholipase A2 are significantly increased in patients with unstable carotid plaque
  71. A comparative study of the crystal structures of 2-(4-(2-(4-(3-chlorophenyl)pipera -zinyl)ethyl) benzyl)isoindoline-1,3-dione by synchrotron radiation X-ray powder diffraction and single-crystal X-ray diffraction
  72. Conceptual DFT as a Novel Chemoinformatics Tool for Studying the Chemical Reactivity Properties of the Amatoxin Family of Fungal Peptides
  73. Occurrence of Aflatoxin M1 in Milk-based Mithae samples from Pakistan
  74. Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination
  75. Increasing the activity of DNAzyme based on the telomeric sequence: 2’-OMe-RNA and LNA modifications
  76. Exploring the optoelectronic properties of a chromene-appended pyrimidone derivative for photovoltaic applications
  77. Effect of He Qi San on DNA Methylation in Type 2 Diabetes Mellitus Patients with Phlegm-blood Stasis Syndrome
  78. Cyclodextrin potentiometric sensors based on selective recognition sites for procainamide: Comparative and theoretical study
  79. Greener synthesis of dimethyl carbonate from carbon dioxide and methanol using a tunable ionic liquid catalyst
  80. Nonisothermal Cold Crystallization Kinetics of Poly(lactic acid)/Bacterial Poly(hydroxyoctanoate) (PHO)/Talc
  81. Enhanced adsorption of sulfonamide antibiotics in water by modified biochar derived from bagasse
  82. Study on the Mechanism of Shugan Xiaozhi Fang on Cells with Non-alcoholic Fatty Liver Disease
  83. Comparative Effects of Salt and Alkali Stress on Antioxidant System in Cotton (Gossypium Hirsutum L.) Leaves
  84. Optimization of chromatographic systems for analysis of selected psychotropic drugs and their metabolites in serum and saliva by HPLC in order to monitor therapeutic drugs
  85. Electrocatalytic Properties of Ni-Doped BaFe12O19 for Oxygen Evolution in Alkaline Solution
  86. Study on the removal of high contents of ammonium from piggery wastewater by clinoptilolite and the corresponding mechanisms
  87. Phytochemistry and toxicological assessment of Bryonia dioica roots used in north-African alternative medicine
  88. The essential oil composition of selected Hemerocallis cultivars and their biological activity
  89. Mechanical Properties of Carbon Fiber Reinforced Nanocrystalline Nickel Composite Electroforming Deposit
  90. Anti-c-myc efficacy block EGFL7 induced prolactinoma tumorigenesis
  91. Topical Issue on Applications of Mathematics in Chemistry
  92. Zagreb Connection Number Index of Nanotubes and Regular Hexagonal Lattice
  93. The Sanskruti index of trees and unicyclic graphs
  94. Valency-based molecular descriptors of Bakelite network BNmn
  95. Computing Topological Indices for Para-Line Graphs of Anthracene
  96. Zagreb Polynomials and redefined Zagreb indices of Dendrimers and Polyomino Chains
  97. Topological Descriptor of 2-Dimensional Silicon Carbons and Their Applications
  98. Topological invariants for the line graphs of some classes of graphs
  99. Words for maximal Subgroups of Fi24
  100. Generators of Maximal Subgroups of Harada-Norton and some Linear Groups
  101. Special Issue on POKOCHA 2018
  102. Influence of Production Parameters on the Content of Polyphenolic Compounds in Extruded Porridge Enriched with Chokeberry Fruit (Aronia melanocarpa (Michx.) Elliott)
  103. Effects of Supercritical Carbon Dioxide Extraction (SC-CO2) on the content of tiliroside in the extracts from Tilia L. flowers
  104. Impact of xanthan gum addition on phenolic acids composition and selected properties of new gluten-free maize-field bean pasta
  105. Impact of storage temperature and time on Moldavian dragonhead oil – spectroscopic and chemometric analysis
  106. The effect of selected substances on the stability of standard solutions in voltammetric analysis of ascorbic acid in fruit juices
  107. Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland
  108. Special Issue on IC3PE 2018 Conference
  109. The Photocatalytic Activity of Zns-TiO2 on a Carbon Fiber Prepared by Chemical Bath Deposition
  110. N-octyl chitosan derivatives as amphiphilic carrier agents for herbicide formulations
  111. Kinetics and Mechanistic Study of Hydrolysis of Adenosine Monophosphate Disodium Salt (AMPNa2) in Acidic and Alkaline Media
  112. Antimalarial Activity of Andrographis Paniculata Ness‘s N-hexane Extract and Its Major Compounds
  113. Special Issue on ABB2018 Conference
  114. Special Issue on ICCESEN 2017
  115. Theoretical Diagnostics of Second and Third-order Hyperpolarizabilities of Several Acid Derivatives
  116. Determination of Gamma Rays Efficiency Against Rhizoctonia solani in Potatoes
  117. Studies On Compatibilization Of Recycled Polyethylene/Thermoplastic Starch Blends By Using Different Compatibilizer
  118. Liquid−Liquid Extraction of Linalool from Methyl Eugenol with 1-Ethyl-3-methylimidazolium Hydrogen Sulfate [EMIM][HSO4] Ionic Liquid
  119. Synthesis of Graphene Oxide Through Ultrasonic Assisted Electrochemical Exfoliation
  120. Special Issue on ISCMP 2018
  121. Synthesis and antiproliferative evaluation of some 1,4-naphthoquinone derivatives against human cervical cancer cells
  122. The influence of the grafted aryl groups on the solvation properties of the graphyne and graphdiyne - a MD study
  123. Electrochemical modification of platinum and glassy carbon surfaces with pyridine layers and their use as complexing agents for copper (II) ions
  124. Effect of Electrospinning Process on Total Antioxidant Activity of Electrospun Nanofibers Containing Grape Seed Extract
  125. Effect Of Thermal Treatment Of Trepel At Temperature Range 800-1200˚C
  126. Topical Issue on Agriculture
  127. The effect of Cladophora glomerata exudates on the amino acid composition of Cladophora fracta and Rhizoclonium sp.
  128. Influence of the Static Magnetic Field and Algal Extract on the Germination of Soybean Seeds
  129. The use of UV-induced fluorescence for the assessment of homogeneity of granular mixtures
  130. The use of microorganisms as bio-fertilizers in the cultivation of white lupine
  131. Lyophilized apples on flax oil and ethyl esters of flax oil - stability and antioxidant evaluation
  132. Production of phosphorus biofertilizer based on the renewable materials in large laboratory scale
  133. Human health risk assessment of potential toxic elements in paddy soil and rice (Oryza sativa) from Ugbawka fields, Enugu, Nigeria
  134. Recovery of phosphates(V) from wastewaters of different chemical composition
  135. Special Issue on the 4th Green Chemistry 2018
  136. Dead zone for hydrogenation of propylene reaction carried out on commercial catalyst pellets
  137. Improved thermally stable oligoetherols from 6-aminouracil, ethylene carbonate and boric acid
  138. The role of a chemical loop in removal of hazardous contaminants from coke oven wastewater during its treatment
  139. Combating paraben pollution in surface waters with a variety of photocatalyzed systems: Looking for the most efficient technology
  140. Special Issue on Chemistry Today for Tomorrow 2019
  141. Applying Discriminant and Cluster Analyses to Separate Allergenic from Non-allergenic Proteins
  142. Chemometric Expertise Of Clinical Monitoring Data Of Prolactinoma Patients
  143. Chemomertic Risk Assessment of Soil Pollution
  144. New composite sorbent for speciation analysis of soluble chromium in textiles
  145. Photocatalytic activity of NiFe2O4 and Zn0.5Ni0.5Fe2O4 modified by Eu(III) and Tb(III) for decomposition of Malachite Green
  146. Photophysical and antibacterial activity of light-activated quaternary eosin Y
  147. Spectral properties and biological activity of La(III) and Nd(III) Monensinates
  148. Special Issue on Monitoring, Risk Assessment and Sustainable Management for the Exposure to Environmental Toxins
  149. Soil organic carbon mineralization in relation to microbial dynamics in subtropical red soils dominated by differently sized aggregates
  150. A potential reusable fluorescent aptasensor based on magnetic nanoparticles for ochratoxin A analysis
  151. Special Issue on 13th JCC 2018
  152. Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+
  153. Thermal and Morphology Properties of Cellulose Nanofiber from TEMPO-oxidized Lower part of Empty Fruit Bunches (LEFB)
  154. Encapsulation of Vitamin C in Sesame Liposomes: Computational and Experimental Studies
  155. A comparative study of the utilization of synthetic foaming agent and aluminum powder as pore-forming agents in lightweight geopolymer synthesis
  156. Synthesis of high surface area mesoporous silica SBA-15 by adjusting hydrothermal treatment time and the amount of polyvinyl alcohol
  157. Review of large-pore mesostructured cellular foam (MCF) silica and its applications
  158. Ion Exchange of Benzoate in Ni-Al-Benzoate Layered Double Hydroxide by Amoxicillin
  159. Synthesis And Characterization Of CoMo/Mordenite Catalyst For Hydrotreatment Of Lignin Compound Models
  160. Production of Biodiesel from Nyamplung (Calophyllum inophyllum L.) using Microwave with CaO Catalyst from Eggshell Waste: Optimization of Transesterification Process Parameters
  161. The Study of the Optical Properties of C60 Fullerene in Different Organic Solvents
  162. Composite Material Consisting of HKUST-1 and Indonesian Activated Natural Zeolite and its Application in CO2 Capture
  163. Topical Issue on Environmental Chemistry
  164. Ionic liquids modified cobalt/ZSM-5 as a highly efficient catalyst for enhancing the selectivity towards KA oil in the aerobic oxidation of cyclohexane
  165. Application of Thermal Resistant Gemini Surfactants in Highly Thixotropic Water-in-oil Drilling Fluid System
  166. Screening Study on Rheological Behavior and Phase Transition Point of Polymer-containing Fluids produced under the Oil Freezing Point Temperature
  167. The Chemical Softening Effect and Mechanism of Low Rank Coal Soaked in Alkaline Solution
  168. The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst
  169. Special Issue on the International conference CosCI 2018
  170. Design of SiO2/TiO2 that Synergistically Increases The Hydrophobicity of Methyltrimethoxysilane Coated Glass
  171. Antidiabetes and Antioxidant agents from Clausena excavata root as medicinal plant of Myanmar
  172. Development of a Gold Immunochromatographic Assay Method Using Candida Biofilm Antigen as a Bioreceptor for Candidiasis in Rats
  173. Special Issue on Applied Biochemistry and Biotechnology 2019
  174. Adsorption of copper ions on Magnolia officinalis residues after solid-phase fermentation with Phanerochaete chrysosporium
  175. Erratum
  176. Erratum to: Sand Dune Characterization For Preparing Metallurgical Grade Silicon
Heruntergeladen am 5.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/chem-2019-0072/html
Button zum nach oben scrollen