Startseite Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr

  • I. S. Golovin EMAIL logo , A. Strahl und H. Neuhäuser
Veröffentlicht/Copyright: 12. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 8

Abstract

The anelasticity of binary Fe –Al and ternary Fe –Al –Me (Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr) alloys has been studied by mechanical spectroscopy in the Hz and kHz ranges. Relaxation peaks due to point defects – Snoek effect (S) with carbon interstitial jumps, carbon-vacancy complexes (X peak), Zener effect (Z), dislocations (D), and grain boundaries (GB) – are observed and their changes with addition of the third element are used to corroborate the respective proposed relaxation mechanisms, taking account of the changes of structure and order in the alloys which contain up to 5Co, 25Cr, 25Ge, 5Mn, 0.3Nb, 25Si, 6Ta, 4Ti, and 15Zr (all in at.%), respectively. In addition, some data of ordering temperatures, Curie temperatures, and hardness are provided for several alloys.

Keywords: Fe–Al alloys; Ordering; Mechanical spectroscopy; Internal friction; Anelastic relaxation
Prof. Dr. I. S. Golovin Physics of Metals and Materials Science Department Tula State University Lenin ave. 90, 300600 Tula, Russia Tel.: +7 4872 350 581

References

[1] G. Sauthoff: Intermetallics, VCH, Weinheim 1995.10.1002/9783527615414Suche in Google Scholar

[2] C.G. McKamey, in: N.S. Stoloff, V.K. Sikka (Eds.), Physical Metallurgy and Processing of Intermetallic Compounds, Chapman & Hall, London 1996, p. 351.10.1007/978-1-4613-1215-4_9Suche in Google Scholar

[3] F. Kral, P. Schwander, G. Kostorz: Acta Mater. 45 (1997) 675.10.1016/S1359-6454(96)00181-4Suche in Google Scholar

[4] D.G. Morris: Intermetallics 6 (1998) 753.10.1016/S0966-9795(98)00028-4Suche in Google Scholar

[5] N.S. Stoloff: Mater. Sci. Eng. A 258 (1998) 1.10.1016/S0921-5093(98)00909-5Suche in Google Scholar

[6] G. Gremaud, in: R. Schaller, G. Fantozzi, G. Gremaud (Eds.), Mechanical Spectroscopy Q–1 2001, Trans-Tech Publ, Zürich 2001, p. 178.Suche in Google Scholar

[7] A.B. Lebedev: Sov. Phys. Sol. St. 34 (1992) 1008; A.B. Lebedev, V.I. Ivanov: Mater. Sci. Forum 119–121 (1993) 245.Suche in Google Scholar

[8] I.S. Golovin, H. Neuhäuser, A. Rivière, A. Strahl: Intermetallics 12 (2004) 125.10.1016/j.intermet.2003.10.003Suche in Google Scholar

[9] A. Strahl, S.B. Golovina, I.S. Golovin, H. Neuhäuser: J. All. Comp. 370 (2004) 268.10.1016/j.jallcom.2003.10.066Suche in Google Scholar

[10] D.B. Fischbach: Acta Met. 10 (1962) 319.10.1016/0001-6160(62)90009-3Suche in Google Scholar

[11] I.S. Golovin, S.B. Golovina, A. Strahl, H. Neuhäuser, T.S. Pavlova, S.A. Golovin, R. Schaller: Scr. Mater. 50 (2004) 1187.10.1016/j.scriptamat.2003.12.020Suche in Google Scholar

[12] T.S. Pavlova, T.V. Pozdova, I.S. Golovin, in: Reports of Tula State University, Materials Science, Tula, 2002, n2, p. 95 (in Russian).Suche in Google Scholar

[13] A. Nagy, U. Harms, F. Klose, H. Neuhäuser: Mater. Sci. Eng. A 324 (2002) 72.10.1016/S0921-5093(01)01285-0Suche in Google Scholar

[14] I.S. Golovin, S.B. Golovina, C. Grusewski, H.-R. Sinning, A. Strahl, H. Neuhäuser: Reports Russian Academy of Sciences (RAS), Physics 69, 8 (2005)1173 (in Russian).Suche in Google Scholar

[15] J.C. Shyne, M.J. Sinnott: Trans AIME 218 (1960) 861.Suche in Google Scholar

[16] J.A. Hren: phys. stat. sol. 3 (1963) 1603.10.1002/pssb.19630030907Suche in Google Scholar

[17] I.S. Golovin, O.A. Lambri, A. Strahl, J.A. Cano, C. Siemers: to be submittedSuche in Google Scholar

[18] H.E. Schaefer, B. Damson, M.Weller, E. Arzt, E.P. George: phys. stat. sol. (a) 160 (1997) 531.10.1002/1521-396X(199704)160:2<531::AID-PSSA531>3.0.CO;2-7Suche in Google Scholar

[19] Z.C. Zhou, F.S. Han, Z.Y. Gao: Acta Mater. 52 (2004) 4049.10.1016/j.actamat.2004.05.020Suche in Google Scholar

[20] N.Ya. Rokhmanov: Functional Materials 7 (2000) 235.Suche in Google Scholar

[21] M. Bougenhour, D. Hamana, N.Ya. Rokhmanov, V.M. Andronov: Rev. Métall. (2004) 663.10.1051/metal:2004114Suche in Google Scholar

[22] I.S. Golovin, S.V. Divinski, J.Čížek, I. Procházka, F. Stein: Acta Mater. 53 (2005) 2581.10.1016/j.actamat.2005.02.017Suche in Google Scholar

[23] J. Laakmann, Ch. Hartig, H. Mecking: Z. Metallkd. 94 (2003) 526.10.3139/146.030526Suche in Google Scholar

[24] R.G. Baligidad, Mater. Sci. Eng. A 368 (2004) 131.10.1016/j.msea.2003.10.243Suche in Google Scholar

[25] F. Stein, A. Schneider, G. Frommeyer: Intermetallics 11 (2003) 71.10.1016/S0966-9795(02)00187-5Suche in Google Scholar

[26] A. Glezer, B.V. Molotilov: Ordering and Deformation of Iron Alloys. Moscow, Metallurgia, 1984 (in Russian).Suche in Google Scholar

[27] P.L. Gruzin, V.S. Mkrtchan, U.L. Rodionov, I.P. Selisskij, M.K. Khachatrjan: Fiz. metal. metal. 34 (1972) 316.Suche in Google Scholar

[28] M. Koiwa: Phil. Mag. 24 (1971) 81, 107, 539, 799; 25 (1971) 701.10.1080/14786437108216426Suche in Google Scholar

[29] V.W. Jäniche, J. Braunen, W. Heller: Arch. Eisenhüttenwesen 37 (1966) 719.10.1002/srin.196604573Suche in Google Scholar

[30] K. Tanaka: J. Phys. Soc. Japan 30 (1971) 404.10.1143/JPSJ.30.404Suche in Google Scholar

[31] I.S. Golovin, M.S. Blanter, T.V. Pozdova, K. Tanaka, L.B. Magalas: phys. stat. sol. (a) 168 (1998) 403.10.1002/(SICI)1521-396X(199808)168:2<403::AID-PSSA403>3.0.CO;2-2Suche in Google Scholar

[32] A. Strahl, I.S. Golovin, S.B. Golovina, H. Neuhäuser, H.-R. Sinning: ICIFMS-14 (Kyoto Sept. 2005), Mater. Sci. Eng. A (in press).Suche in Google Scholar

[33] M.S. Blanter, I.S. Golovin, H.-R. Sinning: ICIFMS-14 (Kyoto Sept. 2005) Mater. Sci. Eng. A (in press).Suche in Google Scholar

[34] M.S. Blanter, Yu.A. Pigusov (Eds.): Internal Friction Method in Physical Metallurgy Researches, Metallurgia, Moscow 1991 (in Russian).Suche in Google Scholar

[35] S.A. Golovin, S.I. Arkhangelskij: Problemi Prochnosti 5 (1972) 120 (in Russian).Suche in Google Scholar

[36] K. Bothe, H. Neuhäuser: Scripta Met. 16 (1982) 1053; J. Non-Cryst. Sol. 56 (1983) 279.10.1016/0036-9748(82)90455-0Suche in Google Scholar

[37] U. Harms, L. Kempen, H. Neuhäuser: Rev. Sci. Instr. 70 (1999) 6810.1063/1.1149508Suche in Google Scholar

[38] H.-R. Sinning: J. Phys. Cond. Matter 3 (1991) 2005.10.1088/0953-8984/3/13/004Suche in Google Scholar

[39] C. Wert: J. Appl. Phys. 26 (1955) 640.10.1063/1.1722059Suche in Google Scholar

[40] V.A. Udovenko, I.B. Chudakov, N.A. Polyakova, in: A. Wolfenden, V. Kinra (Eds.),M3D III, Mechanics and Mechanisms of Material Damping, ASTM STP 1304 ASTM, Philadelphia, 1997, p. 204.10.1520/STP11749SSuche in Google Scholar

[41] A. Taylor, R.M. Jones: J. Phys. Chem. Solids 6 (1958) 16.10.1016/0022-3697(58)90213-0Suche in Google Scholar

[42] O. Kubaschewski: Iron-Binary Phase Diagrams. Berlin: Springer-Verlag 1982.Suche in Google Scholar

[43] Phase Diagrams of Binary Iron Alloys. Monograph Series on Alloy Phase Diagrams. ASM International, 1993.Suche in Google Scholar

[44] I.S. Golovin, T.S. Pavlova, Chr. Grusewski, Y. Ivanisenko, D. Gunderov, in: Nanomaterials by Severe Plastic Deformation, Trans. Tech. Publ., Mater. Sci. Forum 503–504 (2005) 745.10.4028/www.scientific.net/MSF.503-504.745Suche in Google Scholar

[45] S.A. Golovin, A.A. Morozyuk, V.S. Ageev, in: Internal Friction in Metals, Semiconductors, Dielectrics and Ferromagnets, Nauka, Moscow 1978, p. 41.Suche in Google Scholar

[46] H.S. Saitoh, N. Yoshinaga, K. Ushioda: Acta Mater. 52 (2004) 1255.10.1016/j.actamat.2003.11.009Suche in Google Scholar

[47] I.G. Ritchie, R. Rawlings: Acta Metall. 15 (1967) 491.10.1016/0001-6160(67)90081-8Suche in Google Scholar

[48] I.S. Golovin: J. Alloys Comp. 310 (2000) 356.10.1016/S0925-8388(00)00969-5Suche in Google Scholar

[49] M. Weller, in: R. Schaller, G. Fantozzi, G. Gremaud (Eds.), Mechanical Spectroscopy Q– 1 2001 with Applications to Materials Science, Trans Tech Publ, Mater. Sci. Forum 366–368 (2001) 95.10.4028/www.scientific.net/MSF.366-368.615Suche in Google Scholar

[50] W. Pascheto, G.P. Johari: Met. Mater. Trans. A 27 (1996) 2461.10.1007/BF02652340Suche in Google Scholar

[51] T.V. Pozdova, I.S. Golovin: Solid State Phenomena 89/90 (2003) 279.10.4028/www.scientific.net/SSP.89.279Suche in Google Scholar

[52] I.S. Golovin, T.V. Pozdova, N.Ya Rokhmanov, D. Mukherji: Met. Mater. Trans. A 34 (2003) 255.10.1007/s11661-003-0327-2Suche in Google Scholar

[53] C. Zener: Elasticity and Anelasticity of Metals, The Univ. of Chicago Press, Chicago 1948.Suche in Google Scholar

[54] A.S. Nowick, B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York 1972.Suche in Google Scholar

[55] I.S. Golovin, A. Rivière: Intermetallics 14 (2005) 570.10.1016/j.intermet.2005.09.010Suche in Google Scholar

[56] I.S. Golovin, A. Rivière: ICIFMS-14 (Kyoto Sept. 2005) Mater. Sci. Eng. A (in press).Suche in Google Scholar

[57] K. Tanaka, K. Sahashi: Trans. Japan. Inst. Met. 3 (1971) 130.10.2320/matertrans1960.12.130Suche in Google Scholar

[58] K. Tanaka: Trans. Japan. Inst. Met. 16 (1975) 199.10.2320/matertrans1960.16.199Suche in Google Scholar

[59] Zhengcun Zhou, Thangyong Gao, Fusheng Han: J. Phys. Cond. Matt. 15 (2003) 6809.10.1088/0953-8984/15/40/017Suche in Google Scholar

[60] M. Salamon, H. Mehrer: Z. Metallkd. 96 (2005) 4.10.3139/146.018071Suche in Google Scholar

[61] A. Gude, H. Mehrer: Phil. Mag. A 76 (1997) 1.10.1080/01418619708209959Suche in Google Scholar

[62] S. Peteline, E.M.T. Njiokep, S. Divinski, H. Mehrer: Def. Diff. Forum 216/217 (2003) 175.10.4028/www.scientific.net/DDF.216-217.175Suche in Google Scholar

[63] F. Stein, G. Sauthoff, M. Palm: Z. Metallkd. 95 (2004) 469.10.3139/146.017985Suche in Google Scholar

[64] R. Ducher, F. Stein, B. Viguier, M. Palm, J. Lacaze: Z. Metallkd. 94 (2003) 396.10.3139/146.030396Suche in Google Scholar

[65] A. Schneider, L. Falat, G. Sauthoff, G. Frommeyer: Intermetallics 11 (2003) 443.10.1016/S0966-9795(03)00018-9Suche in Google Scholar

[66] D.D. Risanti, G. Sauthoff: Intermetallics 12 (2005) 1313.10.1016/j.intermet.2004.12.029Suche in Google Scholar

[67] I.S. Golovin, in: Proc. International Conference on Imperfections Interaction and Anelasticity Phenomena in Solids, Tula, Nov. 13–15, 2001, Tula, 2002, p. 47.Suche in Google Scholar

[68] V. Sima: J. All.Comp. 378 (2004) 44.10.1016/j.jallcom.2003.11.166Suche in Google Scholar

[69] Sun Zuquing, Yang Wangyue, Shen Lizhen, Huang Yuanding, Zhang Baisheng, Yand Jilian: Mater. Sci. Eng. A 258 (1998) 2557.10.1016/S0921-5093(98)00919-8Suche in Google Scholar

[70] I.S. Golovin, M.S. Blanter, R. Schaller: phys. stat. sol. (a) 160 (1997) 49.10.1002/1521-396X(199703)160:1<49::AID-PSSA49>3.0.CO;2-PSuche in Google Scholar

[71] Z.C. Zhou, F.S. Han: phys. stat. sol. (a) 199 (2003) 202.10.1002/pssa.200306653Suche in Google Scholar

[72] O.A. Lambri, J.L. Pérez-Landazábal, J.A. Cano, V. Recarte: Mater. Sci. Eng. A 370 (2004) 459.10.1016/j.msea.2003.06.006Suche in Google Scholar

[73] T.S. Pavlova, I.S. Golovin, H.-R. Sinning, S.A. Golovin, C. Siemers: Intermetallics 14 (2006) (in press).10.1016/j.intermet.2005.12.015Suche in Google Scholar

[74] T.S. Pavlova, I.S. Golovin, in: Reports of Tula State University: Materials Science, vol. 5 (2004) 48.Suche in Google Scholar

[75] G. Athanassiadis, G. Le Gaer, J. Foct, L. Rimlinger: phys. stat. sol. (a) 40 (1977) 425.10.1002/pssa.2210400208Suche in Google Scholar

[76] A. Brinck, C. Engelke, H. Neuhäuser, G. Molenat, H. Rösner, E. Nembach: Mater. Sci. Eng. A 258 (1998) 32.10.1016/S0921-5093(98)00913-7Suche in Google Scholar

[77] A. Brinck, H. Neuhäuser: Mater. Sci. Eng. A 387–389 (2004) 969.10.1016/j.msea.2004.05.041Suche in Google Scholar

[78] M.S. Blanter, I.S. Golovin, H.-R. Sinning: Scripta Mater. 52 (2005) 57.10.1016/j.scriptamat.2004.08.030Suche in Google Scholar

[79] I.S. Golovin, S.B. Golovina: Fiz. Metal. Metal. (Dec. 2006) (in Russian) (in press).Suche in Google Scholar
Received: 2005-10-18
Accepted: 2006-02-13
Published Online: 2022-01-12

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
https://doi.org/10.1515/ijmr-2006-0170
Schlagwörter für diesen Artikel
Fe–Al alloys; Ordering; Mechanical spectroscopy; Internal friction; Anelastic relaxation

Artikel in diesem Heft

  1. Contents
  2. Extended editorial with anecdotes
  3. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  4. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  5. Calorimetric investigation of the binary Cu–In system
  6. Thermodynamic properties of liquid Cu–In–Zn alloys
  7. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  8. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  9. Investigation of Cu-graphite composites prepared by electroforming
  10. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  11. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  12. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  13. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  14. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  15. Determination of retained austenite in multiphase steels by magnetic force microscopy
  16. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  17. Microstructure of a Damascene sabre after annealing
  18. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  19. Personal
  20. Conferences
  21. Contents
  22. Editorial
  23. Extended editorial with anecdotes
  24. Basic
  25. Anelastic relaxation and structure of ternary Fe–Al–Me alloys with Me = Co, Cr, Ge, Mn, Nb, Si, Ta, Ti, Zr
  26. Kinetic study of the β → α + γ transformation reaction in a CuZnAl alloy
  27. Calorimetric investigation of the binary Cu–In system
  28. Thermodynamic properties of liquid Cu–In–Zn alloys
  29. Comparing the thermodynamic behaviour of Al(l) + ZrO2(4% Y2O3) and Al(l) + Al2O3
  30. Failure-mode dependence of the strengthening effect in Ti3AlC2/10 vol.% Al2O3 composite
  31. Investigation of Cu-graphite composites prepared by electroforming
  32. Neutron diffraction analysis of martensite ageing in high-carbon FeCMnSi steel
  33. Applied
  34. Effect of reinforcement size hybridization on the wear properties of SiCp/Cu Composites
  35. Temperature dependence of lattice mismatch and γ′ volume fraction of a fourth-generation monocrystalline nickel-based superalloy
  36. Novel combinatorial microstructures in Ti-6Al-4V alloy achieved by an electric-current-pulse treatment
  37. The Effect of Ti–B and Sr on the mechanical behaviour of the Zinc–Aluminum-based ZA-12 alloy produced by gravity casting
  38. Determination of retained austenite in multiphase steels by magnetic force microscopy
  39. Filtration resistance during pressure filtration tests of liquid aluminium alloys
  40. Microstructure of a Damascene sabre after annealing
  41. Effect of tin added to the zinc bath on the formation and the microstructure of hot-dip galvanized coatings
  42. Notifications
  43. Personal
  44. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 1.10.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0170/html?lang=de
Button zum nach oben scrollen