Home A scientometric review of the literature on the incorporation of steel fibers in ultra-high-performance concrete with research mapping knowledge
Article Open Access

A scientometric review of the literature on the incorporation of steel fibers in ultra-high-performance concrete with research mapping knowledge

  • Wei Zheng , Muhammad Nasir Amin EMAIL logo , Kaffayatullah Khan , Muhammad Sufian EMAIL logo and Ahmed Farouk Deifalla
Published/Copyright: July 3, 2023
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
REVIEWS ON ADVANCED MATERIALS SCIENCE
From the journal REVIEWS ON ADVANCED MATERIALS SCIENCE Volume 62 Issue 1

Abstract

In the construction industry, the incorporation of steel fibers in ultra-high-performance concrete (UHPC) is vital for improving its mechanical characteristics. In order to identify the essential factors of UHPC, the literature on the effect of steel fibers on UHPC is reviewed using scientometric methods in this work. The review contains complex processes like knowledge mapping, co-occurrence, and co-citation. In order to analyze the bibliographic data on the impact of steel fibers on UHPC, this study makes use of contemporary methodologies for data processing, mining, analysis, presentation, and visualization. The aim is to provide direction for further research in this area by summarizing the literature. In order to achieve this goal, data from the Scopus database, including publication sources, top authors, keywords, significant publications, and nations contributing the most to the subject, are retrieved and examined. According to the scientometric analysis, the most frequently used keyword is “steel fibers,” “Construction and Building Materials” is the most popular publication source in terms of citations and articles, and China is the top-ranking nation in the industry. Academic scholars can gain from this study’s graphical and quantitative portrayal of the contributing researchers and nations by making it easier to share concepts and form collaborative initiatives. This study also shows that steel fibers can improve the mechanical properties of UHPC but their widespread manufacturing and use are dependent on factors including the fiber content and geometry.

Keywords: steel fibers; ultra-high-performance concrete; mechanical properties; fiber; scientometric analysis

1 Introduction

One of the most basic and commonly used building materials worldwide is concrete [1,2,3]. However, because of concrete’s inherent characteristics, it has some drawbacks, including poorer resistance against tensile stresses, brittle nature, decreased strain capacity, and less effective resistance to the development and progression of cracks [4,5,6]. To address these problems, the incorporation of synthetic fibers [7,8,9], metallic/steel fibers [10,11], natural fibers [12,13,14,15], mineral fibers [16,17,18,19], etc., in concrete is usually made [20,21,22] to improve its toughness [23,24]. Figure 1 depicts the broader classification of all the fibers [25]. Ultra-high performance concrete (UHPC) is a solution to the growing demand for strong, long-lasting concrete, which was developed in the 1990s, has remarkable mechanical qualities and an extremely dense microstructure [26].

Figure 1 Broader classification of fibers [25].
Figure 1

Broader classification of fibers [25].

Higher cement content, superplasticizers (SPs), fibers, silica fume, and other supplementary cementitious materials are all included in the more advanced type of fiber-reinforced concrete known as UHPC. UHPC’s design aims to pack solid materials densely by keeping the water content (w/c) below 0.2 [27]. Because of these characteristics, UHPC has a higher compressive strength of more than 150 MPa [28,29], almost 3–16 times as much as regular concrete [30,31], high ductility, and energy absorption capacity. The primary definitions state that compressive strength of 150 MPa is recommended for UHPC [28,32,33,34]. With such superior mechanical properties, UHPC structures are half to two-thirds lighter than conventional concrete without compromising the required load-bearing capacity [35]. Figure 2 depicts the reduced weight and dense particle density in UHPC [36].

Figure 2 Packing skeleton of conventional concrete and UHPC [36].
Figure 2

Packing skeleton of conventional concrete and UHPC [36].

Figure 3 depicts the fundamental specifications for UHPC [36]. According to Shi et al. [26], the primary factors involved in preparing UHPC are reducing porosity, enhancing microstructure, and improving the homogeneity of fresh pastes. With UHPC, the parameters are substantially related to the mix design and raw ingredients. Effects of the addition of additives like rice husk ash [37], silica fume [38], nanoparticles [39,40], limestone powder [41], fly ash [42], etc., further to raw materials in UHPC has been thoroughly examined in a number of research studies. Nowadays, researchers are more attentive toward sustainable supplementary cementitious materials [43,44,45,46] and recycled materials [47] for heading toward sustainable development.

Figure 3 UHPC basic requirements [36].
Figure 3

UHPC basic requirements [36].

The inclusion of fibers in UHPC is crucial for achieving improved mechanical properties [48]. Figure 4 depicts the schematic composition of fiber-reinforced UHPC [49]. The addition of steel fibers to UHPC significantly increased deflection at peak flexural loading and the corresponding strength [50]. Yu et al. [51] studied the flowability of UHPC by adding quartz and limestone as replacements and concluded that the flowability reduced as the amount of steel fibers increased.

Figure 4 Composition of fiber-reinforced UHPC (not to scale) [52].
Figure 4

Composition of fiber-reinforced UHPC (not to scale) [52].

The four distinct steel fiber forms that are often used in UHPC are depicted in Table 1. Wu et al. [53] reported that hooked-end and corrugated steel fibers resulted in reduced UHPC flowability than straight steel fibers due to more friction of aggregates with hooked-end steel fibers compared to other fiber shapes, more mechanical anchoring of deformed steel fibers in the matrix-fiber boding region, and easy bundling of deformed fibers compared to straight fibers [51,54]. The literature reports that adding an SP typically improves the workability of UHPC [26,55]. However, the direct addition of water and SP resulted in the absorption of cement particles by the SP, posing difficulty in achieving effective dispersion during mixing [26]. Hence, literature studies [28,36,46,57,58,59,60,61] suggest a step-by-step method for incorporating steel fibers to increase the dispersion of SP in UHPC. In addition, mixing time also affects how workable steel fiber-reinforced UHPC is. In general, more time and effort must be put into mixing to ensure that the fibers in UHPC are distributed uniformly. Instead, owing to the prolonged mixing time and the formation of air bubbles, the UHPC temperature is increased, which reduces the strength [32,56]. The UHPC mixing duration is typically adjusted between 10 and 20 min, according to the literature.

Table 1

Types and shapes of steel fibers [57,58,59,60,61,62]

Type of steel fiber Straight Twisted Corrugated Hooked end
Shape of the steel fiber
Length of the steel fiber (mm) 6 12 13 30 13 18 30 13 30 13 20 30
Diameter of the steel fiber (μm) 0.16 0.20 0.16/0.20 0.30 0.20 0.30 0.30/0.50 0.20 0.30 0.20 0.25/0.35 0.38

The objective of this systematic review is to investigate how steel fibers affect important UHPC features. This research focuses on a scientometric analysis of published data from the literature on UHPC reinforced with steel fibers up to 2022. The bibliography, funding, citations, keywords, abstract, and other data from 838 related articles are acquired using the Scopus search engine. VOSviewer tool is then employed to analyze the obtained data. The impact of steel fiber characteristics on the bonding mechanism between UHPC matrix and fibers is explained, including fiber orientation and distribution, pull-out resistance, and bonding zone microstructure. The effects of steel fiber shapes, length, and hybridization on UHPC’s mechanical properties, failure mode, durability, and autogenous shrinkage are elaborated.

2 Research significance

Since the study of steel fiber-reinforced UHPC, high-strength concrete has been a topic that is urgently needed, as lack of information restricts researchers’ ability to conduct new studies and form new partnerships. So, it is important to devise and execute a plan which aids scholars in gathering crucial knowledge from extremely reliable sources. Using a scientometric procedure, which includes using an appropriate software tool to statistically evaluate a vast volume of bibliographic data, is one way to get over this information gap. Scientometric analysis, in contrast to conventional review-based research, may precisely and thoroughly link various aspects of the literature. The authors with the most publications and citations, the co-occurrence of keywords, the major contributing nations, and the highly referenced articles in the research on steel fiber-reinforced UHPC may all be identified using scientometric analysis. This study can offer insightful information about the direction of future research on the subject and the existing state of the field. Young researchers can discuss concepts and techniques and form collaborations with one another with the aid of the statistical and graphical representations of academics and nations in the current work. By encouraging collaborations and knowledge sharing among researchers, the conducted scientometric analysis can help improve research on steel fiber-reinforced UHPC.

3 Methods

This study uses scientometric analysis of bibliographic data [62,63,64] to enumerate its numerous characteristics. The scientometric analysis utilizes scientific mapping, which researchers devise to study bibliometric data [63,64]. There are several articles on considered research areas; hence, the employment of an authentic search engine is essential. The two highly recommended databases, Web of Science and Scopus, are appropriate to achieve the study objective [65,66]. Subsequently, Scopus collects bibliographic data regarding research on UHPC having steel fibers. A search of UHPC with steel fibers on Scopus has given 838 results. Numerous screens are applied to filter out unnecessary data. Figure 5 depicts a comprehensive systematic flowchart of all the stages that were performed, including data retrieval, analysis, and the use of various filters during analysis.

Figure 5 Sequence of the research methods.
Figure 5

Sequence of the research methods.

Likewise, the literature has reported multiple studies on this method [67,68,69]. Using appropriate software, the CSV format stocks the Scopus database for its added assessment. The quantitative assessment and scientific visualization of gathered information are done using the VOSviewer mapping tool [70,71,72]. The succeeding CSV file is then updated on VOSviewer. The valuation of publication sources with frequently applied keywords, the authors with the most citations and articles, the highly cited articles, and the involvement of various countries are performed via scientometric analysis. The numerous features, their interconnectivity, and co-occurrences are established using maps, and the related quantifiable statistics are illustrated via tables. To recognize a specific element in the map, colors are allocated to the groups. Also, unique colors like a rainbow are employed to show density mapping, whereas plasma, rainbow, and Viridis are used for density visualization.

4 Analysis of results

4.1 Relevant subject areas and yearly publications

The evaluation to recognize the highly related research areas is performed using a Scopus analyzer. “Engineering” is the leading documents-generating discipline, with almost 51% of documents, followed by “Materials Science,” having 33% of documents (Figure 6). Overall, 89% of the total documents are contributed by these two disciplines. In order to assess the publishing patterns in the study fields under consideration, the Scopus database is also examined (Figure 7). Out of this evaluation, it is extracted that around 78% are journal articles, almost 16% are conference papers, and 3.5% are conference review articles. The annual trend of articles in steel fiber-reinforced UHPC from 2011 up to December 2022 is presented in Figure 8. There has been a gradual increase up to 2016 in the considered research area. However, a significant enhancement in the number of publications on steel fiber-reinforced UHPC is observed from 2016 to 2021. In 2022, the number of publications in the mentioned research area is more than 250 (December 2022). It is pretty motivating to observe that the steel fiber-reinforced UHPC is gaining the attention of researchers as high-strength concrete.

Figure 6 Subject area of articles.
Figure 6

Subject area of articles.

Figure 7 Different kinds of publications on the relevant academic topic.
Figure 7

Different kinds of publications on the relevant academic topic.

Figure 8 Annual publication trend of articles.
Figure 8

Annual publication trend of articles.

4.2 Sources of publications

The sources of publication are evaluated from bibliographic data by applying VOSviewer. At least. a limit of 10 articles is set for a single source and, in this way, 13 out of 838 article sources have met the specified criteria. Table 2 lists the number of publications and citations from sources containing at least ten articles in the respective domain. The “Construction and Building Materials” is a leading source of publications with 118 articles in the under-studied research area. Following that, the “Engineering Structures” and “Cement and Concrete Composites,” 46 and 44 articles, respectively, are the second and third leading publication sources. As far as the number of citations is concerned, the top three leading journals are “Engineering Structures,” “Cement and Concrete Research,” and “IOP Conference Series: Materials Science and Engineering” with 3,221, 1,713, and 950 citations, respectively, up to December 2022. This evaluation will provide a basis for the forthcoming scientometric analysis of steel-reinforced UHPC research. Moreover, the conventional review studies are insufficient to produce systematic graphs. Figure 9 represents the publication sources’ visualization with at least ten papers. The frame dimensions illustrate the source impact on this field of research with respect to document count, showing that the higher the effect, the larger the frame is, as it can be observed that “Construction and Building Materials” has a bigger frame as compared to others representing its higher impact in the steel fiber-reinforced UHPC research area. Three clusters are formed, and each cluster is assigned a different color on the map. The extent of publication source and frequency of co-citations is the basis for cluster formation [73]. The journal clustering is done using VOSviewer, based on their co-citation capacity in published documents. Like in the red cluster, seven journals have frequent co-citations in the same research. Additionally, the distance among clusters represents the linkage among sources of publication. “Construction and Building Materials” is more closely linked with “Materials” than with “IOP Conference Series: Materials Science and Engineering” or “Advanced Materials Research.”

Table 2

Sources of articles with at least ten publications in the same field of study

S/N Publication source Number of publications Total number of citations
1 Construction and Building Materials 118 908
2 Engineering Structures 46 3,221
3 Cement and Concrete Composites 44 26
4 IOP Conference Series: Materials Science and Engineering 28 950
5 Materials 28 112
6 Composite Structures 19 480
7 Journal of Building Engineering 19 72
8 Composites Part B: Engineering 18 234
9 Cement and Concrete Research 14 1,713
10 Journal of Materials in Civil Engineering 11 67
11 Structural Concrete 11 82
12 Advanced Materials Research 10 35
13 ACI Structural Journal 10 149
Figure 9 Scientific representation of the sources of publications with at least ten articles in the same field of study.
Figure 9

Scientific representation of the sources of publications with at least ten articles in the same field of study.

4.3 Keywords

Keywords are necessary in the research to identify the key idea of specific research [74]. Minimum keyword repetition requirements are set at 50. This results in a total of 19 keywords being shortlisted, as shown in Table 3. The three most often used keywords in the research on steel fiber-reinforced UHPC are compressive strength, UHPC, and steel fibers. Figure 10 displays a frequency occurrence map depending on density and links. The size of the frame for a certain keyword shows how frequently it appears, and the frame position shows how frequently it appears with other keywords in articles (Figure 10a). Also, as indicated in the graph, the frame size for leading keywords is noticeably bigger than it is for the other keywords, demonstrating the significance of these keywords for studying research on steel fiber-reinforced UHPC. Clustering is used to show the co-occurrence of terms across several publications. To illustrate the co-occurrence of the terms in published articles, each cluster is given a different color. Four unique groupings are represented by various color shades (Figure 10a). Similarly, many distinctive colors indicate concentrations of keyword density (Figure 10b). Each color is grouped in decreasing density order. The red color has the maximum density, whereas yellow, green, and blue have the lowest densities. UHPC and steel fibers are presented in yellow or red colors, presenting a reflection of their more frequent occurrences. Young scientists would find this conclusion useful in choosing keywords that will make searching for publications relevant to this particular research topic as easy as possible.

Table 3

Leading 19 frequently employed keywords in the steel fiber-reinforced UHPC research

S/N Keyword Occurrences
1 Steel fibers 645
2 UHPCs 302
3 Compressive strength 248
4 UHPCs 233
5 UHPCs 218
6 Reinforced concrete 204
7 UHPCs 179
8 Tensile strength 171
9 Concretes 108
10 Cracks 88
11 Steel fibers 83
12 Mechanical properties 78
13 Fibers 74
14 Bending strength 72
15 Ductility 59
16 Concrete beams and girders 54
17 Silica fume 53
18 Durability 52
19 Curing 51
Figure 10 Analysis of the keywords: (a) scientific visualization and (b) visualization of density.
Figure 10

Analysis of the keywords: (a) scientific visualization and (b) visualization of density.

4.4 Authors

The citations of an author depict his impact on a specific research field [75]. Here, the least articles threshold of a particular author is set as more than 10. Table 4 illustrates that 20 authors meet the criteria of more than 10 minimum relevant publications with the quantum of their articles and corresponding citations relevant to steel fiber-reinforced UHPC, as explored by employing VOSviewer on bibliographic data. An author’s credibility is difficult to know by considering all the factors, like overall citations, number of articles, average citations, etc., at once; instead, their ranking may be evaluated against each factor distinctly/individually. Accordingly, it is extracted by the analysis that Yoo D.Y., Wang J., and Wu C. are the three leading authors with 44, 26, and 24 publications, respectively. Wille K. has 1,744 citations, followed by Yoo D.Y, with 1,158 citations, and Khayat K.H. has 716 citations in the research field of steel fiber-reinforced UHPC. Figure 11 shows the connection between researchers with ten publications. It is concluded by performing this analysis that there is significant interconnectivity among authors, in terms of citations, who are researching steel fiber-reinforced UHPC.

Table 4

Authors having more than ten publications in steel fiber-reinforced UHPC research

S/N Author Number of publications Total number of citations
1 Yoo D. Y. 44 1,158
2 Wang J. 26 274
3 Wu C. 24 559
4 Li J. 23 512
5 Liu Z. 19 266
6 Liu J. 18 308
7 Khayat K. H. 17 716
8 Fehling E. 15 319
9 Gao X. 15 360
10 Kim S. 14 321
11 Zhang Y. 14 122
12 Fang Z. 13 90
13 Huang H. 12 212
14 Kim D. J. 12 546
15 Shi C. 12 683
16 Yang J. 12 63
17 Su Y. 11 409
18 Wille K. 11 1,744
19 Wu Z. 11 696
20 Xu S. 11 75
Figure 11 Scientific visualization of authors.
Figure 11

Scientific visualization of authors.

4.5 Documents

Regarding authors, the significance of a particular article in a specific field of research is demonstrated by the number of citations it receives. The articles with the highest citations are considered pioneers in a specific field. Figure 12 shows the citations based on inter-related articles’ scientific visualization and density concentration for publications in the steel fiber-reinforced UHPC research area. The citations based on inter-related publications extracted from VOSviewer are shown in Figure 12a. The frame dimensions in the case of a specific article are directly related to the influence of that particular article in the steel fiber-reinforced UHPC research. Additionally, the increased density concentrations for the citation-based leading publications are revealed from the density mapping shown in Figure 12b.

Figure 12 Scientific mapping of publications that have been published in the associated field of study: (a) connected articles based on citations and (b) the number of linked articles.
Figure 12

Scientific mapping of publications that have been published in the associated field of study: (a) connected articles based on citations and (b) the number of linked articles.

4.6 Countries

Among different countries in the world, some countries have contributed more publications in steel fiber-reinforced UHPC research than others, and those contributing countries are focused on producing more articles. For bibliophiles to evaluate the enthusiastic nations’ contributions to the study of steel fiber-reinforced UHPC, a methodical plot has been developed. This analysis sets the limit of the least articles from one country as 10. The 17 countries that meet the set criteria are listed in Table 5. It is observed that China, the United States, and South Korea are among the three leading countries that have produced 337, 150, and 96 publications, respectively. Additionally, the United States received 4,273 citations, followed by China, having 3,671 citations, and South Korea, has 2,220 citations. In Figure 13, the citations based on inter-connected countries are mapped in addition to the visualization of density concentration. The considered research field relevant article-based influence of a particular country is represented by the dimensions of the respective frame (Figure 13a). Likewise, it is revealed from Figure 13b that countries with the most publications depict higher density. The statistical and graphical output representation for participating countries will aid young scholars in forming scientific collaborations, establishing joint projects, and exchanging innovative concepts and methods. Academics from different nations interested in researching steel-reinforced UHPC may collaborate with relevant field experts to benefit from their expertise.

Table 5

Leading countries having more than ten published articles

S/N Country Number of publications Total number of citations
1 China 337 3,671
2 United States 150 4,273
3 South Korea 96 2,220
4 Germany 59 434
5 Canada 49 835
6 Australia 48 983
7 Czech Republic 22 147
8 Viet Nam 21 381
9 Austria 20 109
10 Hong Kong 17 141
11 Saudi Arabia 17 182
12 Taiwan 15 322
13 United Kingdom 15 318
14 Iraq 13 39
15 Singapore 13 290
16 Iran 12 76
17 Turkey 11 72
Figure 13 (a) Scientific network and (b) density visualizations of the nations involved in the relevant fields of study.
Figure 13

(a) Scientific network and (b) density visualizations of the nations involved in the relevant fields of study.

5 Discussions

UHPC is a modern cementitious composite with greatly improved mechanical properties compared to regular cementitious concrete [76]. Discontinuous fiber reinforcement is a crucial component of UHPC. Concrete can benefit from the addition of fibers in several ways, including increased energy absorption and significant tensile strength. When designing a UHPC mix, flexural and compressive strengths are crucial mechanical elements that are evaluated to determine ductility and strength. However, there is brittleness in UHPC that needs to be addressed. The strength and ductility of UHPC have been reported to improve by the addition of evenly distributed steel fibers having more tensile strength. In the literature, this type of concrete is frequently referred to as steel fiber-reinforced UHPC [77]. An important characteristic of UHPC that is often assessed in comparison to conventional concrete is its compressive strength [78]. The compressive behavior of UHPC having steel fibers does not significantly differ from that of normal concrete. The much increased stiffness and compressive strength of UHPC, however, make it stand out. A number of variables, such as the materials, mix design, fiber content, and curing procedure, affect the compressive strength of UHPC [78]. Researchers have published a number of studies on the increased compressive strength of UHPC reinforced with steel fibers [53,54,79,80,81,82,83,84,85,86,87,88]. Additionally, by incorporating steel fibers into UHPC, structural integrity can be attained by transferring load across cracks via crack bridging [89]. According to the literature, UHPC’s flexural tensile strength typically increases as the fiber content increases [90,91,92,93]. According to numerous research studies, longer steel fibers can enhance UHPC’s flexural strength by more than 20% [60,92,93,94,95,96].

Pull-out test (single) results used to establish bonding qualities indicate relationships with the UHPC production process, steel fiber form, content, orientation, and distribution [97]. On a microscopic scale, Figure 14 illustrates the interfacial transition zone (ITZ) of conventional concrete with UHPC, as reported by Mishra and Singh [36]. For UHPC to function properly overall, the bonding and pull-out behavior of the steel fibers within the matrix is essential. Several elements, including the steel fibers’ characteristics, the UHPC matrix’s chemical composition, and the curing conditions, have an impact on the bonding between the steel fibers and the matrix. To withstand tensile loads and prevent the pull-out of the steel fibers from the matrix, the binding strength between the steel fibers and the UHPC matrix is essential. A valuable tool for examining the microstructure and bonding properties of the steel fibers in UHPC is the scanning electron microscope (SEM). The SEM images in Figure 15 demonstrate a strong connection between the steel fiber and the concrete matrix around it, demonstrating how this bond can reduce stress concentrations and prevent the material’s internal deterioration, thereby improving mechanical properties. Steel fibers used in UHPC have a rough surface with tiny protrusions, which enhances the mechanical interaction between the fibers and matrix as seen in SEM images of the fibers. The steel fibers are evenly dispersed throughout the UHPC matrix, resulting in a dense and homogenous microstructure, as seen in SEM images. The area where the characteristics of both materials are altered as a result of bonding is known as the ITZ, which is situated between the fibers and the surrounding matrix [98,99]. The ITZ exhibits a complex microstructure as seen in SEM images, with cementitious paste adhering to the fiber surface and steel fibers partially embedded in the matrix. The bonding and pull-out behavior of the steel fibers in UHPC are greatly influenced by the ITZ.

Figure 14 SEM images for conventional concrete and UHPC ITZ [36].
Figure 14

SEM images for conventional concrete and UHPC ITZ [36].

Figure 15 SEM images of steel fiber bonding with the concrete matrix [100].
Figure 15

SEM images of steel fiber bonding with the concrete matrix [100].

Every day, more scientists are gaining interest in UHPC research and commercial applications. UHPC still has drawbacks, such as a lack of internationally recognized design codes, unclear structural capabilities for extended usage, and a lack of knowledge of material categorization techniques, even though it has achieved recognition in many nations. The design of thin, lightweight buildings is the key to maximizing their use [30], in addition to low maintenance, a smaller environmental impact, and lower costs overall [101,102]. Steel fiber-reinforced UHPC is frequently used in bridge deck overlays, bridge columns, and bridge beams [103,104,105]. Moreover, it is employed in the construction of various types of infrastructures, including retaining walls, roadways, and tunnels [106]. Moreover, steel fiber-reinforced UHPC is used in architectural applications such as façades, cladding, and decorative panels due to its superior strength and durability [107,108]. Because of its outstanding durability and wear resistance, steel fiber-reinforced UHPC is widely utilized in industrial flooring applications [109]. Additionally, because of its great strength and capacity to bear impact and blast loads, steel fiber-reinforced UHPC is suitable for building blast-resistant structures [110,111]. Moreover, to increase a building’s resilience to earthquake loads, steel fiber-reinforced UHPC is also employed during seismic retrofitting [112,113]. Moreover, due to its strong resistance to corrosion, steel fiber-reinforced UHPC is widely employed in the building of marine constructions including ports, harbors, and offshore platforms [114,115]. Overall, the superior characteristics of UHPC having steel fibers make it an ideal material for numerous civil engineering structural applications in the field of construction.

The variety of fiber composition, combination, shape, orientation, and distribution may be responsible for the complexity of UHPC structural design. Steel fibers might also be responsible for the higher costs and carbon footprints of UHPC. Hence, expanding knowledge of the impacts of steel fibers on UHPC is essential for developing widely used UHPC applications and standard design standards. The existing typical review literature, such as review-based manual studies, is insufficient for connecting various aspects of the literature precisely and comprehensively. However, in this systematic review, mapping bibliographic data and its statistical analysis on the steel fiber-reinforced UHPC research. In this method, researchers who have published the most articles and received the most citations in the field of steel fiber-reinforced UHPC are identified, along with the keywords that are most frequently used, more related articles contributing countries, more related articles producing journals, and the most viable researchers. The assessment of keywords shows that the compressive strength of UHPC with the addition of steel fibers is mainly investigated for achieving the high strength of UHPC. Likewise, the highest contributing countries in under-studied research areas are categorized by the literature with linkages based on citations. This analysis will help academics collaborate to progress research in this domain.

6 Conclusions

Current developments in scientific communication methods have sparked the development of novel bibliometric measures, which establish reliable value scales through mathematical and statistical research. These measures make it possible to evaluate the number of research contributions made by various individuals, organizations, countries, and groupings. The main aim of this study is to perform the scientometric analysis of the existing literature on steel fiber-reinforced UHPC using a database of 838 papers that were collected from Scopus and reviewed with VOSviewer software. This study arrives at a number of conclusions.

  • The top three journals in this field, with 118, 46, and 44 articles, are “Construction and Building Materials,” “Engineering Structures,” and “Cement and Concrete Composites,” respectively, according to a review of pertinent articles on steel fibers in UHPC. As of December 2022, Engineering Structures, Cement and Concrete Research, and IOP Conference Series: Materials Science and Engineering have the most citations overall, with 3,221, 1,713, and 950 citations, respectively.

  • The most often employed keywords for studies on UHPC with steel fibers, according to an analysis of keywords, are compressive strength, UHPC, and steel fibers. This evaluation also demonstrates that the key objective of research in UHPC with steel fibers has been to produce high-strength concrete.

  • In the field of steel fiber-reinforced UHPC research, 27 researchers have written more than ten papers, according to an analysis of their authorship. Yoo D.Y., Wang J., and Wu C. are the three authors who have published the most, with 44, 26, and 24 publications, respectively. The author with the most citations overall in the steel fiber-reinforced UHPC research is Wille K., with 1,744, followed by Yoo D.Y. with 1,158, and Khayat K.H. in the third place with 716.

  • According to a ranking of the top countries for steel fiber-reinforced UHPC research, at least 10 articles have been contributed by 17 different countries. With 337, 150, and 96 papers, China, the United States, and South Korea, respectively, have published the most relevant publications. The United States leads all other countries in the number of citations with 4,273, followed by China with 3,671, and South Korea with 2,220.

  • Steel fiber-reinforced UHPC is a versatile material with superior mechanical properties that makes it suitable for a variety of applications in the construction industry, including, bridge deck overlays, beams, columns, blast-resistant structures, seismic retrofitting of buildings, marine structures, and industrial flooring.

  • It has been shown that the strength and ductility of UHPC can be enhanced by the addition of evenly distributed steel fibers with higher ultimate elongation and tensile strength. This results in better material properties, such as a higher energy absorption capacity and substantial tensile strength. A key factor in the bonding and pull-out behavior of the steel fibers in UHPC is the ITZ.

  • A number of factors, including fiber content, mix design, and supplementary cementitious materials, have an effect on the development and applications of steel fiber-reinforced UHPC. Unfortunately, knowledge of factors like toughness, steel fiber hybridization, life cycle assessment, bonding process, and life cycle cost analysis is lacking. As a result, more investigation and thorough research into steel fiber-reinforced UHPC are required.

7 Future recommendations

By utilizing the scientometric analysis to evaluate keywords and the related literature, this study highlights the potential future directions of UHPC reinforced with steel fibers. After conducting a scientometric analysis on UHPC reinforced with steel fibers, the study suggests the following possibilities for future research in this field:

  • Taking into account the establishment of several standards for UHPC, comparative studies between various suggested standards will be beneficial for scientific discussions for associating the novel research with existing ones while maintaining all other factors constant [116].

  • A detailed and precise analysis of the bonding mechanism between steel fibers and the UHPC matrix is required in order to comprehend the mechanical properties of UHPC for structural applications.

  • Carbon, mineral, and synthetic fibers, in addition to steel, have particular effects on the performance of UHPC. Thus, adding such fibers to enhance UHPC performance in accordance with their characteristics needs to be investigated.

  • Further study on improving the bonding process between fiber and matrix by treating fibers chemically and physically is strongly encouraged.

  • To stop the development and progression of cracks in UHPC, the idea of steel fiber hybridization [117] that combines steel fibers of various lengths and shapes should be further investigated.

  • It is also advised to use Artificial Intelligence-based Machine Learning methodologies for designing steel fiber-reinforced UHPC in an effort to conserve natural resources and use less energy, money, and time. This enables the optimization of a number of variables, such as the fiber length, form, content, mix design, w/c ratio, and the supplementary cementitious material contents [118,119].

  • Last, but not the least, it is also necessary to comprehend life cycle cost analysis and life cycle assessment before steel fiber-reinforced UHPC can be applied following large-scale manufacture.

Acknowledgments

The authors acknowledge the support by the Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia (Project No. GRANT3118).

  1. Funding information: This work was supported by the Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia (Project No. GRANT3118).

  2. Author contributions: Wei Zheng: conceptualization, investigation, methodology, formal analysis, writing – original draft, writing – review and editing. Muhammad Nasir Amin: conceptualization, investigation, methodology, formal analysis, funding acquisition, writing – review and editing, supervision. Kaffayatullah Khan: formal analysis, resources, funding acquisition, investigation, methodology, writing – review and editing. Muhammad Sufian: data curation, formal analysis, visualization, writing – review and editing. Ahmed Farouk Deifalla: data acquisition, software, funding acquisition, validation, supervision. All authors have accepted responsibility for the entire content of this manuscript and approved its submission.

  3. Conflict of interest: The authors state no conflict of interest.

  4. Data availability statement: The datasets generated during and/or analysed during the current study are available from the corresponding author on reasonable request.

References

[1] Qi, B., S. Gao, and P. Xu. The application of recycled epoxy plastic sheets waste to replace concrete in urban construction and building. Processes, Vol. 11, No. 1, 2023, id. 201.10.3390/pr11010201Search in Google Scholar

[2] Qi, B., S. Gao, and P. Xu. The application of rubber aggregate-combined permeable concrete mixture in Sponge City construction. Coatings, Vol. 13, No. 1, 2023, id. 87.10.3390/coatings13010087Search in Google Scholar

[3] Zhang, Z., G. Liang, Q. Niu, F. Wang, J. Chen, B. Zhao, et al. A Wiener degradation process with drift‐based approach of determining target reliability index of concrete structures. Quality and Reliability Engineering International, Vol. 38, No. 7, 2022, pp. 3710–3725.10.1002/qre.3168Search in Google Scholar

[4] Farooqi, M. U. and M. Ali. Contribution of plant fibers in improving the behavior and capacity of reinforced concrete for structural applications. Construction and Building Materials, Vol. 182, 2018, pp. 94–107.10.1016/j.conbuildmat.2018.06.041Search in Google Scholar

[5] Sun, L., C. Wang, C. Zhang, Z. Yang, C. Li, and P. Qiao. Experimental investigation on the bond performance of sea sand coral concrete with FRP bar reinforcement for marine environments. Advances in Structural Engineering, Vol. 26, No. 3, 2022, pp. 533–546.10.1177/13694332221131153Search in Google Scholar

[6] Zhang, W., S. Kang, Y. Huang, and X. Liu. Behavior of reinforced concrete beams without stirrups and strengthened with basalt fiber–reinforced polymer sheets. Journal of Composites for Construction, Vol. 27, No. 2, 2023, id. 04023007.10.1061/JCCOF2.CCENG-4082Search in Google Scholar

[7] Qin, Y., X. Zhang, J. Chai, Z. Xu, and S. Li. Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete. Construction and Building Materials, Vol. 194, 2019, pp. 216–225.10.1016/j.conbuildmat.2018.11.042Search in Google Scholar

[8] Rezaie, A. B., M. Liebscher, M. Ranjbarian, F. Simon, C. Zimmerer, A. Drechsler, et al. Enhancing the interfacial bonding between PE fibers and cementitious matrices through polydopamine surface modification. Composites Part B: Engineering, Vol. 217, 2021, id. 108817.10.1016/j.compositesb.2021.108817Search in Google Scholar

[9] Meng, Z., L. Li, M. U. Farooqi, L. Feng, and L. Wang. Fiber factor for fresh and hardened properties of polyethylene fiber-reinforced geopolymer mortar. Journal of Building Engineering, Vol. 53, 2022, id. 104556.10.1016/j.jobe.2022.104556Search in Google Scholar

[10] Zhang, Y., X. Li, Y. Zhu, and X. Shao. Experimental study on flexural behavior of damaged reinforced concrete (RC) beam strengthened by toughness-improved ultra-high performance concrete (UHPC) layer. Composites Part B: Engineering, Vol. 186, 2020, id. 107834.10.1016/j.compositesb.2020.107834Search in Google Scholar

[11] Huang, Y., J. Huang, W. Zhang, and X. Liu. Experimental and numerical study of hooked-end steel fiber-reinforced concrete based on the meso-and macro-models. Composite Structures, Vol. 309, 2023, id. 116750.10.1016/j.compstruct.2023.116750Search in Google Scholar

[12] Farooqi, M. U. and M. Ali. A study on natural fibre reinforced concrete from materials to structural applications. Arabian Journal for Science and Engineering, Vol. 48, No. 4, 2022, pp. 4471–4491.10.1007/s13369-022-06977-1Search in Google Scholar

[13] Farooqi, M. U. and M. Ali. Effect of pre-treatment and content of wheat straw on energy absorption capability of concrete. Construction and Building Materials, Vol. 224, 2019, pp. 572–583.10.1016/j.conbuildmat.2019.07.086Search in Google Scholar

[14] Ahmad, W., S. H. Farooq, M. Usman, M. Khan, A. Ahmad, F. Aslam, et al. Effect of coconut fiber length and content on properties of high strength concrete. Materials, Vol. 13, No. 5, 2020, id. 1075.10.3390/ma13051075Search in Google Scholar PubMed PubMed Central

[15] Khan, U. A., H. M. Jahanzaib, M. Khan, and M. Ali, editors. Improving the tensile energy absorption of high strength natural fiber reinforced concrete with fly-ash for bridge girders. Key Engineering Materials, Trans Tech Publ, Vol. 765, 2018, pp. 335–342.10.4028/www.scientific.net/KEM.765.335Search in Google Scholar

[16] Akbar, A. and K. Liew. Multicriteria performance evaluation of fiber-reinforced cement composites: An environmental perspective. Composites Part B: Engineering, Vol. 218, 2021, id. 108937.10.1016/j.compositesb.2021.108937Search in Google Scholar

[17] Khan, M., M. Cao, and M. Ali. Effect of basalt fibers on mechanical properties of calcium carbonate whisker-steel fiber reinforced concrete. Construction and Building Materials, Vol. 192, 2018, pp. 742–753.10.1016/j.conbuildmat.2018.10.159Search in Google Scholar

[18] Khan, M., M. Cao, C. Xie, and M. Ali. Efficiency of basalt fiber length and content on mechanical and microstructural properties of hybrid fiber concrete. Fatigue & Fracture of Engineering Materials & Structures, Vol. 44, No. 8, 2021, pp. 2135–2152.10.1111/ffe.13483Search in Google Scholar

[19] Khan, M., M. Cao, S. Chu, and M. Ali. Properties of hybrid steel-basalt fiber reinforced concrete exposed to different surrounding conditions. Construction and Building Materials, Vol. 322, 2022, id. 126340.10.1016/j.conbuildmat.2022.126340Search in Google Scholar

[20] Li, P., M. J. Sluijsmans, H. Brouwers, and Q. Yu. Functionally graded ultra-high performance cementitious composite with enhanced impact properties. Composites Part B: Engineering, Vol. 183, 2020, id. 107680.10.1016/j.compositesb.2019.107680Search in Google Scholar

[21] Ye, J., C. Cui, J. Yu, K. Yu, and J. Xiao. Fresh and anisotropic-mechanical properties of 3D printable ultra-high ductile concrete with crumb rubber. Composites Part B: Engineering, Vol. 211, 2021, id. 108639.10.1016/j.compositesb.2021.108639Search in Google Scholar

[22] Cao, Y., G. Liu, H. Brouwers, and Q. Yu. Enhancing the low-velocity impact resistance of ultra-high performance concrete by an optimized layered-structure concept. Composites Part B: Engineering, Vol. 200, 2020, id. 108221.10.1016/j.compositesb.2020.108221Search in Google Scholar

[23] Khan, M., M. Cao, and M. Ali. Influence of CaCO3 whiskers, steel fibers and basalt fibers hybridization on flexural toughness of concrete. Fifth International Conference on Sustainable Construction Materials and Technologies, London, 2019.10.18552/2019/IDSCMT5118Search in Google Scholar

[24] Zhao, G., L. Shi, G. Yang, X. Zhuang, and B. Cheng. 3D fibrous aerogels from 1D polymer nanofibers for energy and environmental applications. Journal of Materials Chemistry A, Vol. 11, No. 2, 2023, pp. 512–547.10.1039/D2TA05984CSearch in Google Scholar

[25] Khalid, M. Y., R. Imran, Z. U. Arif, N. Akram, H. Arshad, A. Al Rashid, et al. Developments in chemical treatments, manufacturing techniques and potential applications of natural-fibers-based biodegradable composites. Coatings, Vol. 11, No. 3, 2021, id. 293.10.3390/coatings11030293Search in Google Scholar

[26] Shi, C., Z. Wu, J. Xiao, D. Wang, Z. Huang, and Z. Fang. A review on ultra high performance concrete: Part I. Raw materials and mixture design. Construction and Building Materials, Vol. 101, 2015, pp. 741–751.10.1016/j.conbuildmat.2015.10.088Search in Google Scholar

[27] Meng, Q., C. Wu, J. Li, Z. Liu, P. Wu, Y. Yang, et al. Steel/basalt rebar reinforced Ultra-High Performance Concrete components against methane-air explosion loads. Composites Part B: Engineering, Vol. 198, 2020, id. 108215.10.1016/j.compositesb.2020.108215Search in Google Scholar

[28] Standard, A.S. Standard practice for fabricating and testing Specimens of ultra-high performance concrete, ASTM International, West Conshohocken, PA, 2017.Search in Google Scholar

[29] Qin, J., F. Dai, H. Ma, X. Dai, Z. Li, X. Jia, et al. Development and characterization of magnesium phosphate cement based ultra-high performance concrete. Composites Part B: Engineering, Vol. 234, 2022, id. 109694.10.1016/j.compositesb.2022.109694Search in Google Scholar

[30] Yoo, D.-Y. and N. Banthia. Mechanical properties of ultra-high-performance fiber-reinforced concrete: A review. Cement and Concrete Composites, Vol. 73, 2016, pp. 267–80.10.1016/j.cemconcomp.2016.08.001Search in Google Scholar

[31] Xu, S., F. Zhou, Q. Li, and P. Wu. A novel dynamic cavity expansion model to predict the resistance of reactive powder concrete (RPC) against projectile impact. Composites Part B: Engineering, Vol. 223, 2021, id. 109107.10.1016/j.compositesb.2021.109107Search in Google Scholar

[32] 239 AC. Ultra-high-performance Concrete: An Emerging Technology Report (ACI 239R-18), American Concrete Institute, 2018.Search in Google Scholar

[33] JSCE F. Recommendations for design and construction of ultra-high strength fiber reinforced concrete structures (Draft), Japan Society of Civil Engineers Tokyo, Japan, 2004.Search in Google Scholar

[34] Graybeal, B. A. Material property characterization of ultra-high performance concrete. United States. Federal Highway Administration, Office of Infrastructure, 2006.Search in Google Scholar

[35] Schmidt, M. and E. Fehling. Ultra-high-performance concrete: research, development and application in Europe. ACI Special Publication, Vol. 228, No. 1, 2005, pp. 51–78.Search in Google Scholar

[36] Mishra, O. and S. Singh. An overview of microstructural and material properties of ultra-high-performance concrete. Journal of Sustainable Cement-Based Materials, Vol. 8, No. 2, 2019, pp. 97–143.10.1080/21650373.2018.1564398Search in Google Scholar

[37] Van Tuan, N., G. Ye, K. Van Breugel, A. L. Fraaij, and D. Dai Bui. The study of using rice husk ash to produce ultra high performance concrete. Construction and Building Materials, Vol. 25, No. 4, 2011, pp. 2030–2035.10.1016/j.conbuildmat.2010.11.046Search in Google Scholar

[38] Yazıcı, H. The effect of curing conditions on compressive strength of ultra high strength concrete with high volume mineral admixtures. Building and Environment, Vol. 42, No. 5, 2007, pp. 2083–2089.10.1016/j.buildenv.2006.03.013Search in Google Scholar

[39] Rong, Z., W. Sun, H. Xiao, and G. Jiang. Effects of nano-SiO2 particles on the mechanical and microstructural properties of ultra-high performance cementitious composites. Cement and Concrete Composites, Vol. 56, 2015, pp. 25–31.10.1016/j.cemconcomp.2014.11.001Search in Google Scholar

[40] Wu, Z., K. H. Khayat, and C. Shi. Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete. Cement and Concrete Research, Vol. 95, 2017, pp. 247–256.10.1016/j.cemconres.2017.02.031Search in Google Scholar

[41] Yu, R., P. Spiesz, and H. Brouwers. Development of an eco-friendly ultra-high performance concrete (UHPC) with efficient cement and mineral admixtures uses. Cement and Concrete Composites, Vol. 55, 2015, pp. 383–94.10.1016/j.cemconcomp.2014.09.024Search in Google Scholar

[42] Chen, X., D.-W. Wan, L.-Z. Jin, K. Qian, and F. Fu. Experimental studies and microstructure analysis for ultra high-performance reactive powder concrete. Construction and Building Materials, Vol. 229, 2019, id. 116924.10.1016/j.conbuildmat.2019.116924Search in Google Scholar

[43] Lao, J.-C., B.-T. Huang, L.-Y. Xu, M. Khan, Y. Fang, and J.-G. Dai. Seawater sea-sand Engineered Geopolymer Composites (EGC) with high strength and high ductility. Cement and Concrete Composites, Vol. 138, 2023, id. 104998.10.1016/j.cemconcomp.2023.104998Search in Google Scholar

[44] Ahmad, M. R., C. S. Das, M. Khan, and J.-G. Dai. Development of low-carbon alkali-activated materials solely activated by flue gas residues (FGR) waste from incineration plants. Journal of Cleaner Production, Vol. 397, 2023, id. 136597.10.1016/j.jclepro.2023.136597Search in Google Scholar

[45] Riaz Ahmad, M., M. Khan, A. Wang, Z. Zhang, and J.-G. Dai. Alkali-activated materials partially activated using flue gas residues: An insight into reaction products. Construction and Building Materials, Vol. 371, 2023, id. 130760.10.1016/j.conbuildmat.2023.130760Search in Google Scholar

[46] Lao, J.-C., L.-Y. Xu, B.-T. Huang, J.-X. Zhu, M. Khan, and J.-G. Dai. Utilization of sodium carbonate activator in strain-hardening ultra-high-performance geopolymer concrete (SH-UHPGC). Frontiers in Materials, Vol. 10, 2023, pp. 1–12.10.3389/fmats.2023.1142237Search in Google Scholar

[47] Qi, B., P. Xu, and C. Wu. Analysis of the infiltration and water storage performance of recycled brick mix aggregates in Sponge City construction. Water, Vol. 15, No. 2, 2023, id. 363.10.3390/w15020363Search in Google Scholar

[48] Li, S., O. M. Jensen, Z. Wang, and Q. Yu. Influence of micromechanical property on the rate-dependent flexural strength of ultra-high performance concrete containing coarse aggregates (UHPC-CA). Composites Part B: Engineering, Vol. 227, 2021, id. 109394.10.1016/j.compositesb.2021.109394Search in Google Scholar

[49] KCI-M-12-003. Design recommendations for ultra-high performance concrete K-UHPC, Korea Concrete Institute Seoul, 2012.Search in Google Scholar

[50] Niu, Y., H. Huang, J. Zhang, W. Jin, J. Wei, and Q. Yu. Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique. Cement and Concrete Research, Vol. 125, 2019, id. 105821.10.1016/j.cemconres.2019.105821Search in Google Scholar

[51] Yu, R., P. Spiesz, and H. Brouwers. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC). Cement and Concrete Research, Vol. 56, 2014, pp. 29–39.10.1016/j.cemconres.2013.11.002Search in Google Scholar

[52] Park, J.-S., Y. J. Kim, J.-R. Cho, and S.-J. Jeon. Early-age strength of ultra-high performance concrete in various curing conditions. Materials, Vol. 8, No. 8, 2015, pp. 5537–5553.10.3390/ma8085261Search in Google Scholar PubMed PubMed Central

[53] Wu, Z., C. Shi, W. He, and L. Wu. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Construction and Building Materials, Vol. 103, 2016, pp. 8–14.10.1016/j.conbuildmat.2015.11.028Search in Google Scholar

[54] Wang, C., C. Yang, F. Liu, C. Wan, and X. Pu. Preparation of ultra-high performance concrete with common technology and materials. Cement and Concrete Composites, Vol. 34, No. 4, 2012, pp. 538–544.10.1016/j.cemconcomp.2011.11.005Search in Google Scholar

[55] Wang, R., X. Gao, H. Huang, and G. Han. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC. Construction and Building Materials, Vol. 144, 2017, pp. 65–73.10.1016/j.conbuildmat.2017.03.173Search in Google Scholar

[56] Dils, J., G. De Schutter, and V. Boel. Influence of mixing procedure and mixer type on fresh and hardened properties of concrete: a review. Materials and Structures, Vol. 45, No. 11, 2012, pp. 1673–1683.10.1617/s11527-012-9864-8Search in Google Scholar

[57] Wu, Z., C. Shi, and K. H. Khayat. Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape. Composites Part B: Engineering, Vol. 174, 2019, id. 107021.10.1016/j.compositesb.2019.107021Search in Google Scholar

[58] Park, S. H., D. J. Kim, G. S. Ryu, and K. T. Koh. Tensile behavior of ultra high performance hybrid fiber reinforced concrete. Cement and Concrete Composites, Vol. 34, No. 2, 2012, pp. 172–184.10.1016/j.cemconcomp.2011.09.009Search in Google Scholar

[59] Wu, Z., C. Shi, W. He, and D. Wang. Uniaxial compression behavior of ultra-high performance concrete with hybrid steel fiber. Journal of Materials in Civil Engineering, Vol. 28, No. 12, 2016, id. 06016017.10.1061/(ASCE)MT.1943-5533.0001684Search in Google Scholar

[60] Wu, Z., C. Shi, W. He, and D. Wang. Static and dynamic compressive properties of ultra-high performance concrete (UHPC) with hybrid steel fiber reinforcements. Cement and Concrete Composites, Vol. 79, 2017, pp. 148–157.10.1016/j.cemconcomp.2017.02.010Search in Google Scholar

[61] Yoo, D.-Y., S.-W. Kim, and J.-J. Park. Comparative flexural behavior of ultra-high-performance concrete reinforced with hybrid straight steel fibers. Construction and Building Materials, Vol. 132, 2017, pp. 219–229.10.1016/j.conbuildmat.2016.11.104Search in Google Scholar

[62] Yoo, D.-Y., J.-J. Kim, and B. Chun. Dynamic pullout behavior of half-hooked and twisted steel fibers in ultra-high-performance concrete containing expansive agents. Composites Part B: Engineering, Vol. 167, 2019, pp. 517–532.10.1016/j.compositesb.2019.03.022Search in Google Scholar

[63] Markoulli, M. P., C. I. Lee, E. Byington, and W. A. Felps. Mapping human resource management: Reviewing the field and charting future directions. Human Resource Management Review, Vol. 27, No. 3, 2017, pp. 367–396.10.1016/j.hrmr.2016.10.001Search in Google Scholar

[64] Amin, M. N., W. Ahmad, K. Khan, and M. M. Sayed. Mapping research knowledge on rice husk ash application in concrete: A scientometric review. Materials, Vol. 15, No. 10, 2022, id. 3431.10.3390/ma15103431Search in Google Scholar PubMed PubMed Central

[65] Afgan, S. and C. Bing. Scientometric review of international research trends on thermal energy storage cement based composites via integration of phase change materials from 1993 to 2020. Construction and Building Materials, Vol. 278, 2021, id. 122344.10.1016/j.conbuildmat.2021.122344Search in Google Scholar

[66] Huang, S., H. Wang, W. Ahmad, A. Ahmad, N. Ivanovich Vatin, A. M. Mohamed, et al. Plastic waste management strategies and their environmental aspects: A scientometric analysis and comprehensive review. International Journal of Environmental Research and Public Health, Vol. 19, No. 8, 2022, id. 4556.10.3390/ijerph19084556Search in Google Scholar PubMed PubMed Central

[67] Jin, R., S. Gao, A. Cheshmehzangi, and E. Aboagye-Nimo. A holistic review of off-site construction literature published between 2008 and 2018. Journal of Cleaner Production, Vol. 202, 2018, pp. 1202–1219.10.1016/j.jclepro.2018.08.195Search in Google Scholar

[68] Park, J. Y. and Z. Nagy. Comprehensive analysis of the relationship between thermal comfort and building control research-A data-driven literature review. Renewable and Sustainable Energy Reviews, Vol. 82, 2018, pp. 2664–2679.10.1016/j.rser.2017.09.102Search in Google Scholar

[69] Oraee, M., M. R. Hosseini, E. Papadonikolaki, R. Palliyaguru, and M. Arashpour. Collaboration in BIM-based construction networks: A bibliometric-qualitative literature review. International Journal of Project Management, Vol. 35, No. 7, 2017, pp. 1288–1301.10.1016/j.ijproman.2017.07.001Search in Google Scholar

[70] Zuo, J. and Z.-Y. Zhao. Green building research–current status and future agenda: A review. Renewable and Sustainable Energy Reviews, Vol. 30, 2014, pp. 271–281.10.1016/j.rser.2013.10.021Search in Google Scholar

[71] Darko, A., C. Zhang, and A. P. Chan. Drivers for green building: A review of empirical studies. Habitat International, Vol. 60, 2017, pp. 34–49.10.1016/j.habitatint.2016.12.007Search in Google Scholar

[72] Ahmad, W., M. Khan, and P. Smarzewski. Effect of short fiber reinforcements on fracture performance of cement-based materials: A systematic review approach. Materials, Vol. 14, No. 7, 2021, id. 1745.10.3390/ma14071745Search in Google Scholar PubMed PubMed Central

[73] Wuni, I. Y., G. Q. Shen, and R. Osei-Kyei. Scientometric review of global research trends on green buildings in construction journals from 1992 to 2018. Energy and Buildings, Vol. 190, 2019, pp. 69–85.10.1016/j.enbuild.2019.02.010Search in Google Scholar

[74] Song, H., J. Liu, K. He, and W. Ahmad. A comprehensive overview of jute fiber reinforced cementitious composites. Case Studies in Construction Materials, Vol. 15, 2021, id. e00724.10.1016/j.cscm.2021.e00724Search in Google Scholar

[75] Yu, F. and B. E. Hayes. Applying data analytics and visualization to assessing the research impact of the Cancer Cell Biology (CCB) Program at the University of North Carolina at Chapel Hill. Journal of e Science Librarianship, Vol. 7, No. 1, 2018, id. 4.10.7191/jeslib.2018.1123Search in Google Scholar

[76] Russell, H., B. Graybeal, and H. Russell. Ultra-high performance concrete: A state-of-the-art report for the bridge community. Rep. No. FHWA-HRT-13-060, Federal Highway Administration, Washington, DC, 2013.Search in Google Scholar

[77] Qu, D., X. Cai, and W. Chang. Evaluating the effects of steel fibers on mechanical properties of ultra-high performance concrete using artificial neural networks. Applied Sciences, Vol. 8, No. 7, 2018, id. 1120.10.3390/app8071120Search in Google Scholar

[78] Russell, H. G., B. A. Graybeal, and H. G. Russell. Ultra-high performance concrete: A state-of-the-art report for the bridge community. United States. Federal Highway Administration, Office of Infrastructure, 2013.Search in Google Scholar

[79] Bae, B.-I., H.-K. Choi, B.-S. Lee, and C.-H. Bang. Compressive behavior and mechanical characteristics and their application to stress-strain relationship of steel fiber-reinforced reactive powder concrete. Advances in Materials Science and Engineering, Vol. 2016, 2016, id. 2016.10.1155/2016/6465218Search in Google Scholar

[80] Arora, A., Y. Yao, B. Mobasher, and N. Neithalath. Fundamental insights into the compressive and flexural response of binder-and aggregate-optimized ultra-high performance concrete (UHPC). Cement and Concrete Composites, Vol. 98, 2019, pp. 1–13.10.1016/j.cemconcomp.2019.01.015Search in Google Scholar

[81] Ibrahim, M. A., M. Farhat, M. A. Issa, and J. A. Hasse. Effect of material constituents on mechanical and fracture mechanics properties of ultra-high-performance concrete. ACI Materials Journal, Vol. 114, No. 3, 2017, pp. 453–465.10.14359/51689717Search in Google Scholar

[82] Liu, J., F. Han, G. Cui, Q. Zhang, J. Lv, L. Zhang, et al. Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete. Construction and Building Materials, Vol. 121, 2016, pp. 310–318.10.1016/j.conbuildmat.2016.05.039Search in Google Scholar

[83] Shafieifar, M., M. Farzad, and A. Azizinamini. Experimental and numerical study on mechanical properties of Ultra High Performance Concrete (UHPC). Construction and Building Materials, Vol. 156, 2017, pp. 402–411.10.1016/j.conbuildmat.2017.08.170Search in Google Scholar

[84] Wu, Z., K. H. Khayat, and C. Shi. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content. Cement and Concrete Research, Vol. 123, 2019, id. 105786.10.1016/j.cemconres.2019.105786Search in Google Scholar

[85] Mo, Z., R. Wang, and X. Gao. Hydration and mechanical properties of UHPC matrix containing limestone and different levels of metakaolin. Construction and Building Materials, Vol. 256, 2020, id. 119454.10.1016/j.conbuildmat.2020.119454Search in Google Scholar

[86] Hung, C.-C., Y.-T. Chen, and C.-H. Yen. Workability, fiber distribution, and mechanical properties of UHPC with hooked end steel macro-fibers. Construction and Building Materials, Vol. 260, 2020, id. 119944.10.1016/j.conbuildmat.2020.119944Search in Google Scholar

[87] Teng, L., W. Meng, and K. H. Khayat. Rheology control of ultra-high-performance concrete made with different fiber contents. Cement and Concrete Research, Vol. 138, 2020, id. 106222.10.1016/j.cemconres.2020.106222Search in Google Scholar

[88] Yu, R., P. Spiesz, and H. J.H. Brouwers. Effect of nano-silica on the hydration and microstructure development of ultra-high performance concrete (UHPC) with a low binder amount. Construction and Building Materials, Vol. 65, 2014, pp. 140–150.10.1016/j.conbuildmat.2014.04.063Search in Google Scholar

[89] Gu, M., H. Mo, J. Qiu, J. Yuan, and Q. Xia. Behavior of floating stone columns reinforced with geogrid encasement in model tests. Frontiers in Materials, Vol. 9, 2022, id. 980851.10.3389/fmats.2022.980851Search in Google Scholar

[90] Pakravan, H. R. and T. Ozbakkaloglu. Synthetic fibers for cementitious composites: A critical and in-depth review of recent advances. Construction and Building Materials, Vol. 207, 2019, pp. 491–518.10.1016/j.conbuildmat.2019.02.078Search in Google Scholar

[91] Abbas, S., A. M. Soliman, and M. L. Nehdi. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages. Construction and Building Materials, Vol. 75, 2015, pp. 429–441.10.1016/j.conbuildmat.2014.11.017Search in Google Scholar

[92] Yoo, D.-Y., S. Kim, G.-J. Park, J.-J. Park, and S.-W. Kim. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites. Composite Structures, Vol. 174, 2017, pp. 375–388.10.1016/j.compstruct.2017.04.069Search in Google Scholar

[93] Park, J.-J., D.-Y. Yoo, G.-J. Park, and S.-W. Kim. Feasibility of reducing the fiber content in ultra-high-performance fiber-reinforced concrete under flexure. Materials, Vol. 10, No. 2, 2017, id. 118.10.3390/ma10020118Search in Google Scholar PubMed PubMed Central

[94] Pourbaba, M., E. Asefi, H. Sadaghian, and A. Mirmiran. Effect of age on the compressive strength of ultra-high-performance fiber-reinforced concrete. Construction and Building Materials, Vol. 175, 2018, pp. 402–410.10.1016/j.conbuildmat.2018.04.203Search in Google Scholar

[95] Yoo, D.-Y., S.-T. Kang, and Y.-S. Yoon. Enhancing the flexural performance of ultra-high-performance concrete using long steel fibers. Composite Structures, Vol. 147, 2016, pp. 220–230.10.1016/j.compstruct.2016.03.032Search in Google Scholar

[96] Yoo, D.-Y., M. J. Kim, S.-W. Kim, and J.-J. Park. Development of cost effective ultra-high-performance fiber-reinforced concrete using single and hybrid steel fibers. Construction and Building Materials, Vol. 150, 2017, pp. 383–394.10.1016/j.conbuildmat.2017.06.018Search in Google Scholar

[97] Gong, J., Y. Ma, J. Fu, J. Hu, X. Ouyang, Z. Zhang, et al. Utilization of fibers in ultra-high performance concrete: A review. Composites Part B: Engineering, Vol. 241, 2022, id. 109995.10.1016/j.compositesb.2022.109995Search in Google Scholar

[98] Zhang, Z., Q. Yang, Z. Yu, H. Wang, and T. Zhang. Influence of Y2O3 addition on the microstructure of TiC reinforced Ti-based composite coating prepared by laser cladding. Materials Characterization, Vol. 189, 2022, id. 111962.10.1016/j.matchar.2022.111962Search in Google Scholar

[99] Liu, H., Z. Chen, Y. Liu, Y. Chen, Y. Du, and F. Zhou. Interfacial debonding detection for CFST structures using an ultrasonic phased array: Application to the Shenzhen SEG building. Mechanical Systems and Signal Processing, Vol. 192, 2023, id. 110214.10.1016/j.ymssp.2023.110214Search in Google Scholar

[100] Abbas, S., W. Abbass, M. L. Nehdi, A. Ahmed, and M. Yousaf. Investigation of Alkali-Silica reactivity in sustainable ultrahigh performance concrete. Sustainability, Vol. 13, No. 10, 2021, id. 5680.10.3390/su13105680Search in Google Scholar

[101] Millard, S. G., T. C.K. Molyneaux, S. J. Barnett, and X. Gao. Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading. International Journal of Impact Engineering, Vol. 37, No. 4, 2010, pp. 405–413.10.1016/j.ijimpeng.2009.09.004Search in Google Scholar

[102] Habel, K. and P. Gauvreau. Response of ultra-high performance fiber reinforced concrete (UHPFRC) to impact and static loading. Cement and Concrete Composites, Vol. 30, No. 10, 2008, pp. 938–946.10.1016/j.cemconcomp.2008.09.001Search in Google Scholar

[103] Voo, Y., S. Foster, and L. Pek. Ultra-high performance concrete—technology for present and future. Proceedings of the High Tech Concrete: Where Technology and Engineering Meet, Maastricht, The Netherlands, 2017, pp. 12–14.Search in Google Scholar

[104] Hajar, Z., M. Novarin, C. Servant, G. Généreux, D. Przybyla, and D. Bitar, editors. Innovative solution for strengthening orthotropic decks using UHPFRC: The Illzach bridge. Proceedings of International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, 2013.Search in Google Scholar

[105] Moreillon, L. and P. Menétrey, editors. Rehabilitation and strengthening of existing RC structures with UHPFRC: various applications. RILEM-fib-AFGC Int Symposium on Ultra-High Performance Fibre-Reinforced Concrete, RILEM Publication SARL;, France, 2013.Search in Google Scholar

[106] Gamarra, J. Potential application of ultra-high performance fiber-reinforced concrete with wet-mix shotcrete system in tunneling, University of Texas at Arlington, Texas, USA, 2016.Search in Google Scholar

[107] Aubry, S., P. Bompas, B. Vaudeville, D. Corvez, T. Lagrange, P. Mazzacane, et al., editors. A UHPFRC cladding challenge: the fondation Louis Vuitton pour la création” Iceberg”. 2nd RILEM-fib-AFGC International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, 2013.Search in Google Scholar

[108] Menétrey, P., editor. UHPFRC cladding for the Qatar National Museum. Proceedings of the International Symposium on Ultra-High Performance Fiber-Reinforced Concrete, Marseille, France, 2013.Search in Google Scholar

[109] Mazzacane, P., R. Ricciotti, G. Lamoureux, and D. Corvez, editors. Roofing of the stade Jean Bouin in UHPFRC. Proceedings of International Symposium on Ultra-High Performance Fibre-Reinforced Concrete, 2013.10.1002/9781118557839.ch8Search in Google Scholar

[110] Vande Voort, T. L., M. T. Suleiman, and S. Sritharan. Design and performance verification of ultra-high performance concrete piles for deep foundations, Transportation Research Board, The National Academies of Sciences, Engineering, and Medicine, Washington, DC, 2008.Search in Google Scholar

[111] Wu, C., D. J. Oehlers, M. Rebentrost, J. Leach, and A. S. Whittaker. Blast testing of ultra-high performance fibre and FRP-retrofitted concrete slabs. Engineering Structures, Vol. 31, No. 9, 2009, pp. 2060–2069.10.1016/j.engstruct.2009.03.020Search in Google Scholar

[112] Mazzacane, P., R. Ricciotti, F. Teply, E. Tollini, and D. Corvez. MUCEM: The builder’s perspective. Proceedings UHPFRC, 2013, pp. 3–16.Search in Google Scholar

[113] Corvez, D. and B. Masson. UHPFRC solutions for the retrofit of nuclear reactor containment walls. Proceedings UHPFRC, 2013, pp. 147–156.Search in Google Scholar

[114] Khan, M., S. Chu, X. Deng, and Y. Wang, editors. Protection of steel tube against corrosion using self-prestressing UHPC prepared with expansive agent and steel fibers. Structures, 2022, Vol. 37, pp. 95–108, Elsevier.10.1016/j.istruc.2021.12.076Search in Google Scholar

[115] Zeng, J.-J., P. Feng, J.-G. Dai, and Y. Zhuge. Development and behavior of novel FRP-UHPC tubular members. Engineering Structures, Vol. 266, 2022, id. 114540.10.1016/j.engstruct.2022.114540Search in Google Scholar

[116] Larsen, I. L. and R. T. Thorstensen. The influence of steel fibres on compressive and tensile strength of ultra high performance concrete: A review. Construction and Building Materials, Vol. 256, 2020, id. 119459.10.1016/j.conbuildmat.2020.119459Search in Google Scholar

[117] Khan, M., M. Cao, C. Xie, and M. Ali. Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression. Case Studies in Construction Materials, Vol. 16, 2022, id. e00941.10.1016/j.cscm.2022.e00941Search in Google Scholar

[118] Khan, M., J. Lao, and J.-G. Dai. Comparative study of advanced computational techniques for estimating the compressive strength of UHPC. Journal of Asian Concrete Federation, Vol. 8, No. 1, 2022, pp. 51–68.10.18702/acf.2022.6.8.1.51Search in Google Scholar

[119] Wang, Q., A. Hussain, M. U. Farooqi, and A. F. Deifalla. Artificial intelligence-based estimation of ultra-high-strength concrete’s flexural property. Case Studies in Construction Materials, Vol. 17, 2022, id. e01243.10.1016/j.cscm.2022.e01243Search in Google Scholar
Received: 2022-10-26
Revised: 2023-03-21
Accepted: 2023-04-04
Published Online: 2023-07-03

© 2023 the author(s), published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 International License.

Articles in the same Issue

  1. Review Articles
  2. Progress in preparation and ablation resistance of ultra-high-temperature ceramics modified C/C composites for extreme environment
  3. Solar lighting systems applied in photocatalysis to treat pollutants – A review
  4. Technological advances in three-dimensional skin tissue engineering
  5. Hybrid magnesium matrix composites: A review of reinforcement philosophies, mechanical and tribological characteristics
  6. Application prospect of calcium peroxide nanoparticles in biomedical field
  7. Research progress on basalt fiber-based functionalized composites
  8. Evaluation of the properties and applications of FRP bars and anchors: A review
  9. A critical review on mechanical, durability, and microstructural properties of industrial by-product-based geopolymer composites
  10. Multifunctional engineered cementitious composites modified with nanomaterials and their applications: An overview
  11. Role of bioglass derivatives in tissue regeneration and repair: A review
  12. Research progress on properties of cement-based composites incorporating graphene oxide
  13. Properties of ultra-high performance concrete and conventional concrete with coal bottom ash as aggregate replacement and nanoadditives: A review
  14. A scientometric review of the literature on the incorporation of steel fibers in ultra-high-performance concrete with research mapping knowledge
  15. Weldability of high nitrogen steels: A review
  16. Application of waste recycle tire steel fibers as a construction material in concrete
  17. Wear properties of graphene-reinforced aluminium metal matrix composite: A review
  18. Experimental investigations of electrodeposited Zn–Ni, Zn–Co, and Ni–Cr–Co–based novel coatings on AA7075 substrate to ameliorate the mechanical, abrasion, morphological, and corrosion properties for automotive applications
  19. Research evolution on self-healing asphalt: A scientometric review for knowledge mapping
  20. Recent developments in the mechanical properties of hybrid fiber metal laminates in the automotive industry: A review
  21. A review of microscopic characterization and related properties of fiber-incorporated cement-based materials
  22. Comparison and review of classical and machine learning-based constitutive models for polymers used in aeronautical thermoplastic composites
  23. Gold nanoparticle-based strategies against SARS-CoV-2: A review
  24. Poly-ferric sulphate as superior coagulant: A review on preparation methods and properties
  25. A review on ceramic waste-based concrete: A step toward sustainable concrete
  26. Modification of the structure and properties of oxide layers on aluminium alloys: A review
  27. A review of magnetically driven swimming microrobots: Material selection, structure design, control method, and applications
  28. Polyimide–nickel nanocomposites fabrication, properties, and applications: A review
  29. Design and analysis of timber-concrete-based civil structures and its applications: A brief review
  30. Effect of fiber treatment on physical and mechanical properties of natural fiber-reinforced composites: A review
  31. Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling
  32. A critical review on functionally graded ceramic materials for cutting tools: Current trends and future prospects
  33. Heme iron as potential iron fortifier for food application – characterization by material techniques
  34. An overview of the research trends on fiber-reinforced shotcrete for construction applications
  35. High-entropy alloys: A review of their performance as promising materials for hydrogen and molten salt storage
  36. Effect of the axial compression ratio on the seismic behavior of resilient concrete walls with concealed column stirrups
  37. Research Articles
  38. Effect of fiber orientation and elevated temperature on the mechanical properties of unidirectional continuous kenaf reinforced PLA composites
  39. Optimizing the ECAP processing parameters of pure Cu through experimental, finite element, and response surface approaches
  40. Study on the solidification property and mechanism of soft soil based on the industrial waste residue
  41. Preparation and photocatalytic degradation of Sulfamethoxazole by g-C3N4 nano composite samples
  42. Impact of thermal modification on color and chemical changes of African padauk, merbau, mahogany, and iroko wood species
  43. The evaluation of the mechanical properties of glass, kenaf, and honeycomb fiber-reinforced composite
  44. Evaluation of a novel steel box-soft body combination for bridge protection against ship collision
  45. Study on the uniaxial compression constitutive relationship of modified yellow mud from minority dwelling in western Sichuan, China
  46. Ultrasonic longitudinal torsion-assisted biotic bone drilling: An experimental study
  47. Green synthesis, characterizations, and antibacterial activity of silver nanoparticles from Themeda quadrivalvis, in conjugation with macrolide antibiotics against respiratory pathogens
  48. Performance analysis of WEDM during the machining of Inconel 690 miniature gear using RSM and ANN modeling approaches
  49. Biosynthesis of Ag/bentonite, ZnO/bentonite, and Ag/ZnO/bentonite nanocomposites by aqueous leaf extract of Hagenia abyssinica for antibacterial activities
  50. Eco-friendly MoS2/waste coconut oil nanofluid for machining of magnesium implants
  51. Silica and kaolin reinforced aluminum matrix composite for heat storage
  52. Optimal design of glazed hollow bead thermal insulation mortar containing fly ash and slag based on response surface methodology
  53. Hemp seed oil nanoemulsion with Sapindus saponins as a potential carrier for iron supplement and vitamin D
  54. A numerical study on thin film flow and heat transfer enhancement for copper nanoparticles dispersed in ethylene glycol
  55. Research on complex multimodal vibration characteristics of offshore platform
  56. Applicability of fractal models for characterising pore structure of hybrid basalt–polypropylene fibre-reinforced concrete
  57. Influence of sodium silicate to precursor ratio on mechanical properties and durability of the metakaolin/fly ash alkali-activated sustainable mortar using manufactured sand
  58. An experimental study of bending resistance of multi-size PFRC beams
  59. Characterization, biocompatibility, and optimization of electrospun SF/PCL composite nanofiber films
  60. Morphological classification method and data-driven estimation of the joint roughness coefficient by consideration of two-order asperity
  61. Prediction and simulation of mechanical properties of borophene-reinforced epoxy nanocomposites using molecular dynamics and FEA
  62. Nanoemulsions of essential oils stabilized with saponins exhibiting antibacterial and antioxidative properties
  63. Fabrication and performance analysis of sustainable municipal solid waste incineration fly ash alkali-activated acoustic barriers
  64. Electrostatic-spinning construction of HCNTs@Ti3C2T x MXenes hybrid aerogel microspheres for tunable microwave absorption
  65. Investigation of the mechanical properties, surface quality, and energy efficiency of a fused filament fabrication for PA6
  66. Experimental study on mechanical properties of coal gangue base geopolymer recycled aggregate concrete reinforced by steel fiber and nano-Al2O3
  67. Hybrid bio-fiber/bio-ceramic composite materials: Mechanical performance, thermal stability, and morphological analysis
  68. Experimental study on recycled steel fiber-reinforced concrete under repeated impact
  69. Effect of rare earth Nd on the microstructural transformation and mechanical properties of 7xxx series aluminum alloys
  70. Color match evaluation using instrumental method for three single-shade resin composites before and after in-office bleaching
  71. Exploring temperature-resilient recycled aggregate concrete with waste rubber: An experimental and multi-objective optimization analysis
  72. Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics
  73. Evolution of the pore structure of pumice aggregate concrete and the effect on compressive strength
  74. Effect of alkaline treatment time of fibers and microcrystalline cellulose addition on mechanical properties of unsaturated polyester composites reinforced by cantala fibers
  75. Optimization of eggshell particles to produce eco-friendly green fillers with bamboo reinforcement in organic friction materials
  76. An effective approach to improve microstructure and tribological properties of cold sprayed Al alloys
  77. Luminescence and temperature-sensing properties of Li+, Na+, or K+, Tm3+, and Yb3+ co-doped Bi2WO6 phosphors
  78. Effect of molybdenum tailings aggregate on mechanical properties of engineered cementitious composites and stirrup-confined ECC stub columns
  79. Experimental study on the seismic performance of short shear walls comprising cold-formed steel and high-strength reinforced concrete with concealed bracing
  80. Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete
  81. Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications
  82. UV aging behavior evolution characterization of HALS-modified asphalt based on micro-morphological features
  83. Preparation of VO2/graphene/SiC film by water vapor oxidation
  84. A semi-empirical model for predicting carbonation depth of RAC under two-dimensional conditions
  85. Comparison of the physical properties of different polyimide nanocomposite films containing organoclays varying in alkyl chain lengths
  86. Effects of freeze–thaw cycles on micro and meso-structural characteristics and mechanical properties of porous asphalt mixtures
  87. Flexural performance of a new type of slightly curved arc HRB400 steel bars reinforced one-way concrete slabs
  88. Alkali-activated binder based on red mud with class F fly ash and ground granulated blast-furnace slag under ambient temperature
  89. Facile synthesis of g-C3N4 nanosheets for effective degradation of organic pollutants via ball milling
  90. DEM study on the loading rate effect of marble under different confining pressures
  91. Conductive and self-cleaning composite membranes from corn husk nanofiber embedded with inorganic fillers (TiO2, CaO, and eggshell) by sol–gel and casting processes for smart membrane applications
  92. Laser re-melting of modified multimodal Cr3C2–NiCr coatings by HVOF: Effect on the microstructure and anticorrosion properties
  93. Damage constitutive model of jointed rock mass considering structural features and load effect
  94. Thermosetting polymer composites: Manufacturing and properties study
  95. CSG compressive strength prediction based on LSTM and interpretable machine learning
  96. Axial compression behavior and stress–strain relationship of slurry-wrapping treatment recycled aggregate concrete-filled steel tube short columns
  97. Space-time evolution characteristics of loaded gas-bearing coal fractures based on industrial μCT
  98. Dual-biprism-based single-camera high-speed 3D-digital image correlation for deformation measurement on sandwich structures under low velocity impact
  99. Effects of cold deformation modes on microstructure uniformity and mechanical properties of large 2219 Al–Cu alloy rings
  100. Basalt fiber as natural reinforcement to improve the performance of ecological grouting slurry for the conservation of earthen sites
  101. Interaction of micro-fluid structure in a pressure-driven duct flow with a nearby placed current-carrying wire: A numerical investigation
  102. A simulation modeling methodology considering random multiple shots for shot peening process
  103. Optimization and characterization of composite modified asphalt with pyrolytic carbon black and chicken feather fiber
  104. Synthesis, characterization, and application of the novel nanomagnet adsorbent for the removal of Cr(vi) ions
  105. Multi-perspective structural integrity-based computational investigations on airframe of Gyrodyne-configured multi-rotor UAV through coupled CFD and FEA approaches for various lightweight sandwich composites and alloys
  106. Influence of PVA fibers on the durability of cementitious composites under the wet–heat–salt coupling environment
  107. Compressive behavior of BFRP-confined ceramsite concrete: An experimental study and stress–strain model
  108. Interval models for uncertainty analysis and degradation prediction of the mechanical properties of rubber
  109. Preparation of PVDF-HFP/CB/Ni nanocomposite films for piezoelectric energy harvesting
  110. Frost resistance and life prediction of recycled brick aggregate concrete with waste polypropylene fiber
  111. Synthetic leathers as a possible source of chemicals and odorous substances in indoor environment
  112. Mechanical properties of seawater volcanic scoria aggregate concrete-filled circular GFRP and stainless steel tubes under axial compression
  113. Effect of curved anchor impellers on power consumption and hydrodynamic parameters of yield stress fluids (Bingham–Papanastasiou model) in stirred tanks
  114. All-dielectric tunable zero-refractive index metamaterials based on phase change materials
  115. Influence of ultrasonication time on the various properties of alkaline-treated mango seed waste filler reinforced PVA biocomposite
  116. Research on key casting process of high-grade CNC machine tool bed nodular cast iron
  117. Latest research progress of SiCp/Al composite for electronic packaging
  118. Special Issue on 3D and 4D Printing of Advanced Functional Materials - Part I
  119. Molecular dynamics simulation on electrohydrodynamic atomization: Stable dripping mode by pre-load voltage
  120. Research progress of metal-based additive manufacturing in medical implants
https://doi.org/10.1515/rams-2022-0310
Keywords for this article
steel fibers; ultra-high-performance concrete; mechanical properties; fiber; scientometric analysis
Creative Commons
BY 4.0

Articles in the same Issue

  1. Review Articles
  2. Progress in preparation and ablation resistance of ultra-high-temperature ceramics modified C/C composites for extreme environment
  3. Solar lighting systems applied in photocatalysis to treat pollutants – A review
  4. Technological advances in three-dimensional skin tissue engineering
  5. Hybrid magnesium matrix composites: A review of reinforcement philosophies, mechanical and tribological characteristics
  6. Application prospect of calcium peroxide nanoparticles in biomedical field
  7. Research progress on basalt fiber-based functionalized composites
  8. Evaluation of the properties and applications of FRP bars and anchors: A review
  9. A critical review on mechanical, durability, and microstructural properties of industrial by-product-based geopolymer composites
  10. Multifunctional engineered cementitious composites modified with nanomaterials and their applications: An overview
  11. Role of bioglass derivatives in tissue regeneration and repair: A review
  12. Research progress on properties of cement-based composites incorporating graphene oxide
  13. Properties of ultra-high performance concrete and conventional concrete with coal bottom ash as aggregate replacement and nanoadditives: A review
  14. A scientometric review of the literature on the incorporation of steel fibers in ultra-high-performance concrete with research mapping knowledge
  15. Weldability of high nitrogen steels: A review
  16. Application of waste recycle tire steel fibers as a construction material in concrete
  17. Wear properties of graphene-reinforced aluminium metal matrix composite: A review
  18. Experimental investigations of electrodeposited Zn–Ni, Zn–Co, and Ni–Cr–Co–based novel coatings on AA7075 substrate to ameliorate the mechanical, abrasion, morphological, and corrosion properties for automotive applications
  19. Research evolution on self-healing asphalt: A scientometric review for knowledge mapping
  20. Recent developments in the mechanical properties of hybrid fiber metal laminates in the automotive industry: A review
  21. A review of microscopic characterization and related properties of fiber-incorporated cement-based materials
  22. Comparison and review of classical and machine learning-based constitutive models for polymers used in aeronautical thermoplastic composites
  23. Gold nanoparticle-based strategies against SARS-CoV-2: A review
  24. Poly-ferric sulphate as superior coagulant: A review on preparation methods and properties
  25. A review on ceramic waste-based concrete: A step toward sustainable concrete
  26. Modification of the structure and properties of oxide layers on aluminium alloys: A review
  27. A review of magnetically driven swimming microrobots: Material selection, structure design, control method, and applications
  28. Polyimide–nickel nanocomposites fabrication, properties, and applications: A review
  29. Design and analysis of timber-concrete-based civil structures and its applications: A brief review
  30. Effect of fiber treatment on physical and mechanical properties of natural fiber-reinforced composites: A review
  31. Blending and functionalisation modification of 3D printed polylactic acid for fused deposition modeling
  32. A critical review on functionally graded ceramic materials for cutting tools: Current trends and future prospects
  33. Heme iron as potential iron fortifier for food application – characterization by material techniques
  34. An overview of the research trends on fiber-reinforced shotcrete for construction applications
  35. High-entropy alloys: A review of their performance as promising materials for hydrogen and molten salt storage
  36. Effect of the axial compression ratio on the seismic behavior of resilient concrete walls with concealed column stirrups
  37. Research Articles
  38. Effect of fiber orientation and elevated temperature on the mechanical properties of unidirectional continuous kenaf reinforced PLA composites
  39. Optimizing the ECAP processing parameters of pure Cu through experimental, finite element, and response surface approaches
  40. Study on the solidification property and mechanism of soft soil based on the industrial waste residue
  41. Preparation and photocatalytic degradation of Sulfamethoxazole by g-C3N4 nano composite samples
  42. Impact of thermal modification on color and chemical changes of African padauk, merbau, mahogany, and iroko wood species
  43. The evaluation of the mechanical properties of glass, kenaf, and honeycomb fiber-reinforced composite
  44. Evaluation of a novel steel box-soft body combination for bridge protection against ship collision
  45. Study on the uniaxial compression constitutive relationship of modified yellow mud from minority dwelling in western Sichuan, China
  46. Ultrasonic longitudinal torsion-assisted biotic bone drilling: An experimental study
  47. Green synthesis, characterizations, and antibacterial activity of silver nanoparticles from Themeda quadrivalvis, in conjugation with macrolide antibiotics against respiratory pathogens
  48. Performance analysis of WEDM during the machining of Inconel 690 miniature gear using RSM and ANN modeling approaches
  49. Biosynthesis of Ag/bentonite, ZnO/bentonite, and Ag/ZnO/bentonite nanocomposites by aqueous leaf extract of Hagenia abyssinica for antibacterial activities
  50. Eco-friendly MoS2/waste coconut oil nanofluid for machining of magnesium implants
  51. Silica and kaolin reinforced aluminum matrix composite for heat storage
  52. Optimal design of glazed hollow bead thermal insulation mortar containing fly ash and slag based on response surface methodology
  53. Hemp seed oil nanoemulsion with Sapindus saponins as a potential carrier for iron supplement and vitamin D
  54. A numerical study on thin film flow and heat transfer enhancement for copper nanoparticles dispersed in ethylene glycol
  55. Research on complex multimodal vibration characteristics of offshore platform
  56. Applicability of fractal models for characterising pore structure of hybrid basalt–polypropylene fibre-reinforced concrete
  57. Influence of sodium silicate to precursor ratio on mechanical properties and durability of the metakaolin/fly ash alkali-activated sustainable mortar using manufactured sand
  58. An experimental study of bending resistance of multi-size PFRC beams
  59. Characterization, biocompatibility, and optimization of electrospun SF/PCL composite nanofiber films
  60. Morphological classification method and data-driven estimation of the joint roughness coefficient by consideration of two-order asperity
  61. Prediction and simulation of mechanical properties of borophene-reinforced epoxy nanocomposites using molecular dynamics and FEA
  62. Nanoemulsions of essential oils stabilized with saponins exhibiting antibacterial and antioxidative properties
  63. Fabrication and performance analysis of sustainable municipal solid waste incineration fly ash alkali-activated acoustic barriers
  64. Electrostatic-spinning construction of HCNTs@Ti3C2T x MXenes hybrid aerogel microspheres for tunable microwave absorption
  65. Investigation of the mechanical properties, surface quality, and energy efficiency of a fused filament fabrication for PA6
  66. Experimental study on mechanical properties of coal gangue base geopolymer recycled aggregate concrete reinforced by steel fiber and nano-Al2O3
  67. Hybrid bio-fiber/bio-ceramic composite materials: Mechanical performance, thermal stability, and morphological analysis
  68. Experimental study on recycled steel fiber-reinforced concrete under repeated impact
  69. Effect of rare earth Nd on the microstructural transformation and mechanical properties of 7xxx series aluminum alloys
  70. Color match evaluation using instrumental method for three single-shade resin composites before and after in-office bleaching
  71. Exploring temperature-resilient recycled aggregate concrete with waste rubber: An experimental and multi-objective optimization analysis
  72. Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics
  73. Evolution of the pore structure of pumice aggregate concrete and the effect on compressive strength
  74. Effect of alkaline treatment time of fibers and microcrystalline cellulose addition on mechanical properties of unsaturated polyester composites reinforced by cantala fibers
  75. Optimization of eggshell particles to produce eco-friendly green fillers with bamboo reinforcement in organic friction materials
  76. An effective approach to improve microstructure and tribological properties of cold sprayed Al alloys
  77. Luminescence and temperature-sensing properties of Li+, Na+, or K+, Tm3+, and Yb3+ co-doped Bi2WO6 phosphors
  78. Effect of molybdenum tailings aggregate on mechanical properties of engineered cementitious composites and stirrup-confined ECC stub columns
  79. Experimental study on the seismic performance of short shear walls comprising cold-formed steel and high-strength reinforced concrete with concealed bracing
  80. Failure criteria and microstructure evolution mechanism of the alkali–silica reaction of concrete
  81. Mechanical, fracture-deformation, and tribology behavior of fillers-reinforced sisal fiber composites for lightweight automotive applications
  82. UV aging behavior evolution characterization of HALS-modified asphalt based on micro-morphological features
  83. Preparation of VO2/graphene/SiC film by water vapor oxidation
  84. A semi-empirical model for predicting carbonation depth of RAC under two-dimensional conditions
  85. Comparison of the physical properties of different polyimide nanocomposite films containing organoclays varying in alkyl chain lengths
  86. Effects of freeze–thaw cycles on micro and meso-structural characteristics and mechanical properties of porous asphalt mixtures
  87. Flexural performance of a new type of slightly curved arc HRB400 steel bars reinforced one-way concrete slabs
  88. Alkali-activated binder based on red mud with class F fly ash and ground granulated blast-furnace slag under ambient temperature
  89. Facile synthesis of g-C3N4 nanosheets for effective degradation of organic pollutants via ball milling
  90. DEM study on the loading rate effect of marble under different confining pressures
  91. Conductive and self-cleaning composite membranes from corn husk nanofiber embedded with inorganic fillers (TiO2, CaO, and eggshell) by sol–gel and casting processes for smart membrane applications
  92. Laser re-melting of modified multimodal Cr3C2–NiCr coatings by HVOF: Effect on the microstructure and anticorrosion properties
  93. Damage constitutive model of jointed rock mass considering structural features and load effect
  94. Thermosetting polymer composites: Manufacturing and properties study
  95. CSG compressive strength prediction based on LSTM and interpretable machine learning
  96. Axial compression behavior and stress–strain relationship of slurry-wrapping treatment recycled aggregate concrete-filled steel tube short columns
  97. Space-time evolution characteristics of loaded gas-bearing coal fractures based on industrial μCT
  98. Dual-biprism-based single-camera high-speed 3D-digital image correlation for deformation measurement on sandwich structures under low velocity impact
  99. Effects of cold deformation modes on microstructure uniformity and mechanical properties of large 2219 Al–Cu alloy rings
  100. Basalt fiber as natural reinforcement to improve the performance of ecological grouting slurry for the conservation of earthen sites
  101. Interaction of micro-fluid structure in a pressure-driven duct flow with a nearby placed current-carrying wire: A numerical investigation
  102. A simulation modeling methodology considering random multiple shots for shot peening process
  103. Optimization and characterization of composite modified asphalt with pyrolytic carbon black and chicken feather fiber
  104. Synthesis, characterization, and application of the novel nanomagnet adsorbent for the removal of Cr(vi) ions
  105. Multi-perspective structural integrity-based computational investigations on airframe of Gyrodyne-configured multi-rotor UAV through coupled CFD and FEA approaches for various lightweight sandwich composites and alloys
  106. Influence of PVA fibers on the durability of cementitious composites under the wet–heat–salt coupling environment
  107. Compressive behavior of BFRP-confined ceramsite concrete: An experimental study and stress–strain model
  108. Interval models for uncertainty analysis and degradation prediction of the mechanical properties of rubber
  109. Preparation of PVDF-HFP/CB/Ni nanocomposite films for piezoelectric energy harvesting
  110. Frost resistance and life prediction of recycled brick aggregate concrete with waste polypropylene fiber
  111. Synthetic leathers as a possible source of chemicals and odorous substances in indoor environment
  112. Mechanical properties of seawater volcanic scoria aggregate concrete-filled circular GFRP and stainless steel tubes under axial compression
  113. Effect of curved anchor impellers on power consumption and hydrodynamic parameters of yield stress fluids (Bingham–Papanastasiou model) in stirred tanks
  114. All-dielectric tunable zero-refractive index metamaterials based on phase change materials
  115. Influence of ultrasonication time on the various properties of alkaline-treated mango seed waste filler reinforced PVA biocomposite
  116. Research on key casting process of high-grade CNC machine tool bed nodular cast iron
  117. Latest research progress of SiCp/Al composite for electronic packaging
  118. Special Issue on 3D and 4D Printing of Advanced Functional Materials - Part I
  119. Molecular dynamics simulation on electrohydrodynamic atomization: Stable dripping mode by pre-load voltage
  120. Research progress of metal-based additive manufacturing in medical implants
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 26.10.2025 from https://www.degruyterbrill.com/document/doi/10.1515/rams-2022-0310/html?lang=en&srsltid=AfmBOopKb9beiHfL7U2JXBtSAK92Jo5q9CEhUxkjCHF_xjrLzUdvUzIM
Scroll to top button