Home Mechanical Properties of Carbon Fiber Reinforced Nanocrystalline Nickel Composite Electroforming Deposit
Article Open Access

Mechanical Properties of Carbon Fiber Reinforced Nanocrystalline Nickel Composite Electroforming Deposit

  • Wanghuan Qian EMAIL logo , Zhangyong Yu and Tao Zhang
Published/Copyright: December 31, 2019
Download Article (PDF)
Open Chemistry
From the journal Open Chemistry Volume 17 Issue 1

Abstract

In order to obtain higher strength fiber reinforced composite electroforming deposit, carbon fiber reinforced nanocrystalline nickel composite electroforming deposit was prepared by electrodepositing with pulse current and a flexible wheel was applied to rub and extrude the electroforming deposit. Results shown that when the grains of the carbon fiber reinforced nickel composite electroforming deposit were refined from micron to 80nm at room temperature, the microhardness increased from 230Hv to 740Hv, and the tensile strength increased from 1025MPa to 1472MPa. With the further refinement of the grains of the electroforming deposit, the tensile strength decreased significantly due to the decrease of the bonding strength between the carbon fiber and the nickel matrix, while the microhardness still increased to 758Hv. At 200°C, the carbon fiber reinforced nanocrystalline nickel composite electroforming deposit still showed high strength. When the temperature rose to 400°C, the influence of nanocrystalline on the tensile strength of the carbon fiber reinforced nickel composite electroforming deposit was no longer significant, due to the rapid growth of crystal grains and the precipitation of interfacial brittle substances.

Keywords: nanocrystalline; carbon fiber; tensile strength; microhardness; medium temperature; nickel

Electroforming is a special processing technology for manufacturing metal parts by using the principle of metal ion cathodic electrodeposition. It has been successfully applied in high-tech fields such as precision molds, aerospace, weapons and micro-nano manufacturing [1, 2, 3]. Tensile strength is an important performance of electroforming deposit. Increasing the tensile strength of electroforming deposit is one of the hot-spots in electroforming technology. Some scholars have proposed that the high-strength fiber can be applied to reinforce electroforming deposit, which significantly improves the strength of electroforming deposit [4, 5]. For example, Suchentrunk [4], a member of the European Aerospace Defense & Space (EADS), used boron fiber, silicon carbide fiber and other lightweight high-strength fiber to reinforce the nickel, copper and aluminum by electroforming, and the composite shown high tensile strength.

According to the formula of the mix rule, the strength σ c of the composite electroforming deposit in the direction of fiber reinforcement can theoretically be calculated. The formula is as follows:

(1)σc=σfVf+σmVm=σfVf+σm1−Vf

In the formula, σf is the strength of the reinforcing fiber, σm is the strength of the matrix metal. Vf is the volume fraction of the fiber, and Vm is the volume fraction of the matrix metal.

It can be known from formula (1) that increasing the volume fraction of reinforcing fiber can increase the tensile strength of the composite electroforming deposit. It is the research hotspot which most scholars have focused on. However, it is found that a large amount of pores will be generated inside the composite electroforming deposit when the volume fraction of the fiber is too high, which can reduce the strength of the electroforming deposit [6, 7].

It can also be found from the formula (1) that the tensile strength of the fiber reinforced composite electroforming deposit is not only related to the strength and volume fraction of the fiber, but also closely related to the tensile strength of the matrix metal. Existing research by many scholars has shown that the performance of electroforming deposit can be significantly improved by changing the electroforming process. For example, Lei et al. [8] used high-frequency narrow pulse width pulse current for high-speed liquid electroforming, and obtained the nickel electroforming deposit with the tensile strength of 1160MPa. Urb et al. [9] refined the electroforming deposit grains by adding saccharin to the electroforming solution, which greatly improved the tensile strength and microhardness of the nickel electroforming deposit. Zhu [10] used insulating ceramic microbeads to rub the surface of the cathode during electroforming, which could remove hydrogen and refine crystal grains, and increased the tensile strength of electroforming nickel from 605MPa to 1410MPa.

In this paper, the method of refining the grain size to nano-scale, was proposed to fabricated composite electroforming deposit with higher tensile strength composite and carbon fiber reinforced nanocrystalline nickel composite electroforming deposit was taken as an example to study the effect of nanocrystalline on the tensile strength and microhardness of composite electroforming deposit.

1 Experiments

According to the metal electrodeposition principle [11], the grain size of the deposition mainly depends on two factors, which are the growth rate of the crystal nucleus and the crystal grains. If the growth rate of the crystal nucleus is greater than the growth rate of the crystal grains, the crystal grains are many and small, and the grains of the deposition are fine and dense. The cathodic polarization overpotential is the driving force of electro-crystallization. The larger overpotential will lead to smaller nucleation radius, higher growth rate and finer crystal. The advantage of pulse current over direct current is that it generates high peak current at the same average current which makes electrodeposition performed at a higher overpotential. As a result, finer grains are deposited [12]. Sulfonimide additives can directly inhibit the growth of crystal grains, increase the difficulty of crystallizing, and increase the cathode overpotential [13]. Both the pulse current and the additive were applied in this experiment. The pulse power supply used was produced by Shanghai Riyi Technology Co., Ltd., the current ranges from 0A to 30A, the voltage ranges from 0V to 30V, the duty cycle ranges from 0% to 100%, and the frequency is 2kHz. The output waveform is a square wave, as shown in Figure 1, where T is the pulse period; ton is the pulse width; toff is the intrapulse; im is the average current density.

Figure 1 Schematic diagram of the square wave pulse current.
Figure 1

Schematic diagram of the square wave pulse current.

The entire experimental apparatus is shown in Figure 2. The circulating heating filter system mainly consisted of a liquid storage tank, a heating pipe, a thermocouple, a magnetic pump and a filter, which could ensure the cleanness of the electroforming solution and the constant of the temperature. The carbon fiber winding system mainly consisted of carbon fiber, a filament storage tube, a rotation motor, a horizontal axis, and a cathode. The carbon fiber was taken out from the filament storage tube and fixed on the surface of the cathode. The motor rotated to drive the carbon fiber entangle on the cathode, and the controller drove the carbon fiber to reciprocate in the horizontal direction, so that the carbon fiber gradually covered the entire surface of the cathode After the power was turned on, metal nickel was continuously deposited on the surface of the cathode and the carbon fiber and the carbon fiber was gradually wrapped therein. The volume fraction of carbon fiber was determined by the current density, the rotational speed of the motor, and the moving speed of the horizontal axis.

Figure 2 Schematic diagram of the experimental apparatus.
Figure 2

Schematic diagram of the experimental apparatus.

A flexible wheel was arranged to be in close contact with the cathode. During the electroforming process, the flexible wheel continuously squeezed and rubbed the carbon fiber and the deposited nickel, which could improve the compactness of the composite electroforming deposit and improve its mechanical properties. The core of the flexible wheel was PVC plastic which wrapped with the felt cloth, as shown in Figure 3.

Figure 3 Schematic diagram of the flexible wheel.
Figure 3

Schematic diagram of the flexible wheel.

The type of the carbon fiber used was T300B-1K produced by Toray Industries, and the diameter of the monofilament was about 8 to 10 μm. As shown in Table 1, the carbon fiber has excellent electrical conductivity and high specific strength. In order to improve the bonding performance between carbon fiber and electrodeposited nickel, carbon fiber should be pretreated before electroforming, such as degreasing, degumming and roughening.

Table 1

The properties of the carbon fiber.

PropertiesElastic modulusTensile strengthDensitySpecificAverage diameterResistivity
/Gpa/Mpa/kg m3strength(μm)(μΩ cm)
Values23035301.76×10328-101.6×103

The low-stress sulfamate electroforming solution whose composition shown in Table 2 was selected as the solution. All the reagents used were analytically pure and prepared by deionized water. The pH value and the temperature of the solution were maintained at 4.5 and 43°C separately during the whole reaction.

Table 2

The composition of the solution.

NickelBoricNickelSodium dodecyl
sulfamateacidchloridesulfate
Content50030150.05
g/L

The high purity sulfur-free nickel beads from Canadian INCO Metals Co., Ltd., were employed as the anode. In order to prevent the slag from oozing out, the nickel beads were wrapped with polyester cloth after being degreased and cleaned, and placed in an electroforming tank.

The cathode was a cylindrical hollow aluminum rod with an outer diameter of 15 mm, and the actual electrodeposited area was estimated to be about 0.47 dm2. After being subjected to degreasing, polishing, weak etching and so on, it was placed in the electroforming tank.

By changing the peak current density and controlling the electric quantity, carbon fiber reinforced nanocrystalline nickel composite electroforming deposit with different grain sizes and the same thickness of 150μm were prepared. The carbon fiber was completely buried in the nickel electroforming deposit, and the structure of the deposited layer was dense with no pinholes. Since the carbon fiber has strong electrical conductivity, the surface of the deposits where the wire was laid had protrusions.

The surface was leveled on a lathe where the excess nickel was removed. The composite electroforming deposit was cut into ring-shaped pieces with 9 mm width by WEDM (wire electrical discharge machining). And then, the pieces were tested for tensile strength.

The microhardness of the carbon fiber reinforced nanocrystalline nickel composite electroforming deposit was tested by HVS-1000A digital microhardness tester with a load of 500g and a holding time of 10s. The hardness value was measured at 5 points on the surface, and the average value was taken as the microhardness of the composite electroforming deposit.

The method of filament pull-out was employed to test the bonding strength of carbon fiber-nickel interface at different conditions.

Ethical approval: The conducted research is not related to either human or animal use.

2 Results and discussions

2.1 Microstructure of carbon fiber-nanocrystalline nickel composite electroforming deposit

Figure 4 is the transmission electron microscope (TEM) images of the carbon fiber reinforced nanocrystalline nickel composite electroforming deposit obtained at different peak current densities with the duty cycle of 10% and frequency of 2 kHz. It can be seen from the figure that as the peak current density increases, the average grain size of the composite electroformed layer decreases significantly. When the peak current density increases from 15 A/dm2 to 120 A/dm2, the average grain size of the composite reduces from 200nm to 40nm which means the grain size is remarkably refined.

Figure 4 TEM images of the composite electroforming deposit at different peak current densities.
Figure 4

TEM images of the composite electroforming deposit at different peak current densities.

2.2 Microhardness

Figure 5 is a graph showing the change of the microhardness of the carbon fiber reinforced nanocrystalline nickel composite electroforming deposit with grain size, and the carbon fiber volume fraction is 40%. It can be seen from the figure that when the grain size of the carbon fiber-nickel composite electroforming deposit is refined from 200nm to 40nm, the microhardness of the composite electroforming deposit gradually increases from 562Hv to 758Hv. It can also be seen from the figure that when the grain size is refined to below 80nm, the rate of the incensement of the microhardness slows down gradually. For comparison, the composite electrodeposited by a DC power under the same conditions was tested and found to have the hardness of only 230Hv. It can be seen that the nanocrystalline has a great improvement effect on the hardness of the composite.

Figure 5 Influence of nanocrystalline on the microhardness of carbon fiber composite electroforming deposit.
Figure 5

Influence of nanocrystalline on the microhardness of carbon fiber composite electroforming deposit.

2.3 The Influence of nanocrystalline on the tensile strength of composite electroforming deposit

The tensile strength of composite electroforming deposit with different grain sizes and the same 40% carbon fiber volume fraction was tested, and the grain size–tensile strength curve is shown in Figure 6. From this figure, it can be found that when the grain size of the composite electroforming deposit is refined from 200nm to 40nm, the tensile strength of carbon fiber - nanocrystalline nickel composite electroforming deposit first rises and then decreases. When the grain size is 80nm, the tensile strength of the composite material reaches up to 1472 Mpa while the tensile strength of the composite is only 1238 Mpa and 1198 Mpa when the grain is 40nm and 200nm respectively. According to the experiment, the tensile strength of the carbon fiber – micron-crystalline nickel composite electroforming deposit with the same volume fraction is only 1023 Mpa.. It can be seen that nanocrystalline can obviously improve the tensile strength of carbon fiber reinforced nickel composite electroforming deposit.

Figure 6 Influence of grain size on the tensile strength of carbon fiber reinforced nanocrystalline nickel composite electroforming deposit.
Figure 6

Influence of grain size on the tensile strength of carbon fiber reinforced nanocrystalline nickel composite electroforming deposit.

According to the law of Hall-Petch, the change of strength properties σ with the grain size d in ordinary polycrystalline metal materials is usually in accordance with the following relationship:

(2)σ=σ0+Kd−12

In this formula, σ0 is constant, K is elastic coefficient, and d is grain size. In theory, with the grain refinement, the strength of the metal matrix should always increase. According to formula (1), it is concluded that the fiber reinforced composite materials should always increase with the grain refinement, but it is inconsistent with the actual results. The reason is that the strength of fiber reinforced composite materials is not only related to the strength of fiber and metal, but also related to the bonding strength of both. Therefore, the bonding strength between carbon fiber and nanocrystalline nickel matrix was tested by the method of filament pull-out, and the result is shown in Figure 7 - the change of bonding strength with grain size is not constant. When the grain size is larger than 80nm, the bonding strength increases with the decrease of the grain size. This is because nanocrystalline not only reduces the porosity, but also increase the density of the electroforming deposit. The nickel atoms, which reduced by the nickel ions, accumulated on the surface of the rough carbon fibers, filled the rough pits in the surface of the carbon fibers and gradually wrap the carbon fibers to form an interface. Compared to the micron-crystalline, the refined grains make the fibers tightly hooped therein. When the carbon fibers were peeled off from the nickel matrix, the high interfacial density significantly increased the difficulty of destruction, which exhibited high bonding strength in a macroscopic manner. Therefore, when the grain size was in this interval, the tensile strength of the carbon fiber - nanocrystalline nickel composite electroforming deposit increased remarkably as both the bonding strength and the matrix strength increased. When the grains were lower than 80nm, the bonding strength began to show a very significant downward trend. This is because the finer nanocrystalline was obtained by increasing the peak current density in this experiment. As the peak current density increased, a large amount of hydrogen was adsorbed on the surface of the carbon fibers, causing the electroforming deposit to generate pinholes around the carbon fibers. While the nanocrystalline interface was so sensitive that small defects will cause a significant drop in performance. As a medium for transferring and dispersing the load from the matrix to the fibers, the interface must have a high bonding strength. Otherwise, once the interface is destroyed or deboned in a large area, the material will be broken in advance [14, 15], which means the tensile strength will far below the value calculated according to formula (1). Therefore, when the grain was refined to below 80nm, the tensile strength of the carbon fiber-nanocrystalline nickel composite electroforming deposit began to decrease.

Figure 7 Influence of nanocrystalline on the bonding strength between carbon fiber and nickel matrix.
Figure 7

Influence of nanocrystalline on the bonding strength between carbon fiber and nickel matrix.

2.4 Strength properties at medium temperature

Since nickel matrix materials are mainly used in higher temperatures, the tensile strength at medium temperature is particularly important. Figure 8 shows the relationship between grain size and tensile strength of carbon fiber reinforced nanocrystalline nickel composite electroforming deposit at 200°C and 400°C. The volume fraction of carbon fibers was 40% in the composite electroforming deposit.

Figure 8 Influence of nanocrystalline on the tensile strength of carbon fiber reinforced nickel composite electroforming deposit at medium temperature.
Figure 8

Influence of nanocrystalline on the tensile strength of carbon fiber reinforced nickel composite electroforming deposit at medium temperature.

It can be seen from the figure that the tensile strength of the carbon fiber reinforced nanocrystalline nickel composite material at 200°C was above 1000MPa, while the tensile strength of the carbon fiber reinforced micron-crystalline nickel composite electroforming deposit at 200°C was only 923 MPa from the other test. Furthermore, the tensile strength of carbon fiber reinforced nanocrystalline nickel composite material with 80nm grain size was up to 1258MPa. Therefore, nanocrystalline can significantly improve the tensile strength of the carbon fiber reinforced composite electroforming deposit at 200°C. Comparing Figure 7 and Figure 8, it can be found that the influence of grain size on the composite electroforming deposit at 200°C was basically consistent with the influence at room temperature.

According to Figure 8, the tensile strength of the nanocrystalline composite electroforming deposit was approximately from 710MPa to 750 MPa at 400°C, comparing to the tensile strength of 623 MPa which shown by the micron-crystalline composite electroforming deposit. Therefore, the nanocrystalline showed little influence on the tensile strength at 400°C. The main reason is that the electrodeposited nanocrystalline began to grow up rapidly after 250°C, and also the thermal stability of the deposited layer decreased. As the temperature increased further, the grain growth of the deposited layer became more and more obvious, and the ability of the deposited layer to resist external force deformation was weakened, and the tensile strength was significantly reduced [16]. Second, carbon fiber and nickel will reflect at a high temperature of 400°C, which reduced the strength of carbon fiber. In addition, the reaction product precipitated rapidly at the interface, resulting in a significant increase in brittleness and a sharp deterioration in plasticity, leading to a significant decrease in strength [17]. Therefore, at 400°C, the refinement of grain size had little effect on the tensile strength of the composite electroforming deposit.

3 Conclusions

  1. When the grain size of the carbon fiber-nickel composite electroforming deposit was refined from micron to 40nm, the microhardness increased from 230 Hv to 758 Hv.

  2. The tensile strength of the carbon fiber-nanocrystalline nickel composite electroforming deposit first increased and then decreased with the grain refinement, reaching a maximum value of 1472MPa when the grain size is 80nm.

  3. The bonding strength between carbon fiber and nickel matrix had an important influence on the tensile strength of composite electroforming deposit. When the grain size was refined from 80nm to 40nm, the tensile strength of the composite electroforming deposit was also significantly reduced due to the decrease in bonding strength.

  4. At 200°C, the tensile strength of nanocrystalline on carbon fiber-nanocrystalline nickel composite electroforming deposit still had obvious enhancement effect. But at 400°C, due to the rapid growth of crystal grains and the precipitation of brittle substances on the interface, the influence of nanocrystalline on the tensile strength of composite electroforming deposit was no longer significant.

Acknowledgment

The work described in this paper was partly supported by the National Natural Science Foundation of China (Grant No.51505192) and partly supported by the Qinglan Project of Jiangsu Province, China.

  1. Conflict of interest: Authors declare no conflict of interest.

References

[1] Tanabe Y., Nishikawa H., Seki Y., et al., Electroforming of Ni mold for imprint lithography using high-aspect-ratio PMMA microstructures fabricated by proton beam writing, Microelectronic Engineering, 2011, 88(8), 2145-2148.10.1016/j.mee.2011.01.019Search in Google Scholar

[2] Tang P.T., Electroforming: from rocket engines to nanotweezers, Micro and Nanosystems, 2011, 3(3), 180-187.10.3850/978-981-08-6555-9_190Search in Google Scholar

[3] Meier R., Producing components with precision technology, Medical Device & Diagnostic Industry Magazine, 2005.Search in Google Scholar

[4] Suchentrunk R., Metal matrix composites produced by electroplating. a review on technology and applications, Nanostructured Thin Films and Nanodispersion Strengthened Coatings, 2004, 155 ,241-250.10.1007/1-4020-2222-0_24Search in Google Scholar

[5] Luo X.T., Wu Q.L., Huang Q.J., et al., Investigated of fiber-reinforced metallic matrix composites prepared by electrochemical method, Journal of Xiamen University (Natural Science), 2003, 42(6), 747-750.Search in Google Scholar

[6] Greco V.P., Evaluation of filament-reinforced electrocomposites (reinforcement of electroforms with continuous filaments), Army Armament Research, Development And Engineering Center Watervliet Ny Bene T Weapons Lab, 1987.Search in Google Scholar

[7] Kuboyama K., Ishibashi T., Uchio S., Fabrication of metal matrix composite by electroforming technique, International Journal of Materials and Product Technology, 2001, 16(1-3), 67-73.10.1504/IJMPT.2001.005397Search in Google Scholar

[8] Lei W.N., Zhu D., Qu N.S., Synthesis of nanocrystalline nickel in pulse deposition, Transactions of the Institute of Metal Finishing, 2002, 80(6), 205-212.10.1080/00202967.2002.11871469Search in Google Scholar

[9] Erb U., Electrodeposited nanocrystals: synthesis, properties and industrial applications, Nanostructured Materials, 1995, 6(5-8), 533-538.10.1016/0965-9773(95)00114-XSearch in Google Scholar

[10] Zhu Z.W., Research and application of abrasive-assisted precision electroforming, Nanjing: Nanjing University of Aeronautics and Astronautics, 2007, 54-56.Search in Google Scholar

[11] Li D., Principle of electrochemical, Beijing: Beihang University Press, 2008, 286-298.Search in Google Scholar

[12] Tu Z.M., Li N., Hu H.L., et al., Technology of electrodepositing nanocrystalline materials, Beijing: National Defense Industry Press, 2008, 22-25.Search in Google Scholar

[13] Wang Y., Yuan X.T., Yu H.Y., et al., Impact of saccharin on the structure and performance of pulse electrodeposited Ni coatings, Materials Protection, 2011, 44(9), 44-47.Search in Google Scholar

[14] Peters P.W.M., Hemptenmacher J., Schurmann H., The fibre/matrix interface and its influence on mechanical and physical properties of Cu-MMC, Composites Science and Technology, 2010, 70(9), 1321-1329.10.1016/j.compscitech.2010.04.007Search in Google Scholar

[15] Zhang G.D., Zhao C.Z., Metal matrix composites, Shanghai: Shanghai Jiaotong University Press, 1996, 11-13.Search in Google Scholar

[16] Yin W.M., Whang S.H., Mirshams R., et al., Creep behavior of nanocrystalline nickel at 290 and 373 K, Materials Science and Engineering: A, 2001, 301(1), 18-22.10.1016/S0921-5093(00)01385-XSearch in Google Scholar

[17] Ba Z.X., Dai Y.M., Zhang Z.Z., et al., Influence of saccharin sodium on microstructure and performance of electrodeposited nanaocrystalline Ni coating, Trans. Mater. Heat Treat, 2010, 31(9), 137-141.Search in Google Scholar

Received: 2019-08-15
Accepted: 2019-11-13
Published Online: 2019-12-31

© 2019 Wanghuan Qian, Zhangyong Yu, Tao Zhang, published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Articles in the same Issue

  1. Regular Articles
  2. Research on correlation of compositions with oestrogenic activity of Cistanche based on LC/Q-TOF-MS/MS technology
  3. Efficacy of Pyrus elaeagnifolia subsp. elaeagnifolia in acetic acid–induced colitis model
  4. Anti-inflammatory and antinociceptive features of Bryonia alba L.: As a possible alternative in treating rheumatism
  5. High efficiency liposome fusion induced by reducing undesired membrane peptides interaction
  6. Prediction of the Blood-Brain Barrier Permeability Using RP-18 Thin Layer Chromatography
  7. Phytic Acid Extracted from Rice Bran as a Growth Promoter for Euglena gracilis
  8. Development of a validated spectrofluorimetric method for assay of sotalol hydrochloride in tablets and human plasma: application for stability-indicating studies
  9. Topological Indices of Hyaluronic Acid-Paclitaxel Conjugates’ Molecular Structure in Cancer Treatment
  10. Thermodynamic properties of the bubble growth process in a pool boiling of water-ethanol mixture two-component system
  11. Critical Roles of the PI3K-Akt-mTOR Signaling Pathway in Apoptosis and Autophagy of Astrocytes Induced by Methamphetamine
  12. Characteristics of Stable Hydrogen and Oxygen Isotopes of Soil Moisture under Different Land Use in Dry Hot Valley of Yuanmou
  13. Specific, highly sensitive and simple spectrofluorimetric method for quantification of daclatasvir in HCV human plasma patients and in tablets dosage form
  14. Chromium-modified cobalt molybdenum nitrides as catalysts for ammonia synthesis
  15. Langerhans cell-like dendritic cells treated with ginsenoside Rh2 regulate the differentiation of Th1 and Th2 cells in vivo
  16. Identification of Powdery Mildew Blumeria graminis f. sp. tritici Resistance Genes in Selected Wheat Varieties and Development of Multiplex PCR
  17. Computational Analysis of new Degree-based descriptors of oxide networks
  18. The Use Of Chemical Composition And Additives To Classify Petrol And Diesel Using Gas Chromatography–Mass Spectrometry And Chemometric Analysis: A Uk Study
  19. Minimal Energy Tree with 4 Branched Vertices
  20. Jatropha seed oil derived poly(esteramide-urethane)/ fumed silica nanocomposite coatings for corrosion protection
  21. Calculating topological indices of certain OTIS interconnection networks
  22. Energy storage analysis of R125 in UIO-66 and MOF-5 nanoparticles: A molecular simulation study
  23. Velvet Antler compounds targeting major cell signaling pathways in osteosarcoma - a new insight into mediating the process of invasion and metastasis in OS
  24. Effects of Azadirachta Indica Leaf Extract, Capping Agents, on the Synthesis of Pure And Cu Doped ZnO-Nanoparticles: A Green Approach and Microbial Activity
  25. Aqueous Micro-hydration of Na+(H2O)n=1-7 Clusters: DFT Study
  26. A proposed image-based detection of methamidophos pesticide using peroxyoxalate chemiluminescence system
  27. Phytochemical screening and estrogenic activity of total glycosides of Cistanche deserticola
  28. Biological evaluation of a series of benzothiazole derivatives as mosquitocidal agents
  29. Chemical pretreatments of Trapa bispinosa's peel (TBP) biosorbent to enhance adsorption capacity for Pb(ll)
  30. Dynamic Changes in MMP1 and TIMP1 in the Antifibrotic Process of Dahuang Zhechong Pill in Rats with Liver Fibrosis
  31. The Optimization and Production of Ginkgolide B Lipid Microemulsion
  32. Photodynamic Therapy Enhanced the Antitumor Effects of Berberine on HeLa Cells
  33. Chiral and Achiral Enantiomeric Separation of (±)-Alprenolol
  34. Correlation of Water Fluoride with Body Fluids, Dental Fluorosis and FT4, FT3 –TSH Disruption among Children in an Endemic Fluorosis area in Pakistan
  35. A one-step incubation ELISA kit for rapid determination of dibutyl phthalate in water, beverage and liquor
  36. Free Radical Scavenging Activity of Essential Oil of Eugenia caryophylata from Amboina Island and Derivatives of Eugenol
  37. Effects of Blue and Red Light On Growth And Nitrate Metabolism In Pakchoi
  38. miRNA-199a-5p functions as a tumor suppressor in prolactinomas
  39. Solar photodegradation of carbamazepine from aqueous solutions using a compound parabolic concentrator equipped with a sun tracking system
  40. Influence of sub-inhibitory concentration of selected plant essential oils on the physical and biochemical properties of Pseudomonas orientalis
  41. Preparation and spectroscopic studies of Fe(II), Ru(II), Pd(II) and Zn(II) complexes of Schiff base containing terephthalaldehyde and their transfer hydrogenation and Suzuki-Miyaura coupling reaction
  42. Complex formation in a liquid-liquid extraction-chromogenic system for vanadium(IV)
  43. Synthesis, characterization (IR, 1H, 13C & 31P NMR), fungicidal, herbicidal and molecular docking evaluation of steroid phosphorus compounds
  44. Analysis and Biological Evaluation of Arisaema Amuremse Maxim Essential Oil
  45. A preliminary assessment of potential ecological risk and soil contamination by heavy metals around a cement factory, western Saudi Arabia
  46. Anti- inflammatory effect of Prunus tomentosa Thunb total flavones in LPS-induced RAW264.7 cells
  47. Collaborative Influence of Elevated CO2 Concentration and High Temperature on Potato Biomass Accumulation and Characteristics
  48. Methods of extraction, physicochemical properties of alginates and their applications in biomedical field – a review
  49. Characteristics of liposomes derived from egg yolk
  50. Preparation of ternary ZnO/Ag/cellulose and its enhanced photocatalytic degradation property on phenol and benzene in VOCs
  51. Influence of Human Serum Albumin Glycation on the Binding Affinities for Natural Flavonoids
  52. Synthesis and antioxidant activity of 2-methylthio-pyrido[3,2-e][1,2,4] triazolo[1,5-a]pyrimidines
  53. Comparative study on the antioxidant activities of ten common flower teas from China
  54. Molecular Properties of Symmetrical Networks Using Topological Polynomials
  55. Synthesis of Co3O4 Nano Aggregates by Co-precipitation Method and its Catalytic and Fuel Additive Applications
  56. Phytochemical analysis, Antioxidant and Antiprotoscolices potential of ethanol extracts of selected plants species against Echinococcus granulosus: In-vitro study
  57. Silver nanoparticles enhanced fluorescence for sensitive determination of fluoroquinolones in water solutions
  58. Simultaneous Quantification of the New Psychoactive Substances 3-FMC, 3-FPM, 4-CEC, and 4-BMC in Human Blood using GC-MS
  59. Biodiesel Production by Lipids From Indonesian strain of Microalgae Chlorella vulgaris
  60. Miscibility studies of polystyrene/polyvinyl chloride blend in presence of organoclay
  61. Antibacterial Activities of Transition Metal complexes of Mesocyclic Amidine 1,4-diazacycloheptane (DACH)
  62. Novel 1,8-Naphthyridine Derivatives: Design, Synthesis and in vitro screening of their cytotoxic activity against MCF7 cell line
  63. Investigation of Stress Corrosion Cracking Behaviour of Mg-Al-Zn Alloys in Different pH Environments by SSRT Method
  64. Various Combinations of Flame Retardants for Poly (vinyl chloride)
  65. Phenolic compounds and biological activities of rye (Secale cereale L.) grains
  66. Oxidative degradation of gentamicin present in water by an electro-Fenton process and biodegradability improvement
  67. Optimizing Suitable Conditions for the Removal of Ammonium Nitrogen by a Microbe Isolated from Chicken Manure
  68. Anti-inflammatory, antipyretic, analgesic, and antioxidant activities of Haloxylon salicornicum aqueous fraction
  69. The anti-corrosion behaviour of Satureja montana L. extract on iron in NaCl solution
  70. Interleukin-4, hemopexin, and lipoprotein-associated phospholipase A2 are significantly increased in patients with unstable carotid plaque
  71. A comparative study of the crystal structures of 2-(4-(2-(4-(3-chlorophenyl)pipera -zinyl)ethyl) benzyl)isoindoline-1,3-dione by synchrotron radiation X-ray powder diffraction and single-crystal X-ray diffraction
  72. Conceptual DFT as a Novel Chemoinformatics Tool for Studying the Chemical Reactivity Properties of the Amatoxin Family of Fungal Peptides
  73. Occurrence of Aflatoxin M1 in Milk-based Mithae samples from Pakistan
  74. Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination
  75. Increasing the activity of DNAzyme based on the telomeric sequence: 2’-OMe-RNA and LNA modifications
  76. Exploring the optoelectronic properties of a chromene-appended pyrimidone derivative for photovoltaic applications
  77. Effect of He Qi San on DNA Methylation in Type 2 Diabetes Mellitus Patients with Phlegm-blood Stasis Syndrome
  78. Cyclodextrin potentiometric sensors based on selective recognition sites for procainamide: Comparative and theoretical study
  79. Greener synthesis of dimethyl carbonate from carbon dioxide and methanol using a tunable ionic liquid catalyst
  80. Nonisothermal Cold Crystallization Kinetics of Poly(lactic acid)/Bacterial Poly(hydroxyoctanoate) (PHO)/Talc
  81. Enhanced adsorption of sulfonamide antibiotics in water by modified biochar derived from bagasse
  82. Study on the Mechanism of Shugan Xiaozhi Fang on Cells with Non-alcoholic Fatty Liver Disease
  83. Comparative Effects of Salt and Alkali Stress on Antioxidant System in Cotton (Gossypium Hirsutum L.) Leaves
  84. Optimization of chromatographic systems for analysis of selected psychotropic drugs and their metabolites in serum and saliva by HPLC in order to monitor therapeutic drugs
  85. Electrocatalytic Properties of Ni-Doped BaFe12O19 for Oxygen Evolution in Alkaline Solution
  86. Study on the removal of high contents of ammonium from piggery wastewater by clinoptilolite and the corresponding mechanisms
  87. Phytochemistry and toxicological assessment of Bryonia dioica roots used in north-African alternative medicine
  88. The essential oil composition of selected Hemerocallis cultivars and their biological activity
  89. Mechanical Properties of Carbon Fiber Reinforced Nanocrystalline Nickel Composite Electroforming Deposit
  90. Anti-c-myc efficacy block EGFL7 induced prolactinoma tumorigenesis
  91. Topical Issue on Applications of Mathematics in Chemistry
  92. Zagreb Connection Number Index of Nanotubes and Regular Hexagonal Lattice
  93. The Sanskruti index of trees and unicyclic graphs
  94. Valency-based molecular descriptors of Bakelite network BNmn
  95. Computing Topological Indices for Para-Line Graphs of Anthracene
  96. Zagreb Polynomials and redefined Zagreb indices of Dendrimers and Polyomino Chains
  97. Topological Descriptor of 2-Dimensional Silicon Carbons and Their Applications
  98. Topological invariants for the line graphs of some classes of graphs
  99. Words for maximal Subgroups of Fi24‘
  100. Generators of Maximal Subgroups of Harada-Norton and some Linear Groups
  101. Special Issue on POKOCHA 2018
  102. Influence of Production Parameters on the Content of Polyphenolic Compounds in Extruded Porridge Enriched with Chokeberry Fruit (Aronia melanocarpa (Michx.) Elliott)
  103. Effects of Supercritical Carbon Dioxide Extraction (SC-CO2) on the content of tiliroside in the extracts from Tilia L. flowers
  104. Impact of xanthan gum addition on phenolic acids composition and selected properties of new gluten-free maize-field bean pasta
  105. Impact of storage temperature and time on Moldavian dragonhead oil – spectroscopic and chemometric analysis
  106. The effect of selected substances on the stability of standard solutions in voltammetric analysis of ascorbic acid in fruit juices
  107. Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland
  108. Special Issue on IC3PE 2018 Conference
  109. The Photocatalytic Activity of Zns-TiO2 on a Carbon Fiber Prepared by Chemical Bath Deposition
  110. N-octyl chitosan derivatives as amphiphilic carrier agents for herbicide formulations
  111. Kinetics and Mechanistic Study of Hydrolysis of Adenosine Monophosphate Disodium Salt (AMPNa2) in Acidic and Alkaline Media
  112. Antimalarial Activity of Andrographis Paniculata Ness‘s N-hexane Extract and Its Major Compounds
  113. Special Issue on ABB2018 Conference
  114. Special Issue on ICCESEN 2017
  115. Theoretical Diagnostics of Second and Third-order Hyperpolarizabilities of Several Acid Derivatives
  116. Determination of Gamma Rays Efficiency Against Rhizoctonia solani in Potatoes
  117. Studies On Compatibilization Of Recycled Polyethylene/Thermoplastic Starch Blends By Using Different Compatibilizer
  118. Liquid−Liquid Extraction of Linalool from Methyl Eugenol with 1-Ethyl-3-methylimidazolium Hydrogen Sulfate [EMIM][HSO4] Ionic Liquid
  119. Synthesis of Graphene Oxide Through Ultrasonic Assisted Electrochemical Exfoliation
  120. Special Issue on ISCMP 2018
  121. Synthesis and antiproliferative evaluation of some 1,4-naphthoquinone derivatives against human cervical cancer cells
  122. The influence of the grafted aryl groups on the solvation properties of the graphyne and graphdiyne - a MD study
  123. Electrochemical modification of platinum and glassy carbon surfaces with pyridine layers and their use as complexing agents for copper (II) ions
  124. Effect of Electrospinning Process on Total Antioxidant Activity of Electrospun Nanofibers Containing Grape Seed Extract
  125. Effect Of Thermal Treatment Of Trepel At Temperature Range 800-1200˚C
  126. Topical Issue on Agriculture
  127. The effect of Cladophora glomerata exudates on the amino acid composition of Cladophora fracta and Rhizoclonium sp.
  128. Influence of the Static Magnetic Field and Algal Extract on the Germination of Soybean Seeds
  129. The use of UV-induced fluorescence for the assessment of homogeneity of granular mixtures
  130. The use of microorganisms as bio-fertilizers in the cultivation of white lupine
  131. Lyophilized apples on flax oil and ethyl esters of flax oil - stability and antioxidant evaluation
  132. Production of phosphorus biofertilizer based on the renewable materials in large laboratory scale
  133. Human health risk assessment of potential toxic elements in paddy soil and rice (Oryza sativa) from Ugbawka fields, Enugu, Nigeria
  134. Recovery of phosphates(V) from wastewaters of different chemical composition
  135. Special Issue on the 4th Green Chemistry 2018
  136. Dead zone for hydrogenation of propylene reaction carried out on commercial catalyst pellets
  137. Improved thermally stable oligoetherols from 6-aminouracil, ethylene carbonate and boric acid
  138. The role of a chemical loop in removal of hazardous contaminants from coke oven wastewater during its treatment
  139. Combating paraben pollution in surface waters with a variety of photocatalyzed systems: Looking for the most efficient technology
  140. Special Issue on Chemistry Today for Tomorrow 2019
  141. Applying Discriminant and Cluster Analyses to Separate Allergenic from Non-allergenic Proteins
  142. Chemometric Expertise Of Clinical Monitoring Data Of Prolactinoma Patients
  143. Chemomertic Risk Assessment of Soil Pollution
  144. New composite sorbent for speciation analysis of soluble chromium in textiles
  145. Photocatalytic activity of NiFe2O4 and Zn0.5Ni0.5Fe2O4 modified by Eu(III) and Tb(III) for decomposition of Malachite Green
  146. Photophysical and antibacterial activity of light-activated quaternary eosin Y
  147. Spectral properties and biological activity of La(III) and Nd(III) Monensinates
  148. Special Issue on Monitoring, Risk Assessment and Sustainable Management for the Exposure to Environmental Toxins
  149. Soil organic carbon mineralization in relation to microbial dynamics in subtropical red soils dominated by differently sized aggregates
  150. A potential reusable fluorescent aptasensor based on magnetic nanoparticles for ochratoxin A analysis
  151. Special Issue on 13th JCC 2018
  152. Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+
  153. Thermal and Morphology Properties of Cellulose Nanofiber from TEMPO-oxidized Lower part of Empty Fruit Bunches (LEFB)
  154. Encapsulation of Vitamin C in Sesame Liposomes: Computational and Experimental Studies
  155. A comparative study of the utilization of synthetic foaming agent and aluminum powder as pore-forming agents in lightweight geopolymer synthesis
  156. Synthesis of high surface area mesoporous silica SBA-15 by adjusting hydrothermal treatment time and the amount of polyvinyl alcohol
  157. Review of large-pore mesostructured cellular foam (MCF) silica and its applications
  158. Ion Exchange of Benzoate in Ni-Al-Benzoate Layered Double Hydroxide by Amoxicillin
  159. Synthesis And Characterization Of CoMo/Mordenite Catalyst For Hydrotreatment Of Lignin Compound Models
  160. Production of Biodiesel from Nyamplung (Calophyllum inophyllum L.) using Microwave with CaO Catalyst from Eggshell Waste: Optimization of Transesterification Process Parameters
  161. The Study of the Optical Properties of C60 Fullerene in Different Organic Solvents
  162. Composite Material Consisting of HKUST-1 and Indonesian Activated Natural Zeolite and its Application in CO2 Capture
  163. Topical Issue on Environmental Chemistry
  164. Ionic liquids modified cobalt/ZSM-5 as a highly efficient catalyst for enhancing the selectivity towards KA oil in the aerobic oxidation of cyclohexane
  165. Application of Thermal Resistant Gemini Surfactants in Highly Thixotropic Water-in-oil Drilling Fluid System
  166. Screening Study on Rheological Behavior and Phase Transition Point of Polymer-containing Fluids produced under the Oil Freezing Point Temperature
  167. The Chemical Softening Effect and Mechanism of Low Rank Coal Soaked in Alkaline Solution
  168. The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst
  169. Special Issue on the International conference CosCI 2018
  170. Design of SiO2/TiO2 that Synergistically Increases The Hydrophobicity of Methyltrimethoxysilane Coated Glass
  171. Antidiabetes and Antioxidant agents from Clausena excavata root as medicinal plant of Myanmar
  172. Development of a Gold Immunochromatographic Assay Method Using Candida Biofilm Antigen as a Bioreceptor for Candidiasis in Rats
  173. Special Issue on Applied Biochemistry and Biotechnology 2019
  174. Adsorption of copper ions on Magnolia officinalis residues after solid-phase fermentation with Phanerochaete chrysosporium
  175. Erratum
  176. Erratum to: Sand Dune Characterization For Preparing Metallurgical Grade Silicon
https://doi.org/10.1515/chem-2019-0159
Keywords for this article
nanocrystalline; carbon fiber; tensile strength; microhardness; medium temperature; nickel
Creative Commons
BY 4.0

Articles in the same Issue

  1. Regular Articles
  2. Research on correlation of compositions with oestrogenic activity of Cistanche based on LC/Q-TOF-MS/MS technology
  3. Efficacy of Pyrus elaeagnifolia subsp. elaeagnifolia in acetic acid–induced colitis model
  4. Anti-inflammatory and antinociceptive features of Bryonia alba L.: As a possible alternative in treating rheumatism
  5. High efficiency liposome fusion induced by reducing undesired membrane peptides interaction
  6. Prediction of the Blood-Brain Barrier Permeability Using RP-18 Thin Layer Chromatography
  7. Phytic Acid Extracted from Rice Bran as a Growth Promoter for Euglena gracilis
  8. Development of a validated spectrofluorimetric method for assay of sotalol hydrochloride in tablets and human plasma: application for stability-indicating studies
  9. Topological Indices of Hyaluronic Acid-Paclitaxel Conjugates’ Molecular Structure in Cancer Treatment
  10. Thermodynamic properties of the bubble growth process in a pool boiling of water-ethanol mixture two-component system
  11. Critical Roles of the PI3K-Akt-mTOR Signaling Pathway in Apoptosis and Autophagy of Astrocytes Induced by Methamphetamine
  12. Characteristics of Stable Hydrogen and Oxygen Isotopes of Soil Moisture under Different Land Use in Dry Hot Valley of Yuanmou
  13. Specific, highly sensitive and simple spectrofluorimetric method for quantification of daclatasvir in HCV human plasma patients and in tablets dosage form
  14. Chromium-modified cobalt molybdenum nitrides as catalysts for ammonia synthesis
  15. Langerhans cell-like dendritic cells treated with ginsenoside Rh2 regulate the differentiation of Th1 and Th2 cells in vivo
  16. Identification of Powdery Mildew Blumeria graminis f. sp. tritici Resistance Genes in Selected Wheat Varieties and Development of Multiplex PCR
  17. Computational Analysis of new Degree-based descriptors of oxide networks
  18. The Use Of Chemical Composition And Additives To Classify Petrol And Diesel Using Gas Chromatography–Mass Spectrometry And Chemometric Analysis: A Uk Study
  19. Minimal Energy Tree with 4 Branched Vertices
  20. Jatropha seed oil derived poly(esteramide-urethane)/ fumed silica nanocomposite coatings for corrosion protection
  21. Calculating topological indices of certain OTIS interconnection networks
  22. Energy storage analysis of R125 in UIO-66 and MOF-5 nanoparticles: A molecular simulation study
  23. Velvet Antler compounds targeting major cell signaling pathways in osteosarcoma - a new insight into mediating the process of invasion and metastasis in OS
  24. Effects of Azadirachta Indica Leaf Extract, Capping Agents, on the Synthesis of Pure And Cu Doped ZnO-Nanoparticles: A Green Approach and Microbial Activity
  25. Aqueous Micro-hydration of Na+(H2O)n=1-7 Clusters: DFT Study
  26. A proposed image-based detection of methamidophos pesticide using peroxyoxalate chemiluminescence system
  27. Phytochemical screening and estrogenic activity of total glycosides of Cistanche deserticola
  28. Biological evaluation of a series of benzothiazole derivatives as mosquitocidal agents
  29. Chemical pretreatments of Trapa bispinosa's peel (TBP) biosorbent to enhance adsorption capacity for Pb(ll)
  30. Dynamic Changes in MMP1 and TIMP1 in the Antifibrotic Process of Dahuang Zhechong Pill in Rats with Liver Fibrosis
  31. The Optimization and Production of Ginkgolide B Lipid Microemulsion
  32. Photodynamic Therapy Enhanced the Antitumor Effects of Berberine on HeLa Cells
  33. Chiral and Achiral Enantiomeric Separation of (±)-Alprenolol
  34. Correlation of Water Fluoride with Body Fluids, Dental Fluorosis and FT4, FT3 –TSH Disruption among Children in an Endemic Fluorosis area in Pakistan
  35. A one-step incubation ELISA kit for rapid determination of dibutyl phthalate in water, beverage and liquor
  36. Free Radical Scavenging Activity of Essential Oil of Eugenia caryophylata from Amboina Island and Derivatives of Eugenol
  37. Effects of Blue and Red Light On Growth And Nitrate Metabolism In Pakchoi
  38. miRNA-199a-5p functions as a tumor suppressor in prolactinomas
  39. Solar photodegradation of carbamazepine from aqueous solutions using a compound parabolic concentrator equipped with a sun tracking system
  40. Influence of sub-inhibitory concentration of selected plant essential oils on the physical and biochemical properties of Pseudomonas orientalis
  41. Preparation and spectroscopic studies of Fe(II), Ru(II), Pd(II) and Zn(II) complexes of Schiff base containing terephthalaldehyde and their transfer hydrogenation and Suzuki-Miyaura coupling reaction
  42. Complex formation in a liquid-liquid extraction-chromogenic system for vanadium(IV)
  43. Synthesis, characterization (IR, 1H, 13C & 31P NMR), fungicidal, herbicidal and molecular docking evaluation of steroid phosphorus compounds
  44. Analysis and Biological Evaluation of Arisaema Amuremse Maxim Essential Oil
  45. A preliminary assessment of potential ecological risk and soil contamination by heavy metals around a cement factory, western Saudi Arabia
  46. Anti- inflammatory effect of Prunus tomentosa Thunb total flavones in LPS-induced RAW264.7 cells
  47. Collaborative Influence of Elevated CO2 Concentration and High Temperature on Potato Biomass Accumulation and Characteristics
  48. Methods of extraction, physicochemical properties of alginates and their applications in biomedical field – a review
  49. Characteristics of liposomes derived from egg yolk
  50. Preparation of ternary ZnO/Ag/cellulose and its enhanced photocatalytic degradation property on phenol and benzene in VOCs
  51. Influence of Human Serum Albumin Glycation on the Binding Affinities for Natural Flavonoids
  52. Synthesis and antioxidant activity of 2-methylthio-pyrido[3,2-e][1,2,4] triazolo[1,5-a]pyrimidines
  53. Comparative study on the antioxidant activities of ten common flower teas from China
  54. Molecular Properties of Symmetrical Networks Using Topological Polynomials
  55. Synthesis of Co3O4 Nano Aggregates by Co-precipitation Method and its Catalytic and Fuel Additive Applications
  56. Phytochemical analysis, Antioxidant and Antiprotoscolices potential of ethanol extracts of selected plants species against Echinococcus granulosus: In-vitro study
  57. Silver nanoparticles enhanced fluorescence for sensitive determination of fluoroquinolones in water solutions
  58. Simultaneous Quantification of the New Psychoactive Substances 3-FMC, 3-FPM, 4-CEC, and 4-BMC in Human Blood using GC-MS
  59. Biodiesel Production by Lipids From Indonesian strain of Microalgae Chlorella vulgaris
  60. Miscibility studies of polystyrene/polyvinyl chloride blend in presence of organoclay
  61. Antibacterial Activities of Transition Metal complexes of Mesocyclic Amidine 1,4-diazacycloheptane (DACH)
  62. Novel 1,8-Naphthyridine Derivatives: Design, Synthesis and in vitro screening of their cytotoxic activity against MCF7 cell line
  63. Investigation of Stress Corrosion Cracking Behaviour of Mg-Al-Zn Alloys in Different pH Environments by SSRT Method
  64. Various Combinations of Flame Retardants for Poly (vinyl chloride)
  65. Phenolic compounds and biological activities of rye (Secale cereale L.) grains
  66. Oxidative degradation of gentamicin present in water by an electro-Fenton process and biodegradability improvement
  67. Optimizing Suitable Conditions for the Removal of Ammonium Nitrogen by a Microbe Isolated from Chicken Manure
  68. Anti-inflammatory, antipyretic, analgesic, and antioxidant activities of Haloxylon salicornicum aqueous fraction
  69. The anti-corrosion behaviour of Satureja montana L. extract on iron in NaCl solution
  70. Interleukin-4, hemopexin, and lipoprotein-associated phospholipase A2 are significantly increased in patients with unstable carotid plaque
  71. A comparative study of the crystal structures of 2-(4-(2-(4-(3-chlorophenyl)pipera -zinyl)ethyl) benzyl)isoindoline-1,3-dione by synchrotron radiation X-ray powder diffraction and single-crystal X-ray diffraction
  72. Conceptual DFT as a Novel Chemoinformatics Tool for Studying the Chemical Reactivity Properties of the Amatoxin Family of Fungal Peptides
  73. Occurrence of Aflatoxin M1 in Milk-based Mithae samples from Pakistan
  74. Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination
  75. Increasing the activity of DNAzyme based on the telomeric sequence: 2’-OMe-RNA and LNA modifications
  76. Exploring the optoelectronic properties of a chromene-appended pyrimidone derivative for photovoltaic applications
  77. Effect of He Qi San on DNA Methylation in Type 2 Diabetes Mellitus Patients with Phlegm-blood Stasis Syndrome
  78. Cyclodextrin potentiometric sensors based on selective recognition sites for procainamide: Comparative and theoretical study
  79. Greener synthesis of dimethyl carbonate from carbon dioxide and methanol using a tunable ionic liquid catalyst
  80. Nonisothermal Cold Crystallization Kinetics of Poly(lactic acid)/Bacterial Poly(hydroxyoctanoate) (PHO)/Talc
  81. Enhanced adsorption of sulfonamide antibiotics in water by modified biochar derived from bagasse
  82. Study on the Mechanism of Shugan Xiaozhi Fang on Cells with Non-alcoholic Fatty Liver Disease
  83. Comparative Effects of Salt and Alkali Stress on Antioxidant System in Cotton (Gossypium Hirsutum L.) Leaves
  84. Optimization of chromatographic systems for analysis of selected psychotropic drugs and their metabolites in serum and saliva by HPLC in order to monitor therapeutic drugs
  85. Electrocatalytic Properties of Ni-Doped BaFe12O19 for Oxygen Evolution in Alkaline Solution
  86. Study on the removal of high contents of ammonium from piggery wastewater by clinoptilolite and the corresponding mechanisms
  87. Phytochemistry and toxicological assessment of Bryonia dioica roots used in north-African alternative medicine
  88. The essential oil composition of selected Hemerocallis cultivars and their biological activity
  89. Mechanical Properties of Carbon Fiber Reinforced Nanocrystalline Nickel Composite Electroforming Deposit
  90. Anti-c-myc efficacy block EGFL7 induced prolactinoma tumorigenesis
  91. Topical Issue on Applications of Mathematics in Chemistry
  92. Zagreb Connection Number Index of Nanotubes and Regular Hexagonal Lattice
  93. The Sanskruti index of trees and unicyclic graphs
  94. Valency-based molecular descriptors of Bakelite network BNmn
  95. Computing Topological Indices for Para-Line Graphs of Anthracene
  96. Zagreb Polynomials and redefined Zagreb indices of Dendrimers and Polyomino Chains
  97. Topological Descriptor of 2-Dimensional Silicon Carbons and Their Applications
  98. Topological invariants for the line graphs of some classes of graphs
  99. Words for maximal Subgroups of Fi24‘
  100. Generators of Maximal Subgroups of Harada-Norton and some Linear Groups
  101. Special Issue on POKOCHA 2018
  102. Influence of Production Parameters on the Content of Polyphenolic Compounds in Extruded Porridge Enriched with Chokeberry Fruit (Aronia melanocarpa (Michx.) Elliott)
  103. Effects of Supercritical Carbon Dioxide Extraction (SC-CO2) on the content of tiliroside in the extracts from Tilia L. flowers
  104. Impact of xanthan gum addition on phenolic acids composition and selected properties of new gluten-free maize-field bean pasta
  105. Impact of storage temperature and time on Moldavian dragonhead oil – spectroscopic and chemometric analysis
  106. The effect of selected substances on the stability of standard solutions in voltammetric analysis of ascorbic acid in fruit juices
  107. Determination of the content of Pb, Cd, Cu, Zn in dairy products from various regions of Poland
  108. Special Issue on IC3PE 2018 Conference
  109. The Photocatalytic Activity of Zns-TiO2 on a Carbon Fiber Prepared by Chemical Bath Deposition
  110. N-octyl chitosan derivatives as amphiphilic carrier agents for herbicide formulations
  111. Kinetics and Mechanistic Study of Hydrolysis of Adenosine Monophosphate Disodium Salt (AMPNa2) in Acidic and Alkaline Media
  112. Antimalarial Activity of Andrographis Paniculata Ness‘s N-hexane Extract and Its Major Compounds
  113. Special Issue on ABB2018 Conference
  114. Special Issue on ICCESEN 2017
  115. Theoretical Diagnostics of Second and Third-order Hyperpolarizabilities of Several Acid Derivatives
  116. Determination of Gamma Rays Efficiency Against Rhizoctonia solani in Potatoes
  117. Studies On Compatibilization Of Recycled Polyethylene/Thermoplastic Starch Blends By Using Different Compatibilizer
  118. Liquid−Liquid Extraction of Linalool from Methyl Eugenol with 1-Ethyl-3-methylimidazolium Hydrogen Sulfate [EMIM][HSO4] Ionic Liquid
  119. Synthesis of Graphene Oxide Through Ultrasonic Assisted Electrochemical Exfoliation
  120. Special Issue on ISCMP 2018
  121. Synthesis and antiproliferative evaluation of some 1,4-naphthoquinone derivatives against human cervical cancer cells
  122. The influence of the grafted aryl groups on the solvation properties of the graphyne and graphdiyne - a MD study
  123. Electrochemical modification of platinum and glassy carbon surfaces with pyridine layers and their use as complexing agents for copper (II) ions
  124. Effect of Electrospinning Process on Total Antioxidant Activity of Electrospun Nanofibers Containing Grape Seed Extract
  125. Effect Of Thermal Treatment Of Trepel At Temperature Range 800-1200˚C
  126. Topical Issue on Agriculture
  127. The effect of Cladophora glomerata exudates on the amino acid composition of Cladophora fracta and Rhizoclonium sp.
  128. Influence of the Static Magnetic Field and Algal Extract on the Germination of Soybean Seeds
  129. The use of UV-induced fluorescence for the assessment of homogeneity of granular mixtures
  130. The use of microorganisms as bio-fertilizers in the cultivation of white lupine
  131. Lyophilized apples on flax oil and ethyl esters of flax oil - stability and antioxidant evaluation
  132. Production of phosphorus biofertilizer based on the renewable materials in large laboratory scale
  133. Human health risk assessment of potential toxic elements in paddy soil and rice (Oryza sativa) from Ugbawka fields, Enugu, Nigeria
  134. Recovery of phosphates(V) from wastewaters of different chemical composition
  135. Special Issue on the 4th Green Chemistry 2018
  136. Dead zone for hydrogenation of propylene reaction carried out on commercial catalyst pellets
  137. Improved thermally stable oligoetherols from 6-aminouracil, ethylene carbonate and boric acid
  138. The role of a chemical loop in removal of hazardous contaminants from coke oven wastewater during its treatment
  139. Combating paraben pollution in surface waters with a variety of photocatalyzed systems: Looking for the most efficient technology
  140. Special Issue on Chemistry Today for Tomorrow 2019
  141. Applying Discriminant and Cluster Analyses to Separate Allergenic from Non-allergenic Proteins
  142. Chemometric Expertise Of Clinical Monitoring Data Of Prolactinoma Patients
  143. Chemomertic Risk Assessment of Soil Pollution
  144. New composite sorbent for speciation analysis of soluble chromium in textiles
  145. Photocatalytic activity of NiFe2O4 and Zn0.5Ni0.5Fe2O4 modified by Eu(III) and Tb(III) for decomposition of Malachite Green
  146. Photophysical and antibacterial activity of light-activated quaternary eosin Y
  147. Spectral properties and biological activity of La(III) and Nd(III) Monensinates
  148. Special Issue on Monitoring, Risk Assessment and Sustainable Management for the Exposure to Environmental Toxins
  149. Soil organic carbon mineralization in relation to microbial dynamics in subtropical red soils dominated by differently sized aggregates
  150. A potential reusable fluorescent aptasensor based on magnetic nanoparticles for ochratoxin A analysis
  151. Special Issue on 13th JCC 2018
  152. Fluorescence study of 5-nitroisatin Schiff base immobilized on SBA-15 for sensing Fe3+
  153. Thermal and Morphology Properties of Cellulose Nanofiber from TEMPO-oxidized Lower part of Empty Fruit Bunches (LEFB)
  154. Encapsulation of Vitamin C in Sesame Liposomes: Computational and Experimental Studies
  155. A comparative study of the utilization of synthetic foaming agent and aluminum powder as pore-forming agents in lightweight geopolymer synthesis
  156. Synthesis of high surface area mesoporous silica SBA-15 by adjusting hydrothermal treatment time and the amount of polyvinyl alcohol
  157. Review of large-pore mesostructured cellular foam (MCF) silica and its applications
  158. Ion Exchange of Benzoate in Ni-Al-Benzoate Layered Double Hydroxide by Amoxicillin
  159. Synthesis And Characterization Of CoMo/Mordenite Catalyst For Hydrotreatment Of Lignin Compound Models
  160. Production of Biodiesel from Nyamplung (Calophyllum inophyllum L.) using Microwave with CaO Catalyst from Eggshell Waste: Optimization of Transesterification Process Parameters
  161. The Study of the Optical Properties of C60 Fullerene in Different Organic Solvents
  162. Composite Material Consisting of HKUST-1 and Indonesian Activated Natural Zeolite and its Application in CO2 Capture
  163. Topical Issue on Environmental Chemistry
  164. Ionic liquids modified cobalt/ZSM-5 as a highly efficient catalyst for enhancing the selectivity towards KA oil in the aerobic oxidation of cyclohexane
  165. Application of Thermal Resistant Gemini Surfactants in Highly Thixotropic Water-in-oil Drilling Fluid System
  166. Screening Study on Rheological Behavior and Phase Transition Point of Polymer-containing Fluids produced under the Oil Freezing Point Temperature
  167. The Chemical Softening Effect and Mechanism of Low Rank Coal Soaked in Alkaline Solution
  168. The Influence Of NO/O2 On The NOx Storage Properties Over A Pt-Ba-Ce/γ-Al2O3 Catalyst
  169. Special Issue on the International conference CosCI 2018
  170. Design of SiO2/TiO2 that Synergistically Increases The Hydrophobicity of Methyltrimethoxysilane Coated Glass
  171. Antidiabetes and Antioxidant agents from Clausena excavata root as medicinal plant of Myanmar
  172. Development of a Gold Immunochromatographic Assay Method Using Candida Biofilm Antigen as a Bioreceptor for Candidiasis in Rats
  173. Special Issue on Applied Biochemistry and Biotechnology 2019
  174. Adsorption of copper ions on Magnolia officinalis residues after solid-phase fermentation with Phanerochaete chrysosporium
  175. Erratum
  176. Erratum to: Sand Dune Characterization For Preparing Metallurgical Grade Silicon
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 8.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/chem-2019-0159/html
Scroll to top button