Frontmatter

Articles in the same Issue

1. Frontmatter
2. Original articles
3. Review of the mechanical performance of variable stiffness design fiber-reinforced composites
4. Exact solution for bending analysis of functionally graded micro-plates based on strain gradient theory
5. Synthesis, microstructure, and mechanical properties of in situ TiB₂/Al-4.5Cu composites
6. Microstructure and properties of W-Cu/1Cr18Ni9 steel brazed joint with different Ni-based filler metals
7. Drilling studies on the prepared aluminum metal matrix composite from wet grinder stone dust particles
8. Studies on mechanical properties of thermoplastic composites prepared from flax-polypropylene needle punched nonwovens
9. Design of and with thin-ply non-crimp fabric as building blocks for composites
10. Effect of coir fiber reinforcement on mechanical properties of vulcanized natural rubber composites
11. Investigation and analysis of glass fabric/PVC composite laminates processing parameters
12. Abrasive wear behavior of silane treated nanoalumina filled dental composite under food slurry and distilled water condition
13. Finite element study into the effects of fiber orientations and stacking sequence on drilling induced delamination in CFRP/Al stack
14. Preparation of PAA/WO₃ composite films with enhanced electrochromism via layer-by-layer method
15. Effect of alkali treatment on hair fiber as reinforcement of HDPE composites: mechanical properties and water absorption behavior
16. Integration of nano-Al with one-step synthesis of MoO₃ nanobelts to realize high exothermic nanothermite
17. A time-of-flight revising approach to improve the image quality of Lamb wave tomography for the detection of defects in composite panels
18. The simulation of the warpage rule of the thin-walled part of polypropylene composite based on the coupling effect of mold deformation and injection molding process
19. Novel preparation method and the characterization of polyurethane-acrylate/ nano-SiO₂ emulsions
20. Microwave properties of natural rubber based composites containing carbon black-magnetite hybrid fillers
21. Simulation on impact response of FMLs: effect of fiber stacking sequence, thickness, and incident angle