Volume 31, Issue 1

There is a growing demand for information and computational technology for surgeons help with surgical planning as well as prosthetics design. The two-dimensional images are registered to the three-dimensional (3D) model for high efficiency. To reconstruct the 3D model of knee joint including bone structure and main soft tissue structure, the evaluation and analysis of sports injury and rehabilitation treatment are detailed in this study. Mimics 10.0 was used to reconstruct the bone structure, ligament, and meniscus according to the pulse diffusion-weighted imaging sequence (PDWI) and stir sequences of magnetic resonance imaging (MRI). Excluding congenital malformations and diseases of the skeletal muscle system, MRI scanning was performed on bilateral knee joints. Proton weighted sequence (PDWI sequence) and stir pulse sequence were selected for MRI. The models were imported into Geomagic Studio 11 software for refinement and modification, and 3D registration of bone structure and main soft tissue structure was performed to construct a digital model of knee joint bone structure and accessory cartilage and ligament structure. The 3D knee joint model including bone, meniscus, and collateral ligament was established. Reconstruction and image registration based on mimics and Geomagic Studio can build a 3D model of knee joint with satisfactory morphology, which can meet the requirements of teaching, motion simulation, and biomechanical analysis.

Arithmetic optimization algorithm (AOA) is one of the recently proposed population-based metaheuristic algorithms. The algorithmic design concept of the AOA is based on the distributive behavior of arithmetic operators, namely, multiplication (M), division (D), subtraction (S), and addition (A). Being a new metaheuristic algorithm, the need for a performance evaluation of AOA is significant to the global optimization research community and specifically to nature-inspired metaheuristic enthusiasts. This article aims to evaluate the influence of the algorithm control parameters, namely, population size and the number of iterations, on the performance of the newly proposed AOA. In addition, we also investigated and validated the influence of different initialization schemes available in the literature on the performance of the AOA. Experiments were conducted using different initialization scenarios and the first is where the population size is large and the number of iterations is low. The second scenario is when the number of iterations is high, and the population size is small. Finally, when the population size and the number of iterations are similar. The numerical results from the conducted experiments showed that AOA is sensitive to the population size and requires a large population size for optimal performance. Afterward, we initialized AOA with six initialization schemes, and their performances were tested on the classical functions and the functions defined in the CEC 2020 suite. The results were presented, and their implications were discussed. Our results showed that the performance of AOA could be influenced when the solution is initialized with schemes other than default random numbers. The Beta distribution outperformed the random number distribution in all cases for both the classical and CEC 2020 functions. The performance of uniform distribution, Rayleigh distribution, Latin hypercube sampling, and Sobol low discrepancy sequence are relatively competitive with the Random number. On the basis of our experiments’ results, we recommend that a solution size of 6,000, the number of iterations of 100, and initializing the solutions with Beta distribution will lead to AOA performing optimally for scenarios considered in our experiments.

For product packaging, the visual elements in it can further enhance the appeal of the package to customers. This article briefly introduces visual elements and packaging design and made an example analysis with the gift packaging design of Squirrel Design Studio. In the case study, the packaging design of the studio’s mirror, storage bag, and puzzle was rated by hierarchical analysis and questionnaires, and the packaging design was analyzed based on the rating results. A convolutional neural network (CNN) was also used to evaluate packages in batches. The results showed that the CNN could make a batch evaluation of gift packaging design accurately; the three gift packaging designs were based on the studio’s logo, making the ratings similar; in addition, the packaging design patterns were composed of different geometric shapes to show the studio’s innovative design theme, and the squirrel silhouette and text description were used to strengthen the impression of the studio among customers.

Emotional recognition has arisen as an essential field of study that can expose a variety of valuable inputs. Emotion can be articulated in several means that can be seen, like speech and facial expressions, written text, and gestures. Emotion recognition in a text document is fundamentally a content-based classification issue, including notions from natural language processing (NLP) and deep learning fields. Hence, in this study, deep learning assisted semantic text analysis (DLSTA) has been proposed for human emotion detection using big data. Emotion detection from textual sources can be done utilizing notions of Natural Language Processing. Word embeddings are extensively utilized for several NLP tasks, like machine translation, sentiment analysis, and question answering. NLP techniques improve the performance of learning-based methods by incorporating the semantic and syntactic features of the text. The numerical outcomes demonstrate that the suggested method achieves an expressively superior quality of human emotion detection rate of 97.22% and the classification accuracy rate of 98.02% with different state-of-the-art methods and can be enhanced by other emotional word embeddings.

Recent studies in pedestrian simulation have been able to construct a highly realistic navigation behaviour in many circumstances. However, when replicating the close interactions between pedestrians, the replicated behaviour is often unnatural and lacks human likeness. One of the possible reasons is that the current models often ignore the cognitive factors in the human thinking process. Another reason is that many models try to approach the problem by optimising certain objectives. On the other hand, in real life, humans do not always take the most optimised decisions, particularly when interacting with other people. To improve the navigation behaviour in this circumstance, we proposed a pedestrian interacting model using reinforcement learning. Additionally, a novel cognitive prediction model, inspired by the predictive system of human cognition, is also incorporated. This helps the pedestrian agent in our model to learn to interact and predict the movement in a similar practice as humans. In our experimental results, when compared to other models, the path taken by our model’s agent is not the most optimised in certain aspects like path lengths, time taken and collisions. However, our model is able to demonstrate a more natural and human-like navigation behaviour, particularly in complex interaction settings.

The computer distance teaching system teaches through the network, and there is no entrance threshold. Any student who is willing to study can log in to the network computer distance teaching system for study at any free time. Neural network has a strong self-learning ability and is an important part of artificial intelligence research. Based on this study, a neural network-embedded architecture based on shared memory and bus structure is proposed. By looking for an alternative method of exp function to improve the speed of radial basis function algorithm, and then by analyzing the judgment conditions in the main loop during the algorithm process, these judgment conditions are modified conditionally to reduce the calculation scale, which can double the speed of the algorithm. Finally, this article verifies the function, performance, and interface of the computer distance education system.

In order to improve the efficiency of the English translation, machine translation is gradually and widely used. This study briefly introduces the neural network algorithm for speech recognition. Long short-term memory (LSTM), instead of traditional recurrent neural network (RNN), was used as the encoding algorithm for the encoder, and RNN as the decoding algorithm for the decoder. Then, simulation experiments were carried out on the machine translation algorithm, and it was compared with two other machine translation algorithms. The results showed that the back-propagation (BP) neural network had a lower word error rate and spent less recognition time than artificial recognition in recognizing the speech; the LSTM–RNN algorithm had a lower word error rate than BP–RNN and RNN–RNN algorithms in recognizing the test samples. In the actual speech translation test, as the length of speech increased, the LSTM–RNN algorithm had the least changes in the translation score and word error rate, and it had the highest translation score and the lowest word error rate under the same speech length.

To shorten the travel time and improve comfort, the automatic train driving system is considered to replace manual driving. In this article, an automatic control method of computer application data-processing system based on artificial intelligence is proposed. An automatic train operation (ATO) introduced the structure and function of an autopilot system (train), optimized the train running on the target curve, introduced the basic principle of fuzzy generalized predictive control (PC) algorithm, and combined with the characteristics of ATO system design the speed controller based on optimization algorithm, the target curve to make use of the designed controller to track and simulation validation. The experimental outcomes demonstrate that when the train runs to 90 s, the displacement difference reaches about 40 m, which proves that the fuzzy PC has better displacement tracking, punctual arrival, and higher stopping accuracy.

An intelligent climate and watering agriculture system is presented that is controlled with Android application for smart water consumption considering small and medium ruler agricultural fields. Data privacy and security as a big challenge in current Internet of Things (IoT) applications, as with the increase in number of connecting devices, these devices are now more vulnerable to security threats. An intelligent fuzzy logic and blockchain technology is implemented for timely analysis and securing the network. The proposed design consists of various sensors that collect real-time data from environment and field such as temperature, soil moisture, light intensity, and humidity. The sensed field information is stored in IoT cloud platform, and after the analysis of entries, watering is scheduled by implementing the intelligent fuzzy logic and blockchain. The intelligent fuzzy logic based on different set of rules for making smart decisions to meet the watering requirements of plant and blockchain technology provides necessary security to the IoT-enabled system. The implementation of blockchain technology allows access only to the trusted devices and manages the network. From the experimentation, it is observed that the proposed system is highly scalable and secure. Multiple users at the same time can monitor and interact with the system remotely by using the proposed intelligent agricultural system. The decisions are taken by applying intelligent fuzzy logic based on input variables, and an alert is transmitted about watering requirements of a field to the user. The proposed system is capable of notifying users for turning water motor on and off. The experimental outcomes of the proposed system also reveal that it is an efficient and highly secure application, which is capable of handling the process of watering the plants.

Internet marketing requires a personalized marketing strategy. In this study, the application of data mining in personalized Internet marketing was studied. Based on the mining algorithm, a personalized marketing method was designed. Through the calculation of frequent closed item sets and support counts of positive and negative samples, the interval with a high success rate for marketing was obtained. With performance analysis, it was found that the success rate of the marketing method proposed in this study improved 8% compared with the traditional marketing method and had a better performance under the smaller interval number and smaller minimum success number. After applying the designed method in telecommunication enterprise A, it was found that after adopting the marketing method of this study, the marketing success rate of enterprise A increased from 2.72 to 6.31%, which indicated the effectiveness of the method. The research results of this study verify the role of data mining algorithms in Internet marketing, which is conducive to the further application of mining algorithms in personalized marketing and innovation of business modes.

Using computer programs to correct English grammar can improve the efficiency of English grammar correction, improve the effect of error correction, and reduce the workload of manual error correction. In order to deal with and solve the problem of loss evaluation mismatch in the current mainstream machine translation, this study proposes the application of the deep learning method to propose an algorithm model with high error correction performance. Therefore, the framework of confrontation learning network is introduced to continuously improve the optimization model parameters through the confrontation training of discriminator and generator. At the same time, convolutional neural network is introduced to improve the algorithm training effect, which can make the correction sentences generated by the model generator better in confrontation. In order to verify the performance of the algorithm model, P -value, R -value, F 0.5 -value, and MRR-value were selected for the comprehensive evaluation of the model performance index. The simulation results of the CoNLL-2014 test set and Lang-8 test set show that the proposed algorithm model has significant performance improvement compared with the traditional transformer method and can correct the fluency of sentences. It has good application values.

Combining images with music is a music visualization to deepen the knowledge and understanding of music information. This study briefly introduced the concept of music visualization and used a convolutional neural network and long short-term memory to pair music and images for music visualization. Then, an emotion classification loss function was added to the loss function to make full use of the emotional information in music and images. Finally, simulation experiments were performed. The results showed that the improved deep learning-based music visualization algorithm had the highest matching accuracy when the weight of the emotion classification loss function was 0.2; compared with the traditional keyword matching method and the nonimproved deep learning music visualization algorithm, the improved algorithm matched more suitable images.

Automatic text summarization (ATS) extracts information from a source text and presents it to the user in a condensed form while preserving its primary content. Many text summarization approaches have been investigated in the literature for highly resourced languages. At the same time, ATS is a complicated and challenging task for under-resourced languages like Malayalam. The lack of a standard corpus and enough processing tools are challenges when it comes to language processing. In the absence of a standard corpus, we have developed a dataset consisting of Malayalam news articles. This article proposes an extractive topic modeling-based multi-document text summarization approach for Malayalam news documents. We first cluster the contents based on latent topics identified using the latent Dirichlet allocation topic modeling technique. Then by adopting vector space model, the topic vector and sentence vector of the given document are generated. According to the relevant status value, sentences are ranked between the document’s topic and sentence vectors. The summary obtained is optimized for non-redundancy. Evaluation results on Malayalam news articles show that the summary generated by the proposed method is closer to the human-generated summaries than the existing text summarization methods.

Arrhythmias are irregular heartbeats that may be life-threatening. Proper monitoring and the right care at the right time are necessary to keep the heart healthy. Monitoring electrocardiogram (ECG) patterns on continuous monitoring devices is time-consuming. An intense manual inspection by caregivers is not an option. In addition, such an inspection could result in errors and inter-variability. This article proposes an automated ECG beat classification method based on deep neural networks (DNN) to aid in the detection of cardiac arrhythmias. The data collected by an Internet of Things enabled ECG monitoring device are transferred to a server. They are analysed by a deep learning model, and the results are shared with the primary caregiver. The proposed model is trained using the MIT-BIH ECG arrhythmia database to classify into four classes: normal beat (N), left bundle branch block beat (L), right bundle branch block beat (R), and premature ventricular contraction (V). The received data are sampled with an overlapping sliding window and divided into an 80:20 ratio for training and testing, with tenfold cross-validation. The proposed method achieves higher accuracy with a simple model without any preprocessing when compared with previous works. For the train and test sets, we achieved accuracy rates of 99.09 and 99.03%, respectively. A precision, recall, and F 1 scores of 0.99 is obtained. The proposed model achieves its goal of developing a simple and accurate ECG monitoring system with improved performance. This simple and efficient deep learning approach for heartbeat classification could be applied in real-time telehealth monitoring systems.

Noise will be inevitably mixed with music signals in the recording process. To improve the quality of music signals, it is necessary to reduce noise as much as possible. This article briefly introduces noise, the masking effect, and the spectral subtraction method for reducing noise in reverberant music. The spectral subtraction method was improved by the human ear masking effect to enhance its noise reduction performance. Simulation experiments were carried out on the traditional and improved spectral subtraction methods. The results showed that the improved spectral subtraction method could reduce the noise in reverberant music more effectively; under an objective evaluation criterion, the signal-to-noise ratio, the de-reverberated music signal processed by the improved spectral subtraction method had a higher signal-to-noise ratio; under a subjective evaluation criterion, mean opinion score (MOS), the de-reverberated music signal processed by the improved spectral subtraction method also had a better evaluation.

Because of the lack of interaction between seeking mode cats and tracking mode cats in cat swarm optimization (CSO), its convergence speed and convergence accuracy are affected. An information interaction strategy is designed between seeking mode cats and tracking mode cats to improve the convergence speed of the CSO. To increase the diversity of each cat, a top-N learning strategy is proposed during the tracking process of tracking mode cats to improve the convergence accuracy of the CSO. On ten standard test functions, the average values, standard deviations, and optimal values of the proposed algorithm with different N values are compared with the original CSO algorithm and the adaptive cat swarm algorithm based on dynamic search (ADSCSO). Experimental results show that the global search ability and the convergence speed of the proposed algorithm are significantly improved on all test functions. The proposed two strategies will improve the convergence accuracy and convergence speed of CSO greatly.

The two-wheeled self-balancing robot (TWSBR) is based on the axletree and inverted pendulum. Its balancing problem requires a control action. To speed up the response of the robot and minimize the steady state error, in this article, a grey wolf optimizer (GWO) method is proposed for TWSBR control based on state space feedback control technique. The controller stabilizes the balancing robot and minimizes the overshoot value of the system. The dynamic model of the system is derived based on Euler formula and linearized to state space representation to enhance the control technique. Then, the GWO optimizes the state feedback controller parameters. Simulation results show that the system reaches the zero steady-state error with less than 2 ms, which proves the effectiveness of the proposed controller over the classical state feedback controller in terms of fast response, very small overall error, and minimum overshoot.

With the expansion of people’s needs, the translation performance of traditional models is increasingly unable to meet current demands. This article mainly studied the Transformer model. First, the structure and principle of the Transformer model were briefly introduced. Then, the model was improved by a generative adversarial network (GAN) to improve the translation effect of the model. Finally, experiments were carried out on the linguistic data consortium (LDC) dataset. It was found that the average Bilingual Evaluation Understudy (BLEU) value of the improved Transformer model improved by 0.49, and the average perplexity value reduced by 10.06 compared with the Transformer model, but the computation speed was not greatly affected. The translation results of the two example sentences showed that the translation of the improved Transformer model was closer to the results of human translation. The experimental results verify that the improved Transformer model can improve the translation quality and be further promoted and applied in practice to further improve the English translation and meet application needs in real life.

The parking of cars is a globally recognized problem, especially at locations where there is a high demand for empty parking spaces. Drivers tend to cruise additional distances while searching for empty parking spaces during peak hours leading to problems, such as pollution, congestion, and driver frustration. Providing short-term predictions of parking availability would facilitate the driver in making informed decisions and planning their arrival to be able to choose parking locations with higher availability. Therefore, the aim of this study is to provide short-term predictions of available parking spaces with a low volume of data. The open parking lot provides parking spaces free of charge and one such parking lot, located beside a shopping center, was selected for this study. Parking availability data for 21 days were collected where 19 days were used for training, while multiple periods of the remaining 2 days were used to test and evaluate the prediction methods. The test dataset consists of data from a weekday and a weekend. Based on the reviewed literature, three prediction methods suitable for short-term prediction were selected, namely, long short-term memory (LSTM), seasonal autoregressive integrated moving average with exogenous variables (SARIMAX), and the Ensemble-based method. The LSTM method is a deep learning-based method, while SARIMAX is a regression-based method, and the Ensemble method is based on decision trees and random forest to provide predictions. The performance of the three prediction methods with a low volume of data and the use of visitor trends data as an exogenous variable was evaluated. Based on the test prediction results, the LSTM and Ensemble-based methods provided better short-term predictions at multiple times on a weekday, while the Ensemble-based method provided better predictions over the weekend. However, the use of visitor trend data did not facilitate improving the predictions of SARIMAX and the Ensemble-based method, while it improved the LSTM prediction for the weekend.

Distributed programming paradigms such as MapReduce and Spark have alleviated sequential bottleneck while mining of massive transaction databases. Of significant importance is mining High Utility Itemset (HUI) that incorporates the revenue of the items purchased in a transaction. Although a few algorithms to mine HUIs in the distributed environment exist, workload skew and data transfer overhead due to shuffling operations remain major issues. In the current study, Parallel Utility Computation (PUC) algorithm has been proposed with novel grouping and load balancing strategies for an efficient mining of HUIs in a distributed environment. To group the items, Transaction Weighted Utility (TWU) values as a degree of transaction similarity is employed. Subsequently, these groups are assigned to the nodes across the cluster by taking into account the mining load due to the items in the group. Experimental evaluation on real and synthetic datasets demonstrate that PUC with TWU grouping in conjunction with load balancing converges mining faster. Due to reduced data transfer, and load balancing-based assignment strategy, PUC outperforms different grouping strategies and random assignment of groups across the cluster. Also, PUC is shown to be faster than PHUI-Growth algorithm with a promising speedup.

With the development of communication and computer technology, the application of big data technology has become increasingly widespread. Reasonable, effective, and fast retrieval methods for querying information from massive data have become an important content of current research. This article provides an image retrieval method based on the weighted nearest neighbor label prediction for the problem of automatic image annotation and keyword image retrieval. In order to improve the performance of the test method, scientific experimental verification was implemented. The nearest neighbor weights are determined by maximizing the training image annotation, and experiments are carried out from multiple angles based on the Mahalanobis metric learning integration model. The experimental results show that the proposed tag correlation prediction propagation model has obvious improvements in accuracy, recall rate, break-even point, and overall average accuracy performance compared with other widely used algorithm models.

Gross domestic product (GDP) can well reflect the development of the economy, and predicting GDP can help better grasp the future economic trends. In this article, three different neural network models, the genetic algorithm – back-propagation neural network model, the particle swarm optimization (PSO) – Elman neural network (Elman NN) model, and the bat algorithm – long short-term memory model, were analyzed based on neural networks. The GDP data of Sichuan province from 1992 to 2020 were collected to compare the performance of the three models in predicting GDP. It was found that the mean absolute percentage error values of the three models were 0.0578, 0.0236, and 0.0654, respectively; the root-mean-square error values were 0.0287, 0.0166, and 0.0465, respectively; and the PSO-Elman NN model had the best performance in GDP prediction. The experimental results demonstrate that neural networks were reliable in predicting GDP and can be used for further applications in practice.

In order to improve the translation quality of complex English sentences, this paper investigated unknown words. First, two baseline models, the recurrent neural machine translation (RNMT) model and the transformer model, were briefly introduced. Then, the unknown words were identified and replaced based on WordNet and the semantic environment and input to the neural machine translation (NMT) model for translation. Finally, experiments were conducted on several National Institute of Standards and Technology (NIST) datasets. It was found that the transformer model significantly outperformed the RNMT model, its average bilingual evaluation understudy (BLEU) value was 42.14, which was 6.96 higher than the RNMT model, and its translation error rate (TER) was also smaller. After combining the intelligent algorithm, the BLEU values of both models improved, and the TER became smaller; the average BLEU value of the transformer model combined with the intelligent algorithm was 43.7, and the average TER was 57.68. The experiment verifies that the transformer model combined with the intelligent algorithm is reliable in translating complex sentences and can obtain higher-quality translation results.

Precision agriculture is a breakthrough in digital farming technology, which facilitates the application of precise and exact amount of input level of water and fertilizer to the crop at the required time for increasing the yield. Since agriculture relies on direct rainfall than irrigation and the prediction of rainfall date is easily available from web source, the integration of rainfall prediction with precision agriculture helps to regulate the water consumption in farms. In this work, an edge computing model is developed for predicting soil moisture in real time and managing the water usage in accordance with rain prediction. A soil moisture prediction hybrid algorithm (SMPHA) has been developed that revolves around the decision-making techniques with live environmental parameters including weather parameters for the prediction of soil moisture through the impact of precipitation. Numerous algorithms with the combination of regression + clustering are estimated, and it is inferred that XGBoost + k-means outperforms other algorithmic combinations that is deployed in edge model. This model is used as an intermediary between the end IoT devices and cloud that results in the saving of computationally intensive processing performed on cloud servers. The servers located on a local edge network perform the developed algorithmic computations. Avoiding transmission over the cloud results in significant latency, response time, and computation power savings and therefore increases the efficiency of data transfer. The proposed edge computing model is implemented in Raspberry Pi as an edge, Heroku as cloud, and edge nodes as the combination of Pi with actuators and sensors. The monitored data from Pi are stored in MongoDB webserver that is controlled by Web dashboard. Finally, the developed model is implemented in cloud and edge where the edge server implementation performs better in terms of latency, bandwidth, throughput, response time, and CPU memory usage.

Grammatical error correction (GEC) is an important element in language learning. In this article, based on deep learning, the application of the Transformer model in GEC was briefly introduced. Then, in order to improve the performance of the model on GEC, it was optimized by a generative adversarial network (GAN). Experiments were conducted on two data sets. It was found that the performance of the GAN-combined Transformer model was significantly improved compared to the Transformer model. The F 0.5 value of the optimized model was 53.87 on CoNIL-2014, which was 2.69 larger than the Transformer model; the generalized language evaluation understanding (GLEU) value of the optimized model was 61.77 on JFLEG, which was 8.81 larger than that of the Transformer model. The optimized model also had a favorable correction performance in an actual English essay. The experimental results verify the reliability of the GAN-combined Transformer model on automatic English GEC, suggesting that the model can be further promoted and applied in practice.

Fingerprint recognition is the most widely used identification method at present. However, it still falls short in terms of cross-platform and algorithmic complexity, which exerts a certain effect on the migration of fingerprint data and the development of the system. The conventional image recognition methods require offline standard databases constructed in advance for image access efficiency. The database can provide a pre-processed image via a specific method that probably is compatible merely with the specific recognition algorithm. Then, the specific recognition algorithm starts the process of retrieving these specific pre-proessing images for recognition and inevitably will be blocked from other datasets. The proposed method in this research designed an embedded image processing algorithm based on a Siamese neural network in the recognition method that allows the proposed method to recognize images from any source without constructing a database for image storage in advance. In this research, the proposed method was applied to fingerprint recognition and evaluation of the proposed method was evaluated. The results showed that the accuracy of the proposed algorithm was up to 92%, and its F 1 score was up to 0.87. Compared with the conventional fingerprint matching methods, its significant advantage in the FRR, FAR, and CR jointly indicated the remarkable correct recognition rate of the proposed method.

Speech recognition plays an important role in human–computer interaction. The higher the accuracy and efficiency of speech recognition are, the larger the improvement of human–computer interaction performance. This article briefly introduced the hidden Markov model (HMM)-based English speech recognition algorithm and combined it with a back-propagation neural network (BPNN) to further improve the recognition accuracy and reduce the recognition time of English speech. Then, the BPNN-combined HMM algorithm was simulated and compared with the HMM algorithm and the BPNN algorithm. The results showed that increasing the number of test samples increased the word error rate and recognition time of the three speech recognition algorithms, among which the word error rate and recognition time of the BPNN-combined HMM algorithm were the lowest. In conclusion, the BPNN-combined HMM can effectively recognize English speeches, which provides a valid reference for intelligent recognition of English speeches by computers.

Crimes are increasing in our society as a serious worldwide issue. Fast reporting of crimes is a significantly important area in anticrime. This problem is visible in Iraq as people avoid information-sharing due to the lack of trust in the security system despite some contact lines between citizens and police in Iraq. Furthermore, there has been a little empirical study in this field. We proposed a multi-approach for crime reporting and police control to address these issues. First, this study has two goals: (1) investigating the adopted method in reporting crimes to police sectors to identify the gap and, (2) developing a mobile application for crime reporting and keeping it undisclosed and exclusive for crime witnesses to report. The approach utilised 200 participants to develop the proposed app. Results have shown that the proposed system can quickly monitor and track criminals based on a cloud-based online database. In addition, the application user will specify certain details to be sent, such as location, case type and time. Other information will be sent directly by the system following the designed algorithm.

Image denoising is one of the important problems in the research field of computer vision, artificial intelligence, 3D vision, and image processing, where the fundamental aim is to recover the original image features from a noisy contaminated image. The camera sensor additive noise present in the holographic recording process reduces the quality of the retrieved image. Even though various techniques have been developed to minimize the noise in digital holography, the noise reduction still remains a challenging task. This article presents a compressive sensing (CS) technique to minimize the additive noise in the digital holographic reconstruction process. We demonstrate the reduction of additive noise using complex wave retrieval method as a sensing matrix in the CS model. The proposed CS method to suppress the noise during the reconstruction process is illustrated using numerical simulations. Only 50% of the pixel measurements are considered in the noisy hologram, which is far less than the original complex object pixels. The impact of additive gaussian noise in the recording plane on the reconstruction accuracy of both intensity and phase distribution is analysed. The CS method denoises and estimates the complex object information accurately. The numerical simulation results have shown that the proposed CS method has effectively minimized the noise in the reconstructed image and has greatly improved the quality of both intensity and phase information.

Multi-person pose estimation is a challenging problem. Bottom-up methods have been greatly studied because the prediction speed of top-down methods is related to the number of people in the input image, making these methods difficult to apply in real-time environments. To solve the problems of scale sensitivity and quantization error in bottom-up methods, it is necessary to have a model that can predict multi-scale keypoints and refine quantization error. To achieve this, we propose context feature and refined network for multi-person pose estimation (CRNet), which can effectively solve the problems of scale sensitivity and quantization error in bottom-up methods. We use a multi-scale feature pyramid and context feature to achieve scale invariance of the network. We extract global and local features and then fuse them by attentional feature fusion (AFF) to obtain context feature that adapt to multi-scale keypoints. In addition, we propose an efficient refined network to solve the problem of quantization error and use multi-resolution supervised learning to further improve the prediction accuracy of CRNet. Comprehensive experiments are conducted on two benchmarks: COCO and MPII datasets. The average precision of CRNet reached 72.1 and 80.2%, respectively, surpassing most state-of-the-art methods.

Policy Interaction Graph Analysis is a Host-based Intrusion Detection tool that uses Linux MAC Mandatory access control policy to build the licit information flow graph and uses a detection policy defined by the administrator to extract illicit behaviour from the graph. The main limitation of this tool is the generation of a huge signature base of illicit behaviours; hence, this leads to the use of huge memory space to store it. Our primary goal in this article is to reduce this memory space while keeping the tool’s efficiency in terms of intrusion detection rate and false generated alarms. First, the interactions between the two nodes of the graph were grouped into a single interaction. The notion of equivalence class was used to classify the paths in the graph and was compressed by using a genetic algorithm. Such an approach showed its efficiency compared to the approach proposed by Pierre Clairet, by which the detection rate obtained was 99.9%, and no false-positive with a compression rate of illicit behaviour signature database reached 99.44%. Having these results is one of the critical aspects of realizing successful host-based intrusion detection systems.

With the development of technology, news media and film and television media are spreading faster and faster, and at the same time, the spread of rumors is also accelerated. This article briefly describes the application of artificial intelligence in news media and film and television media using a back-propagation neural network (BPNN) algorithm to reform refutation of rumors in news media and film and television media, and compared it with K-means and support vector machine algorithms in simulation experiments. The results showed that the BPNN-based rumor recognition model had better recognition performance and shorter recognition time; it was more accurate in recognizing Weibo texts that were complete and faster in recognizing bullet screen comments that were short; the BPNN-based rumor recognition model also had the lowest false detection cost and performed stably when being used in actual Weibo platform and bullet screen video website.

The increase in the size of universities has greatly increased the number of teachers, students, and courses and has also increased the difficulty of scheduling courses. This study used coevolution to improve the genetic algorithm and applied it to solve the course scheduling problem in universities. Finally, simulation experiments were conducted on the traditional and improved genetic algorithms in MATLAB software. The results showed that the improved genetic algorithm converged faster and produced better solutions than the traditional genetic algorithm under the same crossover and mutation probability. As the mutation probability in the algorithm increased, the fitness values of both genetic algorithms gradually decreased, and the computation time increased. With the increase in crossover probability in the algorithm, the fitness value of the two genetic algorithms increased first and then decreased, and the computational time decreased first and then increased.

Recommender system (RS) depends on the thoughts of numerous users to predict the favourites of potential consumers. RS is vulnerable to malicious information. Unsuitable products can be offered to the user by injecting a few unscrupulous “shilling” profiles like push and nuke attacks into the RS. Injection of these attacks results in the wrong recommendation for a product. The aim of this research is to develop a framework that can be widely utilized to make excellent recommendations for sales growth. This study uses the methodology that presents an enhanced clustering algorithm named as modified density peak clustering algorithm on the consumer review dataset to ensure a well-formed cluster. An improved recurrent neural network algorithm is proposed to detect these attacks in hybrid RS, which uses the content-based RS and collaborative filtering RS. The results are compared with other state of the art algorithms. The proposed method is more suitable for E-commerce applications where the number of customers and products grows rapidly.

The inversion of directions is an important operation with directions which plays an important role in qualitative spatial reasoning and spatial queries. In this work, we address on the inversion operation of the basic cardinal direction relations in the model of Goyal. The direction relation matrix model proposed by Goyal is a projection-based model for spatial direction relations between regions. This model is simple in calculation and easy to carry out formal reasoning, which is considered as currently one of the most excellent models for representation and qualitative reasoning with cardinal direction relations in two-dimensional space. This work aims to realize the automatic inference and calculation of the inverse of the basic cardinal direction relations in the model of Goyal and further to improve the ability of spatial reasoning and spatial analysis of spatial database. In order to avoid the complicated manual reasoning, an algorithm for automatically performing the inverse operation on this model is devised by means of the operations of direction relation matrix. Theorems are provided to prove formally that our algorithm is correct and complete, which is also verified by comparing the result of our algorithm with that of manual reasoning for each basic cardinal direction relation. This study realized the automatic inference and calculation of the inverse of the basic cardinal direction relations in the model of Goyal and further improved the ability of spatial reasoning and spatial analysis of spatial database.

Systems with human-centered artificial intelligence are always as good as their ability to consider their users’ context when making decisions. Research on identifying people’s everyday activities has evolved rapidly, but little attention has been paid to recognizing both the activities themselves and the motions they make during those tasks. Automated monitoring, human-to-computer interaction, and sports analysis all benefit from Web 4.0. Every sport has gotten its move, and every move is not known to everyone. In ice hockey, every move cannot be monitored by the referee. Here, Convolution Neural Network-based Real-Time Image Processing Framework (CNN-RTIPF) is introduced to classify every move in Ice Hockey. CNN-RTIPF can reduce the challenges in monitoring the player’s move individually. The image of every move is captured and compared with the trained data in CNN. These real-time captured images are processed using a human-centered artificial intelligence system. They compared images predicted by probability calculation of the trained set of images for effective classification. Simulation analysis shows that the proposed CNN-RTIPF can classify real-time images with improved classification ratio, sensitivity, and error rate. The proposed CNN-RTIPF has been validated based on the optimization parameter for reliability. To improve the algorithm for movement identification and train the system for many other everyday activities, human-centered artificial intelligence-based Web 4.0 will continue to develop.

Internet of thing (IoT) building sensors can capture several types of building operations, performances, and conditions and send them to a central dashboard to analyze data to support decision-making. Traditionally, laptops and cell phones are the majority of Internet-connected devices. IoT tracking allows customers to close the distance between devices and enterprises by collecting and analyzing various IoT data through connected devices, customers, and applications on the network. There is a lack of requirements for IoT edge applications security and approval. There are no best practices regarding operations focused on IoT incidents. IoT elements are not covered by audit and logging requirements. In this article, a big data analytics-based customer operation (BDA-CO) system analyzes the operation. With the exponential rise in data usage, the explosive development in the IoT devices reflects the ideal overlap of big data growth with IoT. Big data analytics continuously evolving network raises trivial questions about the performance, distribution of data, analysis, and protection of data collection. IoT modifies almost all the construction industry characteristics. Human-centered artificial intelligence is described as systems that always improve because of human input while also delivering an effective experience between the human and the robotic. The IoT is the key factor that ensures greater building performance. It was the first evolution of technology in a long time to turn genuine inventions into an industry that depended heavily on paper and manual processes. The benefits of the IoT in construction are now quite obviously much heavier than those of current manual processes. As a result, more construction companies explore and incorporate IoT strategies to address their productivity challenges, increasing efficiencies and profits. The simulation analysis shows that the proposed BDA-CO model enhances the trust score of 98.5%, accuracy detection ratio of 93.4%, probability ratio of 97.6%, and security ratio of 98.7% and reduces the false negative ratio of 21.3%, response time of 10.5%, delay rate of 19.9%, and packet loss ratio of 15.4% when compared to other existing techniques.

An improved variant of the Jaya optimization algorithm, called Jaya2, is proposed to enhance the performance of the original Jaya sacrificing its algorithmic design. The proposed approach arranges the solutions in a ring topology to reduce the likelihood of premature convergence. In addition, the population size reduction is used to automatically adjust the population size during the optimization process. Moreover, the translation dependency problem of the original Jaya is discussed, and an alternative solution update operation is proposed. To test Jaya2, we compare it with nine different optimization methods on the CEC 2020 benchmark functions and the CEC 2011 real-world optimization problems. The results show that Jaya2 is highly competitive on the tested problems where it generally outperforms most approaches. Having an easy-to-implement approach with little parameter tuning is highly desirable since researchers from different disciplines with basic programming skills can use it to solve their optimization problems.

Speech is a primary means of human communication and one of the most basic features of human conduct. Voice is an important part of its subsystems. A speech disorder is a condition that affects the ability of a person to speak normally, which occasionally results in voice impairment with psychological and emotional consequences. Early detection of voice problems is a crucial factor. Computer-based procedures are less costly and easier to administer for such purposes than traditional methods. This study highlights the following issues: recent studies, methods of voice pathology detection, machine learning and deep learning (DL) methods used in data classification, main datasets utilized, and the role of Internet of things (IoT) systems employed in voice pathology diagnosis. Moreover, this study presents different applications, open challenges, and recommendations for future directions of IoT systems and artificial intelligence (AI) approaches in the voice pathology diagnosis. Finally, this study highlights some limitations of voice pathology datasets in comparison with the role of IoT in the healthcare sector, which shows the urgent need to provide efficient approaches and easy and ideal medical diagnostic procedures and treatments of disease identification for doctors and patients. This review covered voice pathology taxonomy, detection techniques, open challenges, limitations, and recommendations for future directions to provide a clear background for doctors and patients. Standard databases, including the Massachusetts Eye and Ear Infirmary, Saarbruecken Voice Database, and the Arabic Voice Pathology Database, were used in most articles reviewed in this article. The classes, features, and main purpose for voice pathology identification are also highlighted. This study focuses on the extraction of voice pathology features, especially speech analysis, extends feature vectors comprising static and dynamic features, and converts these extended feature vectors into solid vectors before passing them to the recognizer.

Deep learning techniques, which use a massive technology known as convolutional neural networks, have shown excellent results in a variety of areas, including image processing and interpretation. However, as the depth of these networks grows, so does the demand for a large amount of labeled data required to train these networks. In particular, the medical field suffers from a lack of images because the procedure for obtaining labeled medical images in the healthcare field is difficult, expensive, and requires specialized expertise to add labels to images. Moreover, the process may be prone to errors and time-consuming. Current research has revealed transfer learning as a viable solution to this problem. Transfer learning allows us to transfer knowledge gained from a previous process to improve and tackle a new problem. This study aims to conduct a comprehensive survey of recent studies that dealt with solving this problem and the most important metrics used to evaluate these methods. In addition, this study identifies problems in transfer learning techniques and highlights the problems of the medical dataset and potential problems that can be addressed in future research. According to our review, many researchers use pre-trained models on the Imagenet dataset (VGG16, ResNet, Inception v3) in many applications such as skin cancer, breast cancer, and diabetic retinopathy classification tasks. These techniques require further investigation of these models, due to training them on natural, non-medical images. In addition, many researchers use data augmentation techniques to expand their dataset and avoid overfitting. However, not enough studies have shown the effect of performance with or without data augmentation. Accuracy, recall, precision, F 1 score, receiver operator characteristic curve, and area under the curve (AUC) were the most widely used measures in these studies. Furthermore, we identified problems in the datasets for melanoma and breast cancer and suggested corresponding solutions.

Floods are one of the most common natural disasters in the world that affect all aspects of life, including human beings, agriculture, industry, and education. Research for developing models of flood predictions has been ongoing for the past few years. These models are proposed and built-in proportion for risk reduction, policy proposition, loss of human lives, and property damages associated with floods. However, flood status prediction is a complex process and demands extensive analyses on the factors leading to the occurrence of flooding. Consequently, this research proposes an Internet of Things-based flood status prediction (IoT-FSP) model that is used to facilitate the prediction of the rivers flood situation. The IoT-FSP model applies the Internet of Things architecture to facilitate the flood data acquisition process and three machine learning (ML) algorithms, which are Decision Tree (DT), Decision Jungle, and Random Forest, for the flood prediction process. The IoT-FSP model is implemented in MATLAB and Simulink as development platforms. The results show that the IoT-FSP model successfully performs the data acquisition and prediction tasks and achieves an average accuracy of 85.72% for the three-fold cross-validation results. The research finding shows that the DT scores the highest accuracy of 93.22%, precision of 92.85, and recall of 92.81 among the three ML algorithms. The ability of the ML algorithm to handle multivariate outputs of 13 different flood textual statuses provides the means of manifesting explainable artificial intelligence and enables the IoT-FSP model to act as an early warning and flood monitoring system.

Using optical add–drop multiplexer/remover multiplexer (OADM), it is possible to add or remove wavelengths and change or route them through the various nodes and networks. At this moment, key problems in add–drop multiplexer (ADM) are the bandwidth, modulation format, and reuse wavelength. In this article, the Optisystem software simulation is used as a platform to design, test, and verify the method applied to the current work; the OADM is proposed based on the metro network to get distribution between nodes over a transmission link; OADM analysis was presented with four channels (193.1, 193.2, 193.3, and 193.4 THz) at total bandwidth of 1.6 Tb/s, none-return-to-zero (NRZ), and return to zero coding types. Experiment one shows that the average output power is −17.997 dBm, the average drop power is −17.997 dBm, and the average add power is −18.338 dBm, the average gain is −0.0429 dB, the average noise figure is 0 dB, the average power input signal is 10.679 dBm, the average of power output signal is 10.633 dBm, and the average output optical signal-to-noise ratio (OSNR) is 0 dB, However, the second experiment shows that the average output power is −24.238 dBm, the average drop power is −24.288 dBm, and the average add power is −24.753 dBm, the average gain is −0.0417 dB, the average noise figure is 0 dB, average power input signal is 7.691 dBm, average of power output signal is 7.677 dBm, and the average output OSNR 0 dB. The system supports four input channels, four add channels, four output channels, and four drop channels. The results are acceptable after three spans of Solitons fiber with 600 km length, 200 km for each span. Nonetheless, it is believed that it is well justified to adopt these schemes in the current optical network with a low cost for overall expenditure.

Radiography images are widely utilized in the health sector to recognize the patient health condition. The noise and irrelevant region information minimize the entire disease detection accuracy and computation complexity. Therefore, in this study, statistical Kolmogorov–Smirnov test has been integrated with wavelet transform to overcome the de-noising issues. Then the cat swarm-optimized deep belief network is applied to extract the features from the affected region. The optimized deep learning model reduces the feature training cost and time and improves the overall disease detection accuracy. The network learning process is enhanced according to the AdaDelta learning process, which replaces the learning parameter with a delta value. This process minimizes the error rate while recognizing the disease. The efficiency of the system evaluated using image retrieval in medical application dataset. This process helps to determine the various diseases such as breast, lung, and pediatric studies.

Blockchain is one of the technologies that can support digital transformation in industries in many aspects. This sophisticated technology can provide a decentralized, transparent, and secure environment for organizations and businesses. This review article discusses the adoption of blockchain in the ports and shipping industry to support digital transformation. It also explores the integration of this technology into the current ports and shipping ecosystem. Besides, the study highlighted the situation of the supply chains management in ports and shipping domain as a case study in this field. The investigated studies show that blockchain can be integrated into processes such as financial and document workflow. This review contributes to research by focusing on the adoption of blockchain in the ports and shipping industry to support digital transformation. It also aims to understand the existing port practice and map it with current tendencies based on blockchain. This study gives insight analysis to incorporate blockchain technology into ports and shipping processes globally.

Internet-of-Things (IoT) creates a significant impact in spectrum sensing, information retrieval, medical analysis, traffic management, etc. These applications require continuous information to perform a specific task. At the time, various intermediate attacks such as jamming, priority violation attacks, and spectrum poisoning attacks affect communication because of the open nature of wireless communication. These attacks create security and privacy issues while making data communication. Therefore, a new method autoencoder deep neural network (AENN) is developed by considering exploratory, evasion, causative, and priority violation attack. The created method classifies the transmission outcomes used to predict the transmission state, whether it is jam data transmission or sensing data. After that, the sensing data is applied for network training that predicts the intermediate attacks. In addition to this, the channel access algorithm is used to validate the channel for every access that minimizes unauthorized access. After validating the channel according to the neural network, data have been transmitted over the network. The defined process is implemented, and the system minimizes different attacks on various levels of energy consumption. The effectiveness of the system is implemented using TensorFlow, and the system ensures the 99.02% of detection rate when compared with other techniques.

Timetabling problems are specific types of scheduling problems that deal with assigning certain events to the timeslots. This assigning is subject to certain hard constraints that should be achieved to get a feasible timetable and soft constraints that must meet as many as possible during forming a feasible schedule. This paper introduces an adaptive tabu search. Eleven benchmark datasets of the year 2002 are applied to show the effectiveness of the introduced algorithm. These datasets consist of 5-small, 5-medium, and 1-large dataset. As compared to other methods from previous works, the proposed algorithm produces excellent timetables, in comparison with the algorithms as well as the current results, the mathematical results showed the high effectiveness of the suggested algorithm. It has a minor deficit on the medium or the small problem adaptive Tabu, and the tabu search relies on the tabu list and penalty cost when the change in the penalty cost is checked; if it is still unchanged for the period of iterations (1,000 iterations), the tabu list reduces automatically by (−2); furthermore, the tabu list remains constant.

Modern optimisation is increasingly relying on meta-heuristic methods. This study presents a new meta-heuristic optimisation algorithm called Eurasian oystercatcher optimiser (EOO). The EOO algorithm mimics food behaviour of Eurasian oystercatcher (EO) in searching for mussels. In EOO, each bird (solution) in the population acts as a search agent. The EO changes the candidate mussel according to the best solutions to finally eat the best mussel (optimal result). A balance must be achieved among the size, calories, and energy of mussels. The proposed algorithm is benchmarked on 58 test functions of three phases (unimodal, multimodal, and fixed-diminution multimodal) and compared with several important algorithms as follows: particle swarm optimiser, grey wolf optimiser, biogeography based optimisation, gravitational search algorithm, and artificial bee colony. Finally, the results of the test functions prove that the proposed algorithm is able to provide very competitive results in terms of improved exploration and exploitation balances and local optima avoidance.

This study is planned with the aim of constructing models that can be used to forecast trip production in the Al-Karada region in Baghdad city incorporating the socioeconomic features, through the use of various statistical approaches to the modeling of trip generation, such as artificial neural network (ANN) and multiple linear regression (MLR). The research region was split into 11 zones to accomplish the study aim. Forms were issued based on the needed sample size of 1,170. Only 1,050 forms with responses were received, giving a response rate of 89.74% for the research region. The collected data were processed using the ANN technique in MATLAB v20. The same database was utilized to develop the model of multiple linear regression (MLR) with the stepwise regression technique in the SPSS v25 software. The results indicate that the model of trip generation is related to family size and composition, gender, students’ number in the family, workers’ number in the family, and car ownership. The ANN prediction model is more accurate than the MLR predicted model: the average accuracy (AA) was 83.72% in the ANN model but only 72.46% in the MLR model.

Segmentation of the medical image plays a significant role when it comes to diagnosis using computer aided system. This article focuses on the human corneal endothelium’s health, which is one of the filed research interests, especially in the human cornea. Various pathological environments fasten the extermination of the endothelial cells, which in turn decreases the cell density in an abnormal manner. Dead cells worsen the hexagonal design. The mutilated endothelial cells can no longer revive back and that gives room for neighbouring cells to migrate and expand so that they can fill in the space. The latter results in cell elongation that is unpredictable as well as increase in size and thinning. Cell density and shape are therefore considered major parameters when it comes to explaining the health condition attributed to corneal endothelium. In this study, medical feature extraction was obtained depending on the segmentation of the endothelial cell boundary, and the task of segmentation of such objects especially the thin, transparent, and unclear cell boundary is considered challenging due to the nature of the image capture during endothelium layer examination by ophthalmologists using confocal or specular microscopy. The resulting image suffers from various issues that affect the quality of the image. Low quality is due to non-uniformity of illumination and the presence of a lot of noise and artefacts resulting from high amounts of distortion, and most of these limitations are present because of the nature of the imaging modality. Usually, images contain certain kind of noise and also continuous shadow. Furthermore, the cells are separated by poor border, thereby leading to great difficulty in the segmentation of the images. The irregular shape of cell and also the contrast of such images seem to be low as they possess blurry boundaries with diverse objects existing in addition to the lack of homogeneity. The main aim of the study is to propose and develop a totally automatic, robust, and real-time model for the segmentation of endothelial cells of the human cornea obtained by in vivo microscopy and computation of different clinical features of endothelial cells. To achieve the aim of this study a new scheme of image enhancement was proposed such as the Contrast-Limited Adaptive Histogram Equalisation (CLAHE) technique to enhance contrast. After that, a new image denoising technique called Wavelet Transform Filter and Butterworth Bandpass for Segmentation is used. Subsequently, brightness level correction is applied by using the moving average filter and the CLAHE to reduce the effects of the non-uniform image lighting produced as a result of the previous step. The main aim of this article is the segmentation of endothelial cells, which involves precise detection of the endothelial contours. So a new segmentation model was proposed such that the shape of the cells will be extracted, and the contours were highlighted. This stage is followed by clinical feature extraction and uses the features for diagnosis. In this stage, several relevant clinical features such as pleomorphism mean cell perimeter, mean cell density, mean cell area, and polymegathism are extracted. The role of these clinical features is crucial for the early detection of corneal pathologies as well as the evaluation of the health of the corneal endothelium layer. The findings of this study were promising.

Data hiding and watermarking are considered one of the most important topics in cyber security. This article proposes an optimized method for embedding a watermark image in a cover medium (color image). First, the color of the image is separated into three components (RGB). Consequently, the discrete wavelet transform is applied to each component to obtain four bands (high–high, high–low, low–high, and low–low), resulting in 12 bands in total. By omitting the low–low band from each component, a new square matrix is formed from the rest bands to be used for the hiding process after adding keys to it. These keys are generated using a hybrid approach, combining two chaotic functions, namely Gaussian and exponential maps. The embedding matrix is divided into square blocks with a specific length, each of which is converted using Hessenberg transform into two matrices, P and H . For each block, a certain location within the H -matrix is used for embedding a secret value; the updated blocks are assembled, and the reverse process is performed. An optimization method is applied, through the application of the firework algorithm, on the set of the initial values that generate keys. Using an optimization procedure to obtain keys requires performing lowest possible change rate in an image and maintain the quality of the image. To analyze and test the efficiency of the proposed method, mean-square error (MSE) and peak signal-to-noise ratio (PSNR) measurements are calculated. Furthermore, the robustness of the watermark is computed by applying several attacks. The experimental results show that the value of the MSE is reduced by about 0.01 while the value of the PSNR is increased by about 1.25 on average. Moreover, the proposed method achieved a high-retrieval rate in comparison with the non-optimization approach.

Clark1880, WGS1984, and ITRF08 are the reference systems used in Iraq. The ITRF08 and WGS84 represent the global reference frames. In the majority of instances, the transformation from one coordinate system to another is required. The ability of the artificial neural network (ANN) to identify the connection between two coordinate systems without the need for a mathematical model is one of its most significant benefits. In this study, an ANN was employed for two-dimensional coordinate transformation from local Clark1880 to the global reference system ITRF08. To accomplish so, 68 stations with known coordinates in both systems were utilized in this research and were split into two groups: the first set of data (38 stations) was used as the training data and the second set of data (38 stations) was used as the validation data. A root-mean-square error (RMSE) was used to examine the performance of each transformation. The results showed that the RMSE using the ANN was 0.08 m in the east and 0.17 m in the north. The results indicated that the ANN can be used for 2D coordinate transformation with the results that are better than those of the authorized techniques such as 2D conformal transformation and 2D conformal least square.

Over the previous three decades, the area of computer networks has progressed significantly, from traditional static networks to dynamically designed architecture. The primary purpose of software-defined networking (SDN) is to create an open, programmable network. Conventional network devices, such as routers and switches, may make routing decisions and forward packets; however, SDN divides these components into the Data plane and the Control plane by splitting distinct features away. As a result, switches can only forward packets and cannot make routing decisions; the controller makes routing decisions. OpenFlow is the communication interface between the switches and the controller. It is a protocol that allows the controller to identify the network packet’s path across the switches. This project uses the SDN environment to implement the firefly optimization algorithm to determine the shortest path between two nodes in a network. The firefly optimization algorithm was implemented using Ryu control. The results reveal that using the firefly optimization algorithm improves the selected short path between the source and destination.

Nowadays, lung cancer is one of the most dangerous diseases that require early diagnosis. Artificial intelligence has played an essential role in the medical field in general and in analyzing medical images and diagnosing diseases in particular, as it can reduce human errors that can occur with the medical expert when analyzing medical image. In this research study, we have done a systematic survey of the research published during the last 5 years in the diagnosis of lung cancer classification of lung nodules in 4 reliable databases (Science Direct, Scopus, web of science, and IEEE), and we selected 50 research paper using systematic literature review. The goal of this review work is to provide a concise overview of recent advancements in lung cancer diagnosis issues by machine learning and deep learning algorithms. This article summarizes the present state of knowledge on the subject. Addressing the findings offered in recent research publications gives the researchers a better grasp of the topic. We checked all the characteristics, such as challenges, recommendations for future work were analyzed in detail, and the published datasets and their source were presented to facilitate the researchers’ access to them and use it to develop the results achieved previously.

Existing image enhancement methods have problems of a slow data transmission and poor conversion effect, resulting in a low image-recognition rate and recognition efficiency. To solve these problems and improve the recognition accuracy and recognition efficiency of image features, this study proposes an edge detail enhancement algorithm for a high-dynamic range image. The original image is transformed by Fourier transform, and the low-frequency and high-frequency images are obtained by the frequency-domain Gaussian filtering and inverse Fourier transform. The low-frequency image is processed by the contrast limited adaptive histogram equalization, and the high-frequency image is obtained by the nonsharpening masking and gray transformation. The low-frequency enhanced and the high-frequency enhanced images are weighted and fused to enhance the edge details of the image. Finally, the experimental results show that the proposed high-dynamic range image edge detail enhancement algorithm maintains the image recognition rate of more than 80% during the practical application, and the recognition time is within 1,200 min, which enhances the image effect, improves the recognition accuracy and recognition efficiency of image characteristics, and fully meets the research requirements.

In order to realize the sustainable development of urban overall space, aiming at the increasingly serious environmental problems in the process of contemporary rapid urbanization, based on the relationship between urban and rural space and environmental capacity, a suitability evaluation method of urban and rural spatial planning based on artificial intelligence is proposed. This paper constructs the theoretical system of sustainable development evaluation of urban and rural spatial resources and uses artificial intelligence technology to reasonably select evaluation factors and standardize the evaluation indicators so as to achieve the research goal of accurately evaluating the suitability of urban and rural spatial planning. It analyzes the influencing factors of urban–rural spatial standard regional division, develops the design of the spatial planning suitability analysis system, and establishes the urban-rural spatial suitability evaluation. The scope of sustainability evaluation was extended to the level of urban and rural spatial planning and design, and the preliminary work was done to solve the problems of urban spatial structure and decision-making. The experimental results show that the planning method has high environmental adaptability and rationality.

To reduce the workload of paper evaluation and improve the fairness and accuracy of the evaluation process, a writing assistant scoring system for English as a Foreign Language (EFL) learners is designed based on the principle of machine learning. According to the characteristics of the data processing process and the advantages and disadvantages of the Browser/Server (B/S) structure, the equipment structure design of the project online evaluation teaching auxiliary system is further optimized. The panda method is used to read the data, the clean method is used to realize the data preprocessing, the model test is carried out, the cross validation method is selected, the data is divided in advance, and the process of programming the problem scoring system is further optimized, the automatic scoring technology is constructed by English teaching recognition module, feature extraction module and scoring module, the table structure of programming problems is designed, the auxiliary evaluation program of English writing is designed, and the design of writing auxiliary scoring system is completed. The analysis of the experimental results shows that the accuracy of the system is close to 90%, and the total average difference is 0.56. The system can normally take out a variety of test papers. Considering the subjectivity of manual scoring and the impact of key code setting on scoring, the carefully set key code can effectively improve the scoring accuracy of the system. The scoring strategy of the automatic scoring system is effective and the scoring effect is good, and it can be used in practical application.

To accurately evaluate and improve college students’ English writing ability, this article proposes a dynamic evaluation method of college English writing ability based on artificial intelligence technology. First, a dynamic evaluation model of college English writing ability is constructed. Second, the index system of English writing dynamic evaluation model is established. Based on this, the dynamic evaluation of college English writing ability is realized. The experimental results show that the design method in this paper can effectively realize the dynamic evaluation of the writing process. After the application of the design method, the number of students interested in writing has increased by 37.8%, and the enthusiasm of students to participate in writing has been improved, with a view to providing some help to improve students’ English writing ability through this research.

A social network image denoising algorithm based on multifeature fusion is proposed. Based on the multifeature fusion theory, the process of social network image denoising is regarded as the fitting process of neural network, and a simple and efficient convolution neural structure of multifeature fusion is constructed for image denoising. The gray features of social network image are collected, and the gray values are denoising and cleaning. Based on the image features, multiple denoising is carried out to ensure the accuracy of social network image denoising algorithm and improve the accuracy of image processing. Experiments show that the average noise of the image processed by the algorithm designed in this study is reduced by 8.6905 dB, which is much larger than that of other methods, and the signal-to-noise ratio of the output image is high, which is maintained at about 30 dB, which has a high effect in the process of practical application.

The installation error of metallurgical machinery parts is one of the common sources of errors in mechanical equipment. Because the installation error of different parts has different influences on different mechanical equipment, a simple linear formula cannot be used to identify the installation error. In the past, the manual recognition method and the touch recognition method lack of error information analysis, which leads to inaccurate recognition results. To improve the problem, an automatic recognition method based on the neural network for metallurgical machinery parts installation error is proposed. According to the principle of automatic recognition of installation error based on the neural network, the nonlinear relation matrix between layers of the neural network is established. The operating state parameters of mechanical equipment are calculated, and the time series of the parameters are divided into several segments averagely. Based on the recognition algorithm, the inspection steps of depth, perpendicularity and center position of reserved hole, base board construction, short-circuit motor line and terminal installation, center mark board, and reference point installation are designed. The experimental results show that the recall rate of the proposed method is 97.66%, and the maximum absolute deviation is 0.09. The experimental data verify the feasibility of the proposed method.

The traditional recognition method of whitewash behavior of accounting statements needs to analyze a large number of special data samples. The learning rate of the algorithm is low, resulting in low recognition accuracy. To solve the aforementioned problems, this article proposes a method to identify the whitewash behavior of university accounting statements based on the FCM clustering algorithm. This article analyzes the motivation of university accounting statement whitewashing behavior, studies the common means of statement whitewashing, and establishes a fuzzy set for the identification of university accounting statement whitewashing behavior. By calculating the fuzzy partition coefficient, the membership matrix of whitewash behavior recognition is established, and the whitewash behavior is classified through the iteration of the FCM algorithm. The comparative experimental results show that the recognition method has good recognition performance, low recognition error rate, and recognition accuracy of 82%.

To enhance the emotional communication of image oil painting art and better analyze the image oil painting art, this article puts forward the research on color emotional information communication in image oil painting art. First, starting from the artistic characteristics of color and its embodiment in various oil painting art forms, this article expounds the relationship and the significance between color language and emotional expression. Then, it summarizes the development of color in image oil painting from a macro perspective and analyzes the emotional expression of color in oil painting. Finally, it discusses the color law of the oil painting art and analyzes the emotional expression of the oil painting art from two aspects: image and artistic conception. The research shows that the design method can better convey emotion and make it easier for people to understand the connotation of image oil paintings.

In order to highlight the role of music teaching in the teaching of ideological and political courses, this study puts forward research on the integration of music teaching and ideological and political teaching. This study analyzes the promotion and necessity of college music teaching to ideological and political work, constructs a fusion model of college music teaching and ideological and political work, introduces deep learning methods, and weakens the influence of errors in the data of college music teaching and ideological and political work. This study also optimized the integration mode of college music teaching and ideological and political work and realized the model research of college music teaching and ideological and political work. The experimental results show that the resource output amplitude controlled by the deep learning method has the best stability, and there is no large amplitude fluctuation during the experiment. The output amplitude and control time of the fusion resource are guaranteed and the fusion path of music teaching and ideological and political education is clearer. The maximum control time of the fusion resource of this method is 23.55 ms.

In order to improve the integrity of the social network behavior feature extraction results for sports college students, this study proposes to be based on the clustering algorithm. This study analyzes the social network information dissemination mechanism in the field of college students’ sports, obtains the real-time social behavior data in the network environment combined with the analysis results, and processes the obtained social network behavior data from two aspects of data cleaning and de-duplication. Using clustering algorithm to determine the type of social network user behavior, setting the characteristics of social network behavior attributes, and finally through quantitative and standardized processing, get the results of college students’ sports field social network behavior characteristics extraction. The experimental results showed that the completeness of the method feature extraction results improved to 9.93%, and the average extraction time cost was 0.344 s, with high result integrity and obvious advantages in the extraction speed.

The multimedia technology and computer technology supported by the development of modern science and technology provide an important platform for the development of college physical education teaching activities. To better play the role of network auxiliary teaching platform in college sports teaching and improve the effectiveness of college sports teaching, the construction method of multimedia auxiliary teaching effect evaluation model based on the random number forest algorithm is proposed. Through the specification of the random forest algorithm and the optimization of the teaching quality evaluation index, the auxiliary teaching level of the college physical education network is analyzed, and the evaluation of the multimedia auxiliary teaching effect of the physical education courses is completed. The experimental results verify the effectiveness of the evaluation model designed in this article, with a user satisfaction of 72%. Teachers and students can use the evaluation model to improve the teaching quality and teaching efficiency, improve the management work, and promote the scientific, standardization, and specialization of physical education teaching management in colleges and universities.

The existing risk assessment and control methods of enterprise risk financing have a large error in mobile data, which leads to inaccurate risk assessment results and low-risk optimization control efficiency. In order to improve the accuracy of risk financing risk assessment for small and medium-sized enterprises (SMEs) and risk control optimization efficiency, this article proposes risk assessment and risk control algorithms for SMEs in the era of big data. Through verifying the information of the loan application and supplementing the data during the loan period, invoke the existing enterprise financing risk database, establish the SME venture financing risk assessment model; build the risk evaluation index system according to the characteristics of the enterprise production organization, process characteristics, and the development of the socioeconomic and technical environment; apply the GA–PSO algorithm to the design of the SME risk financing risk control scheme, and complete the SME risk financing risk assessment and risk control. The experimental results show that the risk optimization control efficiency of the control algorithm reaches more than 70%, and the risk assessment accuracy of SMEs reaches over 95%, and the runtime less than 80 ms, with good convergence performance of risk assessment and control, strong risk optimization control ability, and accurate evaluation effect.

Because the traditional social media fuzzy static image interactive three-dimensional (3D) reconstruction method has the problem of poor reconstruction completeness and long reconstruction time, the social media fuzzy static image interactive 3D reconstruction method is proposed. For preprocessing the fuzzy static image of social media, the Harris corner detection method is used to extract the feature points of the preprocessed fuzzy static image of social media. According to the extraction results, the parameter estimation algorithm of contrast divergence is used to learn the restricted Boltzmann machine (RBM) network model, and the RBM network model is divided into input, output, and hidden layers. By combining the RBM-based joint dictionary learning method and a sparse representation model, an interactive 3D reconstruction of fuzzy static images in social media is achieved. Experimental results based on the CAD software show that the proposed method has a reconstruction completeness of above 95% and the reconstruction time is less than 15 s, improving the completeness and efficiency of the reconstruction, effectively reconstructing the fuzzy static images in social media, and increasing the sense of reality of social media images.

To optimize the data clustering effect of public health emergencies, an application research on social governance ability under public health emergencies based on artificial intelligence is proposed. First, the firefly optimization algorithm is used to collect the information data of the social governance ability of public health emergencies, establish a unified format, and save it. Then, artificial intelligence technology is used to mine the correlation of clustering data, and on this basis, a learning model integrating global structure information and local structure information is established. Finally, the social governance model under public health emergencies is established. The experimental results show that the design method has high clustering accuracy, regularization cross index, and adjusted rand index (ARI) index. This shows that the design method can improve the social governance ability of data fusion clustering and improve the social governance ability.

On the basis of analyzing the complexity of railway flatcar loading optimization problem, according to the characteristics of railway flatcar loading, based on the situation of railway transport loading unit of multiple railway flatcars, this study puts forward the optimal loading optimization method of multimodel railway flatcars based on improved genetic algorithm, constructs the linear programming model of railway flatcar loading optimization problem, and combines with the improved genetic algorithm to solve the problem. The study also analyzes the structural characteristics of the optimal loading materials of multimodel railway flatcars, selects the optimal materials and inputs the relevant data into the computer, and uses MATLAB to program the optimal loading algorithm of multimodel railway flatcars. Through the analysis of the calculation example, the study discusses its scope of application. The experimental results show that the average general utilization rate of the proposed method is 73%, which has higher universality, more effective application, and fully meets the research requirements. It is verified that the proposed method has a statistically significant impact on the optimal loading of multi-type railway flatcars.

Nowadays, the modern management is promoted to resolve the issue of unreliable information transmission and to provide work efficiency. The basic aim of the modern management is to be more effective in the role of the school to train talents and serve the society. This article focuses on the application of data mining (DM) in the development of information management system (IMS) in universities and colleges. DM provides powerful approaches for a variety of educational areas. Due to the large amount of student information that can be used to design valuable patterns relevant to student learning behavior, research in the field of education is continuously expanding. Educational data mining can be used by educational institutions to assess student performance, assisting the institution in recognizing the student’s accomplishments. In DM, classification is a well-known technique that has been regularly used to determine student achievement. In this study, the process of DM and the application research of association rules is introduced in the development of IMS in universities and colleges. The results show that the curriculum covers the whole field and the minimum transaction support count be 2, min conf = 70%. The results also suggested that students who choose one course also tend to choose the other course. The application of DM theory in university information will greatly upsurge the data analysis capability of administrators and improve the management level.

For a better detection in Network information security monitoring system, the author proposes a method based on adaptive depth detection. A deep belief network (DBN) was designed and implemented, and the intrusion detection system model was combined with a support vector machine (SVM). The data set adopts the NSL-KDD network communication data set, and this data set is authoritative in the security field. Redundant cleaning, data type conversion, normalization, and other processing operations are performed on the data set. Using the data conversion method based on the probability mass function probability mass function coding, a standard data set with low redundancy and low dimensionality can be obtained. Research indicates that when the batch size reaches 64, the accuracy of the test set reaches its maximum value. As the batch size increases, the accuracy first increases and then decreases. When the batch size continues to increase, the model will inevitably fall into the local optimal state, resulting in the degradation of the detection performance of the system. In terms of the false alarm rate, the DBN-SVM model is also the highest; however, it is only 10.73%. Under the premise of increasing the detection rate, the false alarm rate is improved; for the overall detection performance of the model, it is within an acceptable range. In terms of accuracy, the DBN-SVM model also scored the highest. The accuracy rate is the ratio of normal and correct classification for intrusion detection. It can explain the detection ability of the model. In summary, the overall detection ability of the DBN-SVM model is the best. The good classification ability to use SVM is proved, and the classification of low-dimensional features is expected to increase the detection rate of the system.

To optimize the weak robustness of traditional face recognition algorithms, the classification accuracy rate is not high, the operation speed is slower, so a face recognition algorithm based on local binary pattern (LBP) and stacked autoencoder (AE) is proposed. The advantage of LBP texture structure feature of the face image as the initial feature of sparse autoencoder (SAE) learning, use the unified mode LBP operator to extract the histogram of the blocked face image, connect to form the LBP features of the entire image. It is used as input of the stacked AE, feature extraction is done, realize the recognition and classification of face images. Experimental results show that the recognition rate of the algorithm LBP-SAE on the Yale database has achieved 99.05%, and it further shows that the algorithm has a higher recognition rate than the classic face recognition algorithm; it has strong robustness to light changes. Experimental results on the Olivetti Research Laboratory library shows that the developed method is more robust to light changes and has better recognition effects compared to traditional face recognition algorithms and standard stack AEs.

Due to the complexity and versatility of network security alarm data, a cloud-based network security data extraction method is proposed to address the inability to effectively understand the network security situation. The information properties of the situation are generated by creating a set of spatial characteristics classification of network security knowledge, which is then used to analyze and optimize the processing of hybrid network security situation information using cloud computing technology and co-filtering technology. Knowledge and information about the security situation of a hybrid network has been analyzed using cloud computing strategy. The simulation results show that a cyber security crash occurs in window 20, after which the protection index drops to window 500. The increase in the security index of 500 windows is consistent with the effectiveness of the concept of this document method, indicating that this document method can sense changes in the network security situation. Starting from the first attacked window, the defense index began to decrease. In order to simulate the added network defense, the network security events in the 295th time window were reduced in the original data, and the defense index increased significantly in the corresponding time period, which is consistent with the method perception results, which further verifies the effectiveness and reliability of this method on the network security event perception. This method provides high-precision knowledge of network security situations and improves the security and stability of cloud-based networks.

The topology optimization of computer communication network is studied based on improved genetic algorithm (GA), a network optimization design model based on the establishment of network reliability maximization under given cost constraints, and the corresponding improved GA is proposed. In this method, the corresponding computer communication network cost model and computer communication network reliability model are established through a specific project, and the genetic intelligence algorithm is used to solve the cost model and computer communication network reliability model, respectively. It has been proved that GA can solve the complex problems of computer working environment better, which is 80% higher than the general algorithm, and can select the optimal scheme pertinently.

Two analyzes of Spark engine performance strategies to implement the Spark technique in a matrix distributed computational algorithm, the multiplication of a sparse multiplication operational test model. The dimensions of the two input sparse matrices have been fixed to 30,000 × 30,000, and the density of the input matrix have been changed. The experimental results show that when the density reaches about 0.3, the original dense matrix multiplication performance can outperform the sparse-sparse matrix multiplication, which is basically consistent with the relationship between the sparse matrix multiplication implementation in the single-machine sparse matrix test and the computational performance of the local native library. When the density of the fixed sparse matrix is 0.01, the distributed density-sparse matrix multiplication outperforms the same sparsity but uses the density matrix storage, and the acceleration ratio increases from 1.88× to 5.71× with the increase in dimension. The overall performance of distributed operations is improved.

The construction of a financial risk prediction model has become the need of the hour due to long-term and short-term violations in the financial market. To reduce the default risk of peer-to-peer (P2P) companies and promote the healthy and sustainable development of the P2P industry, this article uses a model based on the LightGBM (Light Gradient Boosting Machine) algorithm to analyze a large number of sample data from Renrendai, which is a representative platform of the P2P industry. This article explores the base LightGBM model along with the integration of linear blending to build an optimal default risk identification model. The proposed approach is applicable for a large number of multi-dimensional data samples. The results show that the prediction accuracy rate of the LightGBM algorithm model on the test set reaches 80.25%, which can accurately identify more than 80% of users, and the model has the best prediction performance in terms of different performance evaluation indicators. The integration of LightGBM and the linear blending approach yield a precision value of 91.36%, a recall of 75.90%, and an accuracy of 84.36%. The established LightGBM algorithm can efficiently identify the default of the loan business on the P2P platform compared to the traditional machine learning models, such as logistic regression and support vector machine. For a large number of multi-dimensional data samples, the LightGBM algorithm can effectively judge the default risk of users on P2P platforms.

To study the development trend of embedded platforms in home appliances Internet of Things (IoT), an application of embedded Linux in the design of IoT gateway is designed. ARM microprocessor S3C2410, EM310 radio frequency (RF) module, and Ethernet DM9000A module are used to realize the home network information-processing platform. The platform utilizes existing network facilities, RF modules, and network interface modules to realize the interconnection of the home perception network through wireless or wired links. For experimental analysis, Ping the central server (gateway) from the IoT node B is set to twice: The first time ttl = 255 time = 1.9 ms, the second time: ttl = 255 time = 2.4 ms. After application verification, the system has the characteristics of low cost, small size, low power consumption, and vital ease of use. It can not only integrate the home Internet and the IoT gateway but also directly run application-layer communication protocols such as HTTP/MQTT between IoT nodes and Internet terminals. The design supports multi-hop communication and significantly increases the deployment range of IoT nodes without signal relay equipment, hence reducing the cost of IoT networking and the complexity of the network architecture.

To study the static software defect detection system, based on the traditional static software defect detection system design, a new static software defect detection system design based on big data technology is proposed. The proposed method can optimize the distribution of test resources and improve the quality of software products by predicting the potential defect program modules and design the software and hardware of the static software defect detection system of big data technology. It is found that the traditional static software defect detection system design based on code source data takes a long time, averaging 65 h /day. However, the traditional static software defect detection system based on deep learning has a short detection time, averaging 35 h/day. In this article, the detection time of the static software defect detection system based on big data is shorter than that of the other two traditional system designs, with an average of 15 h/day. Because the system design adjusts the operating state of the system, it improves the accuracy of data operation. On the premise of data collection, the system inspection research is completed, which ensures the operational safety of software data, alleviates the contradiction between system and data to a high degree, improves the efficiency of system operation, reduces unnecessary operations, further shortens the time required for inspection, improves the system performance, and has higher research and operation value.

In recent years, the network has become more complex, and the attacker’s ability to attack is gradually increasing. How to properly understand the network security situation and improve network security has become a very important issue. In order to study the method of extracting information about the security situation of the network based on cloud computing, we recommend the technology of knowledge of the network security situation based on the data extraction technology. It converts each received cyber security event into a standard format that can be defined as multiple brochures, creating a general framework for the cyber security situation. According to the large nature of network security situation data, the Hadoop platform is used to extract aggregation rules, and perform model extraction, pattern analysis, and learning on a network security event dataset to complete network security situation rule mining, and establish a framework for assessing the state of network security. According to the results of the federal rule extraction, the level of network node security risk is obtained in combination with signal reliability, signal severity, resource impact, node protection level, and signal recovery factor. A simulation test is performed to obtain the intrusion index according to the source address of the network security alarm. Through the relevant experiments and analysis of the results, the attack characteristics obtained in this study were obtained after manually reducing the network security event in the 295 h window. The results show that after the security event is canceled, the corresponding window attack index decreases to 0, indicating that this method can effectively implement a network security situation awareness. The proposed technique allows you to accurately sense changes in network security conditions.

The aim of this article was to discuss the modeling and control method of quadrotor unmanned aerial vehicle (UAV). In the process of modeling, mechanism modeling and experimental testing are combined, especially the motor and propeller are modeled in detail. Through the understanding of the body structure and flight principle of the quadrotor UAV, the Newton–Euler method is used to analyze the dynamics of the quadrotor UAV, and the mathematical model of the UAV is established under the small angle rotation. Process identifier (PID) is used to control it. First, the attitude angle of the model is controlled by PID, and based on this, the speed in each direction is controlled by PID. Then, the PID control of the four rotor aircraft with the center of gravity offset is simulated by MATLAB. The results show that the pitch angle and roll angle can be controlled by 5 degrees together without center of gravity deviation, and the PID can effectively control the control quantity and achieve the desired effect in a short time. Classical BP algorithm, classical GA-BP algorithm, and improved GA-BP algorithm were trained, respectively, with a total of 150 sets of training data, training function uses Levenberg-Marquardt (trainlm), and performance function uses mean squared error (MSE). In the background of the same noise, the improved GA-BP algorithm has the highest detection rate, classical GA-BP algorithm is the second, and classical BP algorithm is the worst. The simulation results show that the PID control law can effectively control the attitude angle and speed of the rotor UAV in the case of center of gravity deviation.

This article aims to study the simulation and design of automobile automatic clutch under mechatronics. A new control strategy for the automatic clutch of the electromagnetic transmission is proposed. The clutch mechanism model, clutch drive model, clutch system model, and internal combustion engine model are constructed. The fuzzy logic control performance of the automatic clutch was verified in different operating modes, including starting on flat roads and mountain roads. The method provides a reasonable reference for the design of an automatic clutch of electromagnetic continuously variable transmission.

This article mitigates the challenges of previously reported literature by reducing the operating cost and improving the performance of network. A genetic algorithm-based tabu search methodology is proposed to solve the link capacity and traffic allocation (CFA) problem in a computer communication network. An efficient modern super-heuristic search method is used to influence the fixed cost, delay cost, and variable cost of a link on the total operating cost in the computer communication network are discussed. The article analyses a large number of computer simulation results to verify the effectiveness of the tabu search algorithm for CFA problems and also improves the quality of solutions significantly compared with traditional Lagrange relaxation and subgradient optimization algorithms. The experimental results show that with the increase of the weighted coefficient of variable cost, the proportion of variable cost in the total cost increases from 10 to 35%. The growth is relatively slow, and the fixed cost is still the main component. In addition, due to the increase in the variable cost, the tabu search algorithm will also choose the link with large luxury to reduce the variable cost, which makes the fixed cost slightly increase, while the network delay cost and average delay slightly decrease. The proposed method, when compared with the genetic algorithm, has more advantages for large-scale or heavy-load networks.

With the rapid development of the Internet, recommendation systems have received widespread attention as an effective way to solve information overload. Social tagging technology can both reflect users’ interests and describe the characteristics of the items themselves, making group recommendation thus becoming a recommendation technology in urgent demand nowadays. In traditional tag-based recommendation systems, the general processing method is to calculate the similarity and then rank the recommended items according to the similarity. Without considering the influence of continuous user behavior, in this article, we propose a personalized recommendation algorithm based on social tags by combining the ideas of Markov chain and collaborative filtering. This algorithm splits the three-dimensional relationship of <user-tag-item> into two two-dimensional relationships of <user-tag> and <tag-item>. The user’s interest degree to the tags is calculated by the Markov chain model, and then the items corresponding to them are matched by the recommended tag set. The influence between tags is used to model the satisfaction of items based on the correlation between the tags contained in the matched items, and collaborative filtering is used to complete the sparse values when calculating the interest and satisfaction between user–tags and user–items to improve the accuracy of recommendations. The experiments show that in the publicly available dataset, the personalized recommendation algorithm proposed in this article has significantly improved in accuracy and recall rate compared with the existing algorithms.

As an important part of Chinese economy, the construction industry has a great contribution to the economy, and plays an important role in the Chinese economic development. Therefore, it has certain research significance for the quality acceptance supervision method of construction engineering. This article takes Shenzhen S project as an example, combined with cloud computing, discusses the quality acceptance and supervision methods of indoor construction projects. In the introduction to the technical part, this article first briefly introduces the definition of cloud computing and then introduces the particle swarm algorithm and traditional genetic algorithm in the cloud computing task scheduling method. The algorithm is introduced into the quality acceptance of indoor construction projects to obtain the quality, most efficient method for acceptance supervision. The experimental part of this article takes S project as the research object and the residents’ satisfaction with the project as the experimental purpose. Finally, through statistical analysis, it is concluded that the residents’ satisfaction with S project reaches more than 70%.

The power grid is an important connection between power sources and users, responsible for supplying and distributing electric energy to users. Modern power grids are widely distributed and large in scale, and their security faces new problems and challenges. Information entropy theory is an objective weighting method that compares the information order of each evaluation index to judge the weight value. With the wide application of entropy theory in various disciplines, the subject of introducing entropy into the power system has been gradually concerned. This article aims to study the smart terminal security technology of the power grid perception layer based on information entropy data mining. This article analyzes its related methods and designs a smart terminal for the power grid. On this basis, a data analysis platform is built and a safety plan is designed. The result is that the average absolute error, root mean square error, average absolute percentage error, and mean square error of the platform's power load forecast are 1.58, 1.96, 8.2%, and 3.93, respectively. These error values are within the ideal range, and the data processing ability is strong. The packet loss rate of the adversary's eavesdropping was tested, and the average packet loss rates at locations a, b, c, and d were 1.05, 1.2, 1.81, and 2.2%, respectively. Data packets will be definitely lost, so the platform is highly secure.

Nowadays, the development of human society and daily life are inseparable from the power supply. Therefore, people also put forward higher requirements for the reliability of distribution network, but power companies can only passively deal with distribution network failures, which is a bottleneck for the improvement of distribution network reliability. The Internet of Things (IoT) is the best solution for online equipment status monitoring and basic data sharing for large, widely distributed, relatively fixed, and large numbers of equipment. The construction of the IoT for power distribution equipment faces many important problems, including the selection of networking, equipment selection, and interaction standards. When researching the implementation plan, research on the distribution of IoT market was carried out. Based on the grid, the idea of optimizing the investment selection plan of the power distribution using IoT was discussed, and a result verification model was established. After the completion of the theoretical part, a case study of medium-voltage distribution grid equipment management and medium-voltage distribution network equipment management based on the grid was carried out by taking a real enterprise application situation as an example. Realizing fault diagnosis of distribution network will not only provide decision support for operation and maintenance of distribution network for power companies, but also have great economic and social benefits. Aiming at the shortcomings of single data mining method in distribution network fault diagnosis, hybrid data mining method is proposed. First, rough set theory is used to reduce the original fault data and form a simplified rule set. Because of the non-linearity of distribution network fault and the strong learning ability, adaptability, and robustness of Bayesian network, Bayesian network can be used to classify distribution network faults. Therefore, a simplified fault diagnosis system is established in this paper, and its correctness is confirmed. Then, the learning and training are carried out by using Bayesian network to call the simplest rule set, which has the characteristics of short learning and training time and high diagnostic accuracy.

With the rapid development of China’s social economy and the improvement of the level of urbanization, urban transportation has also been greatly developed. With the booming development of the internet and the sharing economy industry, shared bicycles have emerged as the times requirement. Shared bicycles are a new type of urban transportation without piles. As a green way of travel, shared bicycles have the advantages of convenience, fashion, green, and environmental protection. However, many problems have also arisen in the use of shared bicycles, such as man-made damage to the vehicle, the expiration of the service life of the vehicle, etc. These problems are unavoidable, and the occurrence of these failure problems will also cause serious harm to the use of shared bicycles. This article aims to study the path optimization of shared bicycles considering the recovery of faulty vehicles during dispatching. Based on the K-means spatial data clustering algorithm, a path optimization experiment of shared bicycle recycling scheduling considering the recycling of faulty vehicles is carried out. The experiment concluded that the shared bicycle recycling scheduling path based on K-means clustering planning significantly reduces the total time spent and the total cost of performing recycling scheduling tasks. Among them, the unit price of recycling and dispatching of each faulty shared bicycle has dropped by 4.1 yuan compared with the market unit price. The conclusion shows that the shared bicycle recycling scheduling path considering faulty vehicle recycling based on K-means clustering algorithm has been greatly optimized.

With the continuous development of society, the role of the visual guidance system in animation design has also evolved and evolved in its long history, leading to the changes in the values of modern beauty. In the field of modern social and cultural design, the visual guidance system in animation design has unique regional nature and cultural influence. The visual language should correspond to the visual environment and easy to understand and be known by people. It combines animation conception and design technology to capture the cultural charm and beauty, values, and behavioral norms of people in different fields. This article studies and analyzes the visual orientation of graphic language in the design of animation visual guidance system, and injects the graphic language with orientation into its animation design, so that the animation design is more in line with the characteristics of the times. It can be more adapted to the emerging media and better convey the information transfer between the enterprise and the audience. To further understand the audience’s tendency toward elements of graphic expression, this article analyzes the subjective perceptions of the respondents on the importance of color selection, calligraphy fonts, graphic expression, and modeling meaning. The results of the study showed that the respondents aged 21–35 paid more attention to the choice of graphic colors, and the highest number was 69.

The development and application scope of the Internet of Things is also becoming more and more extensive. Especially in the application of power testing improved systems, great progress has been made. This article aims to study how to analyze the system detection equipment based on the Internet of Things. This article describes the basic theoretical knowledge of the Internet of Things and power detection improved systems. A clustering analysis algorithm and a support vector machine algorithm based on the Internet of Things are proposed. In the experiment of this article, the scoring items of the expert’s traditional detection system include complex technology, inconvenient use, and incomplete intelligence. Among them, the highest score for complex technology is 8.6 points, the lowest score is 7 points; the highest score for inconvenience is 8.6 points, and the lowest is 8.3 points. It can be seen that related experts believe that the traditional power detection improved system is not only very complicated in technology, very inconvenient to use but also incompletely intelligent. Therefore, it is very necessary to study the system detection equipment based on the Internet of Things.

In today’s era of rapid development in science and technology, the development of digital technology has increasingly higher requirements for data processing functions. The matrix signal commonly used in engineering applications also puts forward higher requirements for processing speed. The eigenvalues of the matrix represent many characteristics of the matrix. Its mathematical meaning represents the expansion of the inherent vector, and its physical meaning represents the spectrum of vibration. The eigenvalue of a matrix is the focus of matrix theory. The problem of matrix eigenvalues is widely used in many research fields such as physics, chemistry, and biology. A neural network is a neuron model constructed by imitating biological neural networks. Since it was proposed, the application research of its typical models, such as recurrent neural networks and cellular neural networks, has become a new hot spot. With the emergence of deep neural network theory, scholars continue to combine deep neural networks to calculate matrix eigenvalues. This article aims to study the estimation and application of matrix eigenvalues based on deep neural networks. This article introduces the related methods of matrix eigenvalue estimation based on deep neural networks, and also designs experiments to compare the time of matrix eigenvalue estimation methods based on deep neural networks and traditional algorithms. It was found that under the serial algorithm, the algorithm based on the deep neural network reduced the calculation time by about 7% compared with the traditional algorithm, and under the parallel algorithm, the calculation time was reduced by about 17%. Experiments are also designed to calculate matrix eigenvalues with Obj and recurrent neural networks (RNNS) models, which proves that the Oja algorithm is only suitable for calculating the maximum eigenvalues of non-negative matrices, while RNNS is commonly used in general models.

The development of the times is driving the competition in the market. In the current trend of the brand era, if a brand cannot fully display its own personality, it is difficult to be competitive. With the development of Internet of things (IoT) technology, different enterprise values produce different types of products and affect all aspects of social economy and daily life. This article mainly studies the innovative design of brand image based on 5G IoT era. This article takes the consumer group as the positioning object, is committed to shaping the core value of the brand, and applies the emotional personality psychology of consumers to the rational brand planning. Creating a perfect brand image and an accurate brand development track is an effective guarantee to promote and enhance brand development. The standard font of the logo combination is the combination of Chinese and English. The advantage of the combination of Chinese and English lies in the combination of nationality and cosmopolitanism. It is not only a new cultural phenomenon but also has strong operability, which meets the requirements of logo design internationalization. The explanatory capacity of the model increases with the entry of product image, corporate image, and self-consistency. The combined explanatory capacity of the three variables reaches 42.2%. The significance probability of the F test is p = 0.000, which is significantly less than 0.01, indicating that the regression of the model is significant. Except for “imaginative,” girls’ scores on the other seven brand personality dimensions are equal to or higher than boys’. The results show that the innovative design of brand image has far-reaching significance for the long-term development of the brand.

At present, most of the research in the field of medical-assisted diagnosis is carried out based on image or electronic medical records. Although there is some research foundation, they lack the comprehensive consideration of comprehensive image and text modes. Based on this situation, this article proposes a fusion classification auxiliary diagnosis model based on GoogleNet model and Bi-LSTM model, uses GoogleNet to process brain computed tomographic (CT) images of ischemic stroke patients and extract CT image features, uses Bi-LSTM model to extract the electronic medical record text, integrates the two features using the full connection layer network and Softmax classifier, and obtains a method that can assist the diagnosis from two modes. Experiments show that the proposed scheme on average improves 3.05% in accuracy compared to individual image or text modes, and the best performing GoogleNet + Bi-LSTM model achieves 96.61% accuracy; although slightly less in recall, it performs better on F 1 values, and has provided feasible new ideas and new methods for research in the field of multi-model medical-assisted diagnosis.

Effective and personalized treatment relies heavily on skin disease categorization. In the stratification of skin disorders, it is crucial to identify the subtypes of illnesses to provide an efficient therapy. To attain this aim, researchers have focused their attention on cluster algorithms for the stratification of skin disorders in recent decades. But, cluster algorithms have real-world drawbacks, including experimental noises, a large number of dimensions, and a poor ability to comprehend. Cluster algorithms, in particular, determine the quality of clusters using a single internal evaluation operation in the majority of cases. A single internal assessment procedure is difficult to design and robust for all datasets, which is a problem. The multi-objective particle swarm obtained high sensitivity in the existing work, but it is not able to anticipate all kinds of classes. An optimized cluster distance parameter for K -means clustering is determined using a hybrid particle swarm and moth flame optimization. Multi-objective is guided by two cluster value indices, including the K -means clustering misclassification rate and neural network classification rate. Hybrid PSO will solve the multi-objective problem to identify the optimal cluster for clustering. On the dermatological dataset from the UCI repository, MATLAB R2020a will be used to evaluate the proposed method. This will be followed by an evaluation of the proposed method’s performance using the cluster evaluation indices.

Day-to-day lives are affected globally by the epidemic coronavirus 2019. With an increasing number of positive cases, India has now become a highly affected country. Chronic diseases affect individuals with no time identification and impose a huge disease burden on society. In this article, an Efficient Recurrent Neural Network with Ensemble Classifier (ERNN-EC) is built using VGG-16 and Alexnet with weighted model to predict disease and its level. The dataset is partitioned randomly into small subsets by utilizing mean-based splitting method. Various models of classifier create a homogeneous ensemble by utilizing an accuracy-based weighted aging classifier ensemble, which is a weighted model’s modification. Two state of art methods such as Graph Sequence Recurrent Neural Network and Hybrid Rough-Block-Based Neural Network are used for comparison with respect to some parameters such as accuracy, precision, recall, f 1-score, and relative absolute error (RAE). As a result, it is found that the proposed ERNN-EC method accomplishes accuracy of 95.2%, precision of 91%, recall of 85%, F 1-score of 83.4%, and RAE of 41.6%.

Recently, big data analytics have gained significant attention in healthcare industry due to generation of massive quantities of data in various forms such as electronic health records, sensors, medical imaging, and pharmaceutical details. However, the data gathered from various sources are intrinsically uncertain owing to noise, incompleteness, and inconsistency. The analysis of such huge data necessitates advanced analytical techniques using machine learning and computational intelligence for effective decision making. To handle data uncertainty in healthcare sector, this article presents a novel metaheuristic rough set-based feature selection with rule-based medical data classification (MRSFS-RMDC) technique on MapReduce framework. The proposed MRSFS-RMDC technique designs a butterfly optimization algorithm for minimal rough set selection. In addition, Hadoop MapReduce is applied to process massive quantity of data. Moreover, a rule-based classification approach named Repeated Incremental Pruning for Error Reduction (RIPPER) is used with the inclusion of a set of conditional rules. The RIPPER will scale in a linear way with the number of training records utilized and is suitable to build models with data uncertainty. The proposed MRSFS-RMDC technique is validated using benchmark dataset and the results are inspected under varying aspects. The experimental results highlighted the supremacy of the MRSFS-RMDC technique over the recent state of art methods in terms of different performance measures. The proposed methodology has achieved a higher F -score of 96.49%.