Home Interaction of high-cycle fatigue with high-temperature creep in superalloy single crystals
Article
Licensed
Unlicensed Requires Authentication

Interaction of high-cycle fatigue with high-temperature creep in superalloy single crystals

  • Petr Lukáš EMAIL logo , Ludvík Kunz and Milan Svoboda
Published/Copyright: December 7, 2021
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 93 Issue 7

Abstract

Smooth and notched specimens of superalloy single crystals CMSX-4 with 〈001〉 orientation were subjected to creep and creep/high-cycle-fatigue loading at temperatures of 800 and 850 °C in air. Superposition of a cyclic stress component on the static stress component leads to a slowdown of the creep rate at small creep strains and to the formation of persistent slip bands running through both the γ matrix and the γ ′ precipitates. Consequence of the formation of these zones is fatigue crack initiation at casting pores and shortening of lifetime at higher stress amplitudes.

Keywords: Single crystals CMSX-4; Creep/fatigue interaction; Persistent slip bands

Dedicated to Professor Dr. Haël Mughrabi on the occasion of his 65th birthday

Financial support by the Academy of Sciences of the Czech Republic under the contracts A 2041002 and K 1010104 is gratefully acknowledged.

Assoc. Prof. Dr. P. Lukáš Institute of Physics of Materials, Žižkova 22, 61662 Brno, Czech Republic Tel.: +420 5 4121 2290 Fax: +420 5 4121 2301

References

1 Mughrabi, H., in: R.J. Arsenault, D. Cole, T. Gross, G. Kostorz, P. Liaw, S. Parameswaran, H. Sizek (eds.), Johannes Weertman Symposium, TMS Publication, Warrendale, PA (1996) 267.Search in Google Scholar

2 Mughrabi, H., in: X.R. Wu, Z.G. Wang (eds.), Fatigue ’99, Vol. III, Higher Education Press, Beijing (1999) 1967.Search in Google Scholar

3 Mughrabi, H.; Ackermann, F.; Herz, K., in: J.T. Fong (ed.); ASTM-STP 675, Philadelphia, PA (1979) 69.Search in Google Scholar

4 Gabb, T.P.; Miner, R.V.; Gayda, J: Scripta Metall. 20 (1986) 513.10.1016/0036-9748(86)90245-0Search in Google Scholar

5 Fritzemeier, L.G.; Tien, J.K.: Acta Metall. 36 (1988) 283.10.1016/0001-6160(88)90005-3Search in Google Scholar

6 Chieragatti, R.; Rémy, L.: Mater. Sci. Eng. A 141 (1991) 11.10.1016/0921-5093(91)90703-PSearch in Google Scholar

7 Monier, C.; Bertrand, C.; Dallas, J.P.; Trichet, M.F.; Cornet, M.: Mater. Sci. Eng. A 188 (1994) 133.10.1016/0921-5093(94)90364-6Search in Google Scholar

8 Obrtlík, K.; Lukáš, P.; Polák, J., in: K.T. Rie, P.D. Portella (eds.), Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials, Elsevier, Amsterdam (1998) 33.10.1016/B978-008043326-4/50011-8Search in Google Scholar

9 Glatzel, U.; Feller-Kniepmeier, M.: Scripta Metall. Mater. 25 (1991) 1845.10.1016/0956-716X(91)90315-RSearch in Google Scholar

10 Décamps, B.; Brien, V.; Morton, A.J.: Scripta Metall. Mater. 31 (1994) 793.10.1016/0956-716X(94)90480-4Search in Google Scholar

11 Zhang, J.H.; Hu, Z.Q.; Xu, Y.B.; Wang, Z.G.: Metall. Trans. A 23 (1992) 1253.10.1007/BF02665056Search in Google Scholar

12 Gabb, T.P.; Gayda, J.; Miner, R.V.: Metall. Trans. A 17 (1986) 497.10.1007/BF02643956Search in Google Scholar

13 Lukáš, P.; Preclík, P.;Čadek, J.: Mater. Sci. Eng. A 298 (2001) 84.10.1016/S0921-5093(00)01288-0Search in Google Scholar

14 Pollock, T.M.; Argon, A.S.: Acta Metall. 40 (1992) 1.10.1016/0956-7151(92)90195-KSearch in Google Scholar

15 Sass, V.; Feller-Kniepmeier, M.: Mater. Sci. Eng. A 245 (1998) 19.10.1016/S0921-5093(97)00709-0Search in Google Scholar

16 Lukáš, P.;Čadek, J.;Šustek, V.; Kunz, L.: Mater. Sci. Eng. A 208 (1996) 149.10.1016/0921-5093(95)10052-0Search in Google Scholar
Received: 2002-03-06
Published Online: 2021-12-07
Published in Print: 2021-12-07

© 2002 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. A model for the work hardening of WC–Co “hard metals”
  6. On the dispersion strengthening mechanisms in ODS materials
  7. Effect of hydrogen on the mechanical properties of the β titanium alloy Timetal® 21S
  8. Cyclic deformation behaviour of (α + β) titanium alloys under complex mechanical and physiological loading conditions
  9. Assessment of the influence of interdendritic shrinkage cavities on the thermo-mechanical fatigue behaviour of the nickel-base superalloy MAR-M247LC
  10. Effects of static strain aging on residual stress stability and alternating bending strength of shot peened AISI 4140
  11. On the possibilities to enhance the fatigue properties of ultrafine-grained metals
  12. New method of determining stress relaxation behavior in creep machines by controlled unloading
  13. Creep of binary Ni-rich NiTi shape memory alloys and the influence of pre-creep on martensitic transformations
  14. Interaction of high-cycle fatigue with high-temperature creep in superalloy single crystals
  15. A unified description of creep in pure and dispersion-strengthened copper
  16. A new interpretation of flow-stress measurements of high-purity NiAl below room temperature
  17. A mesoscopic plasticity model accounting for spatial fluctuations of plastic strains, internal stresses and dislocation densities
  18. Behavior of X-ray peak widths in the Wilkens model of a restrictedly random distribution of dislocations
  19. Dislocation structure and crystallite size distribution in hexagonal nanomaterials from X-ray peak profile analysis
  20. Werden gewichtsoptimiert konstruierte Bauteile durch die Verwendung von Leichtmetallen wirklich leichter?*)
  21. Strain-induced martensite formation in metastable austenitic steels with varying carbon content
  22. Isothermal bainitic transformation in low alloy steels: factors limiting prediction of the resulting material’s properties
  23. Fatigue damage evolution in a particulate-reinforced metal matrix composite determined by acoustic emission and compliance method
  24. Microstructure and modification mechanisms of Si phase in as-thixoformed alloy A356
  25. Influence of size effect on microstructural changes in cyclically deformed polycrystalline nickel
  26. Self-diffusion of 71Ge and 31Si in Si –Ge alloys
  27. On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material
  28. The internal stress during growth of SiC single crystals
  29. Notifications/Mitteilungen
  30. Personal/Personelles
  31. Books/Bücher
  32. DGM Conferences/Training
https://doi.org/10.3139/ijmr-2002-0112
Keywords for this article
Single crystals CMSX-4; Creep/fatigue interaction; Persistent slip bands

Articles in the same Issue

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles/Aufsätze
  5. A model for the work hardening of WC–Co “hard metals”
  6. On the dispersion strengthening mechanisms in ODS materials
  7. Effect of hydrogen on the mechanical properties of the β titanium alloy Timetal® 21S
  8. Cyclic deformation behaviour of (α + β) titanium alloys under complex mechanical and physiological loading conditions
  9. Assessment of the influence of interdendritic shrinkage cavities on the thermo-mechanical fatigue behaviour of the nickel-base superalloy MAR-M247LC
  10. Effects of static strain aging on residual stress stability and alternating bending strength of shot peened AISI 4140
  11. On the possibilities to enhance the fatigue properties of ultrafine-grained metals
  12. New method of determining stress relaxation behavior in creep machines by controlled unloading
  13. Creep of binary Ni-rich NiTi shape memory alloys and the influence of pre-creep on martensitic transformations
  14. Interaction of high-cycle fatigue with high-temperature creep in superalloy single crystals
  15. A unified description of creep in pure and dispersion-strengthened copper
  16. A new interpretation of flow-stress measurements of high-purity NiAl below room temperature
  17. A mesoscopic plasticity model accounting for spatial fluctuations of plastic strains, internal stresses and dislocation densities
  18. Behavior of X-ray peak widths in the Wilkens model of a restrictedly random distribution of dislocations
  19. Dislocation structure and crystallite size distribution in hexagonal nanomaterials from X-ray peak profile analysis
  20. Werden gewichtsoptimiert konstruierte Bauteile durch die Verwendung von Leichtmetallen wirklich leichter?*)
  21. Strain-induced martensite formation in metastable austenitic steels with varying carbon content
  22. Isothermal bainitic transformation in low alloy steels: factors limiting prediction of the resulting material’s properties
  23. Fatigue damage evolution in a particulate-reinforced metal matrix composite determined by acoustic emission and compliance method
  24. Microstructure and modification mechanisms of Si phase in as-thixoformed alloy A356
  25. Influence of size effect on microstructural changes in cyclically deformed polycrystalline nickel
  26. Self-diffusion of 71Ge and 31Si in Si –Ge alloys
  27. On localised corrosive attack, stress corrosion cracking and corrosion fatigue effects in a hardmetal cutting-tool material
  28. The internal stress during growth of SiC single crystals
  29. Notifications/Mitteilungen
  30. Personal/Personelles
  31. Books/Bücher
  32. DGM Conferences/Training
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 11.9.2025 from https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2002-0112/html
Scroll to top button