Home Multiple wide band gaps in a convex-like holey phononic crystal strip
Article Open Access

Multiple wide band gaps in a convex-like holey phononic crystal strip

  • Jun Jin , Shan Jiang EMAIL logo and Hongping Hu
Published/Copyright: March 3, 2022
Download Article (PDF)
Become an author with De Gruyter Brill
Submit Manuscript Author Information
REVIEWS ON ADVANCED MATERIALS SCIENCE
From the journal REVIEWS ON ADVANCED MATERIALS SCIENCE Volume 61 Issue 1

Abstract

A convex-like one-dimensional holey phononic crystal (PnC) strip with multiple wide band gaps but simple construction is investigated. By dint of the unique folding topology constituted by deformable L-shaped connectors and rigid lumps, the wide band gaps can exist with a compact spatial size. Moreover, the geometrical parameters are tunable in a large range. A maximum band gap of up to 63% is achievable. These salient merits outweigh the already published counterparts, enabling the proposed PnC strip to be a more promising candidate for engineering applications. Therefore, we are convinced that such a folding strategy of unit cells provides a practicable direction for the further structural design of PnC devices.

Keywords: phononic crystal strip; band gap; L-shaped connectors; folding strategy

1 Introduction

Phononic crystals (PnCs) that can alter the propagation of acoustic/elastic waves have attracted great attention [1,2,3,4]. The reported fascinating applications include waveguide [5,6,7], sound/vibration isolation and cloaking [8,9,10], acoustic subwavelength imaging [11], acoustic-optic coupling [12,13], etc. By now, abundant PnCs have been considered in the literature, with different mechanisms [14,15,16], 1D-to-3D periodicity [17,18], and various topologies [19,20]. Many effective methods have been introduced into the design of PnCs like popular topology optimization [19,20,21]. However, it is still a salient issue how to establish topologies to meet practical application demands. For example, PnCs can be designed as the supporting beams or the substrate of MEMS to alleviate or isolate elastic waves (MHz) induced by noise interference from the workplace or energy loss via supports and anchors [22,23]. Yet, the highly integrated MEMS imposed strict limits on the compatibility between band gaps and volume. On the other hand, because of technological constraints and costs when going to the microscale, robustness and machinability should be considered to avoid complex and impractical topologies.

One-dimensional (1D) PnC strips can save more space than their two-dimensional (2D) and three-dimensional (3D) counterparts, making them more suitable for low-space applications like MEMS. Moreover, because of their simplicity in both geometry structure and band structure, the 1D PnC strips are ideal carriers to verify new physical phenomena [24,25,26], new computational methods [27,28,29], and new materials [30,31]. Generally, according to the structural characteristics, 1D PnC strips can be divided into two types: holey PnC strips [24,32,33,34,35,36,37,38] and pillared PnC strips [39,40,41,42,43,44,45,46,47]. Comparatively, pillared PnC strips are more likely to induce wide band gaps and undoubtedly get more spotlight. Nevertheless, tall, heavy and hard pillars are always indispensable to provide strong local resonance for the generation of large band gaps. It has been revealed that a large band gap exists only when the ratio of the pillar height to substrate thickness reaches about 10 [39]. Even worse, the numerous pillars and layers of two different materials brought challenges in terms of space, fabrication, and stability. Referring to the holey PnC strips, nucleation of band gaps mainly relies on the Bragg scattering mechanism, which requires the geometry sizes to becommensurate with the wavelength. Thus, conventional holey PnC strips can hardly open large band gaps while keeping a small size, which greatly confines their applications. Up to now, many imaginative PnC strips have been proposed for cutting-edge physical research, but only a few can reconcile the theoretical properties and practicability.

In this paper, we propose an original convex-like 1D holey PnC strip. In a unit cell, four lumps are centrifugally connected by four L-shaped connectors. Unlike the conventional holey strips, the L-shaped connectors set up a folding topology, which elongates the wave propagation path but remains a compact geometry. Thorough research on band gaps has been conducted. The results are exactly what we expect: multiple wide band gaps exist in such a simple constitution while keeping a small size, with a large tunable range of geometrical parameters. All these traits are beneficial to improve feasibility, applicability, and reliability, making the proposed PnC strip a potential candidate for low-space applications. Finally, transmission spectra have been calculated to evaluate its ability in suppressing vibration.

The rest of this paper is arranged as follows. First, the geometrical constitution, theoretical basis, and main metrics are presented in Section 2. Second, the band structures and underlying mechanisms, the relationship between band gaps and geometrical parameters, and transmission spectra are discussed in Section 3. Finally, some conclusions are drawn in Section 4.

2 PnC strip model and theoretical basis

Here, we intended to reveal the essential traits of the proposed PnC, thus normalized parameters are applied throughout the theoretical analysis and numerical computation. With the benefits of normalization, the discussion is nearly geometry, material, and frequency agnostic instead of being confined to specific geometrical parameters, particular materials, and limited frequency ranges. Such treatment is widely used in theoretical analysis and numerical computation to capture the key issues. Furthermore, one can also conveniently determine geometrical and material parameters according to the actual requirements.

Figure 1 shows the sketch of the proposed holey PnC strip, in which a unit cell consists of four bulky lumps and four slender L-shaped connectors. The structure can be determined by four independent geometrical parameters (b, c, d or other derivatives, and h). In the following discussion, these parameters are substituted by dimensionless variables, namely, be normalized against the lattice constant a (set as 1 unit size).

Figure 1 Sketch of the convex-like holey PnC strip with a unique folding topology provided by the constitution of bulky lumps and slender L-shaped connectors.
Figure 1

Sketch of the convex-like holey PnC strip with a unique folding topology provided by the constitution of bulky lumps and slender L-shaped connectors.

The fundamental motion equation of elastic waves can be expressed by

(1) ∂ ∂ x j c i j k l ∂ u k ∂ x l + ρ ω 2 u i = 0 , ( i , j , k , l = 1 , 2 , 3 ) ,

where c ijkl is the elastic tensor, x j (j = 1, 2, 3) represent the coordinates x, y, and z, respectively, u i is the displacement, and ω denotes the circular frequency.

According to the Bloch theorem, the displacements must satisfy the following form:

(2) u ( r ) = e − i k ⋅ r u ˜ ( r ) ,

where k is the Bloch wave vector, r is the position vector, and u ˜ is a periodical function with the same periodicity as the crystal lattice.

The involving calculations of band structures, essentially eigenvalues of partial differential equations, are implemented using commercial software COMSOL. The Bloch theorem is realized by applying Floquet periodic boundary conditions on the boundaries of a unit cell along with the corresponding directions. Dispersion relations can be obtained by sweeping the wave vector k along the edges of the first irreducible Brillouin zone. Since the topology includes four independent geometrical parameters, COMSOL modeling has been transformed into MATLAB script to perform the nested loops, significantly improving the computing efficiency.

The kinetic energetic ratio describing the polarization of elastic waves is defined as

(3) e i = ∫ V u i 2 d V / ∫ V ( u x 2 + u y 2 + u z 2 ) d V , i = x , y , z ,

where V is the volume. In the following discussion, this kind of information is helpful to understand the nucleation of the band gap. Moreover, it is also very important for the 1D PnC strip since it is sensitive to the polarization of elastic waves.

As the most important metric to evaluate the performance of PnCs, the band gaps are measured by a dimensionless parameter, viz., the ratio between the width and center frequency. BG% = 2(f top − f bot)/(f top + f bot), where f bot and f top are the edges of band gaps. Generally, a higher BG% value is preferable.

3 Results and discussion

3.1 Band structures

Figure 2 shows the band structure of the proposed PnC strip with geometrical parameters (b/a, c/a, d/a, h/a) = (0.82, 0.22, 0.65, 0.15), in which the normalized wavenumber (ka/2π) and normalized frequency (ωa/2πc t ) are applied to abstract the dispersion relations. As the definition stated, the band structure is material and lattice constant a agnostic, and only depends on the combination of (b/a, c/a, d/a, h/a). The chosen material for numerical examples in this work is single crystal silicon. Its material parameters are the mass density ρ = 2320 kg·m−3, the elastic constants c 11 = 165.7 GPa, c 12 = 64.1 GPa and c 44 = 79.6 GPa, and transverse and longitudinal speeds c t = 5,840 m·s−1 and c l = 8,433 m·s−1, respectively. The y and x coordinates of the strip are consistent with the [010] direction of a (100)-oriented silicon wafer.

Figure 2 (a) Band structure of the convex-like holey PnC strip with geometrical parameters (b/a, c/a, d/a, h/a) = (0.82, 0.22, 0.65, 0.15). Color denotes the kinetic energetic ratio e i (i = x, y, z), describing the polarization of elastic waves. (a–c) correspond to x, y, and z polarizations respectively. (d–w) Identified eigenmodes corresponding to the bands in the band structure.
Figure 2

(a) Band structure of the convex-like holey PnC strip with geometrical parameters (b/a, c/a, d/a, h/a) = (0.82, 0.22, 0.65, 0.15). Color denotes the kinetic energetic ratio e i (i = x, y, z), describing the polarization of elastic waves. (a–c) correspond to x, y, and z polarizations respectively. (d–w) Identified eigenmodes corresponding to the bands in the band structure.

The band structure has been repeated three times with different kinetic energetic ratios e i (i = x, y, z), which is embodied by color. In virtue of such information, one can easily distinguish the polarization belonging of each band. At a glance, three band gaps are visible, whose normalized frequency spans are 0.173–0.220, 0.310–0.340, and 0.342–0.550, corresponding to BG% of 24%, 9.2%, and 47%, respectively. The latter two band gaps are separated by a quasi-flat band, and its group velocity is close to zero.

To understand the nucleating mechanisms of band gaps, the eigenmodes of the first 20 bands at ka/2π = 0.25 are also demonstrated in Figure 2 (d–w). Γ and X at the ends are equal to 0 and 0.5, respectively. Four basic bands are starting from ω = 0 in the 1D PnC strip, which can be further classified as four different types: the x-bending mode (B x0), y-bending mode (B y0), z-bending mode (Bz0), and torsional mode (T0). The other bands are higher-order derivatives of these four basic modes. For simplifying the discussion, these modes can be further divided into in-plane modes (including B x - and B y -modes) and out-of-plane modes (including B z - and T-modes). Each band in the band structure is labeled. By comparing the boundary eigenmodes of band gaps, it can be concluded that the mismatch of the displacement distribution between the consecutive bands forms a band gap. A steeper mismatch is conducive to inducing a larger band gap.

Basically, band gaps of the holey PnCs are mainly induced by the Bragg scattering mechanism, which stipulates the proportionality between the geometrical size and wavelength. In other words, it is challenging to open a large band gap with a small size. Unlike the conventional holey structures, the unique folding topology in this work enables the elongation of propagating path while remaining a limited size. It is effective to circumvent the limitation of Bragg band gaps on geometrical dimensions. On the other hand, in the eigenmodes, especially in the bending modes, the lumps act as rigid bodies while L-shaped connectors act as deformable bodies. The big difference in bending stiffness can also sustain the local resonance mechanism. Specifically, the large mismatch of localized vibration energy in distinct resonant modes can also enhance the reflectivity of waves. Based on the above analysis, we deduce that the nucleation of the multiple wide band gaps roots in the combination of Bragg scattering mechanism and local resonance mechanism.

L-Shaped connectors play an important role in the high-performance band gaps. As for the mechanical behaviors of L-shaped connectors, refs [48,49] give an in-depth theoretical analysis. In a nutshell, the behaviors of L-shaped structures include axial motion, in-plane bending, out-of-plane bending, and torsional motion. Both theoretical equations and numerical analysis confirm that these motions can be well decoupled into in-plane and out-of-plane motions, which is in good consistency with the classification of eigenmodes in Figure 2. For the in-plane modes (B x - and B y -modes), the motion of the L-shaped connectors is a coupling of axial extension and in-plane bending. As for the out-of-plane modes (B z - and T-modes), the motion of the L-shaped connectors is a coupling of out-of-plane bending and torsional motion.

3.2 Comparison with counterparts

To illustrate the advantages of the proposed PnC strip, a comparison of the band structures with three previously published strips is shown in Figure 3, including I-like strip [32], improved I-like strip [33], and cross-like strip [34]. The chosen material and computational method are identical. Color uniformly represents the kinetic energy ratio e z . By contrast, Figure 3 reveals some interesting regularities. First, although Figure 4(a) and (b) are similar I-like strips, the band gap of improved I-like strip from hexagonal lattice is much wider and lower than the standard counterpart from a square lattice. Second, the strips in Figure 3(c) and (d) have much more additional free boundaries than those in Figure 3(a) and (b), which is helpful to arouse the low-frequency wave modes. Third, the thicknesses in Figure 3(c) and (d) are only h/a = 0.2 and h/a = 0.15, whereas much larger h/a = 0.75 and h/a = 0.43 in Figure 3(a) and (b). Finally, Figure 3(d) has advantages of multiple broad band gaps, lower frequency band gap, and a much smaller size than the previous PnC strips.

Figure 3 Comparison on band structures of (a) I-like strip with (r/a, h/a) = (0.36, 0.75), (b) improved I-like strip with (a/d, r/d, h/d) = (31/2, 0.45, 0.75), (c) cross-like strip with (b/a, c/a, d/a, h/a) = (0.625, 0.25, 0.65, 0.2), and (d) the proposed convex-like PnC strip with (b/a, c/a, d/a, h/a) = (0.82, 0.22, 0.65, 0.15).
Figure 3

Comparison on band structures of (a) I-like strip with (r/a, h/a) = (0.36, 0.75), (b) improved I-like strip with (a/d, r/d, h/d) = (31/2, 0.45, 0.75), (c) cross-like strip with (b/a, c/a, d/a, h/a) = (0.625, 0.25, 0.65, 0.2), and (d) the proposed convex-like PnC strip with (b/a, c/a, d/a, h/a) = (0.82, 0.22, 0.65, 0.15).

Figure 4 The combined effect of in-plane geometrical parameters (b/a, c/a, and w/a) on band gaps, where BG% is represented by color. Out-of-plane geometrical parameter h/a = 0.15. (b) Ten slices extracted from (a), each slice demonstrates the influence of b/a and c/a on the band gaps for a given w/a.
Figure 4

The combined effect of in-plane geometrical parameters (b/a, c/a, and w/a) on band gaps, where BG% is represented by color. Out-of-plane geometrical parameter h/a = 0.15. (b) Ten slices extracted from (a), each slice demonstrates the influence of b/a and c/a on the band gaps for a given w/a.

3.3 Geometrical optimization for largest band gaps

Then, geometrical optimization aiming to probe the largest value of BG% has been conducted. In general, the topology involving multiple geometrical parameters is preferable, which can offer more possibilities to tune band gaps. In the proposed convex-like PnC strip, four independent parameters need to be considered. Here, we use a combination of b, c, w, and h, where w = a − 2t. The reason to choose w rather than others is that we want to vary the crucial width of L-shaped connectors t gradually smaller and make this variation accord with the positive direction of the z-axis (gradually larger). Moreover, these four geometrical parameters are further categorized as in-plane (b, c, and w) and out-of-plane parameters (thickness h). The out-of-plane parameter can only influence the out-of-plane modes (B z - and T-modes), while the in-plane parameters can affect all modes significantly. As a result, the best strategy to make the band gaps as wide as possible is to prevent the out-of-plane modes from splitting the band gaps or minimize the effect if the interference is inevitable. Specifically, the effect of the in-plane parameters (b, c, and w) is considered first by the nested loop to adjust the overall band structure, and then the out-of-plane parameter h is varied to relocate the special bands.

The joint effect of b/a, c/a, and w/a on band gaps are integrated into Figure 4(a), in which BG% is shown by color. The out-of-plane parameter h/a fixes at 0.15 during the iterative calculation. One can easily have an insight into the influence of each parameter and then their optimal combinations. Furthermore, ten slices along the parameter w/a extracted from Figure 4(a) are shown in Figure 4(b), each slice demonstrates the dependence of band gaps on b/a and c/a for a given w/a, by which one can understand the variation tendency quantitatively and intuitively. From Figure 4(a), the first and perhaps most remarkable feature is that wide band gaps exist with a broad tunable range of parameters. Two big red kernels denoting the broad band gaps (BG% ≥ 35%) can be reached in two large regions. More specifically in Figure 4(b), with the increase of w/a from 0.86 to 0.95, the BG% of the first kernel peaks at intermediate values and then decreases gradually until vanishing. However, for another one, kernel forms and spreads, and BG% increases accordingly with the increase of w/a. The widest band gap obtained has BG% = 47%.

Next, Figure 5 gives the effect of the out-of-plane parameter h/a on band gaps, under different w/a values. The blue left y-axis shows the position of band gaps, and the red right y-axis is the maximum BG%. While w/a varies from 0.87 to 0.95, the chosen b/a and c/a are optimum values corresponding to each w/a attained from Figure 4. It should be mentioned that the ranges of vertical axes are different. The variation trends of band gaps in Figure 5 echo the features manifested by Figure 4. Obviously, the band structure has a sudden change when w/a varies from 0.92 to 0.93, which can be attributed to the different nucleating ways of band gaps. It corresponds to the two red kernels in Figure 4. The optimum h/a remains constant at 0.15 when w/a ≤0.92. However, the optimum h/a moves to about 0.4 when w/a > 0.92.

Figure 5 Variation of band gaps versus the out-of-plane geometrical parameter h/a, where w/a varies from 0.87 to 0.95. b/a and c/a are optimum values corresponding to each w/a attained from Figure 4. The blue left y-axis and red right y-axis represent the position of band gaps and the corresponding maximum BG%, respectively. (a) w/a = 0.87, (b) w/a = 0.88, (c) w/a = 0.89, (d) w/a = 0.90, (e) w/a = 0.91, (f) w/a = 0.92, (g) w/a = 0.93, (h) w/a = 0.94, and (i) w/a = 0.95.
Figure 5

Variation of band gaps versus the out-of-plane geometrical parameter h/a, where w/a varies from 0.87 to 0.95. b/a and c/a are optimum values corresponding to each w/a attained from Figure 4. The blue left y-axis and red right y-axis represent the position of band gaps and the corresponding maximum BG%, respectively. (a) w/a = 0.87, (b) w/a = 0.88, (c) w/a = 0.89, (d) w/a = 0.90, (e) w/a = 0.91, (f) w/a = 0.92, (g) w/a = 0.93, (h) w/a = 0.94, and (i) w/a = 0.95.

As a supplement, to present the effect of h/a more vividly, the variation of band structure has also been directly illustrated in Figure 6. Evidently, when the value of h/a ≤ 0.4, the thickness h just affects B z -modes and T-modes. It further verifies the earlier discussion. The reason for this is because the parameter h has a monotonic relationship with both the z-bending stiffness and torsion stiffness, but is tangential to the in-plane bending stiffness.

Figure 6 Effect of h/a on the band structure with (b/a, c/a, d/a) = (0.82, 0.22, 0.65). Color denotes the kinetic energy ratio e z . (a) h/a = 0.10; (b) h/a = 0.15; (c) h/a = 0.20; (d) h/a = 0.30; and (e) h/a = 0.40.
Figure 6

Effect of h/a on the band structure with (b/a, c/a, d/a) = (0.82, 0.22, 0.65). Color denotes the kinetic energy ratio e z . (a) h/a = 0.10; (b) h/a = 0.15; (c) h/a = 0.20; (d) h/a = 0.30; and (e) h/a = 0.40.

The combination of Figures 4 and 5 provides the maximum of BG% and the corresponding optimal parameters. In other words, a thorough investigation based on geometrical optimization has been implemented. Among these geometrical parameters, the width of L-shaped connectors t is worth special attention since it is the smallest feature size limiting the fabrication and it is crucial on the lump-connector system. Table 1 summarizes the effect of t/a on the largest BG% and the supporting parameters. The largest BG% can be obtained when t/a is close to the limit, but considering the possible manufacturing inaccuracy and fabrication limitations, it is better not to keep the t/a too small.

Table 1

The effect of t/a on the largest BG% and the supporting parameters

t/a f top f bot BG% (b/a, c/a, d/a) h/a
0.070 0.566 0.356 45.49 (0.82, 0.22, 0.64) 0.15
0.065 0.550 0.342 46.63 (0.82, 0.22, 0.65) 0.15
0.060 0.522 0.325 46.37 (0.82, 0.20, 0.68) 0.15
0.055 0.492 0.311 44.93 (0.80, 0.18, 0.71) 0.15
0.050 0.449 0.288 43.47 (0.78, 0.14, 0.76) 0.15
0.045 0.434 0.286 41.24 (0.76, 0.14, 0.77) 0.15
0.040 0.286 0.407 35,17 (0.72, 0.12, 0.80) 0.15
0.035 0.550 0.951 53.38 (0.60, 0.42, 0.51) 0.40
0.030 0.528 0.961 58.08 (0.60, 0.42, 0.52) 0.38
0.025 0.486 0.934 63.10 (0.62, 0.42, 0.53) 0.40

Figure 7 compares the band structures of t/a = 0.065, 0.055, 0.045, 0.035, and 0.025. With the decrease of t/a, the difference of bending stiffness between the deformable L-shaped connectors and rigid lumps increases, which results in the restructuring of band structures and the new optimal combination of geometry parameters. In Figure 7(e), the mismatch of mechanical properties of L-shaped connectors and rigid lumps reaches a very extreme level. The in-plane bands (blue color) have been greatly suppressed in low frequencies due to the heavy lumps.

Figure 7 Band structures of t/a = (a) 0.065, (b) 0.055, (c) 0.045, (d) 0.035, and (e) 0.025. Color denotes the kinetic energy ratio e z .
Figure 7

Band structures of t/a = (a) 0.065, (b) 0.055, (c) 0.045, (d) 0.035, and (e) 0.025. Color denotes the kinetic energy ratio e z .

3.4 Transmission coefficient

The transmission coefficient is another important consideration, which can corroborate the band gaps achieved by the infinite theoretical model and characterize the attenuation of a finite periodic structure on elastic waves. The schematic setting for the simulation of transmission spectra is shown in Figure 8(a). The polarized line sources include x-, y-, z-, and mixed polarization, which is very useful for simulating practical applications. The cross-sectional probe is deployed behind five periods. Perfectly match layers (PML) have been arranged at the ends to alleviate the reflections of outgoing waves [50].

Figure 8 (a) Sketch of the setup for the transmission spectra. (b) Band structure. (c)–(e) Achieved transmission spectra under different excitations.
Figure 8

(a) Sketch of the setup for the transmission spectra. (b) Band structure. (c)–(e) Achieved transmission spectra under different excitations.

The calculated transmission spectra for line sources with different directions are presented in Figure 8(c)–(e), where (c) for x- and y-polarized displacements, (d) for z-polarized displacement, and (e) for a mix-polarized displacement. Compared to Figure 8(b), the attenuating ranges match well with the band gaps. However, several points need to be highlighted. First, a peak “A” supposed to be nonexistent appears at ωa/2πc t ≈ 0.35 in Figure 8(c). It corresponds to the z-directional modal shape B z4 excited by the x-polarized line source. Second, there is a subtle discrepancy between the band structure and transmission spectra on the upper edge frequencies of band gaps. It might be because some modes are deaf modes that are immune to the applied polarized line sources.

4 Conclusion

In this work, we proposed an original convex-like 1D holey PnC strip. Its potential application background might be the control of the propagation of acoustic or elastic waves in high-integration devices like MEMS. A comprehensive investigation of band gaps based on the geometrical optimization has been performed by using the finite element method. The production mechanisms are analyzed in virtue of the energy method. Compared with the conventional counterparts, the superiority lies in its simplicity, smaller size, and multiple large band gaps that can exist over a wide range of parameters. The unique folding topology constituted by L-shaped connectors provides a practicable solution for the limitations of conventional PnCs. We are convinced that these topics are conducive to further structural designs and novel applications of PnC devices.

  1. Funding information: This work was supported by the National Natural Science Foundation of China (Grant Nos. 52105575 and 11872186), the China Postdoctoral Science Foundation (Grant No. 2020M672331), and Fundamental Research Funds for the Central Universities (HUST: 2016JCTD114).

  2. Author contributions: Shan Jiang, Jun Jin and Hongping Hu conceived the idea and designed the research. Shan Jiang and Jun jin wrote the manuscript. Hongping Hu revised the manuscript.

  3. Conflict of interest: The authors state no conflict of interest.

  4. Data availability statement: All data used to support the findings of this study are included within the article.

References

[1] Hussein, M. I., M. J. Leamy, and M. Ruzzene. Dynamics of phononic materials and structures: Historical origins, recent progress, and future outlook. Applied Mechanics Reviews, Vol. 66, No. 4, 2014, id. 040802.10.1115/1.4026911Search in Google Scholar

[2] Laude, V. Phononic crystals: artificial crystals for sonic, acoustic, and elastic waves, Walter de Gruyter GmbH & Co KG, Berlin, Germany, 2015.10.1515/9783110302660Search in Google Scholar

[3] Wang, Y., Y. Wang, B. Wu, W. Chen, and Y. Wang. Tunable and active phononic crystals and metamaterials. Applied Mechanics Reviews, Vol. 72, No. 4, 2020, id. 040801.10.1115/1.4046222Search in Google Scholar

[4] Lim, C. W. From Photonic Crystals to seismic metamaterials: a review via phononic crystals and acoustic metamaterials. Archives Computational Methods Engineering, Vol. 29, 2022, pp. 1137–1198.10.1007/s11831-021-09612-8Search in Google Scholar

[5] Jin, Y., N. Fernez, Y. Pennec, B. Bonello, R. P. Moiseyenko, S. Hémon, et al. Tunable waveguide and cavity in a phononic crystal plate by controlling whispering-gallery modes in hollow pillars. Physical Review B, Vol. 93, No. 5, 2016, id. 054109.10.1103/PhysRevB.93.054109Search in Google Scholar

[6] Kurosu, M., D. Hatanaka, K. Onomitsu, and H. Yamaguchi. On-chip temporal focusing of elastic waves in a phononic crystal waveguide. Nature communications, Vol. 9, No. 1, 2018, id. 1331.10.1038/s41467-018-03726-7Search in Google Scholar PubMed PubMed Central

[7] Ghasemi Baboly, M., C. M. Reinke, B. A. Griffin, I. El-Kady, and Z. Leseman. Acoustic waveguiding in a silicon carbide phononic crystals at microwave frequencies. Applied Physics Letters, Vol. 112, No. 10, 2018, id. 103504.10.1063/1.5016380Search in Google Scholar

[8] Cummer, S. A., J. Christensen, and A. Alù. Controlling sound with acoustic metamaterials. Nature Reviews Materials, Vol. 1, No. 3, 2016, id. 16001.10.1038/natrevmats.2016.1Search in Google Scholar

[9] Jiang, S., H. Chen, L. X. Dai, H. P. Hu, and V. Laude. Multiple low-frequency broad band gaps generated by a phononic crystal of periodic circular cavity sandwich plates. Composite Structures, Vol. 176, 2017, pp. 294–303.10.1016/j.compstruct.2017.05.048Search in Google Scholar

[10] Ning, L., Y. Wang, and Y. Wang. Active control cloak of the elastic wave metamaterial. International Journal of Solids & Structures, Vol. 202, 2020, pp. 126–135.10.1016/j.ijsolstr.2020.06.009Search in Google Scholar

[11] Zhu, J., J. Christensen, J. Jung, L. Martin-Moreno, X. Yin, L. Fok, et al. A holey-structured metamaterial for acoustic deep-subwavelength imaging. Nature Physics, Vol. 7, No. 1, 2011, pp. 52–55.10.1038/nphys1804Search in Google Scholar

[12] Pennec, Y., V. Laude, N. Papanikolaou, B. Djafari-Rouhani, M. Oudich, S. El Jallal, et al. Modeling light-sound interaction in nanoscale cavities and waveguides. Nanophotonics, Vol. 3, No. 6, 2014, pp. 413–440.10.1515/nanoph-2014-0004Search in Google Scholar

[13] Jin, J., S. Jiang, H. Hu, L. Zhan, X. Wang, and V. Laude. Acousto-optic cavity coupling in 2D phoxonic crystal with combined convex and concave holes. Journal of Applied Physics, Vol. 130, No. 12, 2021, id. 123104.10.1063/5.0060412Search in Google Scholar

[14] Liu, Z. Y., X. X. Zhang, Y. W. Mao, Y. Zhu, Z. Y. Yang, C. T. Chan, et al. Locally resonant sonic materials. Science, Vol. 289, No. 5485, 2000, pp. 1734–1736.10.1126/science.289.5485.1734Search in Google Scholar PubMed

[15] Lee, T. and H. Iizuka. Bragg scattering based acoustic topological transition controlled by local resonance. Physical Review B, Vol. 99, No. 6, 2019, id. 064305.10.1103/PhysRevB.99.064305Search in Google Scholar

[16] Krushynska, A. O., M. Miniaci, F. Bosia, and N. M. J. E. M. L. Pugno. Coupling local resonance with Bragg band gaps in single-phase mechanical metamaterials. Extreme Mechanics Letters, Vol. 12, 2017, pp. 30–36.10.1016/j.eml.2016.10.004Search in Google Scholar

[17] D’Alessandro, L., E. Belloni, R. Ardito, A. Corigliano, and F. Braghin. Modeling and experimental verification of an ultra-wide bandgap in 3D phononic crystal. Applied Physics Letters, Vol. 109, No. 22, 2016, id. 221907.10.1063/1.4971290Search in Google Scholar

[18] Li, W., F. Meng, Y. Fan Li, and X. Huang. Topological design of 3D phononic crystals for ultra-wide omnidirectional bandgaps. Structural and Multidisciplinary Optimization, Vol. 60, No. 6, 2019, pp. 2405–2415.10.1007/s00158-019-02329-0Search in Google Scholar

[19] Dong, H. W., Y. S. Wang, and C. Z. Zhang. Topology optimization of chiral phoxonic crystals with simultaneously large phononic and photonic bandgaps. IEEE Photonics Journal, Vol. 9, No. 2, 2017, pp. 1–16.10.1109/JPHOT.2017.2665700Search in Google Scholar

[20] Li, W., F. Meng, Y. Chen, Y. F. Li, and X. J. Huang. Topology optimization of photonic and phononic crystals and metamaterials: a review. Advanced Theory and Simulations, Vol. 2, No. 7, 2019, id. 1900017.10.1002/adts.201900017Search in Google Scholar

[21] Dong, H. W., Y. S. Wang, T. X. Ma, and X. X. Su. Topology optimization of simultaneous photonic and phononic bandgaps and highly effective phoxonic cavity. JOSA B, Vol. 31, No. 12, 2014, pp. 2946–2955.10.1364/JOSAB.31.002946Search in Google Scholar

[22] Bao, F., X. Wu, X. Zhou, Q. Wu, X. Zhang, and J. Bao. Spider web-like phononic crystals for piezoelectric MEMS resonators to reduce acoustic energy dissipation. Micromachines, Vol. 10, No. 9, 2019, id. 626.10.3390/mi10090626Search in Google Scholar PubMed PubMed Central

[23] Workie, T. B., T. Wu, J.-F. Bao, and K.-Y. Hashimoto. Design for high-quality factor of piezoelectric-on-silicon MEMS resonators using resonant plate shape and phononic crystals. Japanese Journal of Applied Physics, Vol. 60, No. SD, 2021, id. SDDA03.10.35848/1347-4065/abe99aSearch in Google Scholar

[24] Zhang, Z., Y. Cheng, X. Liu, and J. Christensen. Subwavelength multiple topological interface states in one-dimensional labyrinthine acoustic metamaterials. Physical Review B, Vol. 99, No. 22, 2019, id. 224104.10.1103/PhysRevB.99.224104Search in Google Scholar

[25] Zhou, W. and C. J. I. J. O. M. S. Lim. Topological edge modeling and localization of protected interface modes in 1D phononic crystals for longitudinal and bending elastic waves. International Journal of Mechanical Sciences, Vol. 159, 2019, pp. 359–372.10.1016/j.ijmecsci.2019.05.020Search in Google Scholar

[26] Arrangoiz-Arriola, P., E. A. Wollack, M. Pechal, J. D. Witmer, J. T. Hill, and A. H. Safavi-Naeini. Coupling a superconducting quantum circuit to a phononic crystal defect cavity. Physical Review X, Vol. 8, No. 3, 2018, id. 031007.10.1103/PhysRevX.8.031007Search in Google Scholar

[27] Qian, D. and Z. J. P. L. A. Shi. Using PWE/FE method to calculate the band structures of the semi-infinite beam-like PCs: Periodic in z-direction and finite in x–y plane. Physics Letters A, Vol. 381, No. 17, 2017, pp. 1516–1524.10.1016/j.physleta.2017.02.049Search in Google Scholar

[28] Qian, D. and Z. Shi. Using PWE/FE Method to Calculate the Band Structures of the Semi-Infinite PCs: Periodic in xy Plane and Finite in z–direction. Archives of Acoustics, Vol. 42, 2017.10.1515/aoa-2017-0076Search in Google Scholar

[29] Cheng, J., G. Wang, and Y. J. E. A. W. B. E. Wu. A hybrid plane wave expansion/edge-based smoothed finite element method for band structures simulation of semi-infinite beam-like phononic crystals. Engineering Analysis with Boundary Elements, Vol. 130, 2021, pp. 176–185.10.1016/j.enganabound.2021.05.018Search in Google Scholar

[30] Aly, A. H., A. Nagaty, and A. Mehaney. One-dimensional phononic crystals that incorporate a defective piezoelectric/piezomagnetic as a new sensor. The European Physical Journal B, Vol. 91, No. 10, 2018, pp. 1–5.10.1140/epjb/e2018-90347-6Search in Google Scholar

[31] Lou, J., L. He, J. Yang, S. Kitipornchai, and H. J. A. A. Wu. Wave propagation in viscoelastic phononic crystal rods with internal resonators. Applied Acoustics, Vol. 141, 2018, pp. 382–392.10.1016/j.apacoust.2018.07.029Search in Google Scholar

[32] Hsu, F. C., C. I. Lee, J. C. Hsu, T. C. Huang, C. H. Wang, and P. Chang. Acoustic band gaps in phononic crystal strip waveguides. Applied Physics Letters, Vol. 96, No. 5, 2010, id. 051902.10.1063/1.3298643Search in Google Scholar

[33] Feng, D., D. H. Xu, G. Q. Wu, B. Xiong, and Y. L. Wang. Extending of band gaps in silicon based one-dimensional phononic crystal strips. Applied Physics Letters, Vol. 103, No. 15, 2013, id. 151906.10.1063/1.4824759Search in Google Scholar

[34] Jiang, S., H. P. Hu, and V. Laude. Low-frequency band gap in cross-like holey phononic crystal strip. Journal of Physics D: Applied Physics, Vol. 51, No. 4, 2018, id. 045601.10.1088/1361-6463/aa9ec1Search in Google Scholar

[35] Li, C. S., D. Huang, J. R. Guo, and J. J. Nie. Engineering of band gap and cavity mode in phononic crystal strip waveguides. Physics Letters A, Vol. 377, No. 38, 2013, pp. 2633–2637.10.1016/j.physleta.2013.07.039Search in Google Scholar

[36] Ha, T. D. Boosted anchor quality factor of a thin-film aluminum nitride-on-silicon length extensional mode MEMS resonator using phononic crystal strip. Applied Physics A, Vol. 127, No. 10, 2021, pp. 1–9.10.1007/s00339-021-04885-zSearch in Google Scholar

[37] Lim, C., J. T. Li, and Z. J. E. M. L. Zhao. Lightweight architected lattice phononic crystals with broadband and multiband vibration mitigation characteristics. Extreme Mechanics Letters, Vol. 41, 2020, id. 100994.10.1016/j.eml.2020.100994Search in Google Scholar

[38] Ampatzidis, T. and D. Chronopoulos. Mid-frequency band gap performance of sandwich composites with unconventional core geometries. Composite Structures, Vol. 222, 2019, id. 110914.10.1016/j.compstruct.2019.110914Search in Google Scholar

[39] Wu, T. C., T. T. Wu, and J. C. Hsu. Waveguiding and frequency selection of Lamb waves in a plate with a periodic stubbed surface. Physical Review B, Vol. 79, No. 10, 2009, id. 104306.10.1103/PhysRevB.79.104306Search in Google Scholar

[40] Bilal, O. R. and M. I. Hussein. Trampoline metamaterial: Local resonance enhancement by springboards. Applied Physics Letters, Vol. 103, No. 11, 2013, id. 111901.10.1063/1.4820796Search in Google Scholar

[41] Ma, C. Y., J. W. Guo, and Y. F. Liu. Extending and lowing band gaps in one-dimensional phononic crystal strip with pillars and holes. Journal of Physics and Chemistry of Solids, Vol. 87, 2015, pp. 95–103.10.1016/j.jpcs.2015.07.008Search in Google Scholar

[42] Coffy, E., T. Lavergne, M. Addouche, S. Euphrasie, P. Vairac, and A. Khelif. Ultra-wide acoustic band gaps in pillar-based phononic crystal strips. Journal of Applied Physics, Vol. 118, No. 21, 2015, id. 214902.10.1063/1.4936836Search in Google Scholar

[43] Feng, D., W. L. Jiang, D. H. Xu, B. Xiong, and Y. L. Wang. Micro-silicon phononic crystal with locally resonant theory. Applied Physics Letters, Vol. 110, No. 17, 2017, id. 171902.10.1063/1.4981121Search in Google Scholar

[44] Huang, Y., J. Li, W. Chen, and R. Bao. Tunable bandgaps in soft phononic plates with spring-mass-like resonators. International Journal of Mechanical Sciences, Vol. 151, 2019, pp. 300–313.10.1016/j.ijmecsci.2018.11.029Search in Google Scholar

[45] Jin, Y., Y. Pennec, B. Bonello, H. Honarvar, L. Dobrzynski, B. Djafari-Rouhani, et al. Physics of surface vibrational resonances: pillared phononic crystals, metamaterials, and metasurfaces. Reports on Progress in Physics, Vol. 84, No. 8, 2021, id. 086502.10.1088/1361-6633/abdab8Search in Google Scholar PubMed

[46] Fan, L., Y. He, X. Chen, and X. Zhao. Acoustic energy harvesting based on the topological interface mode of 1D phononic crystal tube. Applied Physics Express, Vol. 13, No. 1, 2019, id. 017004.10.7567/1882-0786/ab5ff8Search in Google Scholar

[47] Kim, I., S. Iwamoto, and Y. J. A. P. E. Arakawa. Topologically protected elastic waves in one-dimensional phononic crystals of continuous media. Applied Physics Express, Vol. 11, No. 1, 2017, id. 017201.10.7567/APEX.11.017201Search in Google Scholar

[48] Georgiades, F., J. Warminski, and M. P. Cartmell. Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, Vol. 38, No. 2, 2013, pp. 312–332.10.1016/j.ymssp.2012.12.006Search in Google Scholar

[49] Georgiades, F., J. Warminski, and M. P. Cartmell. Towards linear modal analysis for an L-shaped beam: Equations of motion. Mechanics Research Communications, Vol. 47, 2013, pp. 50–60.10.1016/j.mechrescom.2012.11.005Search in Google Scholar

[50] Diatta, A., M. Kadic, M. Wegener, and S. Guenneau. Scattering problems in elastodynamics. Physical Review B, Vol. 94, No. 10, 2016, id. 100105.10.1103/PhysRevB.94.100105Search in Google Scholar
Received: 2021-10-14
Revised: 2021-11-11
Accepted: 2021-12-01
Published Online: 2022-03-03

© 2022 Jun Jin et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 International License.

Articles in the same Issue

  1. Review Articles
  2. State of the art, challenges, and emerging trends: Geopolymer composite reinforced by dispersed steel fibers
  3. A review on the properties of concrete reinforced with recycled steel fiber from waste tires
  4. Copper ternary oxides as photocathodes for solar-driven CO2 reduction
  5. Properties of fresh and hardened self-compacting concrete incorporating rice husk ash: A review
  6. Basic mechanical and fatigue properties of rubber materials and components for railway vehicles: A literature survey
  7. Research progress on durability of marine concrete under the combined action of Cl− erosion, carbonation, and dry–wet cycles
  8. Delivery systems in nanocosmeceuticals
  9. Study on the preparation process and sintering performance of doped nano-silver paste
  10. Analysis of the interactions between nonoxide reinforcements and Al–Si–Cu–Mg matrices
  11. Research Articles
  12. Study on the influence of structural form and parameters on vibration characteristics of typical ship structures
  13. Deterioration characteristics of recycled aggregate concrete subjected to coupling effect with salt and frost
  14. Novel approach to improve shale stability using super-amphiphobic nanoscale materials in water-based drilling fluids and its field application
  15. Research on the low-frequency multiline spectrum vibration control of offshore platforms
  16. Multiple wide band gaps in a convex-like holey phononic crystal strip
  17. Response analysis and optimization of the air spring with epistemic uncertainties
  18. Molecular dynamics of C–S–H production in graphene oxide environment
  19. Residual stress relief mechanisms of 2219 Al–Cu alloy by thermal stress relief method
  20. Characteristics and microstructures of the GFRP waste powder/GGBS-based geopolymer paste and concrete
  21. Development and performance evaluation of a novel environmentally friendly adsorbent for waste water-based drilling fluids
  22. Determination of shear stresses in the measurement area of a modified wood sample
  23. Influence of ettringite on the crack self-repairing of cement-based materials in a hydraulic environment
  24. Multiple load recognition and fatigue assessment on longitudinal stop of railway freight car
  25. Synthesis and characterization of nano-SiO2@octadecylbisimidazoline quaternary ammonium salt used as acidizing corrosion inhibitor
  26. Perforated steel for realizing extraordinary ductility under compression: Testing and finite element modeling
  27. The influence of oiled fiber, freeze-thawing cycle, and sulfate attack on strain hardening cement-based composites
  28. Perforated steel block of realizing large ductility under compression: Parametric study and stress–strain modeling
  29. Study on dynamic viscoelastic constitutive model of nonwater reacted polyurethane grouting materials based on DMA
  30. Mechanical behavior and mechanism investigation on the optimized and novel bio-inspired nonpneumatic composite tires
  31. Effect of cooling rate on the microstructure and thermal expansion properties of Al–Mn–Fe alloy
  32. Research on process optimization and rapid prediction method of thermal vibration stress relief for 2219 aluminum alloy rings
  33. Failure prevention of seafloor composite pipelines using enhanced strain-based design
  34. Deterioration of concrete under the coupling action of freeze–thaw cycles and salt solution erosion
  35. Creep rupture behavior of 2.25Cr1Mo0.25V steel and weld for hydrogenation reactors under different stress levels
  36. Statistical damage constitutive model for the two-component foaming polymer grouting material
  37. Nano-structural and nano-constraint behavior of mortar containing silica aggregates
  38. Influence of recycled clay brick aggregate on the mechanical properties of concrete
  39. Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process
  40. Comparison of properties of colorless and transparent polyimide films using various diamine monomers
  41. Study in the parameter influence on underwater acoustic radiation characteristics of cylindrical shells
  42. Experimental study on basic mechanical properties of recycled steel fiber reinforced concrete
  43. Dynamic characteristic analysis of acoustic black hole in typical raft structure
  44. A semi-analytical method for dynamic analysis of a rectangular plate with general boundary conditions based on FSDT
  45. Research on modification of mechanical properties of recycled aggregate concrete by replacing sand with graphite tailings
  46. Dynamic response of Voronoi structures with gradient perpendicular to the impact direction
  47. Deposition mechanisms and characteristics of nano-modified multimodal Cr3C2–NiCr coatings sprayed by HVOF
  48. Effect of excitation type on vibration characteristics of typical ship grillage structure
  49. Study on the nanoscale mechanical properties of graphene oxide–enhanced shear resisting cement
  50. Experimental investigation on static compressive toughness of steel fiber rubber concrete
  51. Study on the stress field concentration at the tip of elliptical cracks
  52. Corrosion resistance of 6061-T6 aluminium alloy and its feasibility of near-surface reinforcements in concrete structure
  53. Effect of the synthesis method on the MnCo2O4 towards the photocatalytic production of H2
  54. Experimental study of the shear strength criterion of rock structural plane based on three-dimensional surface description
  55. Evaluation of wear and corrosion properties of FSWed aluminum alloy plates of AA2020-T4 with heat treatment under different aging periods
  56. Thermal–mechanical coupling deformation difference analysis for the flexspline of a harmonic drive
  57. Frost resistance of fiber-reinforced self-compacting recycled concrete
  58. High-temperature treated TiO2 modified with 3-aminopropyltriethoxysilane as photoactive nanomaterials
  59. Effect of nano Al2O3 particles on the mechanical and wear properties of Al/Al2O3 composites manufactured via ARB
  60. Co3O4 nanoparticles embedded in electrospun carbon nanofibers as free-standing nanocomposite electrodes as highly sensitive enzyme-free glucose biosensors
  61. Effect of freeze–thaw cycles on deformation properties of deep foundation pit supported by pile-anchor in Harbin
  62. Temperature-porosity-dependent elastic modulus model for metallic materials
  63. Effect of diffusion on interfacial properties of polyurethane-modified asphalt–aggregate using molecular dynamic simulation
  64. Experimental study on comprehensive improvement of shear strength and erosion resistance of yellow mud in Qiang Village
  65. A novel method for low-cost and rapid preparation of nanoporous phenolic aerogels and its performance regulation mechanism
  66. In situ bow reduction during sublimation growth of cubic silicon carbide
  67. Adhesion behaviour of 3D printed polyamide–carbon fibre composite filament
  68. An experimental investigation and machine learning-based prediction for seismic performance of steel tubular column filled with recycled aggregate concrete
  69. Effects of rare earth metals on microstructure, mechanical properties, and pitting corrosion of 27% Cr hyper duplex stainless steel
  70. Application research of acoustic black hole in floating raft vibration isolation system
  71. Multi-objective parametric optimization on the EDM machining of hybrid SiCp/Grp/aluminum nanocomposites using Non-dominating Sorting Genetic Algorithm (NSGA-II): Fabrication and microstructural characterizations
  72. Estimating of cutting force and surface roughness in turning of GFRP composites with different orientation angles using artificial neural network
  73. Displacement recovery and energy dissipation of crimped NiTi SMA fibers during cyclic pullout tests
https://doi.org/10.1515/rams-2022-0010
Keywords for this article
phononic crystal strip; band gap; L-shaped connectors; folding strategy
Creative Commons
BY 4.0

Articles in the same Issue

  1. Review Articles
  2. State of the art, challenges, and emerging trends: Geopolymer composite reinforced by dispersed steel fibers
  3. A review on the properties of concrete reinforced with recycled steel fiber from waste tires
  4. Copper ternary oxides as photocathodes for solar-driven CO2 reduction
  5. Properties of fresh and hardened self-compacting concrete incorporating rice husk ash: A review
  6. Basic mechanical and fatigue properties of rubber materials and components for railway vehicles: A literature survey
  7. Research progress on durability of marine concrete under the combined action of Cl− erosion, carbonation, and dry–wet cycles
  8. Delivery systems in nanocosmeceuticals
  9. Study on the preparation process and sintering performance of doped nano-silver paste
  10. Analysis of the interactions between nonoxide reinforcements and Al–Si–Cu–Mg matrices
  11. Research Articles
  12. Study on the influence of structural form and parameters on vibration characteristics of typical ship structures
  13. Deterioration characteristics of recycled aggregate concrete subjected to coupling effect with salt and frost
  14. Novel approach to improve shale stability using super-amphiphobic nanoscale materials in water-based drilling fluids and its field application
  15. Research on the low-frequency multiline spectrum vibration control of offshore platforms
  16. Multiple wide band gaps in a convex-like holey phononic crystal strip
  17. Response analysis and optimization of the air spring with epistemic uncertainties
  18. Molecular dynamics of C–S–H production in graphene oxide environment
  19. Residual stress relief mechanisms of 2219 Al–Cu alloy by thermal stress relief method
  20. Characteristics and microstructures of the GFRP waste powder/GGBS-based geopolymer paste and concrete
  21. Development and performance evaluation of a novel environmentally friendly adsorbent for waste water-based drilling fluids
  22. Determination of shear stresses in the measurement area of a modified wood sample
  23. Influence of ettringite on the crack self-repairing of cement-based materials in a hydraulic environment
  24. Multiple load recognition and fatigue assessment on longitudinal stop of railway freight car
  25. Synthesis and characterization of nano-SiO2@octadecylbisimidazoline quaternary ammonium salt used as acidizing corrosion inhibitor
  26. Perforated steel for realizing extraordinary ductility under compression: Testing and finite element modeling
  27. The influence of oiled fiber, freeze-thawing cycle, and sulfate attack on strain hardening cement-based composites
  28. Perforated steel block of realizing large ductility under compression: Parametric study and stress–strain modeling
  29. Study on dynamic viscoelastic constitutive model of nonwater reacted polyurethane grouting materials based on DMA
  30. Mechanical behavior and mechanism investigation on the optimized and novel bio-inspired nonpneumatic composite tires
  31. Effect of cooling rate on the microstructure and thermal expansion properties of Al–Mn–Fe alloy
  32. Research on process optimization and rapid prediction method of thermal vibration stress relief for 2219 aluminum alloy rings
  33. Failure prevention of seafloor composite pipelines using enhanced strain-based design
  34. Deterioration of concrete under the coupling action of freeze–thaw cycles and salt solution erosion
  35. Creep rupture behavior of 2.25Cr1Mo0.25V steel and weld for hydrogenation reactors under different stress levels
  36. Statistical damage constitutive model for the two-component foaming polymer grouting material
  37. Nano-structural and nano-constraint behavior of mortar containing silica aggregates
  38. Influence of recycled clay brick aggregate on the mechanical properties of concrete
  39. Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process
  40. Comparison of properties of colorless and transparent polyimide films using various diamine monomers
  41. Study in the parameter influence on underwater acoustic radiation characteristics of cylindrical shells
  42. Experimental study on basic mechanical properties of recycled steel fiber reinforced concrete
  43. Dynamic characteristic analysis of acoustic black hole in typical raft structure
  44. A semi-analytical method for dynamic analysis of a rectangular plate with general boundary conditions based on FSDT
  45. Research on modification of mechanical properties of recycled aggregate concrete by replacing sand with graphite tailings
  46. Dynamic response of Voronoi structures with gradient perpendicular to the impact direction
  47. Deposition mechanisms and characteristics of nano-modified multimodal Cr3C2–NiCr coatings sprayed by HVOF
  48. Effect of excitation type on vibration characteristics of typical ship grillage structure
  49. Study on the nanoscale mechanical properties of graphene oxide–enhanced shear resisting cement
  50. Experimental investigation on static compressive toughness of steel fiber rubber concrete
  51. Study on the stress field concentration at the tip of elliptical cracks
  52. Corrosion resistance of 6061-T6 aluminium alloy and its feasibility of near-surface reinforcements in concrete structure
  53. Effect of the synthesis method on the MnCo2O4 towards the photocatalytic production of H2
  54. Experimental study of the shear strength criterion of rock structural plane based on three-dimensional surface description
  55. Evaluation of wear and corrosion properties of FSWed aluminum alloy plates of AA2020-T4 with heat treatment under different aging periods
  56. Thermal–mechanical coupling deformation difference analysis for the flexspline of a harmonic drive
  57. Frost resistance of fiber-reinforced self-compacting recycled concrete
  58. High-temperature treated TiO2 modified with 3-aminopropyltriethoxysilane as photoactive nanomaterials
  59. Effect of nano Al2O3 particles on the mechanical and wear properties of Al/Al2O3 composites manufactured via ARB
  60. Co3O4 nanoparticles embedded in electrospun carbon nanofibers as free-standing nanocomposite electrodes as highly sensitive enzyme-free glucose biosensors
  61. Effect of freeze–thaw cycles on deformation properties of deep foundation pit supported by pile-anchor in Harbin
  62. Temperature-porosity-dependent elastic modulus model for metallic materials
  63. Effect of diffusion on interfacial properties of polyurethane-modified asphalt–aggregate using molecular dynamic simulation
  64. Experimental study on comprehensive improvement of shear strength and erosion resistance of yellow mud in Qiang Village
  65. A novel method for low-cost and rapid preparation of nanoporous phenolic aerogels and its performance regulation mechanism
  66. In situ bow reduction during sublimation growth of cubic silicon carbide
  67. Adhesion behaviour of 3D printed polyamide–carbon fibre composite filament
  68. An experimental investigation and machine learning-based prediction for seismic performance of steel tubular column filled with recycled aggregate concrete
  69. Effects of rare earth metals on microstructure, mechanical properties, and pitting corrosion of 27% Cr hyper duplex stainless steel
  70. Application research of acoustic black hole in floating raft vibration isolation system
  71. Multi-objective parametric optimization on the EDM machining of hybrid SiCp/Grp/aluminum nanocomposites using Non-dominating Sorting Genetic Algorithm (NSGA-II): Fabrication and microstructural characterizations
  72. Estimating of cutting force and surface roughness in turning of GFRP composites with different orientation angles using artificial neural network
  73. Displacement recovery and energy dissipation of crimped NiTi SMA fibers during cyclic pullout tests
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 11.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/rams-2022-0010/html
Scroll to top button