Startseite Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment

  • Wei Zhang , Wei-song Zhao , Dou-xing Li und Man-ling Sui EMAIL logo
Veröffentlicht/Copyright: 12. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 8

Abstract

An electric-current-pulse (ECP) treatment was employed to rapidly heat a dogbone-shaped Ti-6Al-4V sheet. After the treatment, the alloy was modified from a single micrometer-sized structure to a shape-associated combinatorial counterpart. Coexisting with the original equiaxed coarsegrained α-Ti and the intergranular β-Ti, two kinds of novel ultrafine structures, nanometer-sized lamellar twins of β-Ti martensites and refined bimodal structure have been produced in the different parts of the bulk sample. Formation of the novel microstructures during the ECP treatment was systematically investigated. This work demonstrated that the ECP rapid heating treatment is a promising method to tailor the microstructures of the metallic alloys basically by designing the shape-associated distribution of the current density and offer a new possibility for improving the conventional alloys.

Keywords: Titanium alloy; Microstructure; Phase transformation; Rapid heating; ECP
Prof. M. L. Sui Shenyang National Laboratory for Materials Science Institute of Metal Research, Chinese Academy of Sciences Shenyang 110016, China Tel.: +86 24 2397 1843 Fax: +86 24 2389 1320

References

[1] P.S. Ho, T. Kwok: Rep. Prog. Phys. 52 (1989) 301.10.1088/0034-4885/52/3/002Suche in Google Scholar

[2] D.G. Pierce, P.G. Brusius: Microelectron. Reliab. 37 (1997) 1053.10.1016/S0026-2714(96)00268-5Suche in Google Scholar

[3] A.F. Sprecher, S.L. Mannan, H. Conrad: Acta metall. 34 (1986) 1145.10.1016/0001-6160(86)90001-5Suche in Google Scholar

[4] D. Yang, H. Conrad: Intermetallics 9 (2001) 943.10.1016/S0966-9795(01)00094-2Suche in Google Scholar

[5] R.S. Mishra, A.K. Mukherjee: Mater. Sci. Eng. A 287 (2000) 178.10.1016/S0921-5093(00)00772-3Suche in Google Scholar

[6] A.K. Misra: Metall. Trans. A 16 (1985) 1354.10.1007/BF02670340Suche in Google Scholar

[7] J.M. Li, S.L. Li, J. Li, H.T. Liu: Scripta Metall. 31 (1994) 1691.10.1016/0956-716X(94)90465-0Suche in Google Scholar

[8] H. Conrad, Z. Guo, A.F. Sprecher: Scripta metall. 23 (1989) 821.10.1016/0036-9748(89)90252-4Suche in Google Scholar

[9] S.H. Xiao, J.D. Guo, S.D.Wu, G.H. He, S.X. Li: Scripta mater. 46 (2002) 1.10.1016/S1359-6462(01)01186-1Suche in Google Scholar

[10] A. Avramescu: Z. Tech. Physik 20 (1939) 213.Suche in Google Scholar

[11] N.S. Rasor, J.D. Mcclelland: Rev. Sci. Inst. 31 (1960) 595.10.1063/1.1931263Suche in Google Scholar

[12] Y.Z. Zhou, Y. Zeng, G.H. He, B.L. Zhou: J. Mater. Res. 16 (2001) 17.10.1557/JMR.2001.0005Suche in Google Scholar

[13] Y.Z. Zhou, R.S. Qin, S.H. Xiao, G.H. He, B.L. Zhou: J. Mater. Res. 15 (2000) 1056.10.1557/JMR.2000.0152Suche in Google Scholar

[14] W. Zhang, M.L. Sui, K.Y. Hu, D.X. Li, X.N. Guo, G.H. He, B.L. Zhou: J. Mater. Res. 15 (2000) 2065.10.1557/JMR.2000.0295Suche in Google Scholar

[15] W. Zhang, M.L. Sui, Y.Z. Zhou, Y. Zhong, D.X. Li: Adv. Eng. Mater. 4 (2002) 697.10.1002/1527-2648(20020916)4:9<697::AID-ADEM697>3.0.CO;2-ASuche in Google Scholar

[16] W. Zhang, M.L. Sui, Y.Z. Zhou, D.X. Li: Micron 34 (2003) 189.10.1016/S0968-4328(03)00025-8Suche in Google Scholar

[17] H. Conrad: Mater. Sci. Eng. A 287 (2000) vii.10.1016/S0921-5093(00)00764-4Suche in Google Scholar

[18] E.W. Collings: The Physical Metallurgy of Titanium Alloys, ASM, Metals Park, OH (1984) 75–100.Suche in Google Scholar

[19] M. Peters, J. Kumpfert, C.H.Ward, C. Leyens: Adv. Eng. Mater. 5 (2003) 419.10.1002/adem.200310095Suche in Google Scholar

[20] S.L. Semiatin, T.R. Bieler: Acta mater. 49 (2001) 3565.10.1016/S1359-6454(01)00236-1Suche in Google Scholar

[21] Y.Z. Zhou, W. Zhang, B.Q. Wang, G.H. He, J.D. Guo: J. Mater. Res. 17 (2002) 2105.10.1557/JMR.2002.0311Suche in Google Scholar

[22] 44-1294 & 44-1288, JCPDS-International Center for Diffraction Data (1995).Suche in Google Scholar

[23] Metals Handbook, Vol. 7, ASM, Metals Park, OH (1972) 328.Suche in Google Scholar

[24] D.G. Lee, S. Kim, S. Lee, C.S. Lee: Metall. Mater. Trans. A 32 (2001) 315.10.1007/s11661-001-0263-ySuche in Google Scholar

[25] R.K. Nalla, B.L. Boyce, J.P. Campbell, J.O. Peters, R.O. Ritchie: Metall. Mater. Trans. A 33 (2002) 899.10.1007/s11661-002-0160-zSuche in Google Scholar

[26] W.G. Burgers: Physica 1 (1934) 561.10.1016/S0031-8914(34)80244-3Suche in Google Scholar

[27] N. Stefansson, S.L. Semiatin: Metall. Mater. Trans. A 34 (2003) 691.10.1007/s11661-003-0103-3Suche in Google Scholar

[28] T.A. Venkatesh, B.P. Conner, C.S. Lee, A.E. Giannakopoulos, T.C. Lindley, S. Suresh: Metall. Mater. Trans. A 32 (2001) 1131.10.1007/s11661-001-0124-8Suche in Google Scholar

[29] G.M. Pharr, W.C. Oliver: MRS Bulletin 7 (1992) 28.10.1557/S0883769400041634Suche in Google Scholar

[30] D. Tabor: The Hardness of Metals, Clarendon Press, Oxford (1951).Suche in Google Scholar

[31] R. Hill: The Mathematical Theory of Plasticity, Clarendon Press, Oxford (1951).Suche in Google Scholar

[32] H. Modin, S. Modin: Scand. J. Metallurgy 3 (1974) 217.Suche in Google Scholar

[33] F.R.N. Nabarro: Dislocations in Solids, Elservier, Amsterdam, The Netherlands (1989) 499.Suche in Google Scholar

[34] E.A. Brandes, G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Oxford, UK (1998) 14–25, 22–84.Suche in Google Scholar

[35] W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill, New York (1981).Suche in Google Scholar

[36] D.W. Tang, B.L. Zhou, H. Cao, B.L. Zhou: Appl. Phys. Lett. 59 (1991) 3113.10.1063/1.105755Suche in Google Scholar

[37] B.L. Zhou, G.H. He, Y.J. Gao, W.L. Zhao, J.D. Guo: Int. J. Thermophys. 18 (1997) 481.10.1007/BF02575177Suche in Google Scholar

[38] S.H. Xiao, J.D. Guo, S.X. Li: Phil. Mag. Lett. 82 (2002) 617.10.1080/0950083021000030397Suche in Google Scholar

[39] G.H. He, B.Q. Wang, X.N. Guo, F. Yang, J.D. Guo, B.L. Zhou: Mater. Sci. Eng. A 292 (2000) 183.10.1016/S0921-5093(00)01009-1Suche in Google Scholar

[40] Y. Dolinsky, T. Elperin: Phys. Rev. B 50 (1994) 52.10.1103/PhysRevB.50.52Suche in Google Scholar

[41] Y. Dolinsky, T. Elperin: J. Appl. Phys. 73 (1993) 5283.10.1063/1.354048Suche in Google Scholar

[42] Properties and selection: Nonferrous alloys and pure metals, Vol. II, ASM International, Metals Handbook, OH (1979) 1039.Suche in Google Scholar

[43] W. Zhang, W.S. Zhao, D.X. Li, M.L. Sui: Appl. Phys. Lett. 84 (2004) 4872.10.1063/1.1762698Suche in Google Scholar

[44] J. Tu, B. Jiang, T.Y. Hsu, J. Zhong: J. Mater. Sci. 29 (1994) 1662.10.1007/BF00368942Suche in Google Scholar

[45] J. Tsai, C. Yu, D.K. Shetty: J. Am. Ceram. Soc. 73 (1990) 2992.10.1111/j.1151-2916.1990.tb06706.xSuche in Google Scholar

[46] I. Katzarov, S. Malinov,W. Sha: Metall. Mater. Trans. A 33 (2002) 1027.10.1007/s11661-002-0204-4Suche in Google Scholar

[47] National Research Council: COSMAT Summary Report-Materials Science and Engineering for the 1990s, National Academy Press, Washington, DC, 1989.Suche in Google Scholar
Received: 2005-11-07
Accepted: 2006-02-20
Published Online: 2022-01-12

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
https://doi.org/10.3139/ijmr-2006-0180
Schlagwörter für diesen Artikel
Titanium alloy; Microstructure; Phase transformation; Rapid heating; ECP

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 27.9.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2006-0180/html
Button zum nach oben scrollen