Article Open Access

Three-dimensional atom localization via probe absorption in a cascade four-level atomic system

  • , and EMAIL logo
Published/Copyright: March 20, 2018
Download Article (PDF)
Open Physics
From the journal Open Physics Volume 16 Issue 1

Abstract

For an atomic system with cascade four-level type, a useful scheme about three-dimensional (3D) atom localization is proposed. In our scheme the atomic system is coherently controlled by using a radio-frequency field to couple with two-folded levels under the condition of the existence of probe absorption. Our results show that detecting precision of 3D atom localization may be obviously improved by properly adjusting the frequency detuning and strength of the radio-frequency driving field. So our scheme could be helpful to realize 3D atom localization with high-efficiency and high-precision . In the field of laser cooling or the atom nano-lithography, our studies provide potential applications.

Keywords: atom localization; probe absorption; coherent manipulation
PACS: 42.50.-p; 42.50.Ct

1 Introduction

With the development of the technology of quantum coherent control, the research about atom localization has developed rapidly, and some researchers pay attention to this physical field. Via manipulation of laser, several pioneering works about atom localization has been proposed, where position of an atom going through a standard light field can be localized by carrying out a phase measurement on a probe field [1, 2, 3], and also be localized by using Ramsey interferometry [4], and other optical methods [5, 6]. Subsequently, in the papers of Zubairy and his coworkers, they have given some rather simple schemes in which they restrict the space of an atomic notion via applying the technology of Autler-Townes microscopy, detecting photons of spontaneous emission, and controlling phase and amplitude of the absorption spectra [7, 8, 9]. In Zubairy’s schemes, spontaneous emission need to be well controlled. We know it is difficult to effectively control spontaneous radiation in experiment, so some other new schemes [10, 11, 12, 13, 14, 15, 16] have been introduced, in which one can obtain atom localization by measuring atomic population of the upperstate or detecting absorption spectra of probe field, and by means of some coherent process, such as coherent population trapping, double-dark resonances, or coherent manipulation of the Raman gain. Besides these works in the field of theory, recently, atom localization in one-dimensional space has been achieved in a proof-of-principle experiment with the help of the technique of electromagnetically induced transparency [17].

Along with deep studies about atom localization, several theoretical schemes about atom localization in two-dimensional space have also been put forward by using two standing-wave light fields whose propagation direction is orthogonal to each other to couple with atomic system. For example, taking a measurement on the atom population of ground state or of upper state, Ivanov’s research group gave a new scheme where they obtained atom localization in two-dimensional space [18]. Later, a number of research papers [19, 20, 21, 22, 23, 24, 25] about atom localization in two-dimensional space have been published successively.

For an atom with motion, researchers prefer to limit its motion in three-dimensional space, so how to realize the atom localization in three-dimensional space begins to be concerned. Several schemes [26, 27, 28] about atom localization in three-dimensional (3D) space in various systems of atom have been reported. However, 3D atom localization based on different coupling mechanisms via taking a measurement on absorption and gain spectrum of the probe field is not considered. In this paper, we study a four-level atomic system with cascade type and we investigate its three-dimensional atom localization through detecting the absorption and gain spectra of the probe field. In our system, interaction between field and atom is dependent on space coordinates, so we can use the technology of detecting probe absorption and gain spectra to determine the position probability distribution of the atoms when they go through standing waves field. There are two channels of excitation in the closed interacting system: one is one-photon excitation and the other is three-photon excitation that depends on phase, and the quantum interference between two channels helps in achieving 3D atom localization. Through measuring absorption of probe field or its gain at a special frequency, we can find atom with 100% probability in three-dimensional space. By contrast with some schemes introduced in references [26, 27, 28], our scheme is added by a factor of 4 or 8.

2 The physical model and dynamic evolution

An atomic system with four cascade energy levels is studied and its concrete atomic structures are shown in Figure 1. State |1〉 is a ground state, |2〉 is an intermediate state, and the top two states |3〉 and |4〉 are two-folded levels. Where we use three standing-wave fields those are orthogonal to each other and whose Rabi frequency 2Ω(j)sin (kj) (j = x, y, z; k = ω/c) depends on position to couple with the transition between levels |2〉 and |3〉, and the total Rabi frequency 2Ωs(x,y,z) may be expressed as 2Ωs(x,y,z) = 2Ω(x)sin(kx)+2Ω(y)sin(ky)+2Ω(z)sin(kz). A weak probe field with angular frequency ωp and Rabi frequency 2Ωp interacts with the atomic system and excites the transition between levels |2〉 and |1〉. A radio-frequency field with angular frequency ωrf and Larmor frequency 2Ωrf is applied to drive transition between the two-folded levels |3〉 and |4〉.

Figure 1 Schematic diagram of a four-level atomic system
Figure 1

Schematic diagram of a four-level atomic system

Here we neglect the kinetic part of the atom from the Hamiltonian according to the Raman-Nath approximation, and suppose that the center-of-mass coordinate of the atom almost does not change with time along with the directions of the laser when the intensity of Rabi frequency of the laser field is big enough. Under the condition of rotation wave approximation, the interaction Hamiltonian of this system is given by

HI=Δxyz+Δp33+Δp22+Δrf+Δxyz+Δp44−(Ωsx,y,z32+Ωp21+Ωrf43+H.c.),(1)

where we let ħ=0, Δrf=ω43−ωrf, Δxyz=ω32−ωxyz, and Δp=ω21−ωp are corresponding to detuning of the radio-frequency field, the standing-wave field and the probe field, respectively, and ω43, ω32, and ω21 are corresponding to transition frequency between levels |4〉 and |3〉, between levels |3〉 and |2〉, and between levels |2〉 and |1〉, respectively.

According to the equation satisfied by the evolution of density matrix elements

∂ρmn∂t=1iℏ∑kHmkρkn−ρmkHkn−12∑kΓmkρkn+ρmkΓkn,(k=1,2,3,4)(2)

where Γmn stands for relaxation matrix elements, and it can be expressed as 〈n|Γ|m〉=γnδnm, and γn is the decay rate of level |n〉. Based on Eqs. (1) and (2), we can obtain the first derivative of density matrix elements with time:

∂ρ11∂t=γ2ρ22−iΩpρ12+iΩp∗ρ21,(3a)
∂ρ22∂t=−γ2ρ22+γ3ρ33+γ4ρ44+iΩpρ12−iΩp∗ρ21−iΩsx,y,zρ23+iΩs∗(x,y,z)ρ32,(3b)
∂ρ33∂t=−γ3ρ33+iΩrf∗ρ43−iΩrfρ34+iΩsx,y,zρ23−iΩs∗(x,y,z)ρ32,(3c)
∂ρ44∂t=−γ4ρ44+iΩrfρ34−iΩrf∗ρ43,(3d)
∂ρ21∂t=−γ22+iΔpρ21+iΩs∗x,y,zρ31−iΩp(ρ22−ρ11),(3e)
∂ρ31∂t=−γ32+iΔxyz+Δpρ31+iΩsx,y,zρ21+iΩrf∗ρ41−iΩpρ32,(3f)
∂ρ41∂t=−γ42+iΔxyz+Δp+Δrfρ41+iΩrfρ31−iΩpρ42,(3g)
∂ρ32∂t=−γ2+γ32+iΔxyzρ32+iΩrf∗ρ42−iΩp∗ρ31−iΩs(x,y,z)(ρ33−ρ22),(3h)
∂ρ42∂t=−γ2+γ42+iΔxyz+Δrfρ42+iΩrfρ32−iΩp∗ρ41−iΩs(x,y,z)ρ43,(3i)
∂ρ43∂t=−γ3+γ42+iΔrfρ43+iΩrf(ρ33−ρ44)−iΩs∗(x,y,z)ρ42,(3j)

where ρ11+ρ22+ρ33+ρ44=1, γ2, γ3 and γ4 are decay rates for |2〉→|1〉, |3〉→|2〉and |4〉→|2〉, respectively. Based on the theory of light propagating in atomic medium, we get the expression of the complex susceptibility for the probe field

χp=Nμ212ϵ0ℏΩpρ21(4)

where physical parameter ε0 is the free space permittivity and N is the atom number density of four-level atomic system.

According to the theory about light propagating in medium, we know the imaginary part Im(χp) of the susceptibility can be applied to describe absorption of probe field. To simplify the formula, we let δ2= γ22 +iΔp, δ3= γ32 +i(Δxyz+Δp), and δ4= γ42 +i(Δxyz+Δp+Δrf). So from Eqs. (3) and (4), the expression about Im(χp) is given by

Imχp=Imδ3δ4+Ωrf2δ2Ωrf2+δ4Ωs2x,y,z+δ4δ3δ2i=Aγ4γ34−Δ4Δ3+Ωrf2−B(γ4Δ32+γ3Δ42)A2+B2(5)

where

Δ3=Δxyz+Δp,

Δ4=Δp+Δrf+Δxyz,

Δ3=Δxyz+Δp,Δ4=Δp+Δrf+Δxyz,A=(γ4Ωs2x,y,z+γ2Ωrf2−γ4ΔpΔ3−Δ3Δ4γ2−Δ4Δpγ3+γ4γ3γ24)/2,B=Δ4Ωs2x,y,z+ΔpΩrf2−Δ4Δ3Δp+(Δ3γ2γ4+Δpγ3γ4+Δ4γ3γ2)/4.

Eq. (5) tells us that the imaginary part Im(χp) depends on not only space coordinates (x,y,z) and the detunings Δp, Δxyz, Δrf between natural frequency of atom and light fields, but also the Rabi frequencies Ωrf and Ωs(x,y,z). Accordingly, we can use absorption of the probe field to detect distribution of atoms in space. In the process of numerical calculations, we will determine probe absorption Im(ρ21/Ωp) and measure the probe absorption depending on space position. Then informations about the atomic space distribution are obtained, and finally realize atom localization in three dimensional. Through choosing appropriate parameters of system, we can control the localization behavior of the atom in 3D space and improve the precision of detection of atomic position.

3 Localization structures

In this section, we will give some results of numerical calculations based on the imaginary part of the probe absorption under the condition of choosing different parameters of the system. Numerical analyses show measuring probe absorption can help one to achieve high-efficiency and high-precision 3D atom localization under the condition of choices of appropriate parameters. In the following process of numerical calculations, we keep γ2, γ3, and γ4 at the same values. Here, an atomic structure can be realized in cold 87Rb atoms using the transitions 5S1/2 − 5P1/2 − 5D3/2. In our system, the selections of atomic levels are: |1〉 = |5S1/2,F = 2〉, let |5P1/2,F = 2〉 = |2〉, |5D3/2,F = 1〉is set to |3〉, and |5D3/2,F = 2〉 is arranged as level |4〉. In this real atomic system, the decay rates γ2 = 5.3Mhz and γ3 = γ4 = 0.67Mhz, respectively.

First of all, when the detuning of the probe field has different values, we consider the influence of the absorption of probe field Im(χp) along with the position (kx, ky, kz). Numerical analyses are shown In Figure 2. From this figure, we can see that, when we vary Δp, the precision of the 3D localization changes a lot. When Δp = 5γ2, space distribution of the absorption of the probe field only presents one large sphere in the coordinate space (−1≤kj/Π≤1, j = x, y, z) see Figure 2(a), which means that the possibility of detecting the atom can reach 1 in this space but with low precision. In the cases that Δp = 5.5γ2 (Figure 2(b)) and Δp = 6γ2 (Figure 2(c)), the spheres become more and more smaller. We continue to increase the value of Δp until detuning Δp = 6.5γ2 (Figure 2(d)], the sphere occupies a very small volume in space becomes very small, and here our spatial resolution is about 0.1λ. From Figure 2(d), we find we only carry out measurement on absorption of probe field in a very small space, that is position of atoms is confined in this narrow space. Figure 2 shows that the precision of detecting position of atoms can be improved if we increase gradually the value of detuning of weak probe light. We can use the quantum coherence to explain the phenomenon of atom localization. Under the quantum coherent manipulation, one can build a quantum correlation between the detuning and absorption for the weak probe light. This type of strong correlation evidently affects the properties of absorption of medium when changing the detuning of the weak probe field, and then distribution of absorption of probe light in three-dimensional space will be influenced. So choosing appropriate parameters and by means of quantum coherence, various structure diagrams about atom localization in three-dimensional space are obtained in Figure 2.

Figure 2 Iso-surfaces for the probe absorptionIm(χ) = 0.1versus position (−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values of Δp: (a) Δp = 5γ2 (b) Δp = 5.5γ2, (c) Δp = 6γ2, and (d) Δp = 6.5γ2, While the other parameters are N|μ21|2/ε0ħ = 1, Δxyz = 0, Δrf = 0.5γ2, Ωp = 0.2γ2, Ωrf = γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz
Figure 2

Iso-surfaces for the probe absorptionIm(χ) = 0.1versus position (−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values of Δp: (a) Δp = 5γ2 (b) Δp = 5.5γ2, (c) Δp = 6γ2, and (d) Δp = 6.5γ2, While the other parameters are N|μ21|2/ε0ħ = 1, Δxyz = 0, Δrf = 0.5γ2, Ωp = 0.2γ2, Ωrf = γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz

Numerical results about atom localization in three-dimensional space is shown in Figure 3 when we consider the case with changing detuning of standing-wave field Δxyz. Firstly we let Δxyz=γ2, and structure diagram about distribution of the probe absorption is plotted in the three-dimensional space (−1≤kj/Π≤1, j=x, y, z) [see Figure 3(a)]. The shape of structure diagram is a sphere and its volume is biggest in Figure 3, which means we do not obtain atom localization. Next, we increase the values of Δxyz, and its values are set to be 2γ2 [Figure 3(b)] and 4γ2 [Figure 3(c)], respectively. we can still plot a sphere in the three-dimensional space. However, comparing with Figure 3(a), the size of spheres grow smaller. Which means, increasing the detuning of standing-wave field, the probability of detecting the atom can approach 1 all the time and the precision has been improved. When values of Δxyz reaches 5γ2 [Figure 3(d)], a very small sphere appears in the whole three-dimensional space, that is motion of atoms is confined in the tight range. Here the spatial resolution is still about 0.1λ, so atom localization in three-dimensional is realized with high probability and high precision.

Figure 3 Iso-surfaces for the probe absorption Im(χ) = 0.1versus position (−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values of Δxyz: (a)Δxyz = γ2, (b)Δxyz = 2γ2, (c)Δxyz = 4γ2, and (d)Δxyz = 5γ2, while the other parameters are N|μ21|2/ε0ħ = 1, Δp = 4γ2,\ Δrf = 0.5γ2,Ωp = 0.2γ2, Ωrf = γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz
Figure 3

Iso-surfaces for the probe absorption Im(χ) = 0.1versus position (−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values of Δxyz: (a)Δxyz = γ2, (b)Δxyz = 2γ2, (c)Δxyz = 4γ2, and (d)Δxyz = 5γ2, while the other parameters are N|μ21|2/ε0ħ = 1, Δp = 4γ2,\ Δrf = 0.5γ2,Ωp = 0.2γ2, Ωrf = γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz

In this paper, a cascade four-level atom is considered, and its top two levels are fine structures and can be treated as two-folded levels. The coupling between two-folded levels can be carried out with the help of radio-frequency driving field or a microwave field. Here we use radio-frequency. Relative to a laser field, radio-frequency source has some advantages such as easy to control and easy to adjust. In final part of this paper, we numerically analyze how the intensity of radio-frequency field affect atom localization in the three-dimensional space. Here we only adjust Larmor frequency Ωrf of radio-frequency field and fix values of other parameters. When the Ωrf = γ2, we can see a small sphere in the three-dimensional space (−1 ≤ kj/Π ≤ 1, j = x, y, z) [see Figure 4(a)]. Going on changing the value ofΩrf and letting its values equal to 3γ2 and 5γ2, respectively, there is remain only one sphere, respectively showed in Figure 4(b) and Figure 4(c), in each space but its size is getting bigger and bigger. When the value of Larmor frequency Ωrf continues to be increased and reaches 6γ2, we get a bigger sphere in three-dimensional space, and it is the biggest sphere in Figure 4, which means the precision of the localization becomes low step by step with increasing the intensity of radio-frequency field. So if we want to realize achieve the three-dimensional atom localization with high precision and high efficiency, choices of intensity of radio-frequency field needs to be carefully considered and we should keep it with an appropriate value.

Figure 4 Iso-surfaces for the probe absorption Im(χ) = 0.1versus position(−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values ofΩrf (a) Ωrf = γ2, (b) Ωrf = 3γ2, (c) Ωrf = 5γ2, and (d) Ωrf = 6γ2 while the other parameters are N|μ21|2/ε0ħ = 1 Δp = 4.5γ2, Δxyz = 4γ2,Δrf = γ2, Ωp = 0.2γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz
Figure 4

Iso-surfaces for the probe absorption Im(χ) = 0.1versus position(−1 ≤ kj/Π ≤ 1, j = x, y, z) for different values ofΩrf (a) Ωrf = γ2, (b) Ωrf = 3γ2, (c) Ωrf = 5γ2, and (d) Ωrf = 6γ2 while the other parameters are N|μ21|2/ε0ħ = 1 Δp = 4.5γ2, Δxyz = 4γ2,Δrf = γ2, Ωp = 0.2γ2, γ2 ≌ 5.3Mhz, γ3 ≌ 0.67Mhz, γ4 ≌ 0.67Mhz

4 Conclusion

To sum up, through detecting the size of spatial region of probe absorption, the three-dimensional atom localization in a coherently driven atomic system with cascade four levels is investigated in detail. Through analyzing situations with different physical parameters, we find one can significantly improve the precision and efficiency of atom localization in three-dimensional space under the condition with appropriate physical parameters. Our results show that we can confine the motion of atom in a narrow space, and we can find atom in this region with 100% probability. Our scheme is more precise than that in other research [28]. In our atomic system, we use a radio-frequency field to couple with a transition between two hyperfine levels, and numerical results show weak radio-frequency field can help us to get efficient 3D atom localization. Compared with laser, the radio-frequency is easier to operate in experiment, so our scheme has feasibility in the experiment. In addition, atom localization with high precision and high efficiency has some potential practical value in some fields such as atom lithography, laser cooling and so on.

Acknowledgement

This work is supported by the National Natural Science Foundation of China (Grant Nos. 11365009 and 11775190), and by Science Foundation of Zhejiang SCI-TECH University under Grant No. 17062071-Y.

References

[1] Storey P., Collett M., Walls D., Measurement-induced diffraction and interference of atoms, Phys. Rev. Lett. 2007, 68, 472.10.1103/PhysRevLett.68.472Search in Google Scholar PubMed

[2] Kunze S., Dieckmann K., Rempe G., Diffraction of atoms from a measurement induced grating, Phys. Rev. Lett. 1997, 78, 2038.10.1103/PhysRevLett.78.2038Search in Google Scholar

[3] Quadt R., Collett M., Walls D.F., Measurement of atomic motion in a standing light field by homodyne detection, Phys. Rev. Lett., 1995, 74, 351.10.1103/PhysRevLett.74.351Search in Google Scholar PubMed

[4] Kien F.L., Rempe G., Schleich W.P., Zubairy M.S., Atom localization via ramsey interferometry: a coherent cavity field provides a better resolution, Phys. Rev. A, 1997, 56, 2972.10.1103/PhysRevA.56.2972Search in Google Scholar

[5] Thomas J. E., Uncertainty-limited position measurement of moving atoms using optical fields, Opt. Lett., 1989, 14,1186.10.1364/OL.14.001186Search in Google Scholar PubMed

[6] Stokes K.D., Schnurr C., Gardner J.R., Marable M., Welch G.R., Thomas J. E., Precision position measurement of moving atoms using optical fields, Phys. Rev. Lett., 1991, 67, 1997.10.1103/PhysRevLett.67.1997Search in Google Scholar PubMed

[7] Qamar S., Zhu S.Y., Zubairy M.S., Precision localization of single atom using Autler–Townes microscopy, Opt. Commun., 2000, 176, 409.10.1016/S0030-4018(00)00535-6Search in Google Scholar

[8] Qamar S., Zhu S.Y., Zubairy M.S., Atom localization via resonance fluorescence, Phys. Rev. A, 2000, 61, 063806.10.1103/PhysRevA.61.063806Search in Google Scholar

[9] Sahrai M., Tajalli H., Kapale K. T., Zubairy M. S., Subwavelength atom localization via amplitude and phase control of the absorption spectrum Phys. Rev. A, 2005, 72, 013820.10.1103/PhysRevA.72.013820Search in Google Scholar

[10] Paspalakis E., Knight P.L., Localizing an atom via quantum interference, Phys. Rev. A, 2001, 63, 065802.10.1103/PhysRevA.63.065802Search in Google Scholar

[11] Kapale K.T., Zubairy M.S., Subwavelength atom localization via amplitude and phase control of the absorption spectrum. II, Phys. Rev. A, 2006, 73, 023813.10.1103/PhysRevA.73.023813Search in Google Scholar

[12] Liu C.P., Gong S.Q., Cheng D.C., Fan X.J., Xu Z.Z., Atom localization via interference of dark resonances, Phys. Rev. A 2006, 73, 025801.10.1103/PhysRevA.73.025801Search in Google Scholar

[13] Xu J., Hu X. M., Sub-half-wavelength atom localization via phase control of a pair of bichromatic fields, Phys. Rev. A, 2007, 76, 013830.10.1103/PhysRevA.76.013830Search in Google Scholar

[14] Agarwal G.S., Kapale K.T., Subwavelength atom localization via coherent population trapping, J. Phys. B: At. Mol. Opt. Phys., 2006, 39, 3437.10.1088/0953-4075/39/17/002Search in Google Scholar

[15] Macovei M., Evers J., Keitel C.H., Zubairy M.S., Localization of atomic ensembles via superfluorescence, Phys. Rev. A, 2007, 75, 033801.10.1103/PhysRevA.75.033801Search in Google Scholar

[16] Qamar S., Mehmood A., Qamar S., Subwavelength atom localization via coherent manipulation of the Raman gain process, Phys. Rev. A, 2009, 79, 033848.10.1103/PhysRevA.79.033848Search in Google Scholar

[17] Proite N.A., Simmons Z.J., Yavuz D.D., Observation of atomic localization using electromagnetically induced transparency, Phys. Rev. A, 2011, 83, 041803.10.1103/PhysRevA.83.041803Search in Google Scholar

[18] Ivanov V., Rozhdestvensky Y., Two-dimensional atom localization in a four-level tripod system in laser fields Phys. Rev. A, 2010, 81, 033809.10.1103/PhysRevA.81.033809Search in Google Scholar

[19] Li J.H., Yu R., Liu M., Ding C.L., Yang X.X., Efficient two-dimensional atom localization via phase-sensitive absorption spectrum in a radio-frequency-driven four-level atomic system, Phys. Lett. A, 2011, 375, 3978.10.1016/j.physleta.2011.09.027Search in Google Scholar

[20] Jin L.L., Sun H., Niu Y.P., Jin S.Q., Gong S.Q., Two-dimension atom nano-lithograph via atom localization, J. Mod. Opt., 2009, 56, 805.10.1080/09500340802267134Search in Google Scholar

[21] Ding C.L., Li J.H., Zhan Z.M., Yang X.X., Two-dimensional atom localization via spontaneous emission in a coherently driven five-level M-type atomic system, Phys. Rev. A, 2011, 83, 063834.10.1103/PhysRevA.83.063834Search in Google Scholar

[22] Ding C.L., Li J.H., Yang X.X., Zhang D., Xiong H., Proposal for efficient two-dimensional atom localization using probe absorption in a microwave-driven four-level atomic system, Phys. Rev. A, 2011, 84, 043840.10.1103/PhysRevA.84.043840Search in Google Scholar

[23] Wan R.G., Zhang T.Y., Kou J., Two-dimensional sub-half-wavelength atom localization via phase control of absorption and gain, Phys. Rev. A, 2013, 87, 043816.10.1103/PhysRevA.87.043816Search in Google Scholar

[24] Rahmatullah, Qamar S., Two-dimensional atom localization via probe-absorption spectrum, Phys. Rev. A, 2013, 88, 013846.10.1103/PhysRevA.88.013846Search in Google Scholar

[25] Rahmatullah, Qamar S., Two-dimensional atom localization via Raman-driven coherence, Phys. Lett. A, 2014, 378, 684.10.1016/j.physleta.2013.12.025Search in Google Scholar

[26] Wang Z., Chen J., Yu B., High-dimensional atom localization via spontaneously generated coherence in a microwave-driven atomic system, Opt. Express, 2017, 25,3358.10.1364/OE.25.003358Search in Google Scholar PubMed

[27] Ivanov V.S., Rozhdestvensky Y.V., Suominen K., Three-dimensional atom localization by laser fields in a four-level tripod syste, Phys. Rev. A, 2014, 90, 063802.10.1103/PhysRevA.90.063802Search in Google Scholar

[28] Zhu Z., Yang W.X., Xie X.T., Liu S., Lee R.K., Three-dimensional atom localization from spatial interference in a double two-level atomic system, Phys. Rev. A, 2016, 94, 013826.10.1103/PhysRevA.94.013826Search in Google Scholar

Received: 2017-09-10
Accepted: 2018-02-05
Published Online: 2018-03-20

© 2018 W. Zeng et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Articles in the same Issue

  1. Regular Articles
  2. A modified Fermi-Walker derivative for inextensible flows of binormal spherical image
  3. Algebraic aspects of evolution partial differential equation arising in the study of constant elasticity of variance model from financial mathematics
  4. Three-dimensional atom localization via probe absorption in a cascade four-level atomic system
  5. Determination of the energy transitions and half-lives of Rubidium nuclei
  6. Three phase heat and mass transfer model for unsaturated soil freezing process: Part 1 - model development
  7. Three phase heat and mass transfer model for unsaturated soil freezing process: Part 2 - model validation
  8. Mathematical model for thermal and entropy analysis of thermal solar collectors by using Maxwell nanofluids with slip conditions, thermal radiation and variable thermal conductivity
  9. Constructing analytic solutions on the Tricomi equation
  10. Feynman diagrams and rooted maps
  11. New type of chaos synchronization in discrete-time systems: the F-M synchronization
  12. Unsteady flow of fractional Oldroyd-B fluids through rotating annulus
  13. A note on the uniqueness of 2D elastostatic problems formulated by different types of potential functions
  14. On the conservation laws and solutions of a (2+1) dimensional KdV-mKdV equation of mathematical physics
  15. Computational methods and traveling wave solutions for the fourth-order nonlinear Ablowitz-Kaup-Newell-Segur water wave dynamical equation via two methods and its applications
  16. Siewert solutions of transcendental equations, generalized Lambert functions and physical applications
  17. Numerical solution of mixed convection flow of an MHD Jeffery fluid over an exponentially stretching sheet in the presence of thermal radiation and chemical reaction
  18. A new three-dimensional chaotic flow with one stable equilibrium: dynamical properties and complexity analysis
  19. Dynamics of a dry-rebounding drop: observations, simulations, and modeling
  20. Modeling the initial mechanical response and yielding behavior of gelled crude oil
  21. Lie symmetry analysis and conservation laws for the time fractional simplified modified Kawahara equation
  22. Solitary wave solutions of two KdV-type equations
  23. Applying industrial tomography to control and optimization flow systems
  24. Reconstructing time series into a complex network to assess the evolution dynamics of the correlations among energy prices
  25. An optimal solution for software testing case generation based on particle swarm optimization
  26. Optimal system, nonlinear self-adjointness and conservation laws for generalized shallow water wave equation
  27. Alternative methods for solving nonlinear two-point boundary value problems
  28. Global model simulation of OH production in pulsed-DC atmospheric pressure helium-air plasma jets
  29. Experimental investigation on optical vortex tweezers for microbubble trapping
  30. Joint measurements of optical parameters by irradiance scintillation and angle-of-arrival fluctuations
  31. M-polynomials and topological indices of hex-derived networks
  32. Generalized convergence analysis of the fractional order systems
  33. Porous flow characteristics of solution-gas drive in tight oil reservoirs
  34. Complementary wave solutions for the long-short wave resonance model via the extended trial equation method and the generalized Kudryashov method
  35. A Note on Koide’s Doubly Special Parametrization of Quark Masses
  36. On right-angled spherical Artin monoid of type Dn
  37. Gas flow regimes judgement in nanoporous media by digital core analysis
  38. 4 + n-dimensional water and waves on four and eleven-dimensional manifolds
  39. Stabilization and Analytic Approximate Solutions of an Optimal Control Problem
  40. On the equations of electrodynamics in a flat or curved spacetime and a possible interaction energy
  41. New prediction method for transient productivity of fractured five-spot patterns in low permeability reservoirs at high water cut stages
  42. The collinear equilibrium points in the restricted three body problem with triaxial primaries
  43. Detection of the damage threshold of fused silica components and morphologies of repaired damage sites based on the beam deflection method
  44. On the bivariate spectral quasi-linearization method for solving the two-dimensional Bratu problem
  45. Ion acoustic quasi-soliton in an electron-positron-ion plasma with superthermal electrons and positrons
  46. Analysis of projectile motion in view of conformable derivative
  47. Computing multiple ABC index and multiple GA index of some grid graphs
  48. Terahertz pulse imaging: A novel denoising method by combing the ant colony algorithm with the compressive sensing
  49. Characteristics of microscopic pore-throat structure of tight oil reservoirs in Sichuan Basin measured by rate-controlled mercury injection
  50. An activity window model for social interaction structure on Twitter
  51. Transient thermal regime trough the constitutive matrix applied to asynchronous electrical machine using the cell method
  52. On the zagreb polynomials of benzenoid systems
  53. Integrability analysis of the partial differential equation describing the classical bond-pricing model of mathematical finance
  54. The Greek parameters of a continuous arithmetic Asian option pricing model via Laplace Adomian decomposition method
  55. Quantifying the global solar radiation received in Pietermaritzburg, KwaZulu-Natal to motivate the consumption of solar technologies
  56. Sturm-Liouville difference equations having Bessel and hydrogen atom potential type
  57. Study on the response characteristics of oil wells after deep profile control in low permeability fractured reservoirs
  58. Depiction and analysis of a modified theta shaped double negative metamaterial for satellite application
  59. An attempt to geometrize electromagnetism
  60. Structure of traveling wave solutions for some nonlinear models via modified mathematical method
  61. Thermo-convective instability in a rotating ferromagnetic fluid layer with temperature modulation
  62. Construction of new solitary wave solutions of generalized Zakharov-Kuznetsov-Benjamin-Bona-Mahony and simplified modified form of Camassa-Holm equations
  63. Effect of magnetic field and heat source on Upper-convected-maxwell fluid in a porous channel
  64. Physical cues of biomaterials guide stem cell fate of differentiation: The effect of elasticity of cell culture biomaterials
  65. Shooting method analysis in wire coating withdrawing from a bath of Oldroyd 8-constant fluid with temperature dependent viscosity
  66. Rank correlation between centrality metrics in complex networks: an empirical study
  67. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering
  68. Modeling of electric and heat processes in spot resistance welding of cross-wire steel bars
  69. Dynamic characteristics of triaxial active control magnetic bearing with asymmetric structure
  70. Design optimization of an axial-field eddy-current magnetic coupling based on magneto-thermal analytical model
  71. Thermal constitutive matrix applied to asynchronous electrical machine using the cell method
  72. Temperature distribution around thin electroconductive layers created on composite textile substrates
  73. Model of the multipolar engine with decreased cogging torque by asymmetrical distribution of the magnets
  74. Analysis of spatial thermal field in a magnetic bearing
  75. Use of the mathematical model of the ignition system to analyze the spark discharge, including the destruction of spark plug electrodes
  76. Assessment of short/long term electric field strength measurements for a pilot district
  77. Simulation study and experimental results for detection and classification of the transient capacitor inrush current using discrete wavelet transform and artificial intelligence
  78. Magnetic transmission gear finite element simulation with iron pole hysteresis
  79. Pulsed excitation terahertz tomography – multiparametric approach
  80. Low and high frequency model of three phase transformer by frequency response analysis measurement
  81. Multivariable polynomial fitting of controlled single-phase nonlinear load of input current total harmonic distortion
  82. Optimal design of a for middle-low-speed maglev trains
  83. Eddy current modeling in linear and nonlinear multifilamentary composite materials
  84. The visual attention saliency map for movie retrospection
  85. AC/DC current ratio in a current superimposition variable flux reluctance machine
  86. Influence of material uncertainties on the RLC parameters of wound inductors modeled using the finite element method
  87. Cogging force reduction in linear tubular flux switching permanent-magnet machines
  88. Modeling hysteresis curves of La(FeCoSi)13 compound near the transition point with the GRUCAD model
  89. Electro-magneto-hydrodynamic lubrication
  90. 3-D Electromagnetic field analysis of wireless power transfer system using K computer
  91. Simplified simulation technique of rotating, induction heated, calender rolls for study of temperature field control
  92. Design, fabrication and testing of electroadhesive interdigital electrodes
  93. A method to reduce partial discharges in motor windings fed by PWM inverter
  94. Reluctance network lumped mechanical & thermal models for the modeling and predesign of concentrated flux synchronous machine
  95. Special Issue Applications of Nonlinear Dynamics
  96. Study on dynamic characteristics of silo-stock-foundation interaction system under seismic load
  97. Microblog topic evolution computing based on LDA algorithm
  98. Modeling the creep damage effect on the creep crack growth behavior of rotor steel
  99. Neighborhood condition for all fractional (g, f, n′, m)-critical deleted graphs
  100. Chinese open information extraction based on DBMCSS in the field of national information resources
  101. 10.1515/phys-2018-0079
  102. CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile
  103. Intelligent Monitoring Network Construction based on the utilization of the Internet of things (IoT) in the Metallurgical Coking Process
  104. Temperature detection technology of power equipment based on Fiber Bragg Grating
  105. Research on a rotational speed control strategy of the mandrel in a rotary steering system
  106. Dynamic load balancing algorithm for large data flow in distributed complex networks
  107. Super-structured photonic crystal fiber Bragg grating biosensor image model based on sparse matrix
  108. Fractal-based techniques for physiological time series: An updated approach
  109. Analysis of the Imaging Characteristics of the KB and KBA X-ray Microscopes at Non-coaxial Grazing Incidence
  110. Application of modified culture Kalman filter in bearing fault diagnosis
  111. Exact solutions and conservation laws for the modified equal width-Burgers equation
  112. On topological properties of block shift and hierarchical hypercube networks
  113. Elastic properties and plane acoustic velocity of cubic Sr2CaMoO6 and Sr2CaWO6 from first-principles calculations
  114. A note on the transmission feasibility problem in networks
  115. Ontology learning algorithm using weak functions
  116. Diagnosis of the power frequency vacuum arc shape based on 2D-PIV
  117. Parametric simulation analysis and reliability of escalator truss
  118. A new algorithm for real economy benefit evaluation based on big data analysis
  119. Synergy analysis of agricultural economic cycle fluctuation based on ant colony algorithm
  120. Multi-level encryption algorithm for user-related information across social networks
  121. Multi-target tracking algorithm in intelligent transportation based on wireless sensor network
  122. Fast recognition method of moving video images based on BP neural networks
  123. Compressed sensing image restoration algorithm based on improved SURF operator
  124. Design of load optimal control algorithm for smart grid based on demand response in different scenarios
  125. Face recognition method based on GA-BP neural network algorithm
  126. Optimal path selection algorithm for mobile beacons in sensor network under non-dense distribution
  127. Localization and recognition algorithm for fuzzy anomaly data in big data networks
  128. Urban road traffic flow control under incidental congestion as a function of accident duration
  129. Optimization design of reconfiguration algorithm for high voltage power distribution network based on ant colony algorithm
  130. Feasibility simulation of aseismic structure design for long-span bridges
  131. Construction of renewable energy supply chain model based on LCA
  132. The tribological properties study of carbon fabric/ epoxy composites reinforced by nano-TiO2 and MWNTs
  133. A text-Image feature mapping algorithm based on transfer learning
  134. Fast recognition algorithm for static traffic sign information
  135. Topical Issue: Clean Energy: Materials, Processes and Energy Generation
  136. An investigation of the melting process of RT-35 filled circular thermal energy storage system
  137. Numerical analysis on the dynamic response of a plate-and-frame membrane humidifier for PEMFC vehicles under various operating conditions
  138. Energy converting layers for thin-film flexible photovoltaic structures
  139. Effect of convection heat transfer on thermal energy storage unit
https://doi.org/10.1515/phys-2018-0009
Keywords for this article
atom localization; probe absorption; coherent manipulation
Creative Commons
BY-NC-ND 4.0

Articles in the same Issue

  1. Regular Articles
  2. A modified Fermi-Walker derivative for inextensible flows of binormal spherical image
  3. Algebraic aspects of evolution partial differential equation arising in the study of constant elasticity of variance model from financial mathematics
  4. Three-dimensional atom localization via probe absorption in a cascade four-level atomic system
  5. Determination of the energy transitions and half-lives of Rubidium nuclei
  6. Three phase heat and mass transfer model for unsaturated soil freezing process: Part 1 - model development
  7. Three phase heat and mass transfer model for unsaturated soil freezing process: Part 2 - model validation
  8. Mathematical model for thermal and entropy analysis of thermal solar collectors by using Maxwell nanofluids with slip conditions, thermal radiation and variable thermal conductivity
  9. Constructing analytic solutions on the Tricomi equation
  10. Feynman diagrams and rooted maps
  11. New type of chaos synchronization in discrete-time systems: the F-M synchronization
  12. Unsteady flow of fractional Oldroyd-B fluids through rotating annulus
  13. A note on the uniqueness of 2D elastostatic problems formulated by different types of potential functions
  14. On the conservation laws and solutions of a (2+1) dimensional KdV-mKdV equation of mathematical physics
  15. Computational methods and traveling wave solutions for the fourth-order nonlinear Ablowitz-Kaup-Newell-Segur water wave dynamical equation via two methods and its applications
  16. Siewert solutions of transcendental equations, generalized Lambert functions and physical applications
  17. Numerical solution of mixed convection flow of an MHD Jeffery fluid over an exponentially stretching sheet in the presence of thermal radiation and chemical reaction
  18. A new three-dimensional chaotic flow with one stable equilibrium: dynamical properties and complexity analysis
  19. Dynamics of a dry-rebounding drop: observations, simulations, and modeling
  20. Modeling the initial mechanical response and yielding behavior of gelled crude oil
  21. Lie symmetry analysis and conservation laws for the time fractional simplified modified Kawahara equation
  22. Solitary wave solutions of two KdV-type equations
  23. Applying industrial tomography to control and optimization flow systems
  24. Reconstructing time series into a complex network to assess the evolution dynamics of the correlations among energy prices
  25. An optimal solution for software testing case generation based on particle swarm optimization
  26. Optimal system, nonlinear self-adjointness and conservation laws for generalized shallow water wave equation
  27. Alternative methods for solving nonlinear two-point boundary value problems
  28. Global model simulation of OH production in pulsed-DC atmospheric pressure helium-air plasma jets
  29. Experimental investigation on optical vortex tweezers for microbubble trapping
  30. Joint measurements of optical parameters by irradiance scintillation and angle-of-arrival fluctuations
  31. M-polynomials and topological indices of hex-derived networks
  32. Generalized convergence analysis of the fractional order systems
  33. Porous flow characteristics of solution-gas drive in tight oil reservoirs
  34. Complementary wave solutions for the long-short wave resonance model via the extended trial equation method and the generalized Kudryashov method
  35. A Note on Koide’s Doubly Special Parametrization of Quark Masses
  36. On right-angled spherical Artin monoid of type Dn
  37. Gas flow regimes judgement in nanoporous media by digital core analysis
  38. 4 + n-dimensional water and waves on four and eleven-dimensional manifolds
  39. Stabilization and Analytic Approximate Solutions of an Optimal Control Problem
  40. On the equations of electrodynamics in a flat or curved spacetime and a possible interaction energy
  41. New prediction method for transient productivity of fractured five-spot patterns in low permeability reservoirs at high water cut stages
  42. The collinear equilibrium points in the restricted three body problem with triaxial primaries
  43. Detection of the damage threshold of fused silica components and morphologies of repaired damage sites based on the beam deflection method
  44. On the bivariate spectral quasi-linearization method for solving the two-dimensional Bratu problem
  45. Ion acoustic quasi-soliton in an electron-positron-ion plasma with superthermal electrons and positrons
  46. Analysis of projectile motion in view of conformable derivative
  47. Computing multiple ABC index and multiple GA index of some grid graphs
  48. Terahertz pulse imaging: A novel denoising method by combing the ant colony algorithm with the compressive sensing
  49. Characteristics of microscopic pore-throat structure of tight oil reservoirs in Sichuan Basin measured by rate-controlled mercury injection
  50. An activity window model for social interaction structure on Twitter
  51. Transient thermal regime trough the constitutive matrix applied to asynchronous electrical machine using the cell method
  52. On the zagreb polynomials of benzenoid systems
  53. Integrability analysis of the partial differential equation describing the classical bond-pricing model of mathematical finance
  54. The Greek parameters of a continuous arithmetic Asian option pricing model via Laplace Adomian decomposition method
  55. Quantifying the global solar radiation received in Pietermaritzburg, KwaZulu-Natal to motivate the consumption of solar technologies
  56. Sturm-Liouville difference equations having Bessel and hydrogen atom potential type
  57. Study on the response characteristics of oil wells after deep profile control in low permeability fractured reservoirs
  58. Depiction and analysis of a modified theta shaped double negative metamaterial for satellite application
  59. An attempt to geometrize electromagnetism
  60. Structure of traveling wave solutions for some nonlinear models via modified mathematical method
  61. Thermo-convective instability in a rotating ferromagnetic fluid layer with temperature modulation
  62. Construction of new solitary wave solutions of generalized Zakharov-Kuznetsov-Benjamin-Bona-Mahony and simplified modified form of Camassa-Holm equations
  63. Effect of magnetic field and heat source on Upper-convected-maxwell fluid in a porous channel
  64. Physical cues of biomaterials guide stem cell fate of differentiation: The effect of elasticity of cell culture biomaterials
  65. Shooting method analysis in wire coating withdrawing from a bath of Oldroyd 8-constant fluid with temperature dependent viscosity
  66. Rank correlation between centrality metrics in complex networks: an empirical study
  67. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering
  68. Modeling of electric and heat processes in spot resistance welding of cross-wire steel bars
  69. Dynamic characteristics of triaxial active control magnetic bearing with asymmetric structure
  70. Design optimization of an axial-field eddy-current magnetic coupling based on magneto-thermal analytical model
  71. Thermal constitutive matrix applied to asynchronous electrical machine using the cell method
  72. Temperature distribution around thin electroconductive layers created on composite textile substrates
  73. Model of the multipolar engine with decreased cogging torque by asymmetrical distribution of the magnets
  74. Analysis of spatial thermal field in a magnetic bearing
  75. Use of the mathematical model of the ignition system to analyze the spark discharge, including the destruction of spark plug electrodes
  76. Assessment of short/long term electric field strength measurements for a pilot district
  77. Simulation study and experimental results for detection and classification of the transient capacitor inrush current using discrete wavelet transform and artificial intelligence
  78. Magnetic transmission gear finite element simulation with iron pole hysteresis
  79. Pulsed excitation terahertz tomography – multiparametric approach
  80. Low and high frequency model of three phase transformer by frequency response analysis measurement
  81. Multivariable polynomial fitting of controlled single-phase nonlinear load of input current total harmonic distortion
  82. Optimal design of a for middle-low-speed maglev trains
  83. Eddy current modeling in linear and nonlinear multifilamentary composite materials
  84. The visual attention saliency map for movie retrospection
  85. AC/DC current ratio in a current superimposition variable flux reluctance machine
  86. Influence of material uncertainties on the RLC parameters of wound inductors modeled using the finite element method
  87. Cogging force reduction in linear tubular flux switching permanent-magnet machines
  88. Modeling hysteresis curves of La(FeCoSi)13 compound near the transition point with the GRUCAD model
  89. Electro-magneto-hydrodynamic lubrication
  90. 3-D Electromagnetic field analysis of wireless power transfer system using K computer
  91. Simplified simulation technique of rotating, induction heated, calender rolls for study of temperature field control
  92. Design, fabrication and testing of electroadhesive interdigital electrodes
  93. A method to reduce partial discharges in motor windings fed by PWM inverter
  94. Reluctance network lumped mechanical & thermal models for the modeling and predesign of concentrated flux synchronous machine
  95. Special Issue Applications of Nonlinear Dynamics
  96. Study on dynamic characteristics of silo-stock-foundation interaction system under seismic load
  97. Microblog topic evolution computing based on LDA algorithm
  98. Modeling the creep damage effect on the creep crack growth behavior of rotor steel
  99. Neighborhood condition for all fractional (g, f, n′, m)-critical deleted graphs
  100. Chinese open information extraction based on DBMCSS in the field of national information resources
  101. 10.1515/phys-2018-0079
  102. CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile
  103. Intelligent Monitoring Network Construction based on the utilization of the Internet of things (IoT) in the Metallurgical Coking Process
  104. Temperature detection technology of power equipment based on Fiber Bragg Grating
  105. Research on a rotational speed control strategy of the mandrel in a rotary steering system
  106. Dynamic load balancing algorithm for large data flow in distributed complex networks
  107. Super-structured photonic crystal fiber Bragg grating biosensor image model based on sparse matrix
  108. Fractal-based techniques for physiological time series: An updated approach
  109. Analysis of the Imaging Characteristics of the KB and KBA X-ray Microscopes at Non-coaxial Grazing Incidence
  110. Application of modified culture Kalman filter in bearing fault diagnosis
  111. Exact solutions and conservation laws for the modified equal width-Burgers equation
  112. On topological properties of block shift and hierarchical hypercube networks
  113. Elastic properties and plane acoustic velocity of cubic Sr2CaMoO6 and Sr2CaWO6 from first-principles calculations
  114. A note on the transmission feasibility problem in networks
  115. Ontology learning algorithm using weak functions
  116. Diagnosis of the power frequency vacuum arc shape based on 2D-PIV
  117. Parametric simulation analysis and reliability of escalator truss
  118. A new algorithm for real economy benefit evaluation based on big data analysis
  119. Synergy analysis of agricultural economic cycle fluctuation based on ant colony algorithm
  120. Multi-level encryption algorithm for user-related information across social networks
  121. Multi-target tracking algorithm in intelligent transportation based on wireless sensor network
  122. Fast recognition method of moving video images based on BP neural networks
  123. Compressed sensing image restoration algorithm based on improved SURF operator
  124. Design of load optimal control algorithm for smart grid based on demand response in different scenarios
  125. Face recognition method based on GA-BP neural network algorithm
  126. Optimal path selection algorithm for mobile beacons in sensor network under non-dense distribution
  127. Localization and recognition algorithm for fuzzy anomaly data in big data networks
  128. Urban road traffic flow control under incidental congestion as a function of accident duration
  129. Optimization design of reconfiguration algorithm for high voltage power distribution network based on ant colony algorithm
  130. Feasibility simulation of aseismic structure design for long-span bridges
  131. Construction of renewable energy supply chain model based on LCA
  132. The tribological properties study of carbon fabric/ epoxy composites reinforced by nano-TiO2 and MWNTs
  133. A text-Image feature mapping algorithm based on transfer learning
  134. Fast recognition algorithm for static traffic sign information
  135. Topical Issue: Clean Energy: Materials, Processes and Energy Generation
  136. An investigation of the melting process of RT-35 filled circular thermal energy storage system
  137. Numerical analysis on the dynamic response of a plate-and-frame membrane humidifier for PEMFC vehicles under various operating conditions
  138. Energy converting layers for thin-film flexible photovoltaic structures
  139. Effect of convection heat transfer on thermal energy storage unit
Downloaded on 12.4.2026 from https://www.degruyterbrill.com/document/doi/10.1515/phys-2018-0009/html
Scroll to top button