Abstract
The ultrasmall nanoparticles easily lead to a more seriously response than larger nanoparticles because of their physicochemical features. It is essential to understand their cytotoxicity effects for their further application. Here, we used ultrasmall 9 nm Fe3O4 NPs to explore its cytotoxicity mechanism on breast cancer cells. We demonstrated 9 nm Fe3O4 NPswas effectively internalized into cells and located in nucleus, subsequently, it inhibited DNA synthesis through inducing S-phase arrest.Moreover, 9 nm Fe3O4 NPs induced ROS production and oxidative damage by disturbing the expression of antioxidant-related genes (HMOX-1, GCLC and GCLM), which resulted in the enhancement of cells apoptosis and inhibition of cell proliferation, suggesting its potential to be used as therapeutic drug.
1 Introduction
The nanoparticles exhibit increased application in biomedical fields such as contrast agent, disease detection and drug delivery [1, 2, 3], but their interaction with cell remain poorly understood, especially for the ultrasmall nanoparticles. Owing to cells have a diameter range 10 to 100 μm, cellular parts are much smaller, and proteins are even smaller with a typical range of just 5 to 50 nm [4], therefore the smaller the nanoparticles size, the more the interaction with cellular components, which easily induce more toxic effect than larger particles of the same materials because of larger surface area, enhanced chemical reactivity and easier cellular penetration [5, 6, 7].
Fe3O4 NPs lies in its promising application in these fields of tumor diagnosis and drug delivery due to their physicochemical features, including biocompatibility and magnetic properties [8, 9, 10]. Therefore, we used ultrasmall Fe3O4 nanoparticles (Fe3O4 NPs) with 9 nm size to investigate the interaction mechanism of ultrasmall nanoparticles with MCF-7 breast cancer cell. We discovered that the Fe3O4 NPs with 9 nm size, it could inhibit the proliferation through enhancing oxidative stress apoptosis of MCF-7 breast cancer cell and disturbing cell cycle (Figure 1). This research contributes to further illustrate the mechanism of Fe3O4 NPs inhibiting MCF-7 breast cancer cells, and suggests the Fe3O4 NPs alone have potential as an antitumor drug to kill tumor.

Schematic diagram of interaction of Fe3O4 NPs and MCF-7 breast cancer cell
2 Experimental details
2.1 Materials
Fe (acac)3 was purchased from Acros Organics (Geel, Belgium). Fetal bovine serum (FBS), dulbecco modified eagle medium (DMEM), Streptomycin, Trizol reagent and trypan blue were purchased from Thermo Fisher Scientific (Waltham, MA, USA). Cell-Light EdU DNA cell proliferation kit was purchased from Guangzhou Ribo- Bio Co., Ltd. (Guangzhou, China). Triethylene glycol, Propidium iodide (PI) and Annexin V/PI apoptosis detection kit were purchased from Sigma-Aldrich China Co., Ltd. (Shanghai, China). Total Glutathione Assay Kit, 2’,7’–dichlorofluorescin diacetate (DCFH-DA) and bicin-choninic acid assay kit were purchased from Jiangsu Beyotime Institute of Biotechnology (Haimen, Jiangsu, China), SYBR Premix Ex Taq Perfect Real Time Kit was purchased from Otsu Takara Bio. Inc. (Otsu, Shiga, Japan). Horseradish peroxidase was purchased from Abcam (Cambridge, MA, USA). Other reagents were purchased from Sinopharm Chemial Reagent Co., Ltd. (Shanghai, China).MCF-7 breast cancer cells obtained from the Shanghai Cell Institute Country Cell Bank (Shanghai, China) were cultured in high-glucose DMEM containing 10% fetal bovine serum, 100 U/mL penicillin and 100 ug/mL streptomycin at 37∘C in a humidified environment containing 5% CO2.
2.2 Synthesis and characterization of Fe3O4 NPs
9-nanometer Fe3O4 NPs were prepared using the polyol method [11]. Briefly, 2 mmoL Fe(acac)3 and 25 mL triethylene glycol was directly added into a three-neck round-bottomed flask equipped with condenser, magnetic stirrer, thermograph, heating mantle and stirred under argon. The mixture was heated to 180∘C at a rate of 3∘C min−1 for maintaining 30 min, then was quickly heated to 280∘C for an another 30 min of reflux. After cooling down to room temperature, a black homogeneous colloidal suspension contained of magnetite nanoparticles was obtained. Then, 2 mmoL Fe (acac)3 was again added to react according the aforementioned contidition. The obtained solution was dialysis in distilled water and then was collected with a magnetic to obtain 9 nm Fe3O4 NPs. Subsequently, the Fe3O4 NPs was characterized using transmission electron microscope (TEM), dynamic light scattering (DLS) and X-ray diffractometer (XRD).
2.3 Cell viability
Cell viability was determined using cell count method [12]. MCF-7 breast cancer cells (4×104 cells/well)were seeded in 12-well plate and were cultured for 24 h. Different concentration of Fe3O4 NPs with 9 nm particle size were added and were separately incubated for 24 h, 48 h and 72 h. Cells were then harvested and resuspended in 1 mL PBS and were counted manually with 0.4% Trypan blue in a haemo-cytometer chamber.
2.4 Cell proliferation imaging
Cell proliferation was imaged using EdU cell proliferation imaging kit [13]. Briefly, MCF-7 breast cancer cells (4×104 cells/well) were seeded in 96-well plates and were incubated for 24 h. Different concentration of Fe3O4 NPs with 9nm particle size were added and were incubated for 48 h. The cells were then treated with 50 mM EdU culture medium for 2 h and washed twice (5 min/once) with PBS, followed by incubation with 4% PFA for 30 min. After removing the solution from the wells, 50 uL glycine (2 mg/mL) was added and were incubated for 5 min. Next, 100 uL PBS solution containing 0.5 % Triton X-100 was added and were incubated for 10 min. Thereafter, 100 uL Apollor staining reaction liquid was added and were incubated for 30 min. Finally, cells were incubated with 100 u L of Hoechst 33342 for 30 min, washed three times (5 min/once), and imaged using an IX-51 fluorescence microscope from Olympus Optical Company, Ltd (Tokyo, Japan). Data of cell proliferation was then calculated using Image-Pro Plus 7.0 software from Media Cybemetics, Inc. (Rockville, USA).
2.5 Cell apoptosis
Cell apoptosis was measured using Annexin V/PI apoptosis detection kit. Briefly, MCF-7 cells (1.6×105 cells/well) were seeded into 6-well plate and were incubated for 24 h. Different concentration of Fe3O4 NPs with 9 nm particle size were added and were incubated for 48 h. Cells were collected and were resuspended in 100 uL of binding buffer at a density of 1×106 cells/mL. Subsequently, 5uL annexin V-FITC and 5 uL PI were added and were incubated for 15min. 400uL binding buffer was then added to suspension and were gently mixed. Finally, cells were analyzed through FACSCalibur flow cytometry (BD Biosciences, San Diego, CA, USA).
2.6 Cell cycle
MCF-7 breast cancer cells (1.6×105 cells/well) were seeded into 6-well plate and were incubated for 24 h. Different concentrations of Fe3O4 NPs with 9 nm particle size was added and incubation for 48 h. Cells was then collected and fixed in 70% ethanol at 4∘C overnight. Cells were then resuspended in PBS and were incubated at 37∘C in the dark for 30 min in the solution of 10 mg/mL RNase and 1mg/mL PI. Finally, cells were analyzed using FACSCalibur flow cytometry.
2.7 Intracellular distribution
Intercellular distribution of Fe3O4 NPs was evaluated using TEM [13]. MCF-7 breast cancer cells were cultured in 10 cm plate and were incubated for 24 h. Fe3O4 NPs with 9 nm particle size was added to the plate and were incubated for 3h, cells were then washed with phosphate buffered saline (PBS) and were fixed in a 0.1 M PBS solution containing 2.5% glutaraldehyde for 30min. Afterward, cells were collected and were washed with PBS, trypsinized, harvested, and resuspended in 500 μL stationary liquid containing 4% paraformaldehyde and 5% glutaraldehyde. Cells were embedded in agar gel and were then cut into 1-mm slices. Each slice was again fixed using osmic acid, dehydrated, embedded, and imaged using TEM.
2.8 GSH analysis
Total intracellular glutathione (GSH) levels were measured using Total Glutathione Assay Kit [14]. Briefly, MCF-7 cells (1.6×105cells/well) were seeded into 6-well plate and were incubated for 24 h. Different concentration of Fe3O4 NPs with 9 nm particle size were added and were incubated for 48 h. Cells were then washed with PBS, freezed thawing rapidly twice using liquid nitrogen and 37∘C water, and were centrifuged at 10,000 × g for 10 min. The supernatant was reacted with DTNB (5,5’-Dithiobis (2-nitrobenzoic acid)) for 5 min at 25∘C to obtain the yellow-colored product. Afterwards, the product was assayed at 412 nm absorbance using a microplate reader (Bio-Tek, USA). The GSH concentrations were determined by comparison with standards.
2.9 ROS analysis
Intracellular reactive oxygen species (ROS) levels were assayed using FACSCalibur flow cytometer [14]. Briefly, MCF-7 breast cancer cells (1.6×105 cells/well) were seeded into 6-well plate and were incubated for 24 h. Different concentration of Fe3O4 NPs with 9 nm particle size were added and were incubated for 48 h. Then, cells were washed with FBS free medium and were incubated with 10 μM DCFH-DA for 30 min at 37∘C in the dark. Subsequently, cells were washed twice with FBS free medium to remove the additional dye, and were incubated in FBS free medium for an additional 30 min at 37∘C to allow complete de-esterification of intracellular diacetates. Cells were then harvested by trypsinization and at least 2×104 cells from each sample were analyzed using flow cytometry.
2.10 qRT-PCR analysis
The mRNA levels of genes involved in oxidative stress (HMOX1, GCLC and GCLM) were measured using quantitative the Applied Biosystems StepOnePlus™Real-Time PCR System (qRT-PCR) (Life Technologies, USA). Briefly, MCF-7 cells (1.6×105 cells/well) were seeded into 6-well plate and incubated for 24 h. Different concentration of Fe3O4 NPs with 9 nm particle size were added and incubated for 48 h. Cells were lysed with the addition of trizol reagent. RNA was extracted and purified utilizing standard phenol/chloroform extraction procedures. cDNA was obtained using a mixture containing 5 × PrimeScript RT Master Mix (Takara), Total RNA, and RNase Free dH2O. Subsequently, qRT-PCR analysis was performed using qRT-PCR with the SYBR Premix Ex Taq Perfect Real Time Kit. The PCR reaction consisted of initial thermal activation at 95∘C for 30 s and 40 cycles. Each cycle was as follows: 95∘C for 5 s; 60∘C for 34 s. PCR products were verified by analysis of melt curves and amplification plots. Quantitative values were acquired from linear regression of the PCR standard curve. The primer sequences of the amplified genes are as follows: HMOX1(Heme oxygenase-1), forward 5’-TGGAGACTCCCAGAGGGAAG-3’ and reverse 5’-CACCGGACAAAGTTCATGGC-3’; GAPDH, forward 5’-GGATGCAGAAGGAGATCACTG-3’ and reverse 5’-CGATCCACACGGAGTACTTG-3’, GCLC(glutamate-cysteine ligase, catalytic subunit), forward 5’-TGCACAATAACTTCATTTCCCAGT-3’ and reverse 5’-ATCCGGCTTAGAAGCCCTTG-3’, GCLM(glutamate-cysteine ligase, modifier subunit), forward 5’-GGTCAGGGAGTTTCCAGATGT-3’ and reverse 5’-CTGTGCAACTCCAAGGACTGA-3’.
2.11 Western Blotting
MCF-7 cells (1.6×105 cells/well) were seeded into 6-well plate and were incubated for 24 h. Different concentration of Fe3O4 NPs with 9nm particles size were added and incubated for 48 h. Cells were lysed and denatured, and the total protein concentration of cell extracts was determined using the bicinchoninic acid assay kit with BSA as a standard. Equal quantities (80 μg protein per lane) of total proteins were separated by SDS-PAGE (10%, 12% gels) under reducing conditions. The proteins were then electrophoretically transferred to nitrocellulose membranes. The membranes were blocked with 5% skimmed milk and incubated with anti-hmo × 1, anti-gclc, anti-gclmand anti-gapdh antibodies, respectively (1:1000; Cell Signaling Technology) at 4∘C overnight. This was followed by an incubation with goat anti-rabbit/anti-mouse secondary antibody conjugated with horseradish peroxidase (1:5000). An equal loading of each lane was evaluated by immunoblotting the same membranes with β-actin antibody after the detachment of previous primary antibody. Photographs were taken and the optical densities of bands were scanned and quantified with Gel Doc 2000 (BioRad, USA).
2.12 Statistics
Data were presented as mean ± standard deviation (S.D.) of at least three independent experiments. The significance of differences in data of different groups were appropriately determined by the unpaired Student’s t-test at P<0.05.
3 Results and discussion
3.1 Characterization of Fe3O4 NPs
In order to research the relative mechanism of toxicity of ultrasmall Fe3O4 NPs in MCF-7 cells, we synthesis the Fe3O4 NPs using the polyol method. XRD result suggest that the observed diffraction pattern can be indexed to Fe3O4 (JCPDS file 19-0629), demonstrating the Fe3O4 nanoparticles are successfully synthesized. TEM and DLS results verify that Fe3O4 NPs exhibit a spherical morphology and a diameter of 9 nm, and they have uniform and good size distribution (Figure 2A,2B).

Characterization of nanoparticles: TEM (A) and DLS (B) images of Fe3O4 NPs with 9nm particle sizes; the inserted image is the XRD image
3.2 Cell viability and cell proliferation imaging
Cell count method was employed to evaluate the effect of 9 nm Fe3O4 NPs for cell growth viability. As shown in Figure 3A, cell growth number gradually increased with the extension of incubation time from 24h to 72h in the control group alone. As the increase of Fe3O4 NPs incubation concentration from 10 μg/mL to 1000 μg/mL, cell growth number exhibited a concentration-dependent decrease. Especially at 1000 μg/mL incubation concentration, it reduced the cells number to the minimum, demonstrating that the Fe3O4 NPs affect the cells number in a concentration-dependent manner.

The influence of nanoparticles on cell proliferation: (A) Cell growth number of Fe3O4 NPs-treated MCF-7 cells. (B) The proliferation image of MCF-7 cells treated with Fe3O4 NPs for 48h. Blue fluorescence is from Hoechst 33342 nuclear staining. Red fluorescence is from Apollo DNA staining labelled by EdU. (C) Data quantitative image of cell proliferation. Data are presented as mean ±S.D. (n=3)
Cell proliferation depends on both cell division and cell death [15]. EdU cell proliferation imaging was carried out to further illustrate the influence mechanism of Fe3O4 NPs for cell proliferation. Edu easily inserted to DNA in the course of DNA synthesis, it thereby is employed to label S-phase cells for monitoring DNA synthesis and trace of the EdU-labelled cells when they progressed through the cell cycle and divided. As indicated in overlap image of Figure 3B, a gradually diminishing red fluorescence in quantify were observed in MCF-7 cells exposed to an increasing Fe3O4 NPs concentration from 10 μg/mL to 1000 μg/mL, demonstrating that Fe3O4 NPs disturb DNA synthesis of MCF-7 cells in a concentration-dependent manner and thereby further decrease cell proliferation (Figure 3C),which is consistent with the result of cell growth number. Especially for the high concentration of Fe3O4 NPs, it exhibited the most obvious interference efficiency. These experimental results suggested that the difference in concentration of nanoparticles induces different toxicity response.
3.3 Cell apoptosis
Cell apoptosis assay was performed to illustrate the mechanisms of Fe3O4 NPs affecting MCF-7 cells growth and proliferation, in which two different concentrations of Fe3O4 NPs was employed. As shown in Figure 4A and 4B, compared with control group, 15 μg/mL Fe3O4 NPs-treated cells exhibited no less low survival rates, and the early and late apoptosis of cells treated with 15 μg/mL Fe3O4 NPs also were no obviously variation, suggesting a negligible influence of Fe3O4 NPs for cell apoptosis at the incubation concentration of 15 μg/mL.

The analysis of cell apoptosis and cell cycle: Flow cytometer analysis on cell apoptosis of MCF-7 cells incubated with 9 nm Fe3O4 NPs for 48 h at a concentration of 15 μg/mL (A) and 600 μg/mL (B). Flow cytometer analysis on cell cycle of MCF-7 cells with 9 nm Fe3O4 NPs for 48 h at a concentration of 15 μg/mL (C) and 600 μg/mL (D). All histograms are quantitative figures for the corresponding cycle and apoptosis. Data are presented as mean ± S.D. (n=3)
However, as the concentration increasing to 600 μg/mL, the survival rate of cells treated with Fe3O4 NPs obviously decreased as compared to the control. The early apoptosis of cells treated with Fe3O4 NPs approximated 30%, which were obviously upregulated as compared to the control. For the late apoptosis, Fe3O4 NPs-treated cells was upregulated significantly to 60% as compared to the control, indicating that concentration of Fe3O4 NPs obviously affect cell apoptosis, which predominantly result from disturbing the early and late apoptosis of cells.
3.4 Cell cycle
Cell cycle involves DNA replication and cell separation, consisting of four distinct phases: G1 phase, S phase, G2 phase and M phase. The cell cycle deregulation can induce cell apoptosis [16, 17, 18].We carried out this experiment to illustrate the mechanism of Fe3O4 NPs interfering cell cycle. As can be seen from Figure 4C and 4D, G2/M, S and G0/G1 of cells exposed to Fe3O4 NPs with the concentration of μg/mL were regular and were no obviously change as compared to the control, cell cycle phase can be ranked in increasing order: G2/M>S>G0/G1. As the concentration increasing to 600 μg/mL, the cycle of cells exposed to Fe3O4 NPs was disrupted, about 60% and 20% of cell population were separately at S and G0/G1 phase, a primarily S-phase cell-cycle arrest was confirmed. For further exploring the mechanism of S-phase cell-cycle arrest, we performed the intracellular distribution experiment of Fe3O4 NPs. As shown in Figure 5A, Fe3O4 NPs with the concentration of 600 μg/mL internalized by cells mostly distributed in autophagosome and nuclear of cells. Whereas the nanoparticles in the cell nucleus could affect the DNA synthesis, and potentially induced apoptosis, thereby decreased cell proliferation accordingly.

The production of GSH and ROS induced by nanoparticles: (A) Intracellular distribution image of Fe3O4 NPs in cells exposed to Fe3O4 NPs (600 μg/mL) for 3 h. The corresponding image (right) is the magnified image of regional image in A figure. (B) GSH level of cells treated with Fe3O4 NPs for 48h. The ROS images of cells treated separately with control (C) and 9 nm Fe3O4 NPs (D) for 48h. Data are presented as mean ± S.D. (n=3)
3.5 Intracellular glutathione and ROS production
Glutathione (GSH) represents the major intracellular redox buffer in cells, it is the first line of cellular defense mechanism against oxidative injury when nanoparticles was internalized by cells [19, 20, 21]. The experimental results were shown in Figure 5B, Fe3O4 NPs induced a dose-dependent decrease of GSH concentration in MCF-7 cells as compared to the control alone. Especially at the concentration of 1000 μg/mL, the GSH level of cells treated with Fe3O4 NPs significantly decreased to about 5 μM, which induced a reduced by 92% compared to control.
Owing to ROS generation could directly cause oxidative injury and play an important role in cell signaling and regulate inflammatory responses, toxicity of drugs, apoptosis or programmed cell death [22, 23], we then assayed the expressed level of reactive oxygen species (ROS). As can be seen from Figure 5C and 5D, compared with the control, a high green fluorescence intensity was observed in cells treated with Fe3O4 NPs with the concentration of 1000 μg/mL, demonstrating that Fe3O4 NPs induce higher ROS production in MCF-7 cells, In combination with the experimental result of GSH, it can be concluded that the low GSH level induce high ROS expression, and thus result in the oxidative damage and cause cell apoptosis.
3.6 Expression of anti-oxidative genes and proteins
To further investigate the mechanism of Fe3O4 NPs inducing oxidative response in MCF-7 cells, the mRNA expressions of three antioxidant-related genes (HMOX-1, GCLC and GCLM) and their protein levels were measured [24]. We found that the expressions of HMOX-1 mRNA, GCLC mRNA, and GCLM mRNA in cells with treated Fe3O4 NPs were upregulated when compared with the control, moreover, a gradually increasing trend was observed with the incubation concentration enhancing from 10 to 500 μg/mL (Figure 6A). When the incubated concentration ranges from 500 μg/mL to 1000 μg/mL, the expression of HMOX-1 mRNA, GCLC mRNA, and GCLM mRNA in cells treated with Fe3O4 NPs declined, suggesting that the difference of the concentration induce the different toxicity response.

The expression of anti-oxidative genes and proteins induced by nanoparticles: (A) The expression levels of the HMOX-1, GCLC, and GCLM mRNA in MCF-7 cells treated with 10 μg/mL, 50 μg/mL, 100 μg/mL, 500 μg/mL and 1000 μg/mL Fe3O4 NPs 9 nm particle size for 48 h. (B) The expression of anti-oxidative related proteins in MCF-7 cells treated with 10 μg/mL, 50 μg/mL, 100 μg/mL, 500 μg/mL and 1000 μg/mL Fe3O4 NPs with 9 nm particle size for 48 h. Data were presented as mean ± S.D. (n=3)
The expressions of HMOX-1, GCLC, and GCLM protein were then determined using western blotting (Figure 6B). The HMOX-1 protein expression level in cells treated with Fe3O4 NPs was weaker than the GCLC and GCLM protein expression level at the incubation concentration from 0 to 100μg/mL, suggesting that the Fe3O4 NPs induce an oxidative damage that is mainly mediated by disturbing the protein expressions of GCLC and GCLM. However, we also noticed that the expressions of HMOX-1, GCLC and GCLM protein exhibited a minimum expression at the incubated concentration of 1000 μg/mL, which was attributed to a low protein synthesis caused by a high oxidative damage and contributed to induce an effective inhibition for MCF-7 cell growth.
4 Conclusions
In summary, we demonstrated the ultrasmall 9nm Fe3O4 NPs effectively inhibited DNA synthesis and enhanced cell apoptosis by inducing S-phase arrest, which thereby reduced the cell growth and proliferation. In addition, 9nm Fe3O4 NPs remarkably disturbed the expressions of HMOX-1mRNA, GCLCmRNA, and GCLM mRNA, inducing the high ROS production and decreased GSH, leading to a seriously oxidative damage for MCF-7 cells, which make 9 nm Fe3O4 NPs inhibit the growth of MCF-7 cells. These results suggesting 9 nm Fe3O4 NPs have potential to be used as the antitumor drug.
-
Conflict of Interest
Conflict of Interests: The authors declare no conflict of interest regarding the publishing of this paper.
Acknowledgement
This work was founded by the National Natural Science Foundation of China (No.81771968, No.81472842 and No.81560495) and the China Postdoctoral Science Foundation (2017M611589).
References
[1] Baetke S.C., Lammers T., Kiessling F., Applications of nanoparticles for diagnosis and therapy of cancer, Br. J. Radiol., 2015, 88(1054), 20150207.10.1259/bjr.20150207Search in Google Scholar PubMed PubMed Central
[2] Wu T., Ding X., Su B., Soodeen-Lalloo A.K., Zhang L., Shi J.Y., Magnetic resonance imaging of tumor angiogenesis using dual-targeting RGD10-NGR9 ultrasmall superparamagnetic iron oxide nanoparticles, Clin. Transl. Oncol., 2018, 20(5), 599-606.10.1007/s12094-017-1753-8Search in Google Scholar PubMed
[3] Das M., Mishra D., Dhak P., Gupta S., Maiti T.K., Basak A., Pramanik P., Biofunctionalized, phosphonate-grafted, ultrasmall iron oxide nanoparticles for combined targeted cancer therapy and multimodal imaging, Small, 2009, 5(24), 2883-2893.10.1002/smll.200901219Search in Google Scholar PubMed
[4] Valdiglesias V., Kilic G., Costa C., Fernandez-Bertolez N., Pasaro E., Teixeira J.P., Laffon B., Effects of iron oxide nanoparticles: cytotoxicity, genotoxicity, developmental toxicity, and neurotoxicity, Environ. Mol. Mutagen., 2015, 56(2), 125-148.10.1002/em.21909Search in Google Scholar PubMed
[5] Bakand S., Hayes A., Dechsakulthorn F., Nanoparticles: a review of particle toxicology following inhalation exposure, Inhal. Toxicol., 2012, 24(2), 125-135.10.3109/08958378.2010.642021Search in Google Scholar PubMed
[6] Lee K.J., Browning L.M., Nallathamby P.D., Desai T., Cherukuri P.K., Xu X.H., In vivo quantitative study of sized-dependent transport and toxicity of single silver nanoparticles using zebrafish embryos, Chem. Res. Toxicol., 2012, 25(5), 1029-1046.10.1021/tx300021uSearch in Google Scholar PubMed PubMed Central
[7] British Journal of Pharmacology Medina C., Santos-Martinez M.J., Radomski A., Corrigan O.I., Radomski M.W., Nanoparticles: pharmacological and toxicological significance, Br. J. Pharmacol., 2007, 150(5), 552-558.10.1038/sj.bjp.0707130Search in Google Scholar PubMed PubMed Central
[8] Patsula V., Kosinova L., Lovric M., Ferhatovic Hamzic L., Rabyk M., Konefal R., Paruzel A., Slouf M., Herynek V., Gajovic S., Horak D., Superparamagnetic Fe3O4 Nanoparticles: Synthesis by Thermal Decomposition of Iron(III) Glucuronate and Application in Magnetic Resonance Imaging, ACS Appl Mater Interfaces, 2016, 8(11), 7238-7247.10.1021/acsami.5b12720Search in Google Scholar PubMed
[9] Diana C.,Marisa F., Félix C., Eduarda F., Iron Oxide Nanoparticles: An Insight into their Biomedical Applications, Curr. Med. Chem., 2015, 22(15), 1808-1828.10.2174/0929867322666150311151403Search in Google Scholar PubMed
[10] Sato A., Itcho N., Ishiguro H., Okamoto D., Kobayashi N., Kawai K., Kasai H., Kurioka D., Uemura H., Kubota Y., Watanabe M., Magnetic nanoparticles of Fe3O4 enhance docetaxel-induced prostate cancer cell death, Int. J. Nanomed., 2013, 8, 3151-3160.10.2147/IJN.S40766Search in Google Scholar PubMed PubMed Central
[11] Cai W., Wan J., Facile synthesis of superparamagnetic magnetite nanoparticles in liquid polyols, J. Colloid Interface Sci., 2007, 305(2), 366-370.10.1016/j.jcis.2006.10.023Search in Google Scholar PubMed
[12] Kim J.A., Aberg C., Salvati A., Dawson K.A., Role of cell cycle on the cellular uptake and dilution of nanoparticles in a cell population, Nature Nanotech., 2012, 7(1), 62-68.10.1038/nnano.2011.191Search in Google Scholar PubMed
[13] Liu P., Sun Y., Wang Q., Sun Y., Li H., Duan Y., Intracellular trafficking and cellular uptake mechanism of mPEG-PLGA-PLL and mPEG-PLGA-PLL-Gal nanoparticles for targeted delivery to hepatomas, Biomaterials, 2014, 35(2), 760-770.10.1016/j.biomaterials.2013.10.020Search in Google Scholar PubMed
[14] Xie Y., Liu D., Cai C., Chen X., Zhou Y., Wu L., Sun Y., Dai H., Kong X., Liu P., Size-dependent cytotoxicity of Fe3O4 nanoparticles induced by biphasic regulation of oxidative stress in different human hepatoma cells, Int. J. Nanomed., 2016, 11, 3557-3570.10.2147/IJN.S105575Search in Google Scholar PubMed PubMed Central
[15] Yue Y., Behra R., Sigg L., Schirmer K., Silver nanoparticles inhibit fish gill cell proliferation in protein-free culture medium, Nanotoxicology, 2016, 10(8), 1075-1083.10.3109/17435390.2016.1172677Search in Google Scholar PubMed
[16] Viallard J.F., Lacombe F., Belloc F., Pellegrin J.L., Reiffers J., [Molecular mechanisms controlling the cell cycle: fundamental aspects and implications for oncology], Cancer Radiother., 2001, 5(2), 109-129.10.1016/S1278-3218(01)00087-7Search in Google Scholar
[17] Wagner H.P., Cell cycle control and cancer, Indian J. Pediatr., 1998, 65(6), 805-814.10.1007/BF02831338Search in Google Scholar PubMed
[18] Hu Z., Holzschuh J., Driever W., Loss of DDB1 Leads to Transcriptional p53 Pathway Activation in Proliferating Cells, Cell Cycle Deregulation, and Apoptosis in Zebrafish Embryos, PLoS One, 2015, 10(7), e0134299.10.1371/journal.pone.0134299Search in Google Scholar PubMed PubMed Central
[19] Diaz Vivancos P., Wolff T., Markovic J., Pallardo F.V., Foyer C.H., A nuclear glutathione cycle within the cell cycle, Biochem. J., 2010, 431(2), 169-178.10.1042/BJ20100409Search in Google Scholar PubMed
[20] Rahman Q., Abidi P., Afaq F., Schiffmann D., Mossman B.T., Kamp D.W., Athar M., Glutathione redox system in oxidative lung injury, Crit. Rev. Toxicol., 1999, 29(6), 543-568.10.1080/10408449991349276Search in Google Scholar PubMed
[21] Shan X.Q., Aw T.Y., Jones D.P., Glutathione-dependent protection against oxidative injury, Pharmacol. Ther., 1990, 47(1), 61-71.10.1016/0163-7258(90)90045-4Search in Google Scholar PubMed
[22] Biochemical PharmacologyGloire G., Legrand-Poels S., Piette J., NF-kappaB activation by reactive oxygen species: fifteen years later, Biochem. Pharmacol., 2006, 72(11), 1493-1505.10.1016/j.bcp.2006.04.011Search in Google Scholar PubMed
[23] Lander H.M., An essential role for free radicals and derived species in signal transduction, FASEB J., 1997, 11(2), 118-124.10.1096/fasebj.11.2.9039953Search in Google Scholar
[24] Vaz M., Machireddy N., Irving A., Potteti H.R., Chevalier K., Kalvakolanu D., Reddy S.P., Oxidant-induced cell death and Nrf2-dependent antioxidative response are controlled by Fra-1/AP-1, Mol. Cell. Biol., 2012, 32(9), 1694-1709.10.1128/MCB.06390-11Search in Google Scholar PubMed PubMed Central
© 2020 P. Ye et al., published by De Gruyter
This work is licensed under the Creative Commons Attribution 4.0 International License.
Articles in the same Issue
- Research Articles
- Generalized locally-exact homogenization theory for evaluation of electric conductivity and resistance of multiphase materials
- Enhancing ultra-early strength of sulphoaluminate cement-based materials by incorporating graphene oxide
- Characterization of mechanical properties of epoxy/nanohybrid composites by nanoindentation
- Graphene and CNT impact on heat transfer response of nanocomposite cylinders
- A facile and simple approach to synthesis and characterization of methacrylated graphene oxide nanostructured polyaniline nanocomposites
- Ultrasmall Fe3O4 nanoparticles induce S-phase arrest and inhibit cancer cells proliferation
- Effect of aging on properties and nanoscale precipitates of Cu-Ag-Cr alloy
- Effect of nano-strengthening on the properties and microstructure of recycled concrete
- Stabilizing effect of methylcellulose on the dispersion of multi-walled carbon nanotubes in cementitious composites
- Preparation and electromagnetic properties characterization of reduced graphene oxide/strontium hexaferrite nanocomposites
- Interfacial characteristics of a carbon nanotube-polyimide nanocomposite by molecular dynamics simulation
- Preparation and properties of 3D interconnected CNTs/Cu composites
- On factors affecting surface free energy of carbon black for reinforcing rubber
- Nano-silica modified phenolic resin film: manufacturing and properties
- Experimental study on photocatalytic degradation efficiency of mixed crystal nano-TiO2 concrete
- Halloysite nanotubes in polymer science: purification, characterization, modification and applications
- Cellulose hydrogel skeleton by extrusion 3D printing of solution
- Crack closure and flexural tensile capacity with SMA fibers randomly embedded on tensile side of mortar beams
- An experimental study on one-step and two-step foaming of natural rubber/silica nanocomposites
- Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening
- One-pot synthesis of nano titanium dioxide in supercritical water
- Printability of photo-sensitive nanocomposites using two-photon polymerization
- In situ synthesis of expanded graphite embedded with amorphous carbon-coated aluminum particles as anode materials for lithium-ion batteries
- Effect of nano and micro conductive materials on conductive properties of carbon fiber reinforced concrete
- Tribological performance of nano-diamond composites-dispersed lubricants on commercial cylinder liner mating with CrN piston ring
- Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance
- Genetic mechanisms of deep-water massive sandstones in continental lake basins and their significance in micro–nano reservoir storage systems: A case study of the Yanchang formation in the Ordos Basin
- Effects of nanoparticles on engineering performance of cementitious composites reinforced with PVA fibers
- Band gap manipulation of viscoelastic functionally graded phononic crystal
- Pyrolysis kinetics and mechanical properties of poly(lactic acid)/bamboo particle biocomposites: Effect of particle size distribution
- Manipulating conductive network formation via 3D T-ZnO: A facile approach for a CNT-reinforced nanocomposite
- Microstructure and mechanical properties of WC–Ni multiphase ceramic materials with NiCl2·6H2O as a binder
- Effect of ball milling process on the photocatalytic performance of CdS/TiO2 composite
- Berberine/Ag nanoparticle embedded biomimetic calcium phosphate scaffolds for enhancing antibacterial function
- Effect of annealing heat treatment on microstructure and mechanical properties of nonequiatomic CoCrFeNiMo medium-entropy alloys prepared by hot isostatic pressing
- Corrosion behaviour of multilayer CrN coatings deposited by hybrid HIPIMS after oxidation treatment
- Surface hydrophobicity and oleophilicity of hierarchical metal structures fabricated using ink-based selective laser melting of micro/nanoparticles
- Research on bond–slip performance between pultruded glass fiber-reinforced polymer tube and nano-CaCO3 concrete
- Antibacterial polymer nanofiber-coated and high elastin protein-expressing BMSCs incorporated polypropylene mesh for accelerating healing of female pelvic floor dysfunction
- Effects of Ag contents on the microstructure and SERS performance of self-grown Ag nanoparticles/Mo–Ag alloy films
- A highly sensitive biosensor based on methacrylated graphene oxide-grafted polyaniline for ascorbic acid determination
- Arrangement structure of carbon nanofiber with excellent spectral radiation characteristics
- Effect of different particle sizes of nano-SiO2 on the properties and microstructure of cement paste
- Superior Fe x N electrocatalyst derived from 1,1′-diacetylferrocene for oxygen reduction reaction in alkaline and acidic media
- Facile growth of aluminum oxide thin film by chemical liquid deposition and its application in devices
- Liquid crystallinity and thermal properties of polyhedral oligomeric silsesquioxane/side-chain azobenzene hybrid copolymer
- Laboratory experiment on the nano-TiO2 photocatalytic degradation effect of road surface oil pollution
- Binary carbon-based additives in LiFePO4 cathode with favorable lithium storage
- Conversion of sub-µm calcium carbonate (calcite) particles to hollow hydroxyapatite agglomerates in K2HPO4 solutions
- Exact solutions of bending deflection for single-walled BNNTs based on the classical Euler–Bernoulli beam theory
- Effects of substrate properties and sputtering methods on self-formation of Ag particles on the Ag–Mo(Zr) alloy films
- Enhancing carbonation and chloride resistance of autoclaved concrete by incorporating nano-CaCO3
- Effect of SiO2 aerogels loading on photocatalytic degradation of nitrobenzene using composites with tetrapod-like ZnO
- Radiation-modified wool for adsorption of redox metals and potentially for nanoparticles
- Hydration activity, crystal structural, and electronic properties studies of Ba-doped dicalcium silicate
- Microstructure and mechanical properties of brazing joint of silver-based composite filler metal
- Polymer nanocomposite sunlight spectrum down-converters made by open-air PLD
- Cryogenic milling and formation of nanostructured machined surface of AISI 4340
- Braided composite stent for peripheral vascular applications
- Effect of cinnamon essential oil on morphological, flammability and thermal properties of nanocellulose fibre–reinforced starch biopolymer composites
- Study on influencing factors of photocatalytic performance of CdS/TiO2 nanocomposite concrete
- Improving flexural and dielectric properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition
- Scalable fabrication of carbon materials based silicon rubber for highly stretchable e-textile sensor
- Degradation modeling of poly-l-lactide acid (PLLA) bioresorbable vascular scaffold within a coronary artery
- Combining Zn0.76Co0.24S with S-doped graphene as high-performance anode materials for lithium- and sodium-ion batteries
- Synthesis of functionalized carbon nanotubes for fluorescent biosensors
- Effect of nano-silica slurry on engineering, X-ray, and γ-ray attenuation characteristics of steel slag high-strength heavyweight concrete
- Incorporation of redox-active polyimide binder into LiFePO4 cathode for high-rate electrochemical energy storage
- Microstructural evolution and properties of Cu–20 wt% Ag alloy wire by multi-pass continuous drawing
- Transparent ultraviolet-shielding composite films made from dispersing pristine zinc oxide nanoparticles in low-density polyethylene
- Microfluidic-assisted synthesis and modelling of monodispersed magnetic nanocomposites for biomedical applications
- Preparation and piezoresistivity of carbon nanotube-coated sand reinforced cement mortar
- Vibrational analysis of an irregular single-walled carbon nanotube incorporating initial stress effects
- Study of the material engineering properties of high-density poly(ethylene)/perlite nanocomposite materials
- Single pulse laser removal of indium tin oxide film on glass and polyethylene terephthalate by nanosecond and femtosecond laser
- Mechanical reinforcement with enhanced electrical and heat conduction of epoxy resin by polyaniline and graphene nanoplatelets
- High-efficiency method for recycling lithium from spent LiFePO4 cathode
- Degradable tough chitosan dressing for skin wound recovery
- Static and dynamic analyses of auxetic hybrid FRC/CNTRC laminated plates
- Review articles
- Carbon nanomaterials enhanced cement-based composites: advances and challenges
- Review on the research progress of cement-based and geopolymer materials modified by graphene and graphene oxide
- Review on modeling and application of chemical mechanical polishing
- Research on the interface properties and strengthening–toughening mechanism of nanocarbon-toughened ceramic matrix composites
- Advances in modelling and analysis of nano structures: a review
- Mechanical properties of nanomaterials: A review
- New generation of oxide-based nanoparticles for the applications in early cancer detection and diagnostics
- A review on the properties, reinforcing effects, and commercialization of nanomaterials for cement-based materials
- Recent development and applications of nanomaterials for cancer immunotherapy
- Advances in biomaterials for adipose tissue reconstruction in plastic surgery
- Advances of graphene- and graphene oxide-modified cementitious materials
- Theories for triboelectric nanogenerators: A comprehensive review
- Nanotechnology of diamondoids for the fabrication of nanostructured systems
- Material advancement in technological development for the 5G wireless communications
- Nanoengineering in biomedicine: Current development and future perspectives
- Recent advances in ocean wave energy harvesting by triboelectric nanogenerator: An overview
- Application of nanoscale zero-valent iron in hexavalent chromium-contaminated soil: A review
- Carbon nanotube–reinforced polymer composite for electromagnetic interference application: A review
- Functionalized layered double hydroxide applied to heavy metal ions absorption: A review
- A new classification method of nanotechnology for design integration in biomaterials
- Finite element analysis of natural fibers composites: A review
- Phase change materials for building construction: An overview of nano-/micro-encapsulation
- Recent advance in surface modification for regulating cell adhesion and behaviors
- Hyaluronic acid as a bioactive component for bone tissue regeneration: Fabrication, modification, properties, and biological functions
- Theoretical calculation of a TiO2-based photocatalyst in the field of water splitting: A review
- Two-photon polymerization nanolithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications
- A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges
- Stress effect on 3D culturing of MC3T3-E1 cells on microporous bovine bone slices
- Progress in magnetic Fe3O4 nanomaterials in magnetic resonance imaging
- Synthesis of graphene: Potential carbon precursors and approaches
- A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE)
- Advances in layered double hydroxide-based ternary nanocomposites for photocatalysis of contaminants in water
- Analysis of functionally graded carbon nanotube-reinforced composite structures: A review
- Application of nanomaterials in ultra-high performance concrete: A review
- Therapeutic strategies and potential implications of silver nanoparticles in the management of skin cancer
- Advanced nickel nanoparticles technology: From synthesis to applications
- Cobalt magnetic nanoparticles as theranostics: Conceivable or forgettable?
- Progress in construction of bio-inspired physico-antimicrobial surfaces
- From materials to devices using fused deposition modeling: A state-of-art review
- A review for modified Li composite anode: Principle, preparation and challenge
- Naturally or artificially constructed nanocellulose architectures for epoxy composites: A review
Articles in the same Issue
- Research Articles
- Generalized locally-exact homogenization theory for evaluation of electric conductivity and resistance of multiphase materials
- Enhancing ultra-early strength of sulphoaluminate cement-based materials by incorporating graphene oxide
- Characterization of mechanical properties of epoxy/nanohybrid composites by nanoindentation
- Graphene and CNT impact on heat transfer response of nanocomposite cylinders
- A facile and simple approach to synthesis and characterization of methacrylated graphene oxide nanostructured polyaniline nanocomposites
- Ultrasmall Fe3O4 nanoparticles induce S-phase arrest and inhibit cancer cells proliferation
- Effect of aging on properties and nanoscale precipitates of Cu-Ag-Cr alloy
- Effect of nano-strengthening on the properties and microstructure of recycled concrete
- Stabilizing effect of methylcellulose on the dispersion of multi-walled carbon nanotubes in cementitious composites
- Preparation and electromagnetic properties characterization of reduced graphene oxide/strontium hexaferrite nanocomposites
- Interfacial characteristics of a carbon nanotube-polyimide nanocomposite by molecular dynamics simulation
- Preparation and properties of 3D interconnected CNTs/Cu composites
- On factors affecting surface free energy of carbon black for reinforcing rubber
- Nano-silica modified phenolic resin film: manufacturing and properties
- Experimental study on photocatalytic degradation efficiency of mixed crystal nano-TiO2 concrete
- Halloysite nanotubes in polymer science: purification, characterization, modification and applications
- Cellulose hydrogel skeleton by extrusion 3D printing of solution
- Crack closure and flexural tensile capacity with SMA fibers randomly embedded on tensile side of mortar beams
- An experimental study on one-step and two-step foaming of natural rubber/silica nanocomposites
- Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening
- One-pot synthesis of nano titanium dioxide in supercritical water
- Printability of photo-sensitive nanocomposites using two-photon polymerization
- In situ synthesis of expanded graphite embedded with amorphous carbon-coated aluminum particles as anode materials for lithium-ion batteries
- Effect of nano and micro conductive materials on conductive properties of carbon fiber reinforced concrete
- Tribological performance of nano-diamond composites-dispersed lubricants on commercial cylinder liner mating with CrN piston ring
- Supramolecular ionic polymer/carbon nanotube composite hydrogels with enhanced electromechanical performance
- Genetic mechanisms of deep-water massive sandstones in continental lake basins and their significance in micro–nano reservoir storage systems: A case study of the Yanchang formation in the Ordos Basin
- Effects of nanoparticles on engineering performance of cementitious composites reinforced with PVA fibers
- Band gap manipulation of viscoelastic functionally graded phononic crystal
- Pyrolysis kinetics and mechanical properties of poly(lactic acid)/bamboo particle biocomposites: Effect of particle size distribution
- Manipulating conductive network formation via 3D T-ZnO: A facile approach for a CNT-reinforced nanocomposite
- Microstructure and mechanical properties of WC–Ni multiphase ceramic materials with NiCl2·6H2O as a binder
- Effect of ball milling process on the photocatalytic performance of CdS/TiO2 composite
- Berberine/Ag nanoparticle embedded biomimetic calcium phosphate scaffolds for enhancing antibacterial function
- Effect of annealing heat treatment on microstructure and mechanical properties of nonequiatomic CoCrFeNiMo medium-entropy alloys prepared by hot isostatic pressing
- Corrosion behaviour of multilayer CrN coatings deposited by hybrid HIPIMS after oxidation treatment
- Surface hydrophobicity and oleophilicity of hierarchical metal structures fabricated using ink-based selective laser melting of micro/nanoparticles
- Research on bond–slip performance between pultruded glass fiber-reinforced polymer tube and nano-CaCO3 concrete
- Antibacterial polymer nanofiber-coated and high elastin protein-expressing BMSCs incorporated polypropylene mesh for accelerating healing of female pelvic floor dysfunction
- Effects of Ag contents on the microstructure and SERS performance of self-grown Ag nanoparticles/Mo–Ag alloy films
- A highly sensitive biosensor based on methacrylated graphene oxide-grafted polyaniline for ascorbic acid determination
- Arrangement structure of carbon nanofiber with excellent spectral radiation characteristics
- Effect of different particle sizes of nano-SiO2 on the properties and microstructure of cement paste
- Superior Fe x N electrocatalyst derived from 1,1′-diacetylferrocene for oxygen reduction reaction in alkaline and acidic media
- Facile growth of aluminum oxide thin film by chemical liquid deposition and its application in devices
- Liquid crystallinity and thermal properties of polyhedral oligomeric silsesquioxane/side-chain azobenzene hybrid copolymer
- Laboratory experiment on the nano-TiO2 photocatalytic degradation effect of road surface oil pollution
- Binary carbon-based additives in LiFePO4 cathode with favorable lithium storage
- Conversion of sub-µm calcium carbonate (calcite) particles to hollow hydroxyapatite agglomerates in K2HPO4 solutions
- Exact solutions of bending deflection for single-walled BNNTs based on the classical Euler–Bernoulli beam theory
- Effects of substrate properties and sputtering methods on self-formation of Ag particles on the Ag–Mo(Zr) alloy films
- Enhancing carbonation and chloride resistance of autoclaved concrete by incorporating nano-CaCO3
- Effect of SiO2 aerogels loading on photocatalytic degradation of nitrobenzene using composites with tetrapod-like ZnO
- Radiation-modified wool for adsorption of redox metals and potentially for nanoparticles
- Hydration activity, crystal structural, and electronic properties studies of Ba-doped dicalcium silicate
- Microstructure and mechanical properties of brazing joint of silver-based composite filler metal
- Polymer nanocomposite sunlight spectrum down-converters made by open-air PLD
- Cryogenic milling and formation of nanostructured machined surface of AISI 4340
- Braided composite stent for peripheral vascular applications
- Effect of cinnamon essential oil on morphological, flammability and thermal properties of nanocellulose fibre–reinforced starch biopolymer composites
- Study on influencing factors of photocatalytic performance of CdS/TiO2 nanocomposite concrete
- Improving flexural and dielectric properties of carbon fiber epoxy composite laminates reinforced with carbon nanotubes interlayer using electrospray deposition
- Scalable fabrication of carbon materials based silicon rubber for highly stretchable e-textile sensor
- Degradation modeling of poly-l-lactide acid (PLLA) bioresorbable vascular scaffold within a coronary artery
- Combining Zn0.76Co0.24S with S-doped graphene as high-performance anode materials for lithium- and sodium-ion batteries
- Synthesis of functionalized carbon nanotubes for fluorescent biosensors
- Effect of nano-silica slurry on engineering, X-ray, and γ-ray attenuation characteristics of steel slag high-strength heavyweight concrete
- Incorporation of redox-active polyimide binder into LiFePO4 cathode for high-rate electrochemical energy storage
- Microstructural evolution and properties of Cu–20 wt% Ag alloy wire by multi-pass continuous drawing
- Transparent ultraviolet-shielding composite films made from dispersing pristine zinc oxide nanoparticles in low-density polyethylene
- Microfluidic-assisted synthesis and modelling of monodispersed magnetic nanocomposites for biomedical applications
- Preparation and piezoresistivity of carbon nanotube-coated sand reinforced cement mortar
- Vibrational analysis of an irregular single-walled carbon nanotube incorporating initial stress effects
- Study of the material engineering properties of high-density poly(ethylene)/perlite nanocomposite materials
- Single pulse laser removal of indium tin oxide film on glass and polyethylene terephthalate by nanosecond and femtosecond laser
- Mechanical reinforcement with enhanced electrical and heat conduction of epoxy resin by polyaniline and graphene nanoplatelets
- High-efficiency method for recycling lithium from spent LiFePO4 cathode
- Degradable tough chitosan dressing for skin wound recovery
- Static and dynamic analyses of auxetic hybrid FRC/CNTRC laminated plates
- Review articles
- Carbon nanomaterials enhanced cement-based composites: advances and challenges
- Review on the research progress of cement-based and geopolymer materials modified by graphene and graphene oxide
- Review on modeling and application of chemical mechanical polishing
- Research on the interface properties and strengthening–toughening mechanism of nanocarbon-toughened ceramic matrix composites
- Advances in modelling and analysis of nano structures: a review
- Mechanical properties of nanomaterials: A review
- New generation of oxide-based nanoparticles for the applications in early cancer detection and diagnostics
- A review on the properties, reinforcing effects, and commercialization of nanomaterials for cement-based materials
- Recent development and applications of nanomaterials for cancer immunotherapy
- Advances in biomaterials for adipose tissue reconstruction in plastic surgery
- Advances of graphene- and graphene oxide-modified cementitious materials
- Theories for triboelectric nanogenerators: A comprehensive review
- Nanotechnology of diamondoids for the fabrication of nanostructured systems
- Material advancement in technological development for the 5G wireless communications
- Nanoengineering in biomedicine: Current development and future perspectives
- Recent advances in ocean wave energy harvesting by triboelectric nanogenerator: An overview
- Application of nanoscale zero-valent iron in hexavalent chromium-contaminated soil: A review
- Carbon nanotube–reinforced polymer composite for electromagnetic interference application: A review
- Functionalized layered double hydroxide applied to heavy metal ions absorption: A review
- A new classification method of nanotechnology for design integration in biomaterials
- Finite element analysis of natural fibers composites: A review
- Phase change materials for building construction: An overview of nano-/micro-encapsulation
- Recent advance in surface modification for regulating cell adhesion and behaviors
- Hyaluronic acid as a bioactive component for bone tissue regeneration: Fabrication, modification, properties, and biological functions
- Theoretical calculation of a TiO2-based photocatalyst in the field of water splitting: A review
- Two-photon polymerization nanolithography technology for fabrication of stimulus-responsive micro/nano-structures for biomedical applications
- A review of passive methods in microchannel heat sink application through advanced geometric structure and nanofluids: Current advancements and challenges
- Stress effect on 3D culturing of MC3T3-E1 cells on microporous bovine bone slices
- Progress in magnetic Fe3O4 nanomaterials in magnetic resonance imaging
- Synthesis of graphene: Potential carbon precursors and approaches
- A comprehensive review of the influences of nanoparticles as a fuel additive in an internal combustion engine (ICE)
- Advances in layered double hydroxide-based ternary nanocomposites for photocatalysis of contaminants in water
- Analysis of functionally graded carbon nanotube-reinforced composite structures: A review
- Application of nanomaterials in ultra-high performance concrete: A review
- Therapeutic strategies and potential implications of silver nanoparticles in the management of skin cancer
- Advanced nickel nanoparticles technology: From synthesis to applications
- Cobalt magnetic nanoparticles as theranostics: Conceivable or forgettable?
- Progress in construction of bio-inspired physico-antimicrobial surfaces
- From materials to devices using fused deposition modeling: A state-of-art review
- A review for modified Li composite anode: Principle, preparation and challenge
- Naturally or artificially constructed nanocellulose architectures for epoxy composites: A review