Inverse analysis of concrete meso-constitutive model parameters considering aggregate size effect

Articles in the same Issue

1. Effects of Material Constructions on Supersonic Flutter Characteristics for Composite Rectangular Plates Reinforced with Carbon Nano-structures
2. Processing of Hollow Glass Microspheres (HGM) filled Epoxy Syntactic Foam Composites with improved Structural Characteristics
3. Investigation on the anti-penetration performance of the steel/nylon sandwich plate
4. Flexural bearing capacity and failure mechanism of CFRP-aluminum laminate beam with double-channel cross-section
5. In-Plane Permeability Measurement of Biaxial Woven Fabrics by 2D-Radial Flow Method
6. Regular Articles
7. Real time defect detection during composite layup via Tactile Shape Sensing
8. Mechanical and durability properties of GFRP bars exposed to aggressive solution environments
9. Cushioning energy absorption of paper corrugation tubes with regular polygonal cross-section under axial static compression
10. An investigation on the degradation behaviors of Mg wires/PLA composite for bone fixation implants: influence of wire content and load mode
11. Compressive bearing capacity and failure mechanism of CFRP–aluminum laminate column with single-channel cross section
12. Self-Fibers Compacting Concrete Properties Reinforced with Propylene Fibers
13. Study on the fabrication of in-situ TiB₂/Al composite by electroslag melting
14. Characterization and Comparison Research on Composite of Alluvial Clayey Soil Modified with Fine Aggregates of Construction Waste and Fly Ash
15. Axial and lateral stiffness of spherical self-balancing fiber reinforced rubber pipes under internal pressure
16. Influence of technical parameters on the structure of annular axis braided preforms
17. Nano titanium oxide for modifying water physical property and acid-resistance of alluvial soil in Yangtze River estuary
18. Modified Halpin–Tsai equation for predicting interfacial effect in water diffusion process
19. Experimental research on effect of opening configuration and reinforcement method on buckling and strength analyses of spar web made of composite material
20. Photoluminescence characteristics and energy transfer phenomena in Ce³⁺-doped YVO₄ single crystal
21. Influence of fiber type on mechanical properties of lightweight cement-based composites
22. Mechanical and fracture properties of steel fiber-reinforced geopolymer concrete
23. Handcrafted digital light processing apparatus for additively manufacturing oral-prosthesis targeted nano-ceramic resin composites
24. 3D printing path planning algorithm for thin walled and complex devices
25. Material-removing machining wastes as a filler of a polymer concrete (industrial chips as a filler of a polymer concrete)
26. The electrochemical performance and modification mechanism of the corrosion inhibitor on concrete
27. Evaluation of the applicability of different viscoelasticity constitutive models in bamboo scrimber short-term tensile creep property research
28. Experimental and microstructure analysis of the penetration resistance of composite structures
29. Ultrasensitive analysis of SW-BNNT with an extra attached mass
30. Active vibration suppression of wind turbine blades integrated with piezoelectric sensors
31. Delamination properties and in situ damage monitoring of z-pinned carbon fiber/epoxy composites
32. Analysis of the influence of asymmetric geological conditions on stability of high arch dam
33. Measurement and simulation validation of numerical model parameters of fresh concrete
34. Tuning the through-thickness orientation of 1D nanocarbons to enhance the electrical conductivity and ILSS of hierarchical CFRP composites
35. Performance improvements of a short glass fiber-reinforced PA66 composite
36. Investigation on the acoustic properties of structural gradient 316L stainless steel hollow spheres composites
37. Experimental studies on the dynamic viscoelastic properties of basalt fiber-reinforced asphalt mixtures
38. Hot deformation behavior of nano-Al₂O₃-dispersion-strengthened Cu20W composite
39. Synthesize and characterization of conductive nano silver/graphene oxide composites
40. Analysis and optimization of mechanical properties of recycled concrete based on aggregate characteristics
41. Synthesis and characterization of polyurethane–polysiloxane block copolymers modified by α,ω-hydroxyalkyl polysiloxanes with methacrylate side chain
42. Buckling analysis of thin-walled metal liner of cylindrical composite overwrapped pressure vessels with depressions after autofrettage processing
43. Use of polypropylene fibres to increase the resistance of reinforcement to chloride corrosion in concretes
44. Oblique penetration mechanism of hybrid composite laminates
45. Comparative study between dry and wet properties of thermoplastic PA6/PP novel matrix-based carbon fibre composites
46. Experimental study on the low-velocity impact failure mechanism of foam core sandwich panels with shape memory alloy hybrid face-sheets
47. Preparation, optical properties, and thermal stability of polyvinyl butyral composite films containing core (lanthanum hexaboride)–shell (titanium dioxide)-structured nanoparticles
48. Research on the size effect of roughness on rock uniaxial compressive strength and characteristic strength
49. Research on the mechanical model of cord-reinforced air spring with winding formation
50. Experimental study on the influence of mixing time on concrete performance under different mixing modes
51. A continuum damage model for fatigue life prediction of 2.5D woven composites
52. Investigation of the influence of recyclate content on Poisson number of composites
53. A hard-core soft-shell model for vibration condition of fresh concrete based on low water-cement ratio concrete
54. Retraction
55. Thermal and mechanical characteristics of cement nanocomposites
56. Influence of class F fly ash and silica nano-micro powder on water permeability and thermal properties of high performance cementitious composites
57. Effects of fly ash and cement content on rheological, mechanical, and transport properties of high-performance self-compacting concrete
58. Erratum
59. Inverse analysis of concrete meso-constitutive model parameters considering aggregate size effect
60. Special Issue: MDA 2020
61. Comparison of the shear behavior in graphite-epoxy composites evaluated by means of biaxial test and off-axis tension test
62. Photosynthetic textile biocomposites: Using laboratory testing and digital fabrication to develop flexible living building materials
63. Study of gypsum composites with fine solid aggregates at elevated temperatures
64. Optimization for drilling process of metal-composite aeronautical structures
65. Engineering of composite materials made of epoxy resins modified with recycled fine aggregate
66. Evaluation of carbon fiber reinforced polymer – CFRP – machining by applying industrial robots
67. Experimental and analytical study of bio-based epoxy composite materials for strengthening reinforced concrete structures
68. Environmental effects on mode II fracture toughness of unidirectional E-glass/vinyl ester laminated composites
69. Special Issue: NCM4EA
70. Effect and mechanism of different excitation modes on the activities of the recycled brick micropowder