Retraction of “Aging assessment of silicone rubber materials under corona discharge accompanied by humidity and UV radiation”

Articles in the same Issue

1. Research Articles
2. MHD radiative mixed convective flow of a sodium alginate-based hybrid nanofluid over a convectively heated extending sheet with Joule heating
3. Experimental study of mortar incorporating nano-magnetite on engineering performance and radiation shielding
4. Multicriteria-based optimization and multi-variable non-linear regression analysis of concrete containing blends of nano date palm ash and eggshell powder as cementitious materials
5. A promising Ag₂S/poly-2-amino-1-mercaptobenzene open-top spherical core–shell nanocomposite for optoelectronic devices: A one-pot technique
6. Biogenic synthesized selenium nanoparticles combined chitosan nanoparticles controlled lung cancer growth via ROS generation and mitochondrial damage pathway
7. Fabrication of PDMS nano-mold by deposition casting method
8. Stimulus-responsive gradient hydrogel micro-actuators fabricated by two-photon polymerization-based 4D printing
9. Physical aspects of radiative Carreau nanofluid flow with motile microorganisms movement under yield stress via oblique penetrable wedge
10. Effect of polar functional groups on the hydrophobicity of carbon nanotubes-bacterial cellulose nanocomposite
11. Review in green synthesis mechanisms, application, and future prospects for Garcinia mangostana L. (mangosteen)-derived nanoparticles
12. Entropy generation and heat transfer in nonlinear Buoyancy–driven Darcy–Forchheimer hybrid nanofluids with activation energy
13. Green synthesis of silver nanoparticles using Ginkgo biloba seed extract: Evaluation of antioxidant, anticancer, antifungal, and antibacterial activities
14. A numerical analysis of heat and mass transfer in water-based hybrid nanofluid flow containing copper and alumina nanoparticles over an extending sheet
15. Investigating the behaviour of electro-magneto-hydrodynamic Carreau nanofluid flow with slip effects over a stretching cylinder
16. Electrospun thermoplastic polyurethane/nano-Ag-coated clear aligners for the inhibition of Streptococcus mutans and oral biofilm
17. Investigation of the optoelectronic properties of a novel polypyrrole-multi-well carbon nanotubes/titanium oxide/aluminum oxide/p-silicon heterojunction
18. Novel photothermal magnetic Janus membranes suitable for solar water desalination
19. Green synthesis of silver nanoparticles using Ageratum conyzoides for activated carbon compositing to prepare antimicrobial cotton fabric
20. Activation energy and Coriolis force impact on three-dimensional dusty nanofluid flow containing gyrotactic microorganisms: Machine learning and numerical approach
21. Machine learning analysis of thermo-bioconvection in a micropolar hybrid nanofluid-filled square cavity with oxytactic microorganisms
22. Research and improvement of mechanical properties of cement nanocomposites for well cementing
23. Thermal and stability analysis of silver–water nanofluid flow over unsteady stretching sheet under the influence of heat generation/absorption at the boundary
24. Cobalt iron oxide-infused silicone nanocomposites: Magnetoactive materials for remote actuation and sensing
25. Magnesium-reinforced PMMA composite scaffolds: Synthesis, characterization, and 3D printing via stereolithography
26. Bayesian inference-based physics-informed neural network for performance study of hybrid nanofluids
27. Numerical simulation of non-Newtonian hybrid nanofluid flow subject to a heterogeneous/homogeneous chemical reaction over a Riga surface
28. Enhancing the superhydrophobicity, UV-resistance, and antifungal properties of natural wood surfaces via in situ formation of ZnO, TiO₂, and SiO₂ particles
29. Synthesis and electrochemical characterization of iron oxide/poly(2-methylaniline) nanohybrids for supercapacitor application
30. Impacts of double stratification on thermally radiative third-grade nanofluid flow on elongating cylinder with homogeneous/heterogeneous reactions by implementing machine learning approach
31. Synthesis of Cu₄O₃ nanoparticles using pumpkin seed extract: Optimization, antimicrobial, and cytotoxicity studies
32. Cationic charge influence on the magnetic response of the Fe₃O₄–[Me²⁺ _1−y Me³⁺ _y (OH₂)] ^y+(Co₃ ²⁻) _y/2·mH₂O hydrotalcite system
33. Pressure sensing intelligent martial arts short soldier combat protection system based on conjugated polymer nanocomposite materials
34. Magnetohydrodynamics heat transfer rate under inclined buoyancy force for nano and dusty fluids: Response surface optimization for the thermal transport
35. Fly ash and nano-graphene enhanced stabilization of engine oil-contaminated soils
36. Enhancing natural fiber-reinforced biopolymer composites with graphene nanoplatelets: Mechanical, morphological, and thermal properties
37. Performance evaluation of dual-scale strengthened co-bonded single-lap joints using carbon nanotubes and Z-pins with ANN
38. Computational works of blood flow with dust particles and partially ionized containing tiny particles on a moving wedge: Applications of nanotechnology
39. Hybridization of biocomposites with oil palm cellulose nanofibrils/graphene nanoplatelets reinforcement in green epoxy: A study of physical, thermal, mechanical, and morphological properties
40. Design and preparation of micro-nano dual-scale particle-reinforced Cu–Al–V alloy: Research on the aluminothermic reduction process
41. Spectral quasi-linearization and response optimization on magnetohydrodynamic flow via stenosed artery with hybrid and ternary solid nanoparticles: Support vector machine learning
42. Ferrite/curcumin hybrid nanocomposite formulation: Physicochemical characterization, anticancer activity, and apoptotic and cell cycle analyses in skin cancer cells
43. Enhanced therapeutic efficacy of Tamoxifen against breast cancer using extra virgin olive oil-based nanoemulsion delivery system
44. A titanium oxide- and silver-based hybrid nanofluid flow between two Riga walls that converge and diverge through a machine-learning approach
45. Enhancing convective heat transfer mechanisms through the rheological analysis of Casson nanofluid flow towards a stagnation point over an electro-magnetized surface
46. Intrinsic self-sensing cementitious composites with hybrid nanofillers exhibiting excellent piezoresistivity
47. Research on mechanical properties and sulfate erosion resistance of nano-reinforced coal gangue based geopolymer concrete
48. Impact of surface and configurational features of chemically synthesized chains of Ni nanostars on the magnetization reversal process
49. Porous sponge-like AsOI/poly(2-aminobenzene-1-thiol) nanocomposite photocathode for hydrogen production from artificial and natural seawater
50. Multifaceted insights into WO₃ nanoparticle-coupled antibiotics to modulate resistance in enteric pathogens of Houbara bustard birds
51. Synthesis of sericin-coated silver nanoparticles and their applications for the anti-bacterial finishing of cotton fabric
52. Enhancing chloride resistance of freeze–thaw affected concrete through innovative nanomaterial–polymer hybrid cementitious coating
53. Development and performance evaluation of green aluminium metal matrix composites reinforced with graphene nanopowder and marble dust
54. Morphological, physical, thermal, and mechanical properties of carbon nanotubes reinforced arrowroot starch composites
55. Influence of the graphene oxide nanosheet on tensile behavior and failure characteristics of the cement composites after high-temperature treatment
56. Central composite design modeling in optimizing heat transfer rate in the dissipative and reactive dynamics of viscoplastic nanomaterials deploying Joule and heat generation aspects
57. Double diffusion of nano-enhanced phase change materials in connected porous channels: A hybrid ISPH-XGBoost approach
58. Synergistic impacts of Thompson–Troian slip, Stefan blowing, and nonuniform heat generation on Casson nanofluid dynamics through a porous medium
59. Optimization of abrasive water jet machining parameters for basalt fiber/SiO₂ nanofiller reinforced composites
60. Enhancing aesthetic durability of Zisha teapots via TiO₂ nanoparticle surface modification: A study on self-cleaning, antimicrobial, and mechanical properties
61. Nanocellulose solution based on iron(iii) sodium tartrate complexes
62. Combating multidrug-resistant infections: Gold nanoparticles–chitosan–papain-integrated dual-action nanoplatform for enhanced antibacterial activity
63. Novel royal jelly-mediated green synthesis of selenium nanoparticles and their multifunctional biological activities
64. Direct bandgap transition for emission in GeSn nanowires
65. Synthesis of ZnO nanoparticles with different morphologies using a microwave-based method and their antimicrobial activity
66. Numerical investigation of convective heat and mass transfer in a trapezoidal cavity filled with ternary hybrid nanofluid and a central obstacle
67. Halloysite nanotube enhanced polyurethane nanocomposites for advanced electroinsulating applications
68. Low molar mass ionic liquid’s modified carbon nanotubes and its role in PVDF crystalline stress generation
69. Green synthesis of polydopamine-functionalized silver nanoparticles conjugated with Ceftazidime: in silico and experimental approach for combating antibiotic-resistant bacteria and reducing toxicity
70. Evaluating the influence of graphene nano powder inclusion on mechanical, vibrational and water absorption behaviour of ramie/abaca hybrid composites
71. Dynamic-behavior of Casson-type hybrid nanofluids due to a stretching sheet under the coupled impacts of boundary slip and reaction-diffusion processes
72. Influence of polyvinyl alcohol on the physicochemical and self-sensing properties of nano carbon black reinforced cement mortar
73. Advanced machine learning approaches for predicting compressive and flexural strength of carbon nanotube–reinforced cement composites: a comparative study and model interpretability analysis
74. Review Articles
75. A comprehensive review on hybrid plasmonic waveguides: Structures, applications, challenges, and future perspectives
76. Nanoparticles in low-temperature preservation of biological systems of animal origin
77. Fluorescent sulfur quantum dots for environmental monitoring
78. Nanoscience systematic review methodology standardization
79. Nanotechnology revolutionizing osteosarcoma treatment: Advances in targeted kinase inhibitors
80. AFM: An important enabling technology for 2D materials and devices
81. Carbon and 2D nanomaterial smart hydrogels for therapeutic applications
82. Principles, applications and future prospects in photodegradation systems
83. Do gold nanoparticles consistently benefit crop plants under both non-stressed and abiotic stress conditions?
84. An updated overview of nanoparticle-induced cardiovascular toxicity
85. Arginine as a promising amino acid for functionalized nanosystems: Innovations, challenges, and future directions
86. Advancements in the use of cancer nanovaccines: Comprehensive insights with focus on lung and colon cancer
87. Membrane-based biomimetic delivery systems for glioblastoma multiforme therapy
88. The drug delivery systems based on nanoparticles for spinal cord injury repair
89. Green synthesis, biomedical effects, and future trends of Ag/ZnO bimetallic nanoparticles: An update
90. Application of magnesium and its compounds in biomaterials for nerve injury repair
91. Micro/nanomotors in biomedicine: Construction and applications
92. Hydrothermal synthesis of biomass-derived CQDs: Advances and applications
93. Research progress in 3D bioprinting of skin: Challenges and opportunities
94. Review on bio-selenium nanoparticles: Synthesis, protocols, and applications in biomedical processes
95. Gold nanocrystals and nanorods functionalized with protein and polymeric ligands for environmental, energy storage, and diagnostic applications: A review
96. An in-depth analysis of rotational and non-rotational piezoelectric energy harvesting beams: A comprehensive review
97. Advancements in perovskite/CIGS tandem solar cells: Material synergies, device configurations, and economic viability for sustainable energy
98. Deep learning in-depth analysis of crystal graph convolutional neural networks: A new era in materials discovery and its applications
99. Review of recent nano TiO₂ film coating methods, assessment techniques, and key problems for scaleup
100. Antioxidant quantum dots for spinal cord injuries: A review on advancing neuroprotection and regeneration in neurological disorders
101. Rise of polycatecholamine ultrathin films: From synthesis to smart applications
102. Advancing microencapsulation strategies for bioactive compounds: Enhancing stability, bioavailability, and controlled release in food applications
103. Advances in the design and manipulation of self-assembling peptide and protein nanostructures for biomedical applications
104. Photocatalytic pervious concrete systems: from classic photocatalysis to luminescent photocatalysis
105. Corrigendum
106. Corrigendum to “Synthesis and characterization of smart stimuli-responsive herbal drug-encapsulated nanoniosome particles for efficient treatment of breast cancer”
107. Special Issue on Advanced Nanomaterials for Carbon Capture, Environment and Utilization for Energy Sustainability - Part III
108. Efficiency optimization of quantum dot photovoltaic cell by solar thermophotovoltaic system
109. Exploring the diverse nanomaterials employed in dental prosthesis and implant techniques: An overview
110. Electrochemical investigation of bismuth-doped anode materials for low‑temperature solid oxide fuel cells with boosted voltage using a DC-DC voltage converter
111. Synthesis of HfSe₂ and CuHfSe₂ crystalline materials using the chemical vapor transport method and their applications in supercapacitor energy storage devices
112. Special Issue on Green Nanotechnology and Nano-materials for Environment Sustainability
113. Influence of nano-silica and nano-ferrite particles on mechanical and durability of sustainable concrete: A review
114. Surfaces and interfaces analysis on different carboxymethylation reaction time of anionic cellulose nanoparticles derived from oil palm biomass
115. Processing and effective utilization of lignocellulosic biomass: Nanocellulose, nanolignin, and nanoxylan for wastewater treatment
116. Retraction
117. Retraction of “Aging assessment of silicone rubber materials under corona discharge accompanied by humidity and UV radiation”