Startseite Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy

  • Frédéric Diologent EMAIL logo , Pierre Caron , Thierry d’Almeida , Sylvain Chambreland , Alain Jacques und Pierre Bastie
Veröffentlicht/Copyright: 12. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 8

Abstract

The strain distribution in a new generation nickel-based single crystal superalloy has been determined in the temperature range 293 K– 1598 K. Measurements have been performed using diffraction of high energy synchrotron radiation (150 keV, λ = 0.008 nm) to determine the variations with temperature of the γ/γ′ lattice mismatch and of the γ′ volume fraction. The chemical segregation at the dendrite scale and the internal stress induce a large range of values for the lattice mismatch. The measurements of the γ′ volume fraction determined by X-ray diffraction are in agreement with those obtained by atom probe tomography, image analysis or computation.

Keywords: Superalloys; Single crystal; X-ray diffraction; Lattice misfit
Dr. Frédéric Diologent Laboratoire de métallurgie mécanique, Ecole Polytechnique Fédérale de Lausanne CH-1015 Lausanne, Switzerland Tel.: +41 21 693 48 57 Fax: +41 21 693 46 64

  1. This work was partially funded by Snecma under Contract N° 670002. The authors would like to thank A. Schnell from Alstom Power for having provided with JMat Pro data and the ESRF for the beam time allocation.

References

[1] P. Caron, in: T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson, J.J. Schirra (Eds.), Superalloys 2000, TMS, Warrendale, PA, USA (2000) 737.10.7449/2000/Superalloys_2000_737_746Suche in Google Scholar

[2] H. Biermann, M. Strehler, H. Mughrabi: Met. Mater. Trans. A 27 (1996) 1003.10.1007/BF02649768Suche in Google Scholar

[3] G. Bruno, B. Schönfeld, G. Kostorz: Z. Metallkd. 94 (2003) 12.10.3139/146.030012Suche in Google Scholar

[4] F. Pyczak, B. Devrient, H. Mughrabi, in: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, S.Walston (Eds.), Superalloys 2004, TMS, Warrendale, PA, USA (2004) 827.10.7449/2004/Superalloys_2004_827_836Suche in Google Scholar

[5] D. Bellet, P. Bastie: Phil. Mag. B 64 (1991) 135.10.1080/13642819108207609Suche in Google Scholar

[6] L. Müller, T. Link, M. Feller-Kniepmeier: Scripta metall. mater. 26 (1992) 1297.10.1016/0956-716X(92)90580-8Suche in Google Scholar

[7] U. Glatzel, A. Müller: Scripta metall. mater. 31 (1994) 285.10.1016/0956-716X(94)90284-4Suche in Google Scholar

[8] U. Glatzel: Scripta metall. mater. 31 (1994) 291.10.1016/0956-716X(94)90285-2Suche in Google Scholar

[9] A. Royer, P. Bastie, in: R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford (Eds.), Superalloys 1996, TMS, Warrendale, PA, USA (1996) 221.10.7449/1996/Superalloys_1996_221_228Suche in Google Scholar

[10] A Royer, P. Bastie, M. Véron: Acta Mater. 46 (1998) 5357.10.1016/S1359-6454(98)00206-7Suche in Google Scholar

[11] R. Gilles, D. Mukherji, D.M. Többens, P. Strunz, B. Barbier, J. Rösler, H. Fuess: Appl. Phys. A 74 [Suppl.] (2002) 1446.10.1007/s003390201742Suche in Google Scholar

[12] U. Brückner, A. Epishin, T. Link: Acta Mater. 45 (1997) 5223.10.1016/S1359-6454(97)00163-8Suche in Google Scholar

[13] H. Biermann, B. Von Grossman, T. Ungar S. Mechsner, A. Souvorov, M. Drakopoulos, A. Snigirev, H. Mughrabi: Acta Mater. 48 (2000) 2221.10.1016/S1359-6454(00)00038-0Suche in Google Scholar

[14] R. Völkl, U. Glatzel, M. Feller-Kniepmeier: Acta Mater. 46 (1998) 4395.10.1016/S1359-6454(98)00085-8Suche in Google Scholar

[15] C. Schulze, M. Feller-Kniepmeier: Mater. Sci. Engng. A 281 (2000) 204.10.1016/S0921-5093(99)00713-3Suche in Google Scholar

[16] K. Ohno, H. Harada, T. Yamagata, M. Yamazaki, K. Ohsumi, in: C.S. Barret, J.V. Gilfrich, R. Jenkins, T.C. Huang, P.K. Predecki (Eds.), 37th Annual Conf. on Applications of X-Ray Analysis, Plenum Press, New York, NY, vol 32 (1989) 36510.1007/978-1-4757-9110-5_45Suche in Google Scholar

[17] A. Royer, P. Bastie: Scripta Mater. 36 (1997) 1151.10.1016/S1359-6462(97)00012-2Suche in Google Scholar

[18] D. Blavette, E. Cadel, B. Deconihout: Mater. Charact. 44 (2000) 133.10.1016/S1044-5803(99)00050-9Suche in Google Scholar

[19] http://www.esrf.fr/computing/scientific/xop/xplot/Suche in Google Scholar

[20] R. Schmidt, M. Feller-Kniepmeier: Scripta metall. mater. 26 (1992) 1919.10.1016/0956-716X(92)90059-NSuche in Google Scholar

[21] S. Duval, S. Chambreland, P. Caron, D. Blavette: Acta metall. mater. 42 (1994) 185.10.1016/0956-7151(94)90061-2Suche in Google Scholar

[22] F. Diologent, Thesis n° 7014, Université Paris XI, France (2002).Suche in Google Scholar

[23] N. Saunders, Z. Guo, X. Li, AP. Miodownik, J-Ph. Schillé: JOM, December (2003) 60.10.1007/s11837-003-0013-2Suche in Google Scholar

[24] U. Hemmersmeier, M. Feller-Kniepmeier: Mater. Sci. Engng. A 248 (1998) 87.10.1016/S0921-5093(98)00516-4Suche in Google Scholar

[25] G.E. Fuchs: Mater. Sci. Engng. A 300 (2001) 52.10.1016/S0921-5093(00)01776-7Suche in Google Scholar

[26] R. Bürgel, J. Grossmann, O. Lüsebrink, H. Mughrabi, F. Pyczak, R.F. Singer, A. Volek, in: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, S. Walston (Eds.), Superalloys 2004, TMS, Warrendale, PA, USA (2004) 25.10.7449/2004/Superalloys_2004_25_34Suche in Google Scholar

[27] A. Müller, T. Gnäupel-Herol, W. Reimers: Phys. stat. sol. (a) 156 (1996) 375.10.1002/pssa.2211560215Suche in Google Scholar

[28] T. Grosdidier, A. Hazotte, A. Simon: Scripta metall. mater. 30 (1994) 1257.10.1016/0956-716X(94)90255-0Suche in Google Scholar

[29] R.C. Reed, A.C. Yeh, S. Tin, S.S. Babu, M.K. Miller: Scripta Mater. 51 (2004) 327.10.1016/j.scriptamat.2004.04.019Suche in Google Scholar

[30] T. Yokokawa, M. Osawa, K. Nishida, Y. Koizumi, T. Kobayashi, H. Harada: J. Japan Inst. Metals. 68 (2004) 138.10.2320/jinstmet.68.138Suche in Google Scholar

[31] A. Volek, F. Pyczak, R.F. Singer, H. Mughrabi: Scripta Mater. 52 (2005) 141.10.1016/j.scriptamat.2004.09.013Suche in Google Scholar

[32] P. Nash: Bull. Alloy Phase Diagrams. 7 (1986) 130.10.1007/BF02881548Suche in Google Scholar

[33] Y. Mishima, S. Ochiai, T. Suzuki: Acta metall. 33 (1985) 1161.10.1016/0001-6160(85)90211-1Suche in Google Scholar

[34] J.X. Zhang, Y. Koizumi, H. Harada: Mater. Sci. For. 475–479 (2005) 623.10.4028/www.scientific.net/MSF.475-479.623Suche in Google Scholar

[35] R. Roebuck, D. Cox, R. Reed: Scripta Mater. 44 (2001) 917.10.1016/S1359-6462(00)00662-XSuche in Google Scholar
Received: 2005-09-05
Accepted: 2006-02-24
Published Online: 2022-01-12

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
https://doi.org/10.1515/ijmr-2006-0179
Schlagwörter für diesen Artikel
Superalloys; Single crystal; X-ray diffraction; Lattice misfit

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 27.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0179/html
Button zum nach oben scrollen