Personal

Articles in the same Issue

1. Contents
2. Extended editorial with anecdotes
3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
5. Calorimetric investigation of the binary Cu–In system
6. Thermodynamic properties of liquid Cu–In–Zn alloys
7. Comparing the thermodynamic behaviour of Al(l) + ZrO₂(4% Y₂O₃) and Al(l) + Al₂O₃
8. Failure-mode dependence of the strengthening effect in Ti₃AlC₂/10 vol.% Al₂O₃ composite
9. Investigation of Cu-graphite composites prepared by electroforming
10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
11. Effect of reinforcement size hybridization on the wear properties of SiC_p/Cu Composites
12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
15. Determination of retained austenite in multiphase steels by magnetic force microscopy
16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
17. Microstructure of a Damascene sabre after annealing
18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
19. Personal
20. Conferences
21. Contents
22. Editorial
23. Extended editorial with anecdotes
24. Basic
25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
27. Calorimetric investigation of the binary Cu–In system
28. Thermodynamic properties of liquid Cu–In–Zn alloys
29. Comparing the thermodynamic behaviour of Al(l) + ZrO₂(4% Y₂O₃) and Al(l) + Al₂O₃
30. Failure-mode dependence of the strengthening effect in Ti₃AlC₂/10 vol.% Al₂O₃ composite
31. Investigation of Cu-graphite composites prepared by electroforming
32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
33. Applied
34. Effect of reinforcement size hybridization on the wear properties of SiC_p/Cu Composites
35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
38. Determination of retained austenite in multiphase steels by magnetic force microscopy
39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
40. Microstructure of a Damascene sabre after annealing
41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
42. Notifications
43. Personal
44. Conferences