Car braking effectiveness after adaptation for drivers with motor dysfunctions

Articles in the same Issue

1. Regular Articles
2. Electrochemical studies of the synergistic combination effect of thymus mastichina and illicium verum essential oil extracts on the corrosion inhibition of low carbon steel in dilute acid solution
3. Adoption of Business Intelligence to Support Cost Accounting Based Financial Systems — Case Study of XYZ Company
4. Techno-Economic Feasibility Analysis of a Hybrid Renewable Energy Supply Options for University Buildings in Saudi Arabia
5. Optimized design of a semimetal gasket operating in flange-bolted joints
6. Behavior of non-reinforced and reinforced green mortar with fibers
7. Field measurement of contact forces on rollers for a large diameter pipe conveyor
8. Development of Smartphone-Controlled Hand and Arm Exoskeleton for Persons with Disability
9. Investigation of saturation flow rate using video camera at signalized intersections in Jordan
10. The features of Ni₂MnIn polycrystalline Heusler alloy thin films formation by pulsed laser deposition
11. Selection of a workpiece clamping system for computer-aided subtractive manufacturing of geometrically complex medical models
12. Development of Solar-Powered Water Pump with 3D Printed Impeller
13. Identifying Innovative Reliable Criteria Governing the Selection of Infrastructures Construction Project Delivery Systems
14. Kinetics of Carbothermal Reduction Process of Different Size Phosphate Rocks
15. Plastic forming processes of transverse non-homogeneous composite metallic sheets
16. Accelerated aging of WPCs Based on Polypropylene and Birch plywood Sanding Dust
17. Effect of water flow and depth on fatigue crack growth rate of underwater wet welded low carbon steel SS400
18. Non-invasive attempts to extinguish flames with the use of high-power acoustic extinguisher
19. Filament wound composite fatigue mechanisms investigated with full field DIC strain monitoring
20. Structural Timber In Compartment Fires – The Timber Charring and Heat Storage Model
21. Technical and economic aspects of starting a selected power unit at low ambient temperatures
22. Car braking effectiveness after adaptation for drivers with motor dysfunctions
23. Adaptation to driver-assistance systems depending on experience
24. A SIMULINK implementation of a vector shift relay with distributed synchronous generator for engineering classes
25. Evaluation of measurement uncertainty in a static tensile test
26. Errors in documenting the subsoil and their impact on the investment implementation: Case study
27. Comparison between two calculation methods for designing a stand-alone PV system according to Mosul city basemap
28. Reduction of transport-related air pollution. A case study based on the impact of the COVID-19 pandemic on the level of NO_x emissions in the city of Krakow
29. Driver intervention performance assessment as a key aspect of L3–L4 automated vehicles deployment
30. A new method for solving quadratic fractional programming problem in neutrosophic environment
31. Effect of fish scales on fabrication of polyester composite material reinforcements
32. Impact of the operation of LNG trucks on the environment
33. The effectiveness of the AEB system in the context of the safety of vulnerable road users
34. Errors in controlling cars cause tragic accidents involving motorcyclists
35. Deformation of designed steel plates: An optimisation of the side hull structure using the finite element approach
36. Thermal-strength analysis of a cross-flow heat exchanger and its design improvement
37. Effect of thermal collector configuration on the photovoltaic heat transfer performance with 3D CFD modeling
38. Experimental identification of the subjective reception of external stimuli during wheelchair driving
39. Failure analysis of motorcycle shock breakers
40. Experimental analysis of nonlinear characteristics of absorbers with wire rope isolators
41. Experimental tests of the antiresonance vibratory mill of a sectional movement trajectory
42. Experimental and theoretical investigation of CVT rubber belt vibrations
43. Is the cubic parabola really the best railway transition curve?
44. Transport properties of the new vibratory conveyor at operations in the resonance zone
45. Assessment of resistance to permanent deformations of asphalt mixes of low air void content
46. COVID-19 lockdown impact on CERN seismic station ambient noise levels
47. Review Articles
48. FMEA method in operational reliability of forest harvesters
49. Examination of preferences in the field of mobility of the city of Pila in terms of services provided by the Municipal Transport Company in Pila
50. Enhancement stability and color fastness of natural dye: A review
51. Special Issue: ICE-SEAM 2019 - Part II
52. Lane Departure Warning Estimation Using Yaw Acceleration
53. Analysis of EMG Signals during Stance and Swing Phases for Controlling Magnetorheological Brake applications
54. Sensor Number Optimization Using Neural Network for Ankle Foot Orthosis Equipped with Magnetorheological Brake
55. Special Issue: Recent Advances in Civil Engineering - Part II
56. Comparison of STM’s reliability system on the example of selected element
57. Technical analysis of the renovation works of the wooden palace floors
58. Special Issue: TRANSPORT 2020
59. Simulation assessment of the half-power bandwidth method in testing shock absorbers
60. Predictive analysis of the impact of the time of day on road accidents in Poland
61. User’s determination of a proper method for quantifying fuel consumption of a passenger car with compression ignition engine in specific operation conditions
62. Analysis and assessment of defectiveness of regulations for the yellow signal at the intersection
63. Streamlining possibility of transport-supply logistics when using chosen Operations Research techniques
64. Permissible distance – safety system of vehicles in use
65. Study of the population in terms of knowledge about the distance between vehicles in motion
66. UAVs in rail damage image diagnostics supported by deep-learning networks
67. Exhaust emissions of buses LNG and Diesel in RDE tests
68. Measurements of urban traffic parameters before and after road reconstruction
69. The use of deep recurrent neural networks to predict performance of photovoltaic system for charging electric vehicles
70. Analysis of dangers in the operation of city buses at the intersections
71. Psychological factors of the transfer of control in an automated vehicle
72. Testing and evaluation of cold-start emissions from a gasoline engine in RDE test at two different ambient temperatures
73. Age and experience in driving a vehicle and psychomotor skills in the context of automation
74. Consumption of gasoline in vehicles equipped with an LPG retrofit system in real driving conditions
75. Laboratory studies of the influence of the working position of the passenger vehicle air suspension on the vibration comfort of children transported in the child restraint system
76. Route optimization for city cleaning vehicle
77. Efficiency of electric vehicle interior heating systems at low ambient temperatures
78. Model-based imputation of sound level data at thoroughfare using computational intelligence
79. Research on the combustion process in the Fiat 1.3 Multijet engine fueled with rapeseed methyl esters
80. Overview of the method and state of hydrogenization of road transport in the world and the resulting development prospects in Poland
81. Tribological characteristics of polymer materials used for slide bearings
82. Car reliability analysis based on periodic technical tests
83. Special Issue: Terotechnology 2019 - Part II
84. DOE Application for Analysis of Tribological Properties of the Al₂O₃/IF-WS₂ Surface Layers
85. The effect of the impurities spaces on the quality of structural steel working at variable loads
86. Prediction of the parameters and the hot open die elongation forging process on an 80 MN hydraulic press
87. Special Issue: AEVEC 2020
88. Vocational Student's Attitude and Response Towards Experiential Learning in Mechanical Engineering
89. Virtual Laboratory to Support a Practical Learning of Micro Power Generation in Indonesian Vocational High Schools
90. The impacts of mediating the work environment on the mode choice in work trips
91. Utilization of K-nearest neighbor algorithm for classification of white blood cells in AML M4, M5, and M7
92. Car braking effectiveness after adaptation for drivers with motor dysfunctions
93. Case study: Vocational student’s knowledge and awareness level toward renewable energy in Indonesia
94. Contribution of collaborative skill toward construction drawing skill for developing vocational course
95. Special Issue: Annual Engineering and Vocational Education Conference - Part II
96. Vocational teachers’ perspective toward Technological Pedagogical Vocational Knowledge
97. Special Issue: ICIMECE 2020 - Part I
98. Profile of system and product certification as quality infrastructure in Indonesia
99. Prediction Model of Magnetorheological (MR) Fluid Damper Hysteresis Loop using Extreme Learning Machine Algorithm
100. A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters
101. Facile rheological route method for LiFePO₄/C cathode material production
102. Mosque design strategy for energy and water saving
103. Epoxy resins thermosetting for mechanical engineering
104. Estimating the potential of wind energy resources using Weibull parameters: A case study of the coastline region of Dar es Salaam, Tanzania
105. Special Issue: CIRMARE 2020
106. New trends in visual inspection of buildings and structures: Study for the use of drones
107. Special Issue: ISERT 2021
108. Alleviate the contending issues in network operating system courses: Psychomotor and troubleshooting skill development with Raspberry Pi
109. Special Issue: Actual Trends in Logistics and Industrial Engineering - Part II
110. The Physical Internet: A means towards achieving global logistics sustainability
111. Special Issue: Modern Scientific Problems in Civil Engineering - Part I
112. Construction work cost and duration analysis with the use of agent-based modelling and simulation
113. Corrosion rate measurement for steel sheets of a fuel tank shell being in service
114. The influence of external environment on workers on scaffolding illustrated by UTCI
115. Allocation of risk factors for geodetic tasks in construction schedules
116. Pedestrian fatality risk as a function of tram impact speed
117. Technological and organizational problems in the construction of the radiation shielding concrete and suggestions to solve: A case study
118. Finite element analysis of train speed effect on dynamic response of steel bridge
119. New approach to analysis of railway track dynamics – Rail head vibrations
120. Special Issue: Trends in Logistics and Production for the 21st Century - Part I
121. Design of production lines and logistic flows in production
122. The planning process of transport tasks for autonomous vans
123. Modeling of the two shuttle box system within the internal logistics system using simulation software
124. Implementation of the logistics train in the intralogistics system: A case study
125. Assessment of investment in electric buses: A case study of a public transport company
126. Assessment of a robot base production using CAM programming for the FANUC control system
127. Proposal for the flow of material and adjustments to the storage system of an external service provider
128. The use of numerical analysis of the injection process to select the material for the injection molding
129. Economic aspect of combined transport
130. Solution of a production process with the application of simulation: A case study
131. Speedometer reliability in regard to road traffic sustainability
132. Design and construction of a scanning stand for the PU mini-acoustic sensor
133. Utilization of intelligent vehicle units for train set dispatching
134. Special Issue: ICRTEEC - 2021 - Part I
135. LVRT enhancement of DFIG-driven wind system using feed-forward neuro-sliding mode control
136. Special Issue: Automation in Finland 2021 - Part I
137. Prediction of future paths of mobile objects using path library
138. Model predictive control for a multiple injection combustion model
139. Model-based on-board post-injection control development for marine diesel engine
140. Intelligent temporal analysis of coronavirus statistical data