Abstract
In this article, a numerical model for a Brusselator advection–reaction–diffusion (BARD) system by using an elegant numerical scheme is developed. The consistency and stability of the proposed scheme is demonstrated. Positivity preserving property of the proposed scheme is also verified. The designed scheme is compared with the two well-known existing classical schemes to validate the certain physical properties of the continuous system. A test problem is also furnished for simulations to support our claim. Prior to computations, the existence and uniqueness of solutions for more generic problems is investigated. In the underlying system, the nonlinearities depend not only on the desired solution but also on the advection term that reflects the pivotal importance of the study.
1 Introduction
Nonlinear partial differential equations describe the various physical phenomena in applied sciences. So more researchers are directed to find the solutions of these equations in recent years. Nowadays, reaction diffusion systems of partial differential equations have launched multitudinous applications in chemical and biological phenomena to finance, physics, medicine, genetics, weather predictions and so on [1,2,3,4,5,6]. In this paper, we are engrossed to analyze the mathematical models, which comprise the mixture of advection, diffusion and reaction in the framework of partial differential equations. The advection–reaction–diffusion equation is one of the most pertinent areas in the applied mathematics, like chemical reactions in chemistry, biology, meteorology, epidemiology, fluid dynamics, and other fields of applied sciences. The inclusion of the combination of these three components in a mathematical model of partial differential equations puts a strong impact on the theory of partial differential equations and gives a rise to rethink the corresponding models in the light of the physical properties of a governing phenomenon [7,8,9,10,11]. Most of the mathematical models associated with the mixture of the reactive and advective processes can be observed in various directions in real life, for instance, in meteorological pollution control models, dynamics of age-structured population and problems consisting of the enhancement of oil recovery, etc. [12,13,14,15,16].
If u(x,t) and v(x,t) are the concentrations of two chemical species, then the terms
This article is organized as follows: Section 2 presents the general problem of the advection–reaction–diffusion system and results on existence of a solution for the proposed model. Section 3 presents a Brusselator advection–reaction–diffusion (BARD) model. Here, we analyze the problem by known numerical schemes: upwind implicit and Crank Nicolson numerical scheme. In Section 4, we apply a newly constructed scheme on BADR model and simulate the results and observe the unconditional natural properties such as consistency and stability of our proposed scheme. Also, the results about positivity preserving algorithms are formulated. Section 5 presents an example confirming the stated results. Also, we observe the behavior of our constructed scheme with the comparison of the other two schemes discussed earlier in this section. Section 6 concludes this study with an overview of the obtained results.
2 Existence of solutions
In this contemprary section, the existence of the solution for the advection–reaction–diffusion system is discussed. A couple of results for the existence of the solution to the said system are established.
Consider a system of differential equations:
To understand the mathematical analysis of the advection–reaction–diffusion system system, which is a well-known first-order nonlinear dynamical system of advection–diffusion partial differential equations, we use the Schauder fixed point theorem for the existence of the solution. An important question in the existence theory is to guarantee if the advection–reaction–diffusion system system possesses some solutions. The junction of the fixed-point, operator theory helps us to reduce the initial value problem for th advection–reaction–diffusion system system in the corresponding fixed point operator. Since both the partial differential equations are of first order with respect to the time variable t, it is quite simple to invert the differential operator
Here, it is important to note that both u and v being the concentrations of the quantities should be nonnegative. Importantly, the functions F 1 and F 2 on the right-hand side of equations (3) and (4) can be nonlinear in not only the solution pair (u,v) but also the the first- and second-order space derivatives u x , v x , u xx and v xx of the desired solution pair.
In view of the operator theory, equations (1) and (2) can be written in the following form:
with setting F 2(u, v, v x , v xx ) ≡ F 2.
Such inversion of the first-order partial derivatives is obvious, but for the inversion of more general operators, one may need special kernel functions. It is clear from equations (5) and (6) that the solutions u and v depend on the same functions appearing in the right-hand sides of the same equations, respectively. So the operator theory allows us to write equations (5) and (6) in an operator form [19,20,21]. But in the case of a system of equations under the contemporary study, we can rewrite them into the following single equation.
The integral equation (7) can be written as a fixed point problem:
where
and let S:E → E be a self-mapping defined by
where E is supposed to be a Banach space.
We now establish a lemma, which shows the compactness of S.
Lemma 2.1
Let S:E → E be any map defined by
with u(0) = u 0 and suppose that
with 0 ≤ u ≤ N 1, 0 ≤ v ≤ N 2 , where N 1 and N 2 are finite positive numbers. Then, S is relatively compact.
Proof
Since both F 1 and F 2 are assumed to be nonnegative and continuous functions, so, the operator S is continuous. Let B be a bounded subset of E and there exists a number N 0 such that for any u ∈ B, we have
Now, take
hence, S(B) is uniformly bounded.
Next, we have to show the equi-continuity of S. For each u ∈ B and for ε > 0 and t
1,t
2 ∈ [0,T] such that t
1 < t
2 then |t
2 − t
1| < δ and let
For this, let
Clearly, |S
i
u(x,t
1) − S
i
u(x,t
2)| approaches zero as |t
1 − t
2| → 0. This implies that S
i
is equicontinuous. By the Arzela Ascoli theorem, there exists a subsequence
Also, as S is in space of continuous functions, S:C[0,T] → C[0,T] is self-map. F 1 and F 2 are nonnegative, and u 0 ≥ 0 because u 0 represents the initial concentration that cannot be negative. That is,
Hence, according to the statement of the Schauder fixed-point theorem, the operator S has at least one fixed point u(x,t) ∈ E, where t ∈ [0,T]. Hence, equation (1) has at least one solution u(x,t) in C 2[0,T].
Now we can establish a theorem for the existence of the solution of equation (7).
Theorem 2.2
If u, v are twice continuously differentiable with respect to the space variable x and continuously differentiable with respect to time t, then the initial boundary value problem for equations (1) and (2) are solvable by the Schauder fixed point theorem for any continuous initial values.
2.1 Uniqueness of the solution
Theorem 2.2 guarantees the existence of the solution, which itself gives importance to the considered problem for physical purpose. For the uniqueness of the solution of equations (1) and (2),
Consider
Now suppose F
1 is Lipschitz continuous in u, u
x
, u
x
x and
where ρ is the length of interval of continuity. Then for the contractivity of S guarantees if
Finally, we establish the following theorem with unique existence of solution.
3 Numerical methods
The primary aim of the study of finite difference schemes to find the solution of linear and nonlinear partial differential equations is to discretize the given continuous system by approximating the partial derivatives occurring in the continuous formulations by the finite number of function values at some selected finite number of points in the domain. In this respect, Taylor’s series is the finest way to obtain these approximations.
For the rest of the paper, let K and L be positive integers and τ be any positive real number. To find the approximate solution of system of equations (12) and (13) in the spatial interval [a,b] over the time period [0,τ], we make a partitions a = x
0 < x
1 < x
2 < … < x
L
= b and 0 = t
0 < t
1 < t
2 < … < t
K
= τ of [a,b] and [0,τ] respectively, with the norm
Let
The generalized advection–reaction–diffusion model is as follows:
with initial and boundary conditions, i.e.,
where u and v are the concentration of two different reactants, A and B are constant terms representing constant concentration during reaction operation, d
1 and d
2 are diffusion coefficients and all A, B, d
1, and d
2 are positive constants. The equilibrium point of the system (12) and (13) is
3.1 The upwind implicit scheme
According to this scheme, both time and space derivatives are established as follows:
Substituting theses values in equations (12) and (13), we get the upwind implicit scheme as follows:
where
The aforementioned upwind implicit schemes indicate that the system of algebraic equations developed by this scheme is diagonally dominant and so its solution exists. The behavior of this scheme is found to be Von Neumann stable.
3.2 The Crank Nicolson scheme
In this scheme, we replace both the time and the spatial partial derivatives by their central difference approximations at a grid point
The difference equations associated by equations (12) and (13), after using the above approximations, we get,
where
Now, we are adopting an efficient finite difference scheme, which has positivity preserving and structural preserving properties. We apply this scheme on the model (12) and (13).
4 Proposed structure preserving numerical scheme
Numerous numerical schemes are developed and used to solve the mathematical models so far, and some of them are implicit and some are explicit schemes. In explicit schemes, dependent variables are expressed as a function of some known quantities at the previous time unit (say n time step), whereas in case of implicit schemes, dependent variables are determined by the coupled system of multiple simultaneous algebraic equations and used to obtain the solution either in the form of the matrix or some iterative processes. In this method, all unknown quantities are evaluated at the future time step, (say (n + 1) time step), as well as we are allowed to take a large time step size in each iteration of the implicit scheme. Although computations through implicit schemes are intensively expensive due to their formations, there is only less error in the simulation process to explicit methods. As stability represents the behavior of the solution with the increase of the time step size, if the solution shows the controlled behavior for a large time step size, the numerical scheme is unconditionally stable. But such a situation does not appear in case of explicit schemes, which are usually always conditionally stable. In this paper, we use an explicit scheme to solve the system (12) and (13). But we observe that this proposed scheme, despite of being explicit, is very effective and behaved well, consistent and unconditionally stable. However, other implicit schemes in this paper do not behave well. We demonstrate such a situation in this paper through simulation.
The proposed scheme, which we are adopting for the model (12) and (13) developed in Ref. [24], is explicit in nature and unconditionally positivity preserving.
The formulas for temporal and spatial derivatives according to our proposed scheme are given by
The numerical modulation for equations (12) and (13) are as follows:
where
We will check the consistency and the stability of our proposed scheme by equations (12) and (13).
Theorem 4.1
Suppose that
4.1 Remark
Equations (14) and (15) give the positivity of the solution because the known functions occurred in the initial conditions are nonnegative, so the right-hand sides of equations (14) and (15) bear no negative terms for all discretization parameters i, n = 0, 1, 2, 3,….
4.2 Consistency of proposed scheme
For equation (12)
By using the approximations of the proposed scheme, we obtain
By using Taylor’s series and simplifications, we obtain
By replacing k by h 3, we obtain
By taking the limit as h → 0
which proves the consistency.
Now from equation (13)
Taylor’s formulae are as follows:
After substituting these formulas in the aforementioned equation, we obtain
By replacing k by h 3 and h → 0, we obtain
Which is (13). It verifies that the proposed scheme is consistent.
Now we investigate the stability of the proposed scheme referred to given system of equations.
4.3 Stability of proposed scheme
To verify the stability of our proposed scheme, we consider both the equations of given mathematical model of advection–reaction–diffusion. First, we select equation (12) and incorporate
Let
For the sake of linearization, let
This implies that
which is always less than 1.
Now set
Let
According to Von Neumann stability criteria, our proposed scheme is unconditionally stable.
5 Numerical example and simulations
with boundary value conditions
Clearly, in Figure 1(b) and (c) drawn from upwind implicit scheme, by choosing A and B such that 1 − A + B 2 > 0, we observe that the graph is lying in the negative side, which is not possible for any type of concentration.

(a) Mesh graph of u (concentration profile) using upwind implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.006, τ = 3 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using the upwind implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.006, τ = 3 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
On the other hand, in Figure 2, when we observe the graph of concentrations u and v from the proposed scheme at the same values of the parameters, it remains in the positive side, which shows that the proposed scheme is well behaved or positivity preserving with the aforementioned parameter values.

(a) Mesh graph of u (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.006, τ = 3 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.006, τ = 3 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
Now we look at the comparison of proposed scheme with Crank Nicolson implicit scheme.
In Figure 3, after choosing the values of A and B such that 1 − A + B 2 > 0, the graphs of u and v fall in the negative side, which is naturally not possible.

(a) Mesh graph of u (concentration profile) using Crank Nicolson implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.032, τ = 1.6 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using Crank Nicolson implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.008, τ = 1.6 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
In Figure 4, the graph of the proposed scheme with same values of parameters used in Crank Nicolson implicit scheme shows the positivity of the concentration variables, that is, the scheme is positivity preserving.

(a) Mesh graph of u (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.032, τ = 1.6 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.008, τ = 1.6 and d 1 = d 2 = 10−4. (c) The combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
In Figure 5, when we incorporate the same values of ξ 1 and ξ 2 in both concentration profiles with comparatively large time scale, we obtain the graphs of u and v that are tilted in the negative sides. This shows the unstability of the scheme.

(a) Mesh graph of u (concentration profile) using upwind implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.012, τ = 5.90 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using upwind implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.012, τ = 5.90 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
But in the graph of proposed scheme, with the same values of the parameters, we observe the stability of our proposed scheme (Figure 6).

(a) Mesh graph of u (concentration profile) using proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.012, τ = 5.90 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.012, τ = 5.90 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
In Figure 7, when we incorporate the same values to ξ 1 = ξ 2 = 0.004, with same τ = 2, the well-known Crank Nicolson scheme gives the unstable behavior.

(a) Mesh graph of u (concentration profile) using Crank Nicolson implicit FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using Crank Nicolson FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (c) Combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
On the other hand, our proposed scheme shows the stability at the same values of parameters used in the graph of Figure 8.
In Figure 9, when the condition for convergence of concentration profile is violated, that is, even our scheme shows the positivity, which is one of the basic requirements of any numerical scheme. Finally, we observe that our proposed scheme for the proposed model is unconditionally stable.

(a) Mesh graph of u (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (c) The combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).

(a) Mesh graph of u (concentration profile) using the proposed FD method at h = 0.05, B = 3.4, A = 1, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (b) Mesh graph of v (concentration profile) using the proposed FD method at h = 0.05, B = 1, A = 3.4, ξ 1 = ξ 2 = 0.004, τ = 2 and d 1 = d 2 = 10−4. (c) The combined plot of u, v at x = 1 vs time with same parameters as discussed in (a) and (b).
6 Conclusion
In this paper, we demonstrated the existence of solution of a nonlinear advection–reaction–diffusion model by using the Schauder fixed point theorem, which is a strong tool to prove the existence of fixed points of nonlinear operators in the fixed point theory. First, we converted the system of equations to a single nonlinear differential equation and then constructed a fixed-point differential operator. We proved here that the fixed points of this operator exist under some suitable conditions. After obtaining the existence of solution of our proposed model, we designed an unconditionally positivity preserving finite difference numerical scheme, which is explicit in nature, for a nonlinear advection–reaction–diffusion model. Despite of explicitly, our proposed scheme is more efficient than the existing techniques due to positivity preserving property. The results of the proposed scheme are compared with the well-known upwind implicit scheme and Crank Nicolson scheme and can be observed that these schemes are unable to preserve the positivity at certain time interval. Since the solutions functions of the differential equations are not globally bounded, it is better to consider the closed optimal balls in function spaces, which give the explicit estimates for the solutions of the system. So for the future work, we can optimize the convergence of the solution. In case of the numerical analysis, we can use our proposed scheme in two- or three-dimensional advection–reaction–diffusion system to obtain the numerical solution for the future perspective. Also, the work can be extended to the system of stochastic differential equations.
-
Conflict of interest: The authors declare that they have no conflict of interest.
-
Funding: This study has no funding.
References
[1] Arson DG. A comparison method for stability analysis of nonlinear parabolic problems. SIAM Rev. 1978;20:245–64.10.1137/1020038Search in Google Scholar
[2] Bebemes JW, Schmitt K. On the existence of maximal and minimal solutions for parabolic partial differential equations. Pro Amer Math Soc. 1979;73(21):1–218.Search in Google Scholar
[3] Escobedo M, Herrero MA. Boundedness and blow up for a semilinear reaction-diffusion system. J Differential Equ. 1991;89:176–202.10.1016/0022-0396(91)90118-SSearch in Google Scholar
[4] Liu BC, Dong MZ, Li FJ. Asymptotic properties of blow-up solutions in reaction-diffusion equations with nonlocal boundary flux. Z Angew Math Phys. 2018;69:22.10.1007/s00033-018-0920-2Search in Google Scholar
[5] Ahmed N, Rafiq M, Rehman MA, Iqbal MS, Ali M. Numerical modeling of three dimensional Brusselator system. AIP Adv. 2019;9:015205.10.1063/1.5070093Search in Google Scholar
[6] He X, Ni WM. The effects of diffusion and spatial variation in Lotka-Volterra competition-diffusion system II: the general case. J Differential Equ. 2013;254:4088–108.10.1016/j.jde.2013.02.009Search in Google Scholar
[7] Zhou P, Xiao D. Global dynamics of a classical Lotka-Volterra competition-diffusion-advection system. J Funct Anal. 2018;275(2):356–80.10.1016/j.jfa.2018.03.006Search in Google Scholar
[8] Zhao XQ, Zhou P. On a Lotka-Volterra competition model: the effects of advection and spatial variation. Calc Var. 2016;55:137.10.1007/s00526-016-1021-8Search in Google Scholar
[9] Rui P, Zhao XQ. A nonlocal and periodic reaction-diffusion-advection model of a single phytoplankton species. J Math Biol. 2016;72:755–91.10.1007/s00285-015-0904-1Search in Google Scholar PubMed
[10] Yu X, Zhao XQ. Propagation phenomena for a reaction-advection-diffusion competition model in a periodic habitat. J Dyn Diff Equat. 2017;29:41, 10.1007/s10884-015-9426-1 Search in Google Scholar
[11] Zhang L, Wanga ZC, Zhao XQ. Threshold dynamics of a time periodic reaction-diffusion epidemic model with latent period. J Differential Equ. 2015;258(9):3011–36.10.1016/j.jde.2014.12.032Search in Google Scholar
[12] Lin H, Wang F. On a reaction-diffusion system modeling the Dengue transmission with nonlocal infections and crowding effects. Appl Math Comput. 2014;248:184–94.10.1016/j.amc.2014.09.101Search in Google Scholar
[13] Macufa MM, Mayer JF, Krindges A. Difussion of Malaria in Mozambique. Model Comput Simul, Biomatematica. 2015;25:161–84.Search in Google Scholar
[14] Lotfi EM, Maziane M, Hattaf K, Yousti N. Partial differential equations of an epidemic model with spatial difussion. Int J Partial Differential Equ. 2014;186437.10.1155/2014/186437Search in Google Scholar
[15] Ren X, Tian Y, Liu L, Liu X. A reaction difussion withen-host HIV model with cell-to-cell transmision. J Math Biol. 2018;76:1831–72.10.1007/s00285-017-1202-xSearch in Google Scholar PubMed
[16] Cosner C. Reaction-diffusion-advection models for the effects and evolution of dispersal. Discret Contin Dyn Syst. 2014;34:1701–45.10.3934/dcds.2014.34.1701Search in Google Scholar
[17] Cantrell RS, Cosner C. Spatial ecology via reaction-diffusion equations. Wiley Ser Math Comput Biol. Chichester, UK: John Wiley and Sons; 2003.10.1002/0470871296Search in Google Scholar
[18] Dockery J, Hutson V, Mischaikow K, Pernarowski M. The evolution of slow dispersal rates: areaction-diffusion model. J Math Biol. 1968;37:61–83.10.1007/s002850050120Search in Google Scholar
[19] Hsieh PF, Sibuya Y. Theory of ordinary differential equations. New York: Springer; 1999.10.1007/978-1-4612-1506-6Search in Google Scholar
[20] Agarwal RP, Lakshmikantham V. Uniqueness and nonuniqueness criteria for ordinary differential equations. Singapore: World Scientific; 1993.10.1142/1988Search in Google Scholar
[21] Djebali S, Górniewicz L, Ouahab A. Solution sets for differential equations and inclusions. Berlin/Boston: Walter de Gruyter GmbH; 2013.10.1515/9783110293562Search in Google Scholar
[22] Mickens RE. Nonstandard finite difference models of differential equations. Singapore: World Scientific; 1994. 10.1142/2081 Search in Google Scholar
[23] Twizell EH, Gumel AB, Cao Q. A second order scheme for the Brusselator reaction-diffusion system. J Math Chem. 1999;26:297–316.10.1023/A:1019158500612Search in Google Scholar
[24] Chen-Charpentier BM, Kojouharov HV. Unconditionally positive preserving scheme for advection-diffusion-reaction equations. Math Comput Modeling. 2013;57:2177–185.10.1016/j.mcm.2011.05.005Search in Google Scholar
© 2020 Naveed Shahid et al., published by De Gruyter
This work is licensed under the Creative Commons Attribution 4.0 International License.
Articles in the same Issue
- Regular Articles
- Model of electric charge distribution in the trap of a close-contact TENG system
- Dynamics of Online Collective Attention as Hawkes Self-exciting Process
- Enhanced Entanglement in Hybrid Cavity Mediated by a Two-way Coupled Quantum Dot
- The nonlinear integro-differential Ito dynamical equation via three modified mathematical methods and its analytical solutions
- Diagnostic model of low visibility events based on C4.5 algorithm
- Electronic temperature characteristics of laser-induced Fe plasma in fruits
- Comparative study of heat transfer enhancement on liquid-vapor separation plate condenser
- Characterization of the effects of a plasma injector driven by AC dielectric barrier discharge on ethylene-air diffusion flame structure
- Impact of double-diffusive convection and motile gyrotactic microorganisms on magnetohydrodynamics bioconvection tangent hyperbolic nanofluid
- Dependence of the crossover zone on the regularization method in the two-flavor Nambu–Jona-Lasinio model
- Novel numerical analysis for nonlinear advection–reaction–diffusion systems
- Heuristic decision of planned shop visit products based on similar reasoning method: From the perspective of organizational quality-specific immune
- Two-dimensional flow field distribution characteristics of flocking drainage pipes in tunnel
- Dynamic triaxial constitutive model for rock subjected to initial stress
- Automatic target recognition method for multitemporal remote sensing image
- Gaussons: optical solitons with log-law nonlinearity by Laplace–Adomian decomposition method
- Adaptive magnetic suspension anti-rolling device based on frequency modulation
- Dynamic response characteristics of 93W alloy with a spherical structure
- The heuristic model of energy propagation in free space, based on the detection of a current induced in a conductor inside a continuously covered conducting enclosure by an external radio frequency source
- Microchannel filter for air purification
- An explicit representation for the axisymmetric solutions of the free Maxwell equations
- Floquet analysis of linear dynamic RLC circuits
- Subpixel matching method for remote sensing image of ground features based on geographic information
- K-band luminosity–density relation at fixed parameters or for different galaxy families
- Effect of forward expansion angle on film cooling characteristics of shaped holes
- Analysis of the overvoltage cooperative control strategy for the small hydropower distribution network
- Stable walking of biped robot based on center of mass trajectory control
- Modeling and simulation of dynamic recrystallization behavior for Q890 steel plate based on plane strain compression tests
- Edge effect of multi-degree-of-freedom oscillatory actuator driven by vector control
- The effect of guide vane type on performance of multistage energy recovery hydraulic turbine (MERHT)
- Development of a generic framework for lumped parameter modeling
- Optimal control for generating excited state expansion in ring potential
- The phase inversion mechanism of the pH-sensitive reversible invert emulsion from w/o to o/w
- 3D bending simulation and mechanical properties of the OLED bending area
- Resonance overvoltage control algorithms in long cable frequency conversion drive based on discrete mathematics
- The measure of irregularities of nanosheets
- The predicted load balancing algorithm based on the dynamic exponential smoothing
- Influence of different seismic motion input modes on the performance of isolated structures with different seismic measures
- A comparative study of cohesive zone models for predicting delamination fracture behaviors of arterial wall
- Analysis on dynamic feature of cross arm light weighting for photovoltaic panel cleaning device in power station based on power correlation
- Some probability effects in the classical context
- Thermosoluted Marangoni convective flow towards a permeable Riga surface
- Simultaneous measurement of ionizing radiation and heart rate using a smartphone camera
- On the relations between some well-known methods and the projective Riccati equations
- Application of energy dissipation and damping structure in the reinforcement of shear wall in concrete engineering
- On-line detection algorithm of ore grade change in grinding grading system
- Testing algorithm for heat transfer performance of nanofluid-filled heat pipe based on neural network
- New optical solitons of conformable resonant nonlinear Schrödinger’s equation
- Numerical investigations of a new singular second-order nonlinear coupled functional Lane–Emden model
- Circularly symmetric algorithm for UWB RF signal receiving channel based on noise cancellation
- CH4 dissociation on the Pd/Cu(111) surface alloy: A DFT study
- On some novel exact solutions to the time fractional (2 + 1) dimensional Konopelchenko–Dubrovsky system arising in physical science
- An optimal system of group-invariant solutions and conserved quantities of a nonlinear fifth-order integrable equation
- Mining reasonable distance of horizontal concave slope based on variable scale chaotic algorithms
- Mathematical models for information classification and recognition of multi-target optical remote sensing images
- Hopkinson rod test results and constitutive description of TRIP780 steel resistance spot welding material
- Computational exploration for radiative flow of Sutterby nanofluid with variable temperature-dependent thermal conductivity and diffusion coefficient
- Analytical solution of one-dimensional Pennes’ bioheat equation
- MHD squeezed Darcy–Forchheimer nanofluid flow between two h–distance apart horizontal plates
- Analysis of irregularity measures of zigzag, rhombic, and honeycomb benzenoid systems
- A clustering algorithm based on nonuniform partition for WSNs
- An extension of Gronwall inequality in the theory of bodies with voids
- Rheological properties of oil–water Pickering emulsion stabilized by Fe3O4 solid nanoparticles
- Review Article
- Sine Topp-Leone-G family of distributions: Theory and applications
- Review of research, development and application of photovoltaic/thermal water systems
- Special Issue on Fundamental Physics of Thermal Transports and Energy Conversions
- Numerical analysis of sulfur dioxide absorption in water droplets
- Special Issue on Transport phenomena and thermal analysis in micro/nano-scale structure surfaces - Part I
- Random pore structure and REV scale flow analysis of engine particulate filter based on LBM
- Prediction of capillary suction in porous media based on micro-CT technology and B–C model
- Energy equilibrium analysis in the effervescent atomization
- Experimental investigation on steam/nitrogen condensation characteristics inside horizontal enhanced condensation channels
- Experimental analysis and ANN prediction on performances of finned oval-tube heat exchanger under different air inlet angles with limited experimental data
- Investigation on thermal-hydraulic performance prediction of a new parallel-flow shell and tube heat exchanger with different surrogate models
- Comparative study of the thermal performance of four different parallel flow shell and tube heat exchangers with different performance indicators
- Optimization of SCR inflow uniformity based on CFD simulation
- Kinetics and thermodynamics of SO2 adsorption on metal-loaded multiwalled carbon nanotubes
- Effect of the inner-surface baffles on the tangential acoustic mode in the cylindrical combustor
- Special Issue on Future challenges of advanced computational modeling on nonlinear physical phenomena - Part I
- Conserved vectors with conformable derivative for certain systems of partial differential equations with physical applications
- Some new extensions for fractional integral operator having exponential in the kernel and their applications in physical systems
- Exact optical solitons of the perturbed nonlinear Schrödinger–Hirota equation with Kerr law nonlinearity in nonlinear fiber optics
- Analytical mathematical schemes: Circular rod grounded via transverse Poisson’s effect and extensive wave propagation on the surface of water
- Closed-form wave structures of the space-time fractional Hirota–Satsuma coupled KdV equation with nonlinear physical phenomena
- Some misinterpretations and lack of understanding in differential operators with no singular kernels
- Stable solutions to the nonlinear RLC transmission line equation and the Sinh–Poisson equation arising in mathematical physics
- Calculation of focal values for first-order non-autonomous equation with algebraic and trigonometric coefficients
- Influence of interfacial electrokinetic on MHD radiative nanofluid flow in a permeable microchannel with Brownian motion and thermophoresis effects
- Standard routine techniques of modeling of tick-borne encephalitis
- Fractional residual power series method for the analytical and approximate studies of fractional physical phenomena
- Exact solutions of space–time fractional KdV–MKdV equation and Konopelchenko–Dubrovsky equation
- Approximate analytical fractional view of convection–diffusion equations
- Heat and mass transport investigation in radiative and chemically reacting fluid over a differentially heated surface and internal heating
- On solitary wave solutions of a peptide group system with higher order saturable nonlinearity
- Extension of optimal homotopy asymptotic method with use of Daftardar–Jeffery polynomials to Hirota–Satsuma coupled system of Korteweg–de Vries equations
- Unsteady nano-bioconvective channel flow with effect of nth order chemical reaction
- On the flow of MHD generalized maxwell fluid via porous rectangular duct
- Study on the applications of two analytical methods for the construction of traveling wave solutions of the modified equal width equation
- Numerical solution of two-term time-fractional PDE models arising in mathematical physics using local meshless method
- A powerful numerical technique for treating twelfth-order boundary value problems
- Fundamental solutions for the long–short-wave interaction system
- Role of fractal-fractional operators in modeling of rubella epidemic with optimized orders
- Exact solutions of the Laplace fractional boundary value problems via natural decomposition method
- Special Issue on 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering
- Joint use of eddy current imaging and fuzzy similarities to assess the integrity of steel plates
- Uncertainty quantification in the design of wireless power transfer systems
- Influence of unequal stator tooth width on the performance of outer-rotor permanent magnet machines
- New elements within finite element modeling of magnetostriction phenomenon in BLDC motor
- Evaluation of localized heat transfer coefficient for induction heating apparatus by thermal fluid analysis based on the HSMAC method
- Experimental set up for magnetomechanical measurements with a closed flux path sample
- Influence of the earth connections of the PWM drive on the voltage constraints endured by the motor insulation
- High temperature machine: Characterization of materials for the electrical insulation
- Architecture choices for high-temperature synchronous machines
- Analytical study of air-gap surface force – application to electrical machines
- High-power density induction machines with increased windings temperature
- Influence of modern magnetic and insulation materials on dimensions and losses of large induction machines
- New emotional model environment for navigation in a virtual reality
- Performance comparison of axial-flux switched reluctance machines with non-oriented and grain-oriented electrical steel rotors
- Erratum
- Erratum to “Conserved vectors with conformable derivative for certain systems of partial differential equations with physical applications”
Articles in the same Issue
- Regular Articles
- Model of electric charge distribution in the trap of a close-contact TENG system
- Dynamics of Online Collective Attention as Hawkes Self-exciting Process
- Enhanced Entanglement in Hybrid Cavity Mediated by a Two-way Coupled Quantum Dot
- The nonlinear integro-differential Ito dynamical equation via three modified mathematical methods and its analytical solutions
- Diagnostic model of low visibility events based on C4.5 algorithm
- Electronic temperature characteristics of laser-induced Fe plasma in fruits
- Comparative study of heat transfer enhancement on liquid-vapor separation plate condenser
- Characterization of the effects of a plasma injector driven by AC dielectric barrier discharge on ethylene-air diffusion flame structure
- Impact of double-diffusive convection and motile gyrotactic microorganisms on magnetohydrodynamics bioconvection tangent hyperbolic nanofluid
- Dependence of the crossover zone on the regularization method in the two-flavor Nambu–Jona-Lasinio model
- Novel numerical analysis for nonlinear advection–reaction–diffusion systems
- Heuristic decision of planned shop visit products based on similar reasoning method: From the perspective of organizational quality-specific immune
- Two-dimensional flow field distribution characteristics of flocking drainage pipes in tunnel
- Dynamic triaxial constitutive model for rock subjected to initial stress
- Automatic target recognition method for multitemporal remote sensing image
- Gaussons: optical solitons with log-law nonlinearity by Laplace–Adomian decomposition method
- Adaptive magnetic suspension anti-rolling device based on frequency modulation
- Dynamic response characteristics of 93W alloy with a spherical structure
- The heuristic model of energy propagation in free space, based on the detection of a current induced in a conductor inside a continuously covered conducting enclosure by an external radio frequency source
- Microchannel filter for air purification
- An explicit representation for the axisymmetric solutions of the free Maxwell equations
- Floquet analysis of linear dynamic RLC circuits
- Subpixel matching method for remote sensing image of ground features based on geographic information
- K-band luminosity–density relation at fixed parameters or for different galaxy families
- Effect of forward expansion angle on film cooling characteristics of shaped holes
- Analysis of the overvoltage cooperative control strategy for the small hydropower distribution network
- Stable walking of biped robot based on center of mass trajectory control
- Modeling and simulation of dynamic recrystallization behavior for Q890 steel plate based on plane strain compression tests
- Edge effect of multi-degree-of-freedom oscillatory actuator driven by vector control
- The effect of guide vane type on performance of multistage energy recovery hydraulic turbine (MERHT)
- Development of a generic framework for lumped parameter modeling
- Optimal control for generating excited state expansion in ring potential
- The phase inversion mechanism of the pH-sensitive reversible invert emulsion from w/o to o/w
- 3D bending simulation and mechanical properties of the OLED bending area
- Resonance overvoltage control algorithms in long cable frequency conversion drive based on discrete mathematics
- The measure of irregularities of nanosheets
- The predicted load balancing algorithm based on the dynamic exponential smoothing
- Influence of different seismic motion input modes on the performance of isolated structures with different seismic measures
- A comparative study of cohesive zone models for predicting delamination fracture behaviors of arterial wall
- Analysis on dynamic feature of cross arm light weighting for photovoltaic panel cleaning device in power station based on power correlation
- Some probability effects in the classical context
- Thermosoluted Marangoni convective flow towards a permeable Riga surface
- Simultaneous measurement of ionizing radiation and heart rate using a smartphone camera
- On the relations between some well-known methods and the projective Riccati equations
- Application of energy dissipation and damping structure in the reinforcement of shear wall in concrete engineering
- On-line detection algorithm of ore grade change in grinding grading system
- Testing algorithm for heat transfer performance of nanofluid-filled heat pipe based on neural network
- New optical solitons of conformable resonant nonlinear Schrödinger’s equation
- Numerical investigations of a new singular second-order nonlinear coupled functional Lane–Emden model
- Circularly symmetric algorithm for UWB RF signal receiving channel based on noise cancellation
- CH4 dissociation on the Pd/Cu(111) surface alloy: A DFT study
- On some novel exact solutions to the time fractional (2 + 1) dimensional Konopelchenko–Dubrovsky system arising in physical science
- An optimal system of group-invariant solutions and conserved quantities of a nonlinear fifth-order integrable equation
- Mining reasonable distance of horizontal concave slope based on variable scale chaotic algorithms
- Mathematical models for information classification and recognition of multi-target optical remote sensing images
- Hopkinson rod test results and constitutive description of TRIP780 steel resistance spot welding material
- Computational exploration for radiative flow of Sutterby nanofluid with variable temperature-dependent thermal conductivity and diffusion coefficient
- Analytical solution of one-dimensional Pennes’ bioheat equation
- MHD squeezed Darcy–Forchheimer nanofluid flow between two h–distance apart horizontal plates
- Analysis of irregularity measures of zigzag, rhombic, and honeycomb benzenoid systems
- A clustering algorithm based on nonuniform partition for WSNs
- An extension of Gronwall inequality in the theory of bodies with voids
- Rheological properties of oil–water Pickering emulsion stabilized by Fe3O4 solid nanoparticles
- Review Article
- Sine Topp-Leone-G family of distributions: Theory and applications
- Review of research, development and application of photovoltaic/thermal water systems
- Special Issue on Fundamental Physics of Thermal Transports and Energy Conversions
- Numerical analysis of sulfur dioxide absorption in water droplets
- Special Issue on Transport phenomena and thermal analysis in micro/nano-scale structure surfaces - Part I
- Random pore structure and REV scale flow analysis of engine particulate filter based on LBM
- Prediction of capillary suction in porous media based on micro-CT technology and B–C model
- Energy equilibrium analysis in the effervescent atomization
- Experimental investigation on steam/nitrogen condensation characteristics inside horizontal enhanced condensation channels
- Experimental analysis and ANN prediction on performances of finned oval-tube heat exchanger under different air inlet angles with limited experimental data
- Investigation on thermal-hydraulic performance prediction of a new parallel-flow shell and tube heat exchanger with different surrogate models
- Comparative study of the thermal performance of four different parallel flow shell and tube heat exchangers with different performance indicators
- Optimization of SCR inflow uniformity based on CFD simulation
- Kinetics and thermodynamics of SO2 adsorption on metal-loaded multiwalled carbon nanotubes
- Effect of the inner-surface baffles on the tangential acoustic mode in the cylindrical combustor
- Special Issue on Future challenges of advanced computational modeling on nonlinear physical phenomena - Part I
- Conserved vectors with conformable derivative for certain systems of partial differential equations with physical applications
- Some new extensions for fractional integral operator having exponential in the kernel and their applications in physical systems
- Exact optical solitons of the perturbed nonlinear Schrödinger–Hirota equation with Kerr law nonlinearity in nonlinear fiber optics
- Analytical mathematical schemes: Circular rod grounded via transverse Poisson’s effect and extensive wave propagation on the surface of water
- Closed-form wave structures of the space-time fractional Hirota–Satsuma coupled KdV equation with nonlinear physical phenomena
- Some misinterpretations and lack of understanding in differential operators with no singular kernels
- Stable solutions to the nonlinear RLC transmission line equation and the Sinh–Poisson equation arising in mathematical physics
- Calculation of focal values for first-order non-autonomous equation with algebraic and trigonometric coefficients
- Influence of interfacial electrokinetic on MHD radiative nanofluid flow in a permeable microchannel with Brownian motion and thermophoresis effects
- Standard routine techniques of modeling of tick-borne encephalitis
- Fractional residual power series method for the analytical and approximate studies of fractional physical phenomena
- Exact solutions of space–time fractional KdV–MKdV equation and Konopelchenko–Dubrovsky equation
- Approximate analytical fractional view of convection–diffusion equations
- Heat and mass transport investigation in radiative and chemically reacting fluid over a differentially heated surface and internal heating
- On solitary wave solutions of a peptide group system with higher order saturable nonlinearity
- Extension of optimal homotopy asymptotic method with use of Daftardar–Jeffery polynomials to Hirota–Satsuma coupled system of Korteweg–de Vries equations
- Unsteady nano-bioconvective channel flow with effect of nth order chemical reaction
- On the flow of MHD generalized maxwell fluid via porous rectangular duct
- Study on the applications of two analytical methods for the construction of traveling wave solutions of the modified equal width equation
- Numerical solution of two-term time-fractional PDE models arising in mathematical physics using local meshless method
- A powerful numerical technique for treating twelfth-order boundary value problems
- Fundamental solutions for the long–short-wave interaction system
- Role of fractal-fractional operators in modeling of rubella epidemic with optimized orders
- Exact solutions of the Laplace fractional boundary value problems via natural decomposition method
- Special Issue on 19th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering
- Joint use of eddy current imaging and fuzzy similarities to assess the integrity of steel plates
- Uncertainty quantification in the design of wireless power transfer systems
- Influence of unequal stator tooth width on the performance of outer-rotor permanent magnet machines
- New elements within finite element modeling of magnetostriction phenomenon in BLDC motor
- Evaluation of localized heat transfer coefficient for induction heating apparatus by thermal fluid analysis based on the HSMAC method
- Experimental set up for magnetomechanical measurements with a closed flux path sample
- Influence of the earth connections of the PWM drive on the voltage constraints endured by the motor insulation
- High temperature machine: Characterization of materials for the electrical insulation
- Architecture choices for high-temperature synchronous machines
- Analytical study of air-gap surface force – application to electrical machines
- High-power density induction machines with increased windings temperature
- Influence of modern magnetic and insulation materials on dimensions and losses of large induction machines
- New emotional model environment for navigation in a virtual reality
- Performance comparison of axial-flux switched reluctance machines with non-oriented and grain-oriented electrical steel rotors
- Erratum
- Erratum to “Conserved vectors with conformable derivative for certain systems of partial differential equations with physical applications”