Startseite The size prediction of potential inclusions embedded in the sub-surface of fused silica by damage morphology
Artikel Open Access

The size prediction of potential inclusions embedded in the sub-surface of fused silica by damage morphology

  • Xiang Gao EMAIL logo , Rong Qiu , Kunpeng Wang , Jiangmei Zhang , Guorui Zhou , Ke Yao , Yong Jiang und Qiang Zhou
Veröffentlicht/Copyright: 30. April 2017
Artikel downloaden (PDF)
Open Physics
Aus der Zeitschrift Open Physics Band 15 Heft 1

Abstract

A model for predicting the size ranges of different potential inclusions initiating damage on the surface of fused silica has been presented. This accounts for the heating of nanometric inclusions whose absorptivity is described based on Mie Theory. The depth profile of impurities has been measured by ICP-OES. By the measured temporal pulse profile on the surface of fused silica, the temperature and thermal stress has been calculated. Furthermore, considering the limit conditions of temperature and thermal stress strength for different damage morphologies, the size range of potential inclusions for fused silica is discussed.

Keywords: Laser-induced breakdown; Polishing; Optical materials
PACS: 79.20.Ds; 42.62.-b; 42.70.Ce

1 Introduction

The achievement of the highest output energy from large aperture laser facilities [1–4] is limited by the obscuration of damage regions induced by high laser fluence [5, 6]. Even optical components with the highest quality such as fused silica can suffer material breakdowns near the surface at laser intensities far below the intrinsic damage threshold (∼100 GW/cm2) [7]. The different damage precursors include submicroscopic defects and inclusions induced by polishing or grinding processes. The presence of submicroscopic cracks, pores and indentations will cause enhance absorption due to local electric field intensification, which can lower the surface breakdown threshold [8–10]. Nano-absorbing centers such as impurities, contaminants and void fillers will also be embedded on the subsurface of fused silica [2, 11, 13]. These inclusions can absorb laser energy significantly, raising the temperature around the inclusions high enough to cause damage [14]. A statistical trend has been observed in damage tests due to size distributions [15–19] (Dirac, power law, Gaussian law) of the inclusions. The damage density and damage probability dependend on laser parameters (fluence, pulse length, spot size, or wavelength) and this has been observed in the experiments [20–22].

The purpose of this paper is to describe the method for identifying the size of various inclusions which creat different damage morphologies. In section 2, the thermal and mechanical model is presented to evaluate the temperature and stress based on the light absorption in nanoabsorbers. In section 3, the temporal profile of pulse and the depth profile of impurities have been detected. The size range of various potential impurities which created different types of damage morphologies can be obtained.

2 Temperature and thermal stress model of absorbing inclusion

It is assumed that all characteristic dimensions of precursors are smaller than 200 nm since larger precursors can readily be detected by classical optical techniques. It is believed that the presence of submicroscopic defects will cause local enhancement of electric field strength. For three representative geometries, it has been shown that a crack has a larger electric field enhancement factor γ than a cylindrical groove and spherical pore; this can be expressed as γ = m2 [8], where m is the optical index of the host material. For fused silica, m = 1.48, the threshold intensity induced by surface cracks is a factor of 4.8 lower than that of the bulk. However, in practical optical components the surface damage threshold irradiated by nanosecond pulses is two orders of magnitude lower than that of the bulk. Therefore, the inclusion produced by polishing or grinding processes will be the dominant mechanism, giving the lowest surface damage threshold.

In accordance with experimental data, we assume the absorbing inclusions are embedded in the transparent matrix. For simplification, the shape of inclusions is taken to be spherical and they are nanoscale size. The large variations in the thermal parameters of the inclusion only weakly affect temperature evolution in the case of an absorbing inclusion driven mechanism [23]. Thus, the thermal properties of the surrounding matrix are of critical importance for the temperature rise [15], so the calculation only considers the dependence of thermal properties of the host material on the temperature. In this manuscript, considering the real temporal shape of the laser pulse by fitting a measured Gaussian temporal profile, we refined previous model [20–22] to calculate the particle temperature.

The temperature of inclusion and host matrix heating by nanosecond pulses is described as

Ckρk∂θk∂t=∇χk∇θk+Qϕ(a−r)(1)

where θ = T − T0 is the increase in temperature T at the heated location over the initial temperature T0 and a is the radius of inclusion. ρk, Ck and χk, respectively, present density, thermal capacity and thermal conductivity. k has two values: 1 corresponds to the inclusion and 2 to the host material. Q is the light intensities absorbed by the inclusion, which could be written as Q = (1 − R)ηI0 exp(−At2/τ2), where η is the absorption cross-section per unit particle volume, R is the reflectivity of the surrounding medium and I0 is the maximum intensity. τ is the pulse duration (at 1/e) and A is a fit parameter about the pulse temporal profile. The function ϕ(r) is expressed as ϕ(r) = 0 at r < 0 and ϕ(r) = 1 at r ≥ 0. The absorption cross-section per unit particle volume η is calculated with Mie theory [24].

η=2πk2V∑n=1Nstop2n+1Rean+bn−an2+bn2(2)

an and bn are the coefficients determined with continuity relations [22]. k = 2πma/λ, m is the refractive index of host material and λ is the wavelength of incident light. V is the volume of inclusion. Nstop is a cutoff parameter in the calculation, which can be set to 10. The absorption cross-section per unit volume of various spherical particles in a fused silica matrix has been plotted in Figure 1.

Figure 1 Absorption cross section per unit particle volume as a function of particle diameter
Figure 1

Absorption cross section per unit particle volume as a function of particle diameter

Figure 1 shows that the absorptivity of CeO2 inclusions is lower compared to others (Cu, Fe and Hf). By using the method of Fourier transform, the heat equation can be readily solved numerically to express T [22]

T1=T0+12π∑ω=−∞ω=+∞A1rexpiβ1r−A1rexp−iβ1r−Sexp−iωtΔω(3)
T2=T0+12π∑ω=−∞ω=+∞A2rexpiβ2r−iωtΔω(4)

where

S=3ηI08aβ12χ1πτexp−τ2ω216(5)
A1=χ2aS1−iβ2aχ2−χ1−iχ1β2an1+iaχ1β1n2(6)
A2=A1n1−aSexp−iβ2a(7)

where, βk=ωρkCk⋅(1+i)/2χk1/2, nk=exp⁡(iβka)+(−1)kexp⁡(−iβka). The temperature rise of local regions in the host material brings about thermal stress. The processes of crack formation, melting or ablation of host material are achieved in the final stages of the LID. To investigate these situations, the thermal stress has to be considered based on the solutions for temperature Eq. (3) and Eq. (4). The thermoelasticity equation can be expressed as [25]

∂∂rr−2∂∂rr2urk=αk1+νk1−νk∂θkr,t∂r(8)

where ur is the radial displacement vector. αk is the linear expansion coefficient and νk is the Poisson’s ratio. As the limit condition (ur1 finite as r → 0 and ur2 = 0 as r → ∞), the general solution of the equation is

ur1=1+ν11−ν1α1r2∫0rθ1(r)r2dr+B1r(9)
ur2=1+ν21−ν2α2r2∫arθ2(r)r2dr+B2r2(10)

According to the deformation tensor definition and Duamel-Naiman relationships, the thermal stress can be described as

εrk=∂urk/∂r,εθk=εφk=urk/r(11)
σrk=Ek1+νk1−2νk1−νkεrk+2νkεϕk−1+νkαkθk(12)
σθk=σφk=Ek1+νk1−2νkεφk+νkεrk−1+νkαkθk(13)

where E is the Young’s modulus. σr and σθ are radial stress and hoop stress, respectively. The thermal stress can be described as

σr1=−2α1E11−ν11r3∫0rθ1r2dr+E1B11−2ν1(14)
σθ1=α1E11−ν11r3∫0rθ1r2dr+E1B11−2ν1−α1E1θ11−ν1(15)
σr2=−2α2E21−ν21r3∫arθ2r2dr−1r32E2B21+ν2(16)
σθ2=2α2E21−ν21r3∫arθ2r2dr+1r3E2B21+ν2−α2E2θ21−ν2(17)

where, B1 and B2 are obtained by the boundary conditions (εθ1 = εθ2 and σr1 = σr2, at r = a). The damage of a sample is assumed to occur when the maximum temperature in host material exceeds the melting point, or the maximum stress exceeds the tensile/compressive strength of the material [29].

σr(r=a)=−1a36α1E1E2(1+ν2)E1+2(1−2ν1)E2∫0aθ1(r)r2dr(18)
σθ(r=a)=1a33α1E1E2(1+ν2)E1+2(1−2ν1)E2∫0aθ1(r)r2dr−α2E2(1−ν2)θ2(a)(19)

With knowledge of the temporal profile of the pulse, the formation and evolution of damage morphologies can be analyzed.

3 Analysis of damage features

The experimental setup (Figure 2) used for this work involves a single-mode Nd:YAG laser giving access to 355 nm pulses with Gaussian temporal profile. The fast photodiode is used to observe the temporal profile as shown in Figure 3. The calorimeter is used to measure the pulse energy and the fluence fluctuations have a standard deviation of about 10%. The visible He–Ne laser beam is used to monitor the region of damage under test. The density of precursors on the subsurface of sample is very low, and is less than two orders of magnitude in a square with a 100 μm side [14]. Hence, in order to relate the damage morphologies and specific precursors, 12 μm of beam diameter has been used in our experiment to ensure only one precursor under the irradiation of a laser spot.

Figure 2 Experimental test for damage test
Figure 2

Experimental test for damage test

Figure 3 Gaussian temporal profile
Figure 3

Gaussian temporal profile

The different damage features under laser irradiation at each fluence are observed by optical microscopy (OM) and scanning electron microscopy (SEM). The damage tests of samples are repeated in different regions irradiated by laser pulses at each fluence. As shown in Figure 4, the typical damage features initiated at near LIDT (5 J/cm2) have been observed.

Figure 4 OM and SEM (inset of the figures) images of damage sites observed on the sample after irradiation at near LIDT: (a) The little crack region and (b) the circular damage region with a melted pit
Figure 4

OM and SEM (inset of the figures) images of damage sites observed on the sample after irradiation at near LIDT: (a) The little crack region and (b) the circular damage region with a melted pit

We can see in Figure 4(a) only cracks observed on the surface of the fused silica. Thus, in Figure 4(b), the melted pit can be found in the center of the damage region and the cracks locate around it. As exposed in Ref. [30], the cracks can be formed in a “cold” region, since the local temperature does not exceed the melting point of the matrix. In order to explain the formation of damage morphology, we calculate the thermal stress and temperature under the laser irradiation. The parameters of inclusions and the surrounding matrix (fused silica) used in the calculation are listed in Table 1 [26–28].

Table 1

Main parameters used in calculation

MaterialSiO2CeO2CuFeHf
Index1.482-0.2 i1.3-1.9 i1.5-2.7 i1.7-2.6 i
Conductivity (W/mK)1.4240180.218.4
Diffusivity (m2/s)9.40 × 10−77.13 × 10−79.97 × 10−52.27 × 10−59.90 × 10−6
Young’s modulus (Gpa)8722911021178
Poisson ratio0.160.330.340.290.37
Coefficient of lineal expansion (K−1)0.5 × 10−61.2 × 10−51.65 × 10−51.18 × 10−55.8 × 10−6

If the potential inclusion is assumed to be a spherical Hf particle, the evolution of the damage region can be inferred by calculating the stress and temperature at different times during the pulse duration in Figure 5.

Figure 5 Evolution of stress and temperature during pulse duration. The diameter of Hf inclusion is 60 nm. The laser fluence is 5 J/cm2 (1. Cracks along the radial direction; 2. Melting; 3. spallation)
Figure 5

Evolution of stress and temperature during pulse duration. The diameter of Hf inclusion is 60 nm. The laser fluence is 5 J/cm2 (1. Cracks along the radial direction; 2. Melting; 3. spallation)

The negative values of stress represent compressive stress and positive values represent tensile stress [29]. For fused silica, the strength of compressive stress is 1500 Mpa and the strength of tensile stress is 50 Mpa. The hoop stress can cause cracking along the radial direction. The radial stress can cause spallation in the damage region. Thence, the damage features on the surface of fused silica should be accompanied by cracks along the radial direction, melting and spallation, as shown in Figure 4. We can see from Figure 5 that the hoop stress reaches the strength of tensile stress before the temperature reaches the melting point and the radial stress reaches the strength of compressive stress. Therefore, it is assumed that cracks will be initiated before the formation of melted zones and spallation.

There are maximum stresses and temperatures during the pulse as seen in Figure 5, so the maximum stress and temperature with different particle sizes can be obtained in Figure 6.

Figure 6 The maximum stress and temperature as a function of particle diameter. The laser fluence is 5 J/cm2 (1. Cracks along the radial direction; 2. Melting; 3. spallation)
Figure 6

The maximum stress and temperature as a function of particle diameter. The laser fluence is 5 J/cm2 (1. Cracks along the radial direction; 2. Melting; 3. spallation)

From Figure 6, compared to the condition of melting and spallation, cracks along the radial direction can be initiated by the smaller particle. Thus, by caculating the hoop stress as a function of particle size, the smallest particles to iniate cracks can be obtained. From these results, we can deduce that the damage in Figure 4(a) should be induced by the small particles, because it is characterized by the cracks along the radial direction without other damage features. With an incease in particle size, in addition to cracks along the radial direction, a melted pit will be formed when the temperature reaches the melting point of fused silica. Subsequently, spallation will occur once the radial stress exceed its compressive strength as shown in Figure 4(b).

The maximum hoop stress and temperature of the surrounding matrix along the r direction have been plotted in Figure 7.

Figure 7 The maximum hoop stress and temperature of surrounding matrix along r direction. The diameter of Hf inclusion is 40 nm. The laser fluence is 5 J/cm2
Figure 7

The maximum hoop stress and temperature of surrounding matrix along r direction. The diameter of Hf inclusion is 40 nm. The laser fluence is 5 J/cm2

As seen in Figure 7, cracks occur further away from the center of inclusions than the melted regions, in good agreement with obtained experimental result (Figure 4(b)).

The types of potential inclusions have been determined by inductively coupled plasma optical emission spectrometry (ICP-OES) [10]. The sample manufactured by using cerium oxide slurry was applied for our experiment. After accurate weighing, the sample was digested by ultra pure grade hydrofluoric acid (HF) solution in 10 minutes and the average thickness of the sample digested was calculated. By analysis of suitable spectra, the contents of main impurities can be obtained. This process was repeated up to two times and the contents of main impurities from different depth of layers have been detected as per Table 2. Al2O3 particles are weak absorption materials at 355 nm, so we just consider CeO2, Cu, Fe and Hf inclusions in the calculation.

Table 2

The contents of main impurities from different depth of layers (μg/g)

DepthCeO2CuFeAl2O3Hf
0∼1 μm42.38.23.610.20.8
1∼2 μm1.20.640.130.560.03
2∼3 μm0.040.008–––

In order to identify the size ranges of potential inlusions that creat different damage morphologies, we calculate the thermal stress and temperature with different sizes of inclusions under the laser irradiation as seen in Figure 8.

Figure 8 Hoop stress and temperature as a funcation of inclusions size
Figure 8

Hoop stress and temperature as a funcation of inclusions size

From Figure 8(a), when the hoop stress reaches the strength of the material, there is lower level of temperature which does not exceed the melting point of fused silica. With the increase of inclusion size, the temperature of the surrounding matrix will reach melting point. Additionally, as seen in Figure 8(b), when sufficient heat melts the inclusions, the temperature will increase strongly induced by a significant variation of absorptivity [31]. Consequently, the size ranges of various potential particles are summarized in Table 3.

Table 3

The size ranges of various potential inclusions (nm)

InclusionCeO2CuFeHf
Type 1> 267–348–3516–39
Type 2–> 34> 35> 39

The maximum sizes of all potential inclusions are less than 200 nm. This is reasonable because the conventional optical microscopy whose maximum resolution is 200 nm cannot detect these impurities. As seen in Table 2, for various potential inclusions, the particle sizes to create type 2 are larger than the particle sizes to create type 1. Cu particles can initate cracks with the smallest size compared to other particles. CeO2 inclusions cannot create melted regions as type 2. Hf particles require larger sizes to create type 2 than Cu and Fe particles.

4 Conclusion

A model for the heating of absorbing inclusions whose absorptivity is calculated by the Mie theory has been developed in this work. For a measured temporal profile, on the surface of fused silica the temperature and stress distribution induced by various inclusions has been calculated. For various types of damage morphologies, the size range of potential inclusions has been deduced by the limit conditions of temperature and stress of fused silica. The results of our investigations can provide the knowledge of potential inclusion sizes which initiated damage on the subsurface of an optical substrate.

Acknowledgement

We thank Yajun Zhang for assistance with laser damage testing and Lingling Zhai for measurement of the sample by ICP-OES. This work was supported by National Natural Science Foundation of China (NSFC) (No: U1530109, 61505171, 61505170).

References

[1] Conder A., Alger T., Azevedo S., Chang J., Glenn S., Kegelmeyer L., et al., Final optics damage inspection (FODI) for the National Ignition Facility, Proc. SPIE, 2007, 6720, 1-1210.1117/12.759131Suche in Google Scholar

[2] Nostrand M. C., Weiland T. L., Luthi R. L., Vickers J. L., Sell W. D., Stanley J. A., et al., A large aperture, high energy laser system for optics and optical component testing, Proc. SPIE, 2004, 5257, 325-33310.1117/12.528327Suche in Google Scholar

[3] Fleurot N., Cavailler C., Bourgade J. L., The Laser Mégajoule (LMJ) Project dedicated to inertial confinement fusion: Development and construction status, Fusion Eng. Des., 2005, 74, 147-15410.1016/j.fusengdes.2005.06.251Suche in Google Scholar

[4] Peng H. S., Zhang X. M., Wei X. F., Zheng W. G., Jing F., Sui Z., et al., Design of 60-kJ SG-III laser facility and related technology development, Proc. SPIE, 2001, 4424, 98–10310.1117/12.425569Suche in Google Scholar

[5] Jiang Y., Xiang X., Yuan X. D., Liu C. M., Wang H. J., Luo C. S., et al., Characterization of 355 nm laser-induced damage of mitigated damage sites in fused silica, Laser Phys., 2013, 23, 1-710.1088/1054-660X/23/2/026001Suche in Google Scholar

[6] Huang W. Q., Han W., Wang F., Xiang Y., Li F. Q., Feng B., et al., Laser-Induced Damage Growth on Larger-Aperture Fused Silica Optical Components at 351 nm, Chin. Phys. Lett., 2009, 26, 0179011-017901410.1088/0256-307X/26/1/017901Suche in Google Scholar

[7] Stuart B., Feit M., Herman S., Rubenchik A., Shore B., Perry M., Nanosecond-to-femtosecond laser-induced breakdown in dielectrics, Phys. Rev. B, 1996, 53, 1749-176110.1103/PhysRevB.53.1749Suche in Google Scholar PubMed

[8] Bloembergen N., Role of Cracks, Pores, and Absorbing Inclusions on Laser Induced Damage Threshold at Surfaces of Transparent Dielectrics, Appl. Opt., 1973, 12, 661-66410.1364/AO.12.000661Suche in Google Scholar PubMed

[9] Feit M. D., Influence of subsurface cracks on laser-induced surface damage, Proc. SPIE, 2004, 5273, 264-27210.1117/12.523864Suche in Google Scholar

[10] Laurence T. A., Bude J. D., Shen N., Feldman T., Miller P. E., Metallic-like photoluminescence and absorption in fused silica surface flaws, Appl. Phys. Lett., 2009, 94, 1511141-151114310.1063/1.3119622Suche in Google Scholar

[11] Bertussi B., Natoli J. Y., Commandre M., Effect of polishing process on silica surface laser-induced damage threshold at 355 nm, Opt. Commun., 2004, 242, 227-23110.1016/j.optcom.2004.08.016Suche in Google Scholar

[12] Neauport J., Lamaignere L., Bercegol H., Pilon F., Birolleau J. C., Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm, Opt. Express, 2005, 13, 10163-1017110.1364/OPEX.13.010163Suche in Google Scholar

[13] Wang Z., Wang L., Yang J., Peng W., Hu H., Detection of subsurface trace impurity in polished fused silica with biological method, Opt. Express, 2014, 22, 21292-2130110.1364/OE.22.021292Suche in Google Scholar PubMed

[14] Gallais L., Voarino P., Amra C., Optical measurement of size and complex index of laser-damage precursors: the inverse problem, J. Opt. Soc. Am. B, 2004, 21, 1073-108010.1364/JOSAB.21.001073Suche in Google Scholar

[15] Gallais L., Capoulade J., Natoli J. Y., Commandré M., Investigation of nanodefect properties in optical coatings by coupling measured and simulated laser damage statistics, J. Appl. Phys., 2008, 104, 53120-5312910.1063/1.2975179Suche in Google Scholar

[16] Natoli J. Y., Gallais L., Akhouayri H., Amra C., Laser-induced damage of materials in bulk, thin-film, and liquid forms, Appl. Opt., 2002, 41, 3156-316610.1364/OIC.2001.TuF8Suche in Google Scholar

[17] Krol H., Gallais L., Grezes-Besset C., Natoli J. Y., Commandre M., Investigation of nanoprecursors threshold distribution in laser-damage testing, Opt. Commun., 2005, 256, 184-18910.1016/j.optcom.2005.06.059Suche in Google Scholar

[18] Trenholme J. B., Feit M. D., Rubenchik A. M., Size-selection initiation model extended to include shape and random factors, Proc. SPIE, 2005, 5991, 9910-992210.1117/12.638834Suche in Google Scholar

[19] Fu X., Melnikaitis A., Gallais L., Kiáčas S., Drazdys R., Sirutkaitis V., et al., Investigation of the distribution of laser damage precursors at 1064 nm, 12 ns on Niobia-Silica and Zirconia-Silica mixtures, Opt. Express, 2012, 20, 26089-2609810.1364/OE.20.026089Suche in Google Scholar PubMed

[20] Feit M. D., Rubenchik A. M., Implications of nanoabsorber initiators for damage probability curves, pulselength scaling and laser conditioning, Proc. SPIE, 2003, 5273, 74-82.10.1117/12.523862Suche in Google Scholar

[21] Gao X,, Feng G. Y., Han J. H., Zhai L., Investigation of laser-induced damage by various initiators on the subsurface of fused silica, Opt. Express, 2012, 20, 22095-2210110.1364/OE.20.022095Suche in Google Scholar PubMed

[22] Gao X., Feng G. Y., Han J. H., Chen N., Tan C., Zhou S., Investigation of laser-induced damage by nanoabsorbers at the surface of fused silica, Appl. Opt., 2012, 51, 2463-246810.1364/AO.51.002463Suche in Google Scholar PubMed

[23] Bennett H. E., Chase L. L., Guenther A. H., Newnam B. E., Soileau M. J., Laser-Induced Damage in Optical Materials, SPIE, Bellingham, 199010.1520/STP1117-EBSuche in Google Scholar

[24] Hulst H. C., Light scattering by small particles, Wiley, New York, 1957Suche in Google Scholar

[25] Boley B, A., Weiner J. H., Theory of Thermal Stresses, John Wiley & Sons, New York, 1960Suche in Google Scholar

[26] Weber M. J., Handbook of optical materials, CRC, Florida, 200210.1201/9781420050196Suche in Google Scholar

[27] Zhao J., Sullivan J., Structural modification of silica glass by laser scanning, J. Appl. Phys., 2004, 95, 5475-548210.1063/1.1703832Suche in Google Scholar

[28] Vignes R. M., Soules T. F., Stolken J. S., Settgast R. R., Elhadj S., Matthews M. J., Thermomechanical Modeling of Laser-Induced Structural Relaxation and Deformation of Glass: Volume Changes in Fused Silica at High Temperatures, J. Am. Ceram. Soc., 2013, 96, 137–14510.1111/jace.12110Suche in Google Scholar

[29] Wang B., Qin Y., Ni X., Shen Z., Lu J., Effect of defects on long-pulse laser-induced damage of two kinds of optical thin films Appl. Opt. 2010, 49, 5537-554410.1364/AO.49.005537Suche in Google Scholar PubMed

[30] Koldunov F., Manenkov A., Theory of laser-induced inclusion-initiated damage in optical materials, Opt. Eng., 2012, 51, 121811, 1-1110.1117/1.OE.51.12.121811Suche in Google Scholar

[31] Zhang D., Li Z., Zhong Z., Li X., Guan L., The dynamics of pulsed laser deposition technology Beijing Science Press, Beijing, 2011Suche in Google Scholar

Received: 2016-10-8
Accepted: 2017-1-25
Published Online: 2017-4-30

© 2017 X. Gao et al.

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Artikel in diesem Heft

  1. Regular Articles
  2. Analysis of a New Fractional Model for Damped Bergers’ Equation
  3. Regular Articles
  4. Optimal homotopy perturbation method for nonlinear differential equations governing MHD Jeffery-Hamel flow with heat transfer problem
  5. Regular Articles
  6. Semi- analytic numerical method for solution of time-space fractional heat and wave type equations with variable coefficients
  7. Regular Articles
  8. Investigation of a curve using Frenet frame in the lightlike cone
  9. Regular Articles
  10. Construction of complex networks from time series based on the cross correlation interval
  11. Regular Articles
  12. Nonlinear Schrödinger approach to European option pricing
  13. Regular Articles
  14. A modified cubic B-spline differential quadrature method for three-dimensional non-linear diffusion equations
  15. Regular Articles
  16. A new miniaturized negative-index meta-atom for tri-band applications
  17. Regular Articles
  18. Seismic stability of the survey areas of potential sites for the deep geological repository of the spent nuclear fuel
  19. Regular Articles
  20. Distributed containment control of heterogeneous fractional-order multi-agent systems with communication delays
  21. Regular Articles
  22. Sensitivity analysis and economic optimization studies of inverted five-spot gas cycling in gas condensate reservoir
  23. Regular Articles
  24. Quantum mechanics with geometric constraints of Friedmann type
  25. Regular Articles
  26. Modeling and Simulation for an 8 kW Three-Phase Grid-Connected Photo-Voltaic Power System
  27. Regular Articles
  28. Application of the optimal homotopy asymptotic method to nonlinear Bingham fluid dampers
  29. Regular Articles
  30. Analysis of Drude model using fractional derivatives without singular kernels
  31. Regular Articles
  32. An unsteady MHD Maxwell nanofluid flow with convective boundary conditions using spectral local linearization method
  33. Regular Articles
  34. New analytical solutions for conformable fractional PDEs arising in mathematical physics by exp-function method
  35. Regular Articles
  36. Quantum mechanical calculation of electron spin
  37. Regular Articles
  38. CO2 capture by polymeric membranes composed of hyper-branched polymers with dense poly(oxyethylene) comb and poly(amidoamine)
  39. Regular Articles
  40. Chain on a cone
  41. Regular Articles
  42. Multi-task feature learning by using trace norm regularization
  43. Regular Articles
  44. Superluminal tunneling of a relativistic half-integer spin particle through a potential barrier
  45. Regular Articles
  46. Neutrosophic triplet normed space
  47. Regular Articles
  48. Lie algebraic discussion for affinity based information diffusion in social networks
  49. Regular Articles
  50. Radiation dose and cancer risk estimates in helical CT for pulmonary tuberculosis infections
  51. Regular Articles
  52. A comparison study of steady-state vibrations with single fractional-order and distributed-order derivatives
  53. Regular Articles
  54. Some new remarks on MHD Jeffery-Hamel fluid flow problem
  55. Regular Articles
  56. Numerical investigation of magnetohydrodynamic slip flow of power-law nanofluid with temperature dependent viscosity and thermal conductivity over a permeable surface
  57. Regular Articles
  58. Charge conservation in a gravitational field in the scalar ether theory
  59. Regular Articles
  60. Measurement problem and local hidden variables with entangled photons
  61. Regular Articles
  62. Compression of hyper-spectral images using an accelerated nonnegative tensor decomposition
  63. Regular Articles
  64. Fabrication and application of coaxial polyvinyl alcohol/chitosan nanofiber membranes
  65. Regular Articles
  66. Calculating degree-based topological indices of dominating David derived networks
  67. Regular Articles
  68. The structure and conductivity of polyelectrolyte based on MEH-PPV and potassium iodide (KI) for dye-sensitized solar cells
  69. Regular Articles
  70. Chiral symmetry restoration and the critical end point in QCD
  71. Regular Articles
  72. Numerical solution for fractional Bratu’s initial value problem
  73. Regular Articles
  74. Structure and optical properties of TiO2 thin films deposited by ALD method
  75. Regular Articles
  76. Quadruple multi-wavelength conversion for access network scalability based on cross-phase modulation in an SOA-MZI
  77. Regular Articles
  78. Application of ANNs approach for wave-like and heat-like equations
  79. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  80. Study on node importance evaluation of the high-speed passenger traffic complex network based on the Structural Hole Theory
  81. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  82. A mathematical/physics model to measure the role of information and communication technology in some economies: the Chinese case
  83. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  84. Numerical modeling of the thermoelectric cooler with a complementary equation for heat circulation in air gaps
  85. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  86. On the libration collinear points in the restricted three – body problem
  87. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  88. Research on Critical Nodes Algorithm in Social Complex Networks
  89. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  90. A simulation based research on chance constrained programming in robust facility location problem
  91. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  92. A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy
  93. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  94. Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness
  95. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  96. A real negative selection algorithm with evolutionary preference for anomaly detection
  97. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  98. A privacy-preserving parallel and homomorphic encryption scheme
  99. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  100. Random walk-based similarity measure method for patterns in complex object
  101. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  102. A Mathematical Study of Accessibility and Cohesion Degree in a High-Speed Rail Station Connected to an Urban Bus Transport Network
  103. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  104. Design and Simulation of the Integrated Navigation System based on Extended Kalman Filter
  105. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  106. Oil exploration oriented multi-sensor image fusion algorithm
  107. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  108. Analysis of Product Distribution Strategy in Digital Publishing Industry Based on Game-Theory
  109. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  110. Expanded Study on the accumulation effect of tourism under the constraint of structure
  111. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  112. Unstructured P2P Network Load Balance Strategy Based on Multilevel Partitioning of Hypergraph
  113. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  114. Research on the method of information system risk state estimation based on clustering particle filter
  115. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  116. Demand forecasting and information platform in tourism
  117. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  118. Physical-chemical properties studying of molecular structures via topological index calculating
  119. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  120. Local kernel nonparametric discriminant analysis for adaptive extraction of complex structures
  121. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  122. City traffic flow breakdown prediction based on fuzzy rough set
  123. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  124. Conservation laws for a strongly damped wave equation
  125. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  126. Blending type approximation by Stancu-Kantorovich operators based on Pólya-Eggenberger distribution
  127. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  128. Computing the Ediz eccentric connectivity index of discrete dynamic structures
  129. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  130. A discrete epidemic model for bovine Babesiosis disease and tick populations
  131. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  132. Study on maintaining formations during satellite formation flying based on SDRE and LQR
  133. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  134. Relationship between solitary pulmonary nodule lung cancer and CT image features based on gradual clustering
  135. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  136. A novel fast target tracking method for UAV aerial image
  137. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  138. Fuzzy comprehensive evaluation model of interuniversity collaborative learning based on network
  139. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  140. Conservation laws, classical symmetries and exact solutions of the generalized KdV-Burgers-Kuramoto equation
  141. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  142. After notes on self-similarity exponent for fractal structures
  143. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  144. Excitation probability and effective temperature in the stationary regime of conductivity for Coulomb Glasses
  145. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  146. Comparisons of feature extraction algorithm based on unmanned aerial vehicle image
  147. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  148. Research on identification method of heavy vehicle rollover based on hidden Markov model
  149. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  150. Classifying BCI signals from novice users with extreme learning machine
  151. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  152. Topics on data transmission problem in software definition network
  153. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  154. Statistical inferences with jointly type-II censored samples from two Pareto distributions
  155. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  156. Estimation for coefficient of variation of an extension of the exponential distribution under type-II censoring scheme
  157. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  158. Analysis on trust influencing factors and trust model from multiple perspectives of online Auction
  159. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  160. Coupling of two-phase flow in fractured-vuggy reservoir with filling medium
  161. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  162. Production decline type curves analysis of a finite conductivity fractured well in coalbed methane reservoirs
  163. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  164. Flow Characteristic and Heat Transfer for Non-Newtonian Nanofluid in Rectangular Microchannels with Teardrop Dimples/Protrusions
  165. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  166. The size prediction of potential inclusions embedded in the sub-surface of fused silica by damage morphology
  167. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  168. Research on carbonate reservoir interwell connectivity based on a modified diffusivity filter model
  169. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  170. The method of the spatial locating of macroscopic throats based-on the inversion of dynamic interwell connectivity
  171. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  172. Unsteady mixed convection flow through a permeable stretching flat surface with partial slip effects through MHD nanofluid using spectral relaxation method
  173. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  174. A volumetric ablation model of EPDM considering complex physicochemical process in porous structure of char layer
  175. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  176. Numerical simulation on ferrofluid flow in fractured porous media based on discrete-fracture model
  177. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  178. Macroscopic lattice Boltzmann model for heat and moisture transfer process with phase transformation in unsaturated porous media during freezing process
  179. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  180. Modelling of intermittent microwave convective drying: parameter sensitivity
  181. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  182. Simulating gas-water relative permeabilities for nanoscale porous media with interfacial effects
  183. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  184. Simulation of counter-current imbibition in water-wet fractured reservoirs based on discrete-fracture model
  185. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  186. Investigation effect of wettability and heterogeneity in water flooding and on microscopic residual oil distribution in tight sandstone cores with NMR technique
  187. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  188. Analytical modeling of coupled flow and geomechanics for vertical fractured well in tight gas reservoirs
  189. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  190. Special Issue: Ever New "Loopholes" in Bell’s Argument and Experimental Tests
  191. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  192. The ultimate loophole in Bell’s theorem: The inequality is identically satisfied by data sets composed of ±1′s assuming merely that they exist
  193. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  194. Erratum to: The ultimate loophole in Bell’s theorem: The inequality is identically satisfied by data sets composed of ±1′s assuming merely that they exist
  195. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  196. Rhetoric, logic, and experiment in the quantum nonlocality debate
  197. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  198. What If Quantum Theory Violates All Mathematics?
  199. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  200. Relativity, anomalies and objectivity loophole in recent tests of local realism
  201. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  202. The photon identification loophole in EPRB experiments: computer models with single-wing selection
  203. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  204. Bohr against Bell: complementarity versus nonlocality
  205. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  206. Is Einsteinian no-signalling violated in Bell tests?
  207. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  208. Bell’s “Theorem”: loopholes vs. conceptual flaws
  209. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  210. Nonrecurrence and Bell-like inequalities
  211. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  212. Three-dimensional computer models of electrospinning systems
  213. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  214. Electric field computation and measurements in the electroporation of inhomogeneous samples
  215. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  216. Modelling of magnetostriction of transformer magnetic core for vibration analysis
  217. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  218. Comparison of the fractional power motor with cores made of various magnetic materials
  219. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  220. Dynamics of the line-start reluctance motor with rotor made of SMC material
  221. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  222. Inhomogeneous dielectrics: conformal mapping and finite-element models
  223. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  224. Topology optimization of induction heating model using sequential linear programming based on move limit with adaptive relaxation
  225. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  226. Detection of inter-turn short-circuit at start-up of induction machine based on torque analysis
  227. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  228. Current superimposition variable flux reluctance motor with 8 salient poles
  229. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  230. Modelling axial vibration in windings of power transformers
  231. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  232. Field analysis & eddy current losses calculation in five-phase tubular actuator
  233. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  234. Hybrid excited claw pole generator with skewed and non-skewed permanent magnets
  235. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  236. Electromagnetic phenomena analysis in brushless DC motor with speed control using PWM method
  237. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  238. Field-circuit analysis and measurements of a single-phase self-excited induction generator
  239. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  240. A comparative analysis between classical and modified approach of description of the electrical machine windings by means of T0 method
  241. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  242. Field-based optimal-design of an electric motor: a new sensitivity formulation
  243. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  244. Application of the parametric proper generalized decomposition to the frequency-dependent calculation of the impedance of an AC line with rectangular conductors
  245. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  246. Virtual reality as a new trend in mechanical and electrical engineering education
  247. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  248. Holonomicity analysis of electromechanical systems
  249. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  250. An accurate reactive power control study in virtual flux droop control
  251. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  252. Localized probability of improvement for kriging based multi-objective optimization
  253. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  254. Research of influence of open-winding faults on properties of brushless permanent magnets motor
  255. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  256. Optimal design of the rotor geometry of line-start permanent magnet synchronous motor using the bat algorithm
  257. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  258. Model of depositing layer on cylindrical surface produced by induction-assisted laser cladding process
  259. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  260. Detection of inter-turn faults in transformer winding using the capacitor discharge method
  261. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  262. A novel hybrid genetic algorithm for optimal design of IPM machines for electric vehicle
  263. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  264. Lamination effects on a 3D model of the magnetic core of power transformers
  265. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  266. Detection of vertical disparity in three-dimensional visualizations
  267. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  268. Calculations of magnetic field in dynamo sheets taking into account their texture
  269. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  270. 3-dimensional computer model of electrospinning multicapillary unit used for electrostatic field analysis
  271. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  272. Optimization of wearable microwave antenna with simplified electromagnetic model of the human body
  273. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  274. Induction heating process of ferromagnetic filled carbon nanotubes based on 3-D model
  275. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  276. Speed control of an induction motor by 6-switched 3-level inverter
https://doi.org/10.1515/phys-2017-0025
Schlagwörter für diesen Artikel
Laser-induced breakdown; Polishing; Optical materials
Creative Commons
BY-NC-ND 3.0

Artikel in diesem Heft

  1. Regular Articles
  2. Analysis of a New Fractional Model for Damped Bergers’ Equation
  3. Regular Articles
  4. Optimal homotopy perturbation method for nonlinear differential equations governing MHD Jeffery-Hamel flow with heat transfer problem
  5. Regular Articles
  6. Semi- analytic numerical method for solution of time-space fractional heat and wave type equations with variable coefficients
  7. Regular Articles
  8. Investigation of a curve using Frenet frame in the lightlike cone
  9. Regular Articles
  10. Construction of complex networks from time series based on the cross correlation interval
  11. Regular Articles
  12. Nonlinear Schrödinger approach to European option pricing
  13. Regular Articles
  14. A modified cubic B-spline differential quadrature method for three-dimensional non-linear diffusion equations
  15. Regular Articles
  16. A new miniaturized negative-index meta-atom for tri-band applications
  17. Regular Articles
  18. Seismic stability of the survey areas of potential sites for the deep geological repository of the spent nuclear fuel
  19. Regular Articles
  20. Distributed containment control of heterogeneous fractional-order multi-agent systems with communication delays
  21. Regular Articles
  22. Sensitivity analysis and economic optimization studies of inverted five-spot gas cycling in gas condensate reservoir
  23. Regular Articles
  24. Quantum mechanics with geometric constraints of Friedmann type
  25. Regular Articles
  26. Modeling and Simulation for an 8 kW Three-Phase Grid-Connected Photo-Voltaic Power System
  27. Regular Articles
  28. Application of the optimal homotopy asymptotic method to nonlinear Bingham fluid dampers
  29. Regular Articles
  30. Analysis of Drude model using fractional derivatives without singular kernels
  31. Regular Articles
  32. An unsteady MHD Maxwell nanofluid flow with convective boundary conditions using spectral local linearization method
  33. Regular Articles
  34. New analytical solutions for conformable fractional PDEs arising in mathematical physics by exp-function method
  35. Regular Articles
  36. Quantum mechanical calculation of electron spin
  37. Regular Articles
  38. CO2 capture by polymeric membranes composed of hyper-branched polymers with dense poly(oxyethylene) comb and poly(amidoamine)
  39. Regular Articles
  40. Chain on a cone
  41. Regular Articles
  42. Multi-task feature learning by using trace norm regularization
  43. Regular Articles
  44. Superluminal tunneling of a relativistic half-integer spin particle through a potential barrier
  45. Regular Articles
  46. Neutrosophic triplet normed space
  47. Regular Articles
  48. Lie algebraic discussion for affinity based information diffusion in social networks
  49. Regular Articles
  50. Radiation dose and cancer risk estimates in helical CT for pulmonary tuberculosis infections
  51. Regular Articles
  52. A comparison study of steady-state vibrations with single fractional-order and distributed-order derivatives
  53. Regular Articles
  54. Some new remarks on MHD Jeffery-Hamel fluid flow problem
  55. Regular Articles
  56. Numerical investigation of magnetohydrodynamic slip flow of power-law nanofluid with temperature dependent viscosity and thermal conductivity over a permeable surface
  57. Regular Articles
  58. Charge conservation in a gravitational field in the scalar ether theory
  59. Regular Articles
  60. Measurement problem and local hidden variables with entangled photons
  61. Regular Articles
  62. Compression of hyper-spectral images using an accelerated nonnegative tensor decomposition
  63. Regular Articles
  64. Fabrication and application of coaxial polyvinyl alcohol/chitosan nanofiber membranes
  65. Regular Articles
  66. Calculating degree-based topological indices of dominating David derived networks
  67. Regular Articles
  68. The structure and conductivity of polyelectrolyte based on MEH-PPV and potassium iodide (KI) for dye-sensitized solar cells
  69. Regular Articles
  70. Chiral symmetry restoration and the critical end point in QCD
  71. Regular Articles
  72. Numerical solution for fractional Bratu’s initial value problem
  73. Regular Articles
  74. Structure and optical properties of TiO2 thin films deposited by ALD method
  75. Regular Articles
  76. Quadruple multi-wavelength conversion for access network scalability based on cross-phase modulation in an SOA-MZI
  77. Regular Articles
  78. Application of ANNs approach for wave-like and heat-like equations
  79. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  80. Study on node importance evaluation of the high-speed passenger traffic complex network based on the Structural Hole Theory
  81. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  82. A mathematical/physics model to measure the role of information and communication technology in some economies: the Chinese case
  83. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  84. Numerical modeling of the thermoelectric cooler with a complementary equation for heat circulation in air gaps
  85. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  86. On the libration collinear points in the restricted three – body problem
  87. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  88. Research on Critical Nodes Algorithm in Social Complex Networks
  89. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  90. A simulation based research on chance constrained programming in robust facility location problem
  91. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  92. A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy
  93. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  94. Mathematical analysis of the impact mechanism of information platform on agro-product supply chain and agro-product competitiveness
  95. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  96. A real negative selection algorithm with evolutionary preference for anomaly detection
  97. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  98. A privacy-preserving parallel and homomorphic encryption scheme
  99. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  100. Random walk-based similarity measure method for patterns in complex object
  101. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  102. A Mathematical Study of Accessibility and Cohesion Degree in a High-Speed Rail Station Connected to an Urban Bus Transport Network
  103. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  104. Design and Simulation of the Integrated Navigation System based on Extended Kalman Filter
  105. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  106. Oil exploration oriented multi-sensor image fusion algorithm
  107. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  108. Analysis of Product Distribution Strategy in Digital Publishing Industry Based on Game-Theory
  109. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  110. Expanded Study on the accumulation effect of tourism under the constraint of structure
  111. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  112. Unstructured P2P Network Load Balance Strategy Based on Multilevel Partitioning of Hypergraph
  113. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  114. Research on the method of information system risk state estimation based on clustering particle filter
  115. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  116. Demand forecasting and information platform in tourism
  117. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  118. Physical-chemical properties studying of molecular structures via topological index calculating
  119. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  120. Local kernel nonparametric discriminant analysis for adaptive extraction of complex structures
  121. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  122. City traffic flow breakdown prediction based on fuzzy rough set
  123. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  124. Conservation laws for a strongly damped wave equation
  125. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  126. Blending type approximation by Stancu-Kantorovich operators based on Pólya-Eggenberger distribution
  127. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  128. Computing the Ediz eccentric connectivity index of discrete dynamic structures
  129. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  130. A discrete epidemic model for bovine Babesiosis disease and tick populations
  131. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  132. Study on maintaining formations during satellite formation flying based on SDRE and LQR
  133. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  134. Relationship between solitary pulmonary nodule lung cancer and CT image features based on gradual clustering
  135. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  136. A novel fast target tracking method for UAV aerial image
  137. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  138. Fuzzy comprehensive evaluation model of interuniversity collaborative learning based on network
  139. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  140. Conservation laws, classical symmetries and exact solutions of the generalized KdV-Burgers-Kuramoto equation
  141. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  142. After notes on self-similarity exponent for fractal structures
  143. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  144. Excitation probability and effective temperature in the stationary regime of conductivity for Coulomb Glasses
  145. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  146. Comparisons of feature extraction algorithm based on unmanned aerial vehicle image
  147. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  148. Research on identification method of heavy vehicle rollover based on hidden Markov model
  149. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  150. Classifying BCI signals from novice users with extreme learning machine
  151. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  152. Topics on data transmission problem in software definition network
  153. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  154. Statistical inferences with jointly type-II censored samples from two Pareto distributions
  155. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  156. Estimation for coefficient of variation of an extension of the exponential distribution under type-II censoring scheme
  157. Special issue on Nonlinear Dynamics in General and Dynamical Systems in particular
  158. Analysis on trust influencing factors and trust model from multiple perspectives of online Auction
  159. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  160. Coupling of two-phase flow in fractured-vuggy reservoir with filling medium
  161. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  162. Production decline type curves analysis of a finite conductivity fractured well in coalbed methane reservoirs
  163. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  164. Flow Characteristic and Heat Transfer for Non-Newtonian Nanofluid in Rectangular Microchannels with Teardrop Dimples/Protrusions
  165. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  166. The size prediction of potential inclusions embedded in the sub-surface of fused silica by damage morphology
  167. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  168. Research on carbonate reservoir interwell connectivity based on a modified diffusivity filter model
  169. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  170. The method of the spatial locating of macroscopic throats based-on the inversion of dynamic interwell connectivity
  171. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  172. Unsteady mixed convection flow through a permeable stretching flat surface with partial slip effects through MHD nanofluid using spectral relaxation method
  173. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  174. A volumetric ablation model of EPDM considering complex physicochemical process in porous structure of char layer
  175. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  176. Numerical simulation on ferrofluid flow in fractured porous media based on discrete-fracture model
  177. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  178. Macroscopic lattice Boltzmann model for heat and moisture transfer process with phase transformation in unsaturated porous media during freezing process
  179. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  180. Modelling of intermittent microwave convective drying: parameter sensitivity
  181. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  182. Simulating gas-water relative permeabilities for nanoscale porous media with interfacial effects
  183. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  184. Simulation of counter-current imbibition in water-wet fractured reservoirs based on discrete-fracture model
  185. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  186. Investigation effect of wettability and heterogeneity in water flooding and on microscopic residual oil distribution in tight sandstone cores with NMR technique
  187. Special Issue on Advances on Modelling of Flowing and Transport in Porous Media
  188. Analytical modeling of coupled flow and geomechanics for vertical fractured well in tight gas reservoirs
  189. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  190. Special Issue: Ever New "Loopholes" in Bell’s Argument and Experimental Tests
  191. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  192. The ultimate loophole in Bell’s theorem: The inequality is identically satisfied by data sets composed of ±1′s assuming merely that they exist
  193. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  194. Erratum to: The ultimate loophole in Bell’s theorem: The inequality is identically satisfied by data sets composed of ±1′s assuming merely that they exist
  195. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  196. Rhetoric, logic, and experiment in the quantum nonlocality debate
  197. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  198. What If Quantum Theory Violates All Mathematics?
  199. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  200. Relativity, anomalies and objectivity loophole in recent tests of local realism
  201. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  202. The photon identification loophole in EPRB experiments: computer models with single-wing selection
  203. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  204. Bohr against Bell: complementarity versus nonlocality
  205. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  206. Is Einsteinian no-signalling violated in Bell tests?
  207. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  208. Bell’s “Theorem”: loopholes vs. conceptual flaws
  209. Special Issue on Ever-New "Loopholes" in Bell’s Argument and Experimental Tests
  210. Nonrecurrence and Bell-like inequalities
  211. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  212. Three-dimensional computer models of electrospinning systems
  213. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  214. Electric field computation and measurements in the electroporation of inhomogeneous samples
  215. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  216. Modelling of magnetostriction of transformer magnetic core for vibration analysis
  217. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  218. Comparison of the fractional power motor with cores made of various magnetic materials
  219. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  220. Dynamics of the line-start reluctance motor with rotor made of SMC material
  221. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  222. Inhomogeneous dielectrics: conformal mapping and finite-element models
  223. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  224. Topology optimization of induction heating model using sequential linear programming based on move limit with adaptive relaxation
  225. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  226. Detection of inter-turn short-circuit at start-up of induction machine based on torque analysis
  227. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  228. Current superimposition variable flux reluctance motor with 8 salient poles
  229. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  230. Modelling axial vibration in windings of power transformers
  231. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  232. Field analysis & eddy current losses calculation in five-phase tubular actuator
  233. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  234. Hybrid excited claw pole generator with skewed and non-skewed permanent magnets
  235. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  236. Electromagnetic phenomena analysis in brushless DC motor with speed control using PWM method
  237. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  238. Field-circuit analysis and measurements of a single-phase self-excited induction generator
  239. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  240. A comparative analysis between classical and modified approach of description of the electrical machine windings by means of T0 method
  241. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  242. Field-based optimal-design of an electric motor: a new sensitivity formulation
  243. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  244. Application of the parametric proper generalized decomposition to the frequency-dependent calculation of the impedance of an AC line with rectangular conductors
  245. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  246. Virtual reality as a new trend in mechanical and electrical engineering education
  247. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  248. Holonomicity analysis of electromechanical systems
  249. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  250. An accurate reactive power control study in virtual flux droop control
  251. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  252. Localized probability of improvement for kriging based multi-objective optimization
  253. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  254. Research of influence of open-winding faults on properties of brushless permanent magnets motor
  255. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  256. Optimal design of the rotor geometry of line-start permanent magnet synchronous motor using the bat algorithm
  257. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  258. Model of depositing layer on cylindrical surface produced by induction-assisted laser cladding process
  259. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  260. Detection of inter-turn faults in transformer winding using the capacitor discharge method
  261. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  262. A novel hybrid genetic algorithm for optimal design of IPM machines for electric vehicle
  263. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  264. Lamination effects on a 3D model of the magnetic core of power transformers
  265. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  266. Detection of vertical disparity in three-dimensional visualizations
  267. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  268. Calculations of magnetic field in dynamo sheets taking into account their texture
  269. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  270. 3-dimensional computer model of electrospinning multicapillary unit used for electrostatic field analysis
  271. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  272. Optimization of wearable microwave antenna with simplified electromagnetic model of the human body
  273. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  274. Induction heating process of ferromagnetic filled carbon nanotubes based on 3-D model
  275. Special Issue: The 18th International Symposium on Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering ISEF 2017
  276. Speed control of an induction motor by 6-switched 3-level inverter
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 3.11.2025 von https://www.degruyterbrill.com/document/doi/10.1515/phys-2017-0025/html?lang=de
Button zum nach oben scrollen