Erratum to “Effect of PVA fiber on mechanical properties of fly ash-based geopolymer concrete”

Articles in the same Issue

1. Review Articles
2. A review on filler materials for brazing of carbon-carbon composites
3. Nanotechnology-based materials as emerging trends for dental applications
4. A review on allotropes of carbon and natural filler-reinforced thermomechanical properties of upgraded epoxy hybrid composite
5. High-temperature tribological properties of diamond-like carbon films: A review
6. A review of current physical techniques for dispersion of cellulose nanomaterials in polymer matrices
7. Review on structural damage rehabilitation and performance assessment of asphalt pavements
8. Recent development in graphene-reinforced aluminium matrix composite: A review
9. Mechanical behaviour of precast prestressed reinforced concrete beam–column joints in elevated station platforms subjected to vertical cyclic loading
10. Effect of polythiophene thickness on hybrid sensor sensitivity
11. Investigation on the relationship between CT numbers and marble failure under different confining pressures
12. Finite element analysis on the bond behavior of steel bar in salt–frost-damaged recycled coarse aggregate concrete
13. From passive to active sorting in microfluidics: A review
14. Research Articles
15. Revealing grain coarsening and detwinning in bimodal Cu under tension
16. Mesoporous silica nanoparticles functionalized with folic acid for targeted release Cis-Pt to glioblastoma cells
17. Magnetic behavior of Fe-doped of multicomponent bismuth niobate pyrochlore
18. Study of surfaces, produced with the use of granite and titanium, for applications with solar thermal collectors
19. Magnetic moment centers in titanium dioxide photocatalysts loaded on reduced graphene oxide flakes
20. Mechanical model and contact properties of double row slewing ball bearing for wind turbine
21. Sandwich panel with in-plane honeycombs in different Poisson's ratio under low to medium impact loads
22. Effects of load types and critical molar ratios on strength properties and geopolymerization mechanism
23. Nanoparticles in enhancing microwave imaging and microwave Hyperthermia effect for liver cancer treatment
24. FEM micromechanical modeling of nanocomposites with carbon nanotubes
25. Effect of fiber breakage position on the mechanical performance of unidirectional carbon fiber/epoxy composites
26. Removal of cadmium and lead from aqueous solutions using iron phosphate-modified pollen microspheres as adsorbents
27. Load identification and fatigue evaluation via wind-induced attitude decoupling of railway catenary
28. Residual compression property and response of honeycomb sandwich structures subjected to single and repeated quasi-static indentation
29. Experimental and modeling investigations of the behaviors of syntactic foam sandwich panels with lattice webs under crushing loads
30. Effect of storage time and temperature on dissolved state of cellulose in TBAH-based solvents and mechanical property of regenerated films
31. Thermal analysis of postcured aramid fiber/epoxy composites
32. The energy absorption behavior of novel composite sandwich structures reinforced with trapezoidal latticed webs
33. Experimental study on square hollow stainless steel tube trusses with three joint types and different brace widths under vertical loads
34. Thermally stimulated artificial muscles: Bio-inspired approach to reduce thermal deformation of ball screws based on inner-embedded CFRP
35. Abnormal structure and properties of copper–silver bar billet by cold casting
36. Dynamic characteristics of tailings dam with geotextile tubes under seismic load
37. Study on impact resistance of composite rocket launcher
38. Effects of TVSR process on the dimensional stability and residual stress of 7075 aluminum alloy parts
39. Dynamics of a rotating hollow FGM beam in the temperature field
40. Development and characterization of bioglass incorporated plasma electrolytic oxidation layer on titanium substrate for biomedical application
41. Effect of laser-assisted ultrasonic vibration dressing parameters of a cubic boron nitride grinding wheel on grinding force, surface quality, and particle morphology
42. Vibration characteristics analysis of composite floating rafts for marine structure based on modal superposition theory
43. Trajectory planning of the nursing robot based on the center of gravity for aluminum alloy structure
44. Effect of scan speed on grain and microstructural morphology for laser additive manufacturing of 304 stainless steel
45. Influence of coupling effects on analytical solutions of functionally graded (FG) spherical shells of revolution
46. Improving the precision of micro-EDM for blind holes in titanium alloy by fixed reference axial compensation
47. Electrolytic production and characterization of nickel–rhenium alloy coatings
48. DC magnetization of titania supported on reduced graphene oxide flakes
49. Analytical bond behavior of cold drawn SMA crimped fibers considering embedded length and fiber wave depth
50. Structural and hydrogen storage characterization of nanocrystalline magnesium synthesized by ECAP and catalyzed by different nanotube additives
51. Mechanical property of octahedron Ti6Al4V fabricated by selective laser melting
52. Physical analysis of TiO₂ and bentonite nanocomposite as adsorbent materials
53. The optimization of friction disc gear-shaping process aiming at residual stress and machining deformation
54. Optimization of EI961 steel spheroidization process for subsequent use in additive manufacturing: Effect of plasma treatment on the properties of EI961 powder
55. Effect of ultrasonic field on the microstructure and mechanical properties of sand-casting AlSi7Mg0.3 alloy
56. Influence of different material parameters on nonlinear vibration of the cylindrical skeleton supported prestressed fabric composite membrane
57. Investigations of polyamide nano-composites containing bentonite and organo-modified clays: Mechanical, thermal, structural and processing performances
58. Conductive thermoplastic vulcanizates based on carbon black-filled bromo-isobutylene-isoprene rubber (BIIR)/polypropylene (PP)
59. Effect of bonding time on the microstructure and mechanical properties of graphite/Cu-bonded joints
60. Study on underwater vibro-acoustic characteristics of carbon/glass hybrid composite laminates
61. A numerical study on the low-velocity impact behavior of the Twaron^® fabric subjected to oblique impact
62. Erratum
63. Erratum to “Effect of PVA fiber on mechanical properties of fly ash-based geopolymer concrete”
64. Topical Issue on Advances in Infrastructure or Construction Materials – Recycled Materials, Wood, and Concrete
65. Structural performance of textile reinforced concrete sandwich panels under axial and transverse load
66. An overview of bond behavior of recycled coarse aggregate concrete with steel bar
67. Development of an innovative composite sandwich matting with GFRP facesheets and wood core
68. Relationship between percolation mechanism and pore characteristics of recycled permeable bricks based on X-ray computed tomography
69. Feasibility study of cement-stabilized materials using 100% mixed recycled aggregates from perspectives of mechanical properties and microstructure
70. Effect of PVA fiber on mechanical properties of fly ash-based geopolymer concrete
71. Research on nano-concrete-filled steel tubular columns with end plates after lateral impact
72. Dynamic analysis of multilayer-reinforced concrete frame structures based on NewMark-β method
73. Experimental study on mechanical properties and microstructures of steel fiber-reinforced fly ash-metakaolin geopolymer-recycled concrete
74. Fractal characteristic of recycled aggregate and its influence on physical property of recycled aggregate concrete
75. Properties of wood-based composites manufactured from densified beech wood in viscoelastic and plastic region of the force-deflection diagram (FDD)
76. Durability of geopolymers and geopolymer concretes: A review
77. Research progress on mechanical properties of geopolymer recycled aggregate concrete