Home Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
Article
Licensed
Unlicensed Requires Authentication

Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr

  • I. S. Golovin EMAIL logo , A. Strahl and H. Neuhäuser
Published/Copyright: January 12, 2022
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 97 Issue 8

Abstract

The anelasticity of binary Fe –Al and ternary Fe –Al –Me (Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr) alloys has been studied by mechanical spectroscopy in the Hz and kHz ranges. Relaxation peaks due to point defects – Snoek effect (S) with carbon interstitial jumps, carbon-vacancy complexes (X peak), Zener effect (Z), dislocations (D), and grain boundaries (GB) – are observed and their changes with addition of the third element are used to corroborate the respective proposed relaxation mechanisms, taking account of the changes of structure and order in the alloys which contain up to 5Co, 25Cr, 25Ge, 5Mn, 0.3Nb, 25Si, 6Ta, 4Ti, and 15Zr (all in at.%), respectively. In addition, some data of ordering temperatures, Curie temperatures, and hardness are provided for several alloys.

Keywords: Fe–Al alloys; Ordering; Mechanical spectroscopy; Internal friction; Anelastic relaxation
Prof. Dr. I. S. Golovin Physics of Metals and Materials Science Department Tula State University Lenin ave. 90, 300600 Tula, Russia Tel.: +7 4872 350 581

References

[1] G. Sauthoff: Intermetallics, VCH, Weinheim 1995.10.1002/9783527615414Search in Google Scholar

[2] C.G. McKamey, in: N.S. Stoloff, V.K. Sikka (Eds.), Physical Metallurgy and Processing of Intermetallic Compounds, Chapman & Hall, London 1996, p. 351.10.1007/978-1-4613-1215-4_9Search in Google Scholar

[3] F. Kral, P. Schwander, G. Kostorz: Acta Mater. 45 (1997) 675.10.1016/S1359-6454(96)00181-4Search in Google Scholar

[4] D.G. Morris: Intermetallics 6 (1998) 753.10.1016/S0966-9795(98)00028-4Search in Google Scholar

[5] N.S. Stoloff: Mater. Sci. Eng. A 258 (1998) 1.10.1016/S0921-5093(98)00909-5Search in Google Scholar

[6] G. Gremaud, in: R. Schaller, G. Fantozzi, G. Gremaud (Eds.), Mechanical Spectroscopy Q–1 2001, Trans-Tech Publ, Zürich 2001, p. 178.Search in Google Scholar

[7] A.B. Lebedev: Sov. Phys. Sol. St. 34 (1992) 1008; A.B. Lebedev, V.I. Ivanov: Mater. Sci. Forum 119–121 (1993) 245.Search in Google Scholar

[8] I.S. Golovin, H. Neuhäuser, A. Rivière, A. Strahl: Intermetallics 12 (2004) 125.10.1016/j.intermet.2003.10.003Search in Google Scholar

[9] A. Strahl, S.B. Golovina, I.S. Golovin, H. Neuhäuser: J. All. Comp. 370 (2004) 268.10.1016/j.jallcom.2003.10.066Search in Google Scholar

[10] D.B. Fischbach: Acta Met. 10 (1962) 319.10.1016/0001-6160(62)90009-3Search in Google Scholar

[11] I.S. Golovin, S.B. Golovina, A. Strahl, H. Neuhäuser, T.S. Pavlova, S.A. Golovin, R. Schaller: Scr. Mater. 50 (2004) 1187.10.1016/j.scriptamat.2003.12.020Search in Google Scholar

[12] T.S. Pavlova, T.V. Pozdova, I.S. Golovin, in: Reports of Tula State University, Materials Science, Tula, 2002, n2, p. 95 (in Russian).Search in Google Scholar

[13] A. Nagy, U. Harms, F. Klose, H. Neuhäuser: Mater. Sci. Eng. A 324 (2002) 72.10.1016/S0921-5093(01)01285-0Search in Google Scholar

[14] I.S. Golovin, S.B. Golovina, C. Grusewski, H.-R. Sinning, A. Strahl, H. Neuhäuser: Reports Russian Academy of Sciences (RAS), Physics 69, 8 (2005)1173 (in Russian).Search in Google Scholar

[15] J.C. Shyne, M.J. Sinnott: Trans AIME 218 (1960) 861.Search in Google Scholar

[16] J.A. Hren: phys. stat. sol. 3 (1963) 1603.10.1002/pssb.19630030907Search in Google Scholar

[17] I.S. Golovin, O.A. Lambri, A. Strahl, J.A. Cano, C. Siemers: to be submittedSearch in Google Scholar

[18] H.E. Schaefer, B. Damson, M.Weller, E. Arzt, E.P. George: phys. stat. sol. (a) 160 (1997) 531.10.1002/1521-396X(199704)160:2<531::AID-PSSA531>3.0.CO;2-7Search in Google Scholar

[19] Z.C. Zhou, F.S. Han, Z.Y. Gao: Acta Mater. 52 (2004) 4049.10.1016/j.actamat.2004.05.020Search in Google Scholar

[20] N.Ya. Rokhmanov: Functional Materials 7 (2000) 235.Search in Google Scholar

[21] M. Bougenhour, D. Hamana, N.Ya. Rokhmanov, V.M. Andronov: Rev. Métall. (2004) 663.10.1051/metal:2004114Search in Google Scholar

[22] I.S. Golovin, S.V. Divinski, J.Čížek, I. Procházka, F. Stein: Acta Mater. 53 (2005) 2581.10.1016/j.actamat.2005.02.017Search in Google Scholar

[23] J. Laakmann, Ch. Hartig, H. Mecking: Z. Metallkd. 94 (2003) 526.10.3139/146.030526Search in Google Scholar

[24] R.G. Baligidad, Mater. Sci. Eng. A 368 (2004) 131.10.1016/j.msea.2003.10.243Search in Google Scholar

[25] F. Stein, A. Schneider, G. Frommeyer: Intermetallics 11 (2003) 71.10.1016/S0966-9795(02)00187-5Search in Google Scholar

[26] A. Glezer, B.V. Molotilov: Ordering and Deformation of Iron Alloys. Moscow, Metallurgia, 1984 (in Russian).Search in Google Scholar

[27] P.L. Gruzin, V.S. Mkrtchan, U.L. Rodionov, I.P. Selisskij, M.K. Khachatrjan: Fiz. metal. metal. 34 (1972) 316.Search in Google Scholar

[28] M. Koiwa: Phil. Mag. 24 (1971) 81, 107, 539, 799; 25 (1971) 701.10.1080/14786437108216426Search in Google Scholar

[29] V.W. Jäniche, J. Braunen, W. Heller: Arch. Eisenhüttenwesen 37 (1966) 719.10.1002/srin.196604573Search in Google Scholar

[30] K. Tanaka: J. Phys. Soc. Japan 30 (1971) 404.10.1143/JPSJ.30.404Search in Google Scholar

[31] I.S. Golovin, M.S. Blanter, T.V. Pozdova, K. Tanaka, L.B. Magalas: phys. stat. sol. (a) 168 (1998) 403.10.1002/(SICI)1521-396X(199808)168:2<403::AID-PSSA403>3.0.CO;2-2Search in Google Scholar

[32] A. Strahl, I.S. Golovin, S.B. Golovina, H. Neuhäuser, H.-R. Sinning: ICIFMS-14 (Kyoto Sept. 2005), Mater. Sci. Eng. A (in press).Search in Google Scholar

[33] M.S. Blanter, I.S. Golovin, H.-R. Sinning: ICIFMS-14 (Kyoto Sept. 2005) Mater. Sci. Eng. A (in press).Search in Google Scholar

[34] M.S. Blanter, Yu.A. Pigusov (Eds.): Internal Friction Method in Physical Metallurgy Researches, Metallurgia, Moscow 1991 (in Russian).Search in Google Scholar

[35] S.A. Golovin, S.I. Arkhangelskij: Problemi Prochnosti 5 (1972) 120 (in Russian).Search in Google Scholar

[36] K. Bothe, H. Neuhäuser: Scripta Met. 16 (1982) 1053; J. Non-Cryst. Sol. 56 (1983) 279.10.1016/0036-9748(82)90455-0Search in Google Scholar

[37] U. Harms, L. Kempen, H. Neuhäuser: Rev. Sci. Instr. 70 (1999) 6810.1063/1.1149508Search in Google Scholar

[38] H.-R. Sinning: J. Phys. Cond. Matter 3 (1991) 2005.10.1088/0953-8984/3/13/004Search in Google Scholar

[39] C. Wert: J. Appl. Phys. 26 (1955) 640.10.1063/1.1722059Search in Google Scholar

[40] V.A. Udovenko, I.B. Chudakov, N.A. Polyakova, in: A. Wolfenden, V. Kinra (Eds.),M3D III, Mechanics and Mechanisms of Material Damping, ASTM STP 1304 ASTM, Philadelphia, 1997, p. 204.10.1520/STP11749SSearch in Google Scholar

[41] A. Taylor, R.M. Jones: J. Phys. Chem. Solids 6 (1958) 16.10.1016/0022-3697(58)90213-0Search in Google Scholar

[42] O. Kubaschewski: Iron-Binary Phase Diagrams. Berlin: Springer-Verlag 1982.Search in Google Scholar

[43] Phase Diagrams of Binary Iron Alloys. Monograph Series on Alloy Phase Diagrams. ASM International, 1993.Search in Google Scholar

[44] I.S. Golovin, T.S. Pavlova, Chr. Grusewski, Y. Ivanisenko, D. Gunderov, in: Nanomaterials by Severe Plastic Deformation, Trans. Tech. Publ., Mater. Sci. Forum 503–504 (2005) 745.10.4028/www.scientific.net/MSF.503-504.745Search in Google Scholar

[45] S.A. Golovin, A.A. Morozyuk, V.S. Ageev, in: Internal Friction in Metals, Semiconductors, Dielectrics and Ferromagnets, Nauka, Moscow 1978, p. 41.Search in Google Scholar

[46] H.S. Saitoh, N. Yoshinaga, K. Ushioda: Acta Mater. 52 (2004) 1255.10.1016/j.actamat.2003.11.009Search in Google Scholar

[47] I.G. Ritchie, R. Rawlings: Acta Metall. 15 (1967) 491.10.1016/0001-6160(67)90081-8Search in Google Scholar

[48] I.S. Golovin: J. Alloys Comp. 310 (2000) 356.10.1016/S0925-8388(00)00969-5Search in Google Scholar

[49] M. Weller, in: R. Schaller, G. Fantozzi, G. Gremaud (Eds.), Mechanical Spectroscopy Q– 1 2001 with Applications to Materials Science, Trans Tech Publ, Mater. Sci. Forum 366–368 (2001) 95.10.4028/www.scientific.net/MSF.366-368.615Search in Google Scholar

[50] W. Pascheto, G.P. Johari: Met. Mater. Trans. A 27 (1996) 2461.10.1007/BF02652340Search in Google Scholar

[51] T.V. Pozdova, I.S. Golovin: Solid State Phenomena 89/90 (2003) 279.10.4028/www.scientific.net/SSP.89.279Search in Google Scholar

[52] I.S. Golovin, T.V. Pozdova, N.Ya Rokhmanov, D. Mukherji: Met. Mater. Trans. A 34 (2003) 255.10.1007/s11661-003-0327-2Search in Google Scholar

[53] C. Zener: Elasticity and Anelasticity of Metals, The Univ. of Chicago Press, Chicago 1948.Search in Google Scholar

[54] A.S. Nowick, B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York 1972.Search in Google Scholar

[55] I.S. Golovin, A. Rivière: Intermetallics 14 (2005) 570.10.1016/j.intermet.2005.09.010Search in Google Scholar

[56] I.S. Golovin, A. Rivière: ICIFMS-14 (Kyoto Sept. 2005) Mater. Sci. Eng. A (in press).Search in Google Scholar

[57] K. Tanaka, K. Sahashi: Trans. Japan. Inst. Met. 3 (1971) 130.10.2320/matertrans1960.12.130Search in Google Scholar

[58] K. Tanaka: Trans. Japan. Inst. Met. 16 (1975) 199.10.2320/matertrans1960.16.199Search in Google Scholar

[59] Zhengcun Zhou, Thangyong Gao, Fusheng Han: J. Phys. Cond. Matt. 15 (2003) 6809.10.1088/0953-8984/15/40/017Search in Google Scholar

[60] M. Salamon, H. Mehrer: Z. Metallkd. 96 (2005) 4.10.3139/146.018071Search in Google Scholar

[61] A. Gude, H. Mehrer: Phil. Mag. A 76 (1997) 1.10.1080/01418619708209959Search in Google Scholar

[62] S. Peteline, E.M.T. Njiokep, S. Divinski, H. Mehrer: Def. Diff. Forum 216/217 (2003) 175.10.4028/www.scientific.net/DDF.216-217.175Search in Google Scholar

[63] F. Stein, G. Sauthoff, M. Palm: Z. Metallkd. 95 (2004) 469.10.3139/146.017985Search in Google Scholar

[64] R. Ducher, F. Stein, B. Viguier, M. Palm, J. Lacaze: Z. Metallkd. 94 (2003) 396.10.3139/146.030396Search in Google Scholar

[65] A. Schneider, L. Falat, G. Sauthoff, G. Frommeyer: Intermetallics 11 (2003) 443.10.1016/S0966-9795(03)00018-9Search in Google Scholar

[66] D.D. Risanti, G. Sauthoff: Intermetallics 12 (2005) 1313.10.1016/j.intermet.2004.12.029Search in Google Scholar

[67] I.S. Golovin, in: Proc. International Conference on Imperfections Interaction and Anelasticity Phenomena in Solids, Tula, Nov. 13–15, 2001, Tula, 2002, p. 47.Search in Google Scholar

[68] V. Sima: J. All.Comp. 378 (2004) 44.10.1016/j.jallcom.2003.11.166Search in Google Scholar

[69] Sun Zuquing, Yang Wangyue, Shen Lizhen, Huang Yuanding, Zhang Baisheng, Yand Jilian: Mater. Sci. Eng. A 258 (1998) 2557.10.1016/S0921-5093(98)00919-8Search in Google Scholar

[70] I.S. Golovin, M.S. Blanter, R. Schaller: phys. stat. sol. (a) 160 (1997) 49.10.1002/1521-396X(199703)160:1<49::AID-PSSA49>3.0.CO;2-PSearch in Google Scholar

[71] Z.C. Zhou, F.S. Han: phys. stat. sol. (a) 199 (2003) 202.10.1002/pssa.200306653Search in Google Scholar

[72] O.A. Lambri, J.L. Pérez-Landazábal, J.A. Cano, V. Recarte: Mater. Sci. Eng. A 370 (2004) 459.10.1016/j.msea.2003.06.006Search in Google Scholar

[73] T.S. Pavlova, I.S. Golovin, H.-R. Sinning, S.A. Golovin, C. Siemers: Intermetallics 14 (2006) (in press).10.1016/j.intermet.2005.12.015Search in Google Scholar

[74] T.S. Pavlova, I.S. Golovin, in: Reports of Tula State University: Materials Science, vol. 5 (2004) 48.Search in Google Scholar

[75] G. Athanassiadis, G. Le Gaer, J. Foct, L. Rimlinger: phys. stat. sol. (a) 40 (1977) 425.10.1002/pssa.2210400208Search in Google Scholar

[76] A. Brinck, C. Engelke, H. Neuhäuser, G. Molenat, H. Rösner, E. Nembach: Mater. Sci. Eng. A 258 (1998) 32.10.1016/S0921-5093(98)00913-7Search in Google Scholar

[77] A. Brinck, H. Neuhäuser: Mater. Sci. Eng. A 387–389 (2004) 969.10.1016/j.msea.2004.05.041Search in Google Scholar

[78] M.S. Blanter, I.S. Golovin, H.-R. Sinning: Scripta Mater. 52 (2005) 57.10.1016/j.scriptamat.2004.08.030Search in Google Scholar

[79] I.S. Golovin, S.B. Golovina: Fiz. Metal. Metal. (Dec. 2006) (in Russian) (in press).Search in Google Scholar
Received: 2005-10-18
Accepted: 2006-02-13
Published Online: 2022-01-12

© 2006 Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
https://doi.org/10.1515/ijmr-2006-0170
Keywords for this article
Fe–Al alloys; Ordering; Mechanical spectroscopy; Internal friction; Anelastic relaxation

Articles in the same Issue

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 24.9.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0170/html
Scroll to top button