Startseite Corrigendum to: A numerical investigation of optimum angles for solar energy receivers in the eastern part of Algeria
Artikel Open Access

Corrigendum to: A numerical investigation of optimum angles for solar energy receivers in the eastern part of Algeria

Dieses Erratum berichtigt die Onlineversion des folgenden Artikels: https://doi.org/10.1515/ehs-2021-0089
  • Fethi Bennour ORCID logo und Hocine Mzad ORCID logo EMAIL logo
Veröffentlicht/Copyright: 16. Januar 2023
Veröffentlichen auch Sie bei De Gruyter Brill

Corrigendum to: Bennour F. and Mzad H. (2022). A numerical investigation of optimum angles for solar energy receivers in the eastern part of Algeria. Energy Harvesting and Systems; aop (doi:10.1515/ehs-2021-0089).

Unintentionally, the curves (Figures 13–18) introduced in the original publication were related to Algiers (the capital of Algeria) rather than Annaba, the subject of our article.

Otherwise, Table 4 contains some values of Max IT (W/m2) slightly imprecise, issued by the HDKR anisotropic model.

In order to remedy this, we have supplanted the charts of Algiers with those of Annaba and corrected the entries in Table 4, after launching our simulation code.

The authors regret any inconvenience caused; the right Figures 13–18 and the correct entries in Table 4 are given below.

Figure 13: 
Maximum amounts of solar radiation (Jan. 17 and Feb. 16).
Figure 13:

Maximum amounts of solar radiation (Jan. 17 and Feb. 16).

Figure 14: 
Maximum amounts of solar radiation (Mar. 16 and Apr. 15).
Figure 14:

Maximum amounts of solar radiation (Mar. 16 and Apr. 15).

Figure 15: 
Maximum amounts of solar radiation (May 15 and June 11).
Figure 15:

Maximum amounts of solar radiation (May 15 and June 11).

Figure 16: 
Maximum amounts of solar radiation (Jul. 17 and Aug. 16).
Figure 16:

Maximum amounts of solar radiation (Jul. 17 and Aug. 16).

Figure 17: 
Maximum amounts of solar radiation (Sep. 15 and Oct. 15).
Figure 17:

Maximum amounts of solar radiation (Sep. 15 and Oct. 15).

Figure 18: 
Maximum amounts of solar radiation (Nov. 14 and Dec. 10).
Figure 18:

Maximum amounts of solar radiation (Nov. 14 and Dec. 10).

Table 4:

Maximum global radiation on optimal monthly tilts and azimuth orientations.

HDKR anisotropic
Month Jan. Feb. Mar. Apr. May Jun. Jul. Aug. Sep. Oct. Nov. Dec.
Mean day 17 16 16 15 15 11 17 16 15 15 14 10
Max IT, (W/m2) 455 692 827 1034 1025 870 1018 925 753 945 754 921
Β 61° 57° 48° 33° 22° 18° 19° 29° 45° 52° 60° 64°
a w 15° −5° −5° −5°

Perez anisotropic

Max IT, (W/m2) 435 675 822 1034 1029 880 1026 944 767 955 752 909
Β 52° 49° 42° 31° 22° 18° 19° 28° 37° 49° 57° 62°
a w 15° −5° −5° −5°

Corresponding author: Hocine Mzad, Mechanical Engineering, Department, Badji Mokhtar University, P.O. Box 12, DZ-23005, Annaba, Algeria, E-mail:

Published Online: 2023-01-16

© 2024 the author(s), published by De Gruyter, Berlin/Boston

This work is licensed under the Creative Commons Attribution 4.0 International License.

Artikel in diesem Heft

  1. Solar photovoltaic-integrated energy storage system with a power electronic interface for operating a brushless DC drive-coupled agricultural load
  2. Analysis of 1-year energy data of a 5 kW and a 122 kW rooftop photovoltaic installation in Dhaka
  3. Reviews
  4. Real yields and PVSYST simulations: comparative analysis based on four photovoltaic installations at Ibn Tofail University
  5. A comprehensive approach of evolving electric vehicles (EVs) to attribute “green self-generation” – a review
  6. Exploring the piezoelectric porous polymers for energy harvesting: a review
  7. A strategic review: the role of commercially available tools for planning, modelling, optimization, and performance measurement of photovoltaic systems
  8. Comparative assessment of high gain boost converters for renewable energy sources and electrical vehicle applications
  9. A review of green hydrogen production based on solar energy; techniques and methods
  10. A review of green hydrogen production by renewable resources
  11. A review of hydrogen production from bio-energy, technologies and assessments
  12. A systematic review of recent developments in IoT-based demand side management for PV power generation
  13. Research Articles
  14. Hybrid optimization strategy for water cooling system: enhancement of photovoltaic panels performance
  15. Solar energy harvesting-based built-in backpack charger
  16. A power source for E-devices based on green energy
  17. Theoretical and experimental investigation of electricity generation through footstep tiles
  18. Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids
  19. Comparative energy and exergy analysis of a CPV/T system based on linear Fresnel reflectors
  20. Investigating the effect of green composite back sheet materials on solar panel output voltage harvesting for better sustainable energy performance
  21. Electrical and thermal modeling of battery cell grouping for analyzing battery pack efficiency and temperature
  22. Intelligent techno-economical optimization with demand side management in microgrid using improved sandpiper optimization algorithm
  23. Investigation of KAPTON–PDMS triboelectric nanogenerator considering the edge-effect capacitor
  24. Design of a novel hybrid soft computing model for passive components selection in multiple load Zeta converter topologies of solar PV energy system
  25. A novel mechatronic absorber of vibration energy in the chimney
  26. An IoT-based intelligent smart energy monitoring system for solar PV power generation
  27. Large-scale green hydrogen production using alkaline water electrolysis based on seasonal solar radiation
  28. Evaluation of performances in DI Diesel engine with different split injection timings
  29. Optimized power flow management based on Harris Hawks optimization for an islanded DC microgrid
  30. Experimental investigation of heat transfer characteristics for a shell and tube heat exchanger
  31. Fuzzy induced controller for optimal power quality improvement with PVA connected UPQC
  32. Impact of using a predictive neural network of multi-term zenith angle function on energy management of solar-harvesting sensor nodes
  33. An analytical study of wireless power transmission system with metamaterials
  34. Hydrogen energy horizon: balancing opportunities and challenges
  35. Development of renewable energy-based power system for the irrigation support: case studies
  36. Maximum power point tracking techniques using improved incremental conductance and particle swarm optimizer for solar power generation systems
  37. Experimental and numerical study on energy harvesting performance thermoelectric generator applied to a screw compressor
  38. Study on the effectiveness of a solar cell with a holographic concentrator
  39. Non-transient optimum design of nonlinear electromagnetic vibration-based energy harvester using homotopy perturbation method
  40. Industrial gas turbine performance prediction and improvement – a case study
  41. An electric-field high energy harvester from medium or high voltage power line with parallel line
  42. FPGA based telecommand system for balloon-borne scientific payloads
  43. Improved design of advanced controller for a step up converter used in photovoltaic system
  44. Techno-economic assessment of battery storage with photovoltaics for maximum self-consumption
  45. Analysis of 1-year energy data of a 5 kW and a 122 kW rooftop photovoltaic installation in Dhaka
  46. Shading impact on the electricity generated by a photovoltaic installation using “Solar Shadow-Mask”
  47. Investigations on the performance of bottle blade overshot water wheel in very low head resources for pico hydropower
  48. Solar photovoltaic-integrated energy storage system with a power electronic interface for operating a brushless DC drive-coupled agricultural load
  49. Numerical investigation of smart material-based structures for vibration energy-harvesting applications
  50. A system-level study of indoor light energy harvesting integrating commercially available power management circuitry
  51. Enhancing the wireless power transfer system performance and output voltage of electric scooters
  52. Harvesting energy from a soldier's gait using the piezoelectric effect
  53. Study of technical means for heat generation, its application, flow control, and conversion of other types of energy into thermal energy
  54. Theoretical analysis of piezoceramic ultrasonic energy harvester applicable in biomedical implanted devices
  55. Corrigendum
  56. Corrigendum to: A numerical investigation of optimum angles for solar energy receivers in the eastern part of Algeria
  57. Special Issue: Recent Trends in Renewable Energy Conversion and Storage Materials for Hybrid Transportation Systems
  58. Typical fault prediction method for wind turbines based on an improved stacked autoencoder network
  59. Power data integrity verification method based on chameleon authentication tree algorithm and missing tendency value
  60. Fault diagnosis of automobile drive based on a novel deep neural network
  61. Research on the development and intelligent application of power environmental protection platform based on big data
  62. Diffusion induced thermal effect and stress in layered Li(Ni0.6Mn0.2Co0.2)O2 cathode materials for button lithium-ion battery electrode plates
  63. Improving power plant technology to increase energy efficiency of autonomous consumers using geothermal sources
  64. Energy-saving analysis of desalination equipment based on a machine-learning sequence modeling
Heruntergeladen am 7.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ehs-2023-2001/html?lang=de
Button zum nach oben scrollen