Impact Factor: 3.2

Zeitschrift Open Access

Corrosion Reviews

Editors-in-Chief: Raúl B. Rebak und Martin A. Rodriguez

Sprache: Englisch

Erstveröffentlichung: 1. September 1987

Erscheinungsweise: 6 Hefte pro Jahr

Neuestes Heft anzeigen

Veröffentlicht von

Veröffentlichen auch Sie bei De Gruyter Brill

Manuskript einreichen Informationen für Autor*innen Erkunden Sie dieses Fachgebiet

Über diese Zeitschrift

Corrosion Reviews will become an Open Access Journal from 2025

Corrosion Reviews will become an open access journal from 2025 onwards. Any submissions made to the journal after the 1^st November 2024 will be published Open Access under a CC-BY License and will be subject to an article processing charge (APC), if they are accepted for publication. Further information can be found on the submit tab. For any queries relating to the change to open access please contact the Corrosion Reviews editorial office.

Objective
Corrosion Reviews is an international bimonthly journal devoted to critical reviews and, to a lesser extent, outstanding original articles that are key to advancing the understanding and application of corrosion science and engineering in the service of society. Papers may be of a theoretical, experimental or practical nature, provided that they make a significant contribution to knowledge in the field.

Topics
Cutting-edge topics such as but not limited to the following:

Corrosion of materials in energy systems
Corrosion of biomaterials and medical devices
Corrosion of materials in the chemical process industries
High temperature corrosion
Nuclear waste disposal
The effect of corrosion on water pollution and the environment
Corrosion of advanced materials
Degradation of non-metals
Corrosion control and monitoring techniques
Modeling and life prediction

Article formats
Review articles and highly-relevant original articles

> Information on submission process

Ihre Vorteile

Your benefits:

Cutting-edge topics in the field of corrosion science
Theoretical, experimental or practical approach to significant topics
Critical and exhaustive approach to potential technologies
International, authoritative editors and reviewers boosting the prestige of published papers
Publication online and print incl. ahead of print mode
From 2025 Corrosion Reviews will be an open access journal, ensuring the widest possible visibility of your research

Geschichte

Corrosion Reviews was previously published by Freund Publishing House Ltd.

Open Access
Machine learning–assisted in situ corrosion monitoring: a review

22. September 2025

Ruiyi Li, Huanchun Wang, Yuhao Zhu, Xiaogang Mu, Xuanjun Wang

PDF downloaden

As the critical first step in structural health management and fault diagnosis, corrosion monitoring is inherently multidisciplinary in nature. While conventional in situ techniques capture real-time electrical, vibrational, and thermal signatures, their effectiveness is constrained by limited detection precision, inefficient data analysis, and unreliable predictive modeling. The convergence of artificial intelligence (AI) and big data analytics has fundamentally transformed this field, generating considerable academic interest over the past decade. Machine learning (ML) – serving as the cornerstone of this revolution – excels not only in extracting nonlinear features from nonstationary processes but also employs probabilistic inference frameworks to quantify predictive uncertainty, thereby substantially augmenting in situ monitoring capabilities. This review systematically examines advancements in ML-assisted corrosion monitoring throughout the preceding decade, categorizing prevalent algorithms according to domain-specific implementations while evaluating enhanced in situ techniques through empirical case studies demonstrating superior data processing efficacy. Finally, we project future trajectories for intelligent monitoring technology in light of persistent challenges and emergent innovations.
Open Access
Research on simulation testing of humidity-controlled salt spray corrosion environment for electrical products under working conditions

15. August 2025

Chuan Chen, Li Xiang, Jun Wang, Shouhe Wang, Chen Zhu, Ganxin Jie

PDF downloaden

Traditional neutral salt spray tests fail to accurately simulate the accelerated corrosion that occurs under actual energized conditions. We have developed a salt spray test chamber capable of reducing the relative humidity (RH) in the testing environment to prevent short circuits, insulation failures, and other faults that lead to premature damage during testing. Initially, the effect of salt spray concentration on corrosion at 85 % RH was examined, and it was found that the corrosion rate does not increase when the concentration surpasses 50 mg/m 3 . The humidity-controllable salt spray test demonstrated a closer match to real environmental corrosion, judging by both the appearance of corrosion and the acceleration ratios across different metals, where the acceleration ratio difference between maximum and minimum values was reduced from 18.6 times to 1.4 times. The influence of RH on the corrosion rate was revealed, with the highest rate observed at 75 % RH. Lastly, we proposed optimal parameters for energized salt spray tests, evaluated the failure modes of several products under these tests, preliminarily confirmed the consistency and acceleration effects of this method for electrical products in real marine atmospheric conditions.
Open Access
Method of accounting for the accelerated destruction of coupon edges when determining the effectiveness of corrosion inhibitors

9. Juli 2025

Gennadiy G. Matishov, Anatoly B. Laptev, Roustem Z. H. Akhiyarov, Hurshejon K. Djumabaev, Damir M. Kireev, Mickail A. Gorbovets

PDF downloaden

Gravimetric tests are widely used to evaluate the effectiveness of corrosion inhibitors in pipelines and equipment. However, there is always some measurement error due to the more intense corrosion damage to the edges of the samples, and the smaller the sample size, the greater this error will be. The developed method involves testing coupons of different sizes under the same conditions, and then mathematically calculating excess weight loss along the edges of the coupon. In the experiment conducted by the authors, when testing samples in an aggressive environment without an inhibitor, the measured corrosion rate turned out to be 9 % higher than the real one. Similarly, in an environment with an imidazoline inhibitor, the corrosion rate turned out to be 15 % higher than the real one, taking into account the edge effect. The application of the method of accounting for the excessive corrosion rate of the coupon edge will increase the accuracy of gravimetric measurements and increase the accuracy of predicting the timing of structural damage. It will also reduce the costs associated with additional inhibitory treatment.
Open Access
Advanced multifunctional BTA-loaded PANI@SiO₂@h-BN water-based epoxy resins coating with enhanced anti-corrosion and self-repairing abilities

26. Juni 2025

Xiaomei Yu, Qiang Zhao, Jin You Zheng, Mengyuan He, Zhengyu Wei, Dehai Ping, Panfei Sun, Jianmeng Wu, Peng Zhu, Songjie Li

PDF downloaden

Eco-friendly water-based epoxy resins (WEP) coatings are widely applied for surface corrosion protection in marine engineering structures but their anti-corrosion performance needs to be further improved. A novel multifunctional benzotriazole (BTA)-loaded PANI@SiO 2 @h-BN (PSB) composite filler was developed to enhance the anti-corrosion and self-repairing capabilities of WEP coatings. Through sol-gel modification and in-situ polymerization, SiO 2 decoration facilitated the uniform dispersion of two-dimensional hexagonal boron nitride (h-BN) in WEP matrices, while polyaniline (PANI) provided active passivation protection. The synergistic effects of PANI and releasing of BTA inhibitors enable corrosion rates orders of magnitudes lower than pure WEP coating. Electrochemical characterization demonstrated exceptional barrier properties (|Z| at 0.01 Hz > 10 9  Ω cm 2 after 30 days immersion in 3.5 wt% NaCl) and self-repairing functionality through chelate/passivation layer formation. The composite coating exhibited enhanced hydrophobicity, mechanical durability, providing a sustainable solution for marine infrastructure protection.
Open Access
Effect of Al and Y addition on corrosion properties of magnesium alloy

29. Mai 2025

Yu Wen, Chunjie Xu, Nan Li, Xiangquan Wu, Shang Sui

PDF downloaden

Due to its lightweight structure, magnesium alloys have been widely used in the automotive and aerospace industries. However, the corrosion resistance of magnesium alloy is a key factor limiting their further application. Rare earth alloying is an economical and effective method to improve the corrosion resistance of magnesium alloys. In this work, Mg–2Y–2Al (wt%) alloy was prepared by conventional casting method. After 168 h of immersion in 3.5 wt% NaCl solution, the corrosion rates determined by hydrogen evolution test and mass loss experiment were 0.57 mm/y and 1.01 mm/y, respectively. The results provide a basic understanding of the synergistic effect of Al and Y on enhancing the corrosion resistance of magnesium alloys. The co-addition of Al and Y is conducive to the formation of a stronger protective film on the alloy surface and effectively inhibits the corrosion of alloys. It provides important insights for the future development of high-performance and corrosion-resistant magnesium alloys.
Open Access
An assessment of expired drugs’ potential as effective inhibitors to combat carbon steel and mild steel corrosion

29. April 2025

Prakasha Shetty

PDF downloaden

Metal corrosion is a destructive process that must be managed carefully to prevent unintentional material losses. Most organic and inorganic compounds reported as corrosion inhibitors are highly toxic, causing severe environmental pollution. Recently, expired drugs have been tried as green inhibitors for many metals. The effectiveness of expired drugs as corrosion inhibitors was investigated by techniques such as weight loss, linear polarization, potentiodynamic polarization, and electrochemical impedance spectroscopy methods. The surface morphology of specimen metals was tested before and after the addition of drug inhibitors using scanning electron microscopy, atomic force microscopy, X-ray diffraction, etc., to confirm the inhibition behavior of the drugs. Additional parameters by quantum chemical calculations and molecular dynamics study were computed, and the outcomes agreed with the experimental results. These investigations demonstrated the effectiveness of drugs as corrosion inhibitors and opened up possibilities for managing the disposal of expired drugs. The present paper gives an overview of the usage of expired drugs as efficient inhibitors to control the corrosion of carbon steel and mild steel. The comparison of inhibition performances of different expired drugs and the mechanism of corrosion inhibition have been discussed. The existing challenges faced in using expired drugs as inhibitors were highlighted.
Open Access
Deep learning in corrosion assessment and control: a critical review of techniques and challenges

21. April 2025

Monika Rajendran, Deivalakshmi Subbian

PDF downloaden

Deep learning (DL) techniques are advancing quickly, which has increased interest in leveraging them to analyze intricate corrosion patterns and forecast corrosion behavior. This offers a huge challenge across multiple industries, resulting in large financial losses and safety risks. It results in the creation of solutions that are more accurate, effective, and proactive to tackle corrosion-related challenges, thereby enhancing the safety, reliability, and sustainability of vital infrastructure systems. This review commences by utilizing deep learning algorithms and its applications in corrosion assessment across various sectors, encompassing corrosion detection, prediction, classification, and material degradation analysis. The goal is to offer insights in current status and future prospects of corrosion management.
Open Access
Estimation of atmospheric chloride deposition and its corrosion effect in the coastal region of China

21. April 2025

Qian Chen, Xiaobing Ma, Yujie Liu, Yiyang Shangguan, Han Wang, Yikun Cai, Zuxin She

PDF downloaden

Atmospheric chloride deposition rate is the important factor in atmospheric corrosion. However, current research on the distribution of atmospheric chloride deposition in coastal region of China is limited, hindering accurate quantitative analysis of its corrosion effect. We conducted environment monitoring, deposition rate measurement, and metals exposure experiments in coastal region of Hainan Province, China. By analyzing the holistic process of atmospheric chloride, we proposed a deposition rate estimation model considering production, transportation, and deposition (PTD) processes. The proposed PTD regression model significantly improves estimation accuracy and generalizability, achieving an R 2 of 0.88 on the measured dataset. Additionally, based on environmental exposure experiments, we developed a metal corrosion loss assessment model for coastal region, well-validated on the four metals tested, with all R 2 values exceeding 0.92. Using these models, we constructed spatial and temporal distribution maps of atmospheric chloride deposition rate and its corrosion effects in coastal region of Hainan Province, China, providing guidance for the corrosion assessment, protection, and maintenance of metal products.
Open Access
Advancements in prediction models for corrosion in oil and gas pipelines

8. April 2025

Zhiwei Chen, Yuanqing Jin, Xiaochuan Wang, Hong Chen, Baikang Zhu, Weihua Li

PDF downloaden

Oil and gas pipelines play an important role in the energy transportation industry, but metal corrosion can affect the safe operation of pipeline equipment. This study uses CiteSpace software to synthesize and analyze corrosion models and keywords from research institutions, countries, and methods related to pipeline corrosion prediction. The investigation into the mechanisms of pipeline metal corrosion, with a specific emphasis on CO 2 and H 2 S corrosion, has revealed that several factors influence the process, including temperature, partial pressure, medium composition and the corrosion product film. In addition, the study provides a comprehensive review of pipeline corrosion prediction methods and models. These include traditional empirical, semi-empirical, and mechanism-based prediction models, as well as advanced machine learning techniques such as random forest, artificial neural network model, support vector machine, and dose-response function. Although there are many ways to improve model performance, no universally accepted methods have been established. Therefore, further in-depth research is needed to improve the accuracy of these models and provide guidance for improving the operational safety of pipelines.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Effect of seawater intrusion in water-glycol hydraulic fluid on the electrochemical corrosion behavior of carbon steel and stainless steel

11. Februar 2025

Runzhou Xu, Yinshui Liu, Xianchun Jiang, Yipan Deng

PDF downloaden

Water-glycol hydraulic fluid (HFC) has been applied in deep-sea hydraulic systems owing to its flame retardant and environmental performance. However, the corrosion characteristics of metals in HFC have not been widely investigated. The electrochemical corrosion behavior of 45# steel and 17-4PH stainless steel in HFC containing four concentrations of seawater (0 %, 3 %, 11 %, 19 %) were evaluated by potentiodynamic polarizations (−800 mV∼1,500 mV vs. Hg/HgO), electrochemical impedance spectroscopy (EIS), potentiostatic polarizations (0.5 V Hg/HgO ) and immersion test (240 h). The research results indicate that a corrosion-resistant carbon film is formed on the surface of 17-4PH stainless steel and 45# steel in HFC. The infrared spectroscopy results suggest that the formation of the carbon film is due to the adsorption of the benzene ring of tolyltriazole (TTA) in HFC by the metal C. 45# steel exhibited stronger corrosion resistance than 17-4PH stainless steel due to the formation of a denser carbon film through high carbon content adsorption. The infiltration of seawater into HFC enhanced its corrosiveness by enhancing its conductivity and Cl − pitting on the C film. This research is significant as it sheds light on the corrosion behavior of metals in HFC, a crucial aspect in the design and maintenance of deep-sea hydraulic systems.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Durability of a thermally decomposed iridium(IV) oxide–tantalum(V) oxide coated titanium anode in aqueous ammonium citrate

28. Januar 2025

Jianchao Xue, Qing Feng, Changbin Tang, Xiaojun Hao, Zuoqiang Chai, Juanqin Xue, Bo Jia

PDF downloaden

Ti/IrO 2 –Ta 2 O 5 coated anodes were widely used in the production process of aluminum foil that is vital raw material for high-performance electronic components, exhibits excellent service durability in sulfuric acid medium, but its lifespan is significantly reduced when used in ammonium citrate neutral electrolyte. The evolution of constant current accelerated lifetime process of Ti/IrO 2 –Ta 2 O 5 anodes in 100 g/L ammonium citrate aqueous solution was systematically studied. The corrosion mechanism was revealed by physical characterization and electrochemical measurements. During electrolysis, IrO 2 was gradually dissolved due to the interaction of IrO 2 coating and the electrolyte. Consequently, the corrosion mechanism of the compact IrO 2 –Ta 2 O 5 coating is the effect of substantial dissolution of the active components.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Current advancements on magnesium alloy coatings for bioimplants: a closer look for biocompatibility and corrosion mitigation

23. Januar 2025

Kashif Rahmani Ansari, Ambrish Singh, Shivani Singh, Anurag Singh, Ismat H. Ali, Muhammad Younas, Yuanhua Lin

PDF downloaden

The healthcare industry has closely considered magnesium (Mg) alloy because of its exceptional mechanical qualities, biological solid compatibility, and biodegradable properties. Since it has reactive chemistry of natural world, magnesium alloy typically exhibits excessive rate of deterioration in the physiological environment. Thus, surface modification research has become a hotspot for obtaining different potential abilities of magnesium alloy in medical applications. The coatings of magnesium alloy surfaces are discussed in this work based on their many types: metals (metal hydroxides and oxides), inorganic/nonmetallic, and natural/synthetic polymers. The metal oxide coating is loose and porous, and it is often used together with other types of coatings to form a composite coating. The metal hydroxide coating is easily damaged by Cl − ions in corrosive medium and cannot provide long-term effective protection to substrate. Inorganic nonmetallic coatings have more space defects and greater brittleness, which used in few bone implantation procedures. Polymer materials generally have better biocompatibility and biodegradability. However, polymer coatings have a weak binding force to the substrate and limited mechanical properties. The development prospects of magnesium alloy surface coatings for biomedical applications are forecasted together with the manufacturing techniques, resistance to corrosion, and compatibility for biological systems has been discussed.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

The prediction method of the content of salt mist aerosol in marine atmospheric environment based on mechanism and data

1. Januar 2025

Chuan Chen, Li Xiang, Jingyi Zhang, Jun Wang, Yang Wang

PDF downloaden

Salt mist is a significant environmental factor that causes corrosion of marine and coastal engineering facilities and electronic equipment failures. This paper presents a numerical analysis of the properties, formation, migration, and deposition processes of salt mist aerosols according to previous research. We find that salt mist is distributed as exponential distribution in the sea of vertical direction, and the number of them is directly proportional to the wind speed and the effective wave height, the critical velocity of salt mist sedimentation is proportional to the square of the particle radius. Through qualitative and quantitative analysis of related parameters, an empirical model of salt mist concentration distribution and deposition process are established, thereby enabling the calculation of salt mist concentration and deposition rate in coastal land and marine atmospheric environments. To compare with existing prediction methods, the parameters of this model are more comprehensive, not only include various meteorological data, but marine environmental data and other geographic data for calculating location. To illustrate, the model is applied to predict the salt mist concentration and deposition in the Philippines, using readily available meteorological data inputs such as wind speed, direction, temperature, and humidity. This enables the evaluation of corrosion levels.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Microscopic analysis of the destruction of passive film on stainless steel caused by sulfide in simulated cooling water

31. Dezember 2024

Jinrong Huang, Jun Wu, Zhuoran Li, Honghua Ge, Ping Liu

PDF downloaden

Sulfide often appears in circulating cooling water due to the presence of sulfate reducing bacteria and could affect corrosion behavior of cooling pipe metals such as stainless steel. Scanning Kelvin probe and scanning electrochemical microscope measurements, combined with electrochemical testing, were used to investigate the micro-electrochemical information of passive film and analyzed the influence of sulfide in simulated cooling water on corrosion resistance of stainless steel. Results showed that the presence of sulfide in water caused a negative shift in surface potential of stainless steel, an increase in surface potential difference, and an increase in local response current on the surface, resulting in a current peak that gradually increased over time. The analysis results of passive film composition showed that the presence of sulfide caused increase in the ratio of Fe/Cr and OH − /O 2− , as well as the content of Cr(OH) 3 and Fe(OH) 3 in passive film, whereas caused a decrease of Cr 2 O 3 content, and led to the formation of FeS 2 in the passive film. These changes in the composition of the passive film made it easier for active sites to appear on the surface of stainless steel and enhanced the conductivity of the passive film and significantly reducing its protective performance.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Why is the modified wedge-opening-loaded test inadequate for characterizing gaseous hydrogen embrittlement in pipeline steels? A review

31. Dezember 2024

Mariano A. Kappes, Diego Palmerio, Jorge Guerrina, Teresa E. Pérez

PDF downloaden

International hydrogen pipeline code ASME B31.12 requires the measurement of hydrogen affected fracture toughness using constant load or displacement tests standardized in ASTM E1681. The modified wedge-opening-loaded (WOL) specimen is loaded with a bolt that sets a constant crack mouth opening displacement and the initial stress intensity factor (K Iapp ). In this review paper, the sizing restrictions imposed by the testing procedures are analyzed considering the strength, wall thickness, diameter and toughness of existing and commercially available pipelines. The conclusion is that specimens with the standard geometry for constant displacement test in ASTM E1681 cannot be extracted from most used pipelines. The equations proposed in standards to calculate K Iapp as a function of crack mouth opening displacement cannot be applied and particular expressions must be calculated case by case. Furthermore, loading the specimen to the required K Iapp results in exceedingly large normal stresses in the bolt, increasing the risk of fracture of the bolt during loading of the specimen. Additionally, literature results of pipeline stees tested with the constant displacement in gaseous hydrogen are discussed and their significance is analyzed considering the material performance measured under rising displacement tests in gaseous hydrogen.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Research progress on zirconium alloys: applications, development trend, and degradation mechanism in nuclear environment

25. Dezember 2024

Bright O. Okonkwo, Zimin Li, Li Li, Jianqiu Wang, En-Hou Han

PDF downloaden

In this paper, the research progress of zirconium (Zr) alloys is critically reviewed from the aspects of application, development status, and degradation mechanism in a nuclear environment. The review focused on the application of Zr alloys in the nuclear industry, which are widely used due to their low thermal neutron absorption, good corrosion resistance, and excellent mechanical properties. However, with the increasing requirements in the chemical and medical fields, the application of Zr alloys in these non-nuclear fields is growing due to their excellent properties like good corrosion resistance and low thermal expansion coefficient, as summarized in this review. Additionally, the degradation mechanisms of Zr alloy exposed to a corrosive environment, i.e., corrosion and hydrogen uptake, and the role of alloying selection in minimizing these two phenomena is considered in this review, based on pretransition kinetics and the loss of oxide protectiveness at transition. This is corroborated by the discussion on alloying elements with beneficial and detrimental effects on the corrosion performance of Zr alloys, as well as elements with contradicting effects on Zr alloys corrosion performance owing to the discrepancies in literature. Overall, this review can be leveraged in future alloy design to further improve Zr alloys corrosion resistance in nuclear applications, thus ultimately improving their integrity.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Exploring the future of metallic implants: a review of biodegradable and non-biodegradable solutions

25. Dezember 2024

Yahya Ahmed, Nestor K. Ankah, Nasirudeen Ogunlakin, Ihsan ulhaq Toor, Wasif Farooq

PDF downloaden

As advancements in medical technology continue to evolve, the demand for innovative implant materials has become increasingly vital for enhancing overall experience of patients. Traditional non-biodegradable implants, while effective, often necessitate removal through invasive and costly surgical interventions, leading to significant clinical challenges. To address these issues, the development of biodegradable materials has gained prominence due to their ability to gradually degrade and be absorbed by the body, presenting a compelling alternative to permanent implants. This review examines both biodegradable and non-biodegradable metallic implants, focusing on key aspects such as biocompatibility, mechanical properties, and degradation kinetics. Furthermore, it explores the applications of these materials across various medical fields, emphasizing their potential to improve patient care. This review aims to bridge the gap between laboratory innovations, clinical practices, and industrial applications by summarizing current research. It offers valuable insights for researchers, clinicians, and industry professionals, contributing to the ongoing dialogue regarding the future of implant technology and advancing the understanding of material selection for diverse medical applications.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Exploring the inhibitive performance of amino-dicarbonitrile derivative for Q235 steel protection in Cl₃CCOOH solution: effect of temperature and synergism with iodide ions

25. Dezember 2024

Kashif Rahmani Ansari, Ambrish Singh, Ismat H. Ali, Abdullah K. Alanazi, Muhammad Younas, Yuanhua Lin

PDF downloaden

The inhibitory performance of amino-dicarbonitrile derivative (ANC) for the protection of Q235 steel corrosion in trichloroacetic acid (Cl 3 CCOOH) solution was investigated using various methods. The surface adsorption of ANC was screened by SEM, AFM, and XPS methods. Based on the data, it can be concluded that ANC effectively inhibits Q235 steel in 0.5 M Cl 3 CCOOH solution, with 94.3 % inhibition efficiency ( η %) at 100 mg/L. The Freundlich model describes how ANC adsorbs on the surface of Q235 steel. Anodic and cathodic reactions are both retarded by ANC, a mixed type inhibitor. The depressed capacitive loop observed is the Nyquist diagram. The double layer capacitance decreases but the charge transfer resistance rises noticeably with the addition of ANC. The AFM and SEM micrographs provide unambiguous confirmation of the effective inhibition of ANC. The XPS result shows that ANC molecules functional groups are attached to the iron atoms.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Advanced titanium implants: combating corrosion and infection with cutting-edge coatings

17. Dezember 2024

Marijana R. Pantović Pavlović, Nenad L. Ignjatović, Senka Gudić, Ante Bilušić, Dragana Mladenović, Ladislav Vrsalović, Miroslav M. Pavlović

PDF downloaden

The presented research investigates the corrosion behavior of commercially pure titanium (cp-Ti) and amorphous calcium phosphate–chitosan (ACP@ChOL) coatings enriched with selenium on titanium in simulated body fluid (SBF). Using potentiodynamic polarization techniques, it was sought to derive essential corrosion parameters – corrosion potential, corrosion current density, breakdown potential, and passivation current. This study pioneers a comparative analysis of the corrosion stability of both samples. SEM/EDS analysis of surfaces pre- and postpotentiodynamic measurements offered insights into morphology and elemental composition. The aim was to elucidate the corrosion mechanism by integrating these techniques. Additionally, spontaneous corrosion behavior over 7 days, monitoring changes in open circuit potential, polarization resistance, and impedance were investigated. Furthermore, the antimicrobial efficacy of ACP@ChOL enriched with Se on titanium was assessed against Escherichia coli , Staphylococcus aureus , and Candida albicans , as well as in vitro release of Se. The presented study extends understanding, offering a unique perspective on the corrosion behavior and antimicrobial attributes of ACP@ChOL coatings enriched with Se on titanium. This composite material exhibits promise for medical applications, presenting an innovative avenue for addressing corrosion concerns and potentially reducing antibiotic reliance.
Erfordert eine Authentifizierung Nicht lizenziert
Lizenziert

Prediction of short- and long-term atmospheric corrosion in the changing low pollution climate for inland and coastal areas

9. Dezember 2024

Yikun Cai, Yu Zhao, Qian Chen, Xiaobing Ma, Songhua Hao, Kun Zhou

PDF downloaden

This paper studies the impact of the changing climate on atmospheric corrosion loss in the future low pollution environment. Two climate change scenarios (SSP1-2.6 and SSP5-8.5) are studied and they reveal a warmer environment with decreasing sulphur dioxide contamination and slightly changed relative humidity and precipitation from 2010 to 2100. As a consequence, environment corrosivity is both enhanced by increased time-of-wetness and weakened by decreased sulphur dioxide deposition rate. To consider the low pollution environment in the future changing climate, a relative error minimized short-term corrosion model and a re-scaled power-linear long-term corrosion model are proposed. Corrosion loss evaluation results show that, on the overall scale which is mainly representative of remote rural areas, first-year corrosion loss C of different metals under the two SSPs has different trends. On the regional scale of urban and marine areas with high SO 2 or Cl − levels, C will decrease continuously under both SSPs for all three metals. The long-term corrosion loss will also decrease as the environment continues to be less and less corrosive.

Special Issue: Environmentally-Assisted Cracking; Issue Editors: N.J. Henry Holroyd, Fritz Friedersdorf, Mehdi Amiri, Asuri K. Vasudevan and Ronald M. Latanision

Special issue: Stress-assisted corrosion damage / Issue editors: A.K. Vasudevan, N.J. Henry Holroyd and Ronald M. Latanision

Special issue: Environmental degradation of reinforced concrete structures / Issue editors: Antonio Bossio and Francesco Bellucci

Special issue: Advanced materials for corrosion resistant coatings / Issue editor: Lloyd H. Hihara

Heft 1

Special issue: Recent advances in corrosion science / Issue editors: Masahiro Seo, Hideaki Takahashi and Hiroki Habazaki

Heft 6

Heft 4-5

Special issue: Environment-induced cracking / Issue editors: A.K. Vasudevan, N.J. Henry Holroyd and Ronald M. Latanision

Heft 3

Special issue: Materials for accident tolerant fuels / Issue editor: Raúl B. Rebak

Special issue: Fundamentals of environmentally induced cracking / Issue editors: A. K. Vasudevan, N. J. Henry Holroyd, Neville R. Moody and Ronald M. Latanision

Special Issue: Corrosion in Italy, Ausgabe 5-6 (Nov 2011), S. 177–296

to be implemented...

Heft 0

Heft 43

Heft 42

Heft 41

Heft 40

Heft 39

Heft 38

Heft 37

Heft 36

Heft 35

Heft 34

Heft 33

Heft 32

Heft 31

Heft 30

Heft 29

Heft 28

Heft 27

Heft 26

Heft 25

Heft 24

Heft 23

Heft 22

Heft 21

Heft 20

Heft 19

Heft 18

Heft 17

Heft 16

Heft 15

Heft 14

Heft 13

Heft 12

Heft 11

Heft 10

Heft 9

Heft 8

Heft 7

Die Zeitschrift Corrosion Reviews veröffentlicht Sonder- und Themenhefte, die sich auf wichtige und neu aufkommende Themen im Bereich der Forschung konzentrieren. Die Zeitschrift hat ein strenges Verfahren eingeführt, um sicherzustellen, dass alle Manuskripte für Sonderausgaben denselben Qualitätsstandards und Peer-Review-Verfahren unterliegen wie reguläre Manuskripte. Weitere Informationen über die Peer-Review-Politik der Zeitschrift finden Sie in den "Hinweisen für Autoren".

Aktuelle Themenhefte

Band 42 | Heft 5 Special Issue: Environmentally-Assisted Cracking; Issue Editors: N.J. Henry Holroyd, Fritz Friedersdorf, Mehdi Amiri, Asuri K. Vasudevan and Ronald M. Latanision

Journal Impact Factor	3.2	2024, Journal Citation Reports (Clarivate, 2025)
5-year Journal Impact Factor	4.2	2024, Journal Citation Reports (Clarivate, 2025)
Journal Citation Indicator	0.35	2024, Journal Citation Reports (Clarivate, 2025)
CiteScore	5.4	2024, Scopus (Elsevier B.V., 2025)
SCImago Journal Rank	0.615	2024, SJR (Scimago Lab, 2025; Data Source: Scopus)
Source Normalized Impact per Paper	1.075	2024, CWTS Journal Indicators (CWTS B.V., 2025; Data Source: Scopus)

Weitere Informationen über Zeitschriftenmetriken

Submission
You can easily submit your manuscript online. Simply go to https://mc.manuscriptcentral.com/corrosrev and you will be guided through the whole peer-reviewing and publishing process.

Your benefits of publishing with us

Open access publication (2025 onwards)
Research freely available for all to read and download
Authors retain copyright – articles published under the Creative Commons Attribution (CC-BY-4.0) License
Easy-to-use online submission, peer review, and publication system
Color figure publication free of charge
Short turnaround times
Every article easily discoverable because of Search Engine Optimization (SEO) and comprehensive abstracting and indexing services
Secure archiving by De Gruyter and the independent archiving service Portico

Submission process

Submission of your paper via our submission management tool following the Instructions_for_Authors (you will be guided through every step of the submission process)
A decision on your paper is intended within five weeks

Please note

Manuscripts must be written in clear and concise English
If you have any general questions please visit our FAQ page for authors
For more detailed information please contact the Corrosion Reviews Editorial Office corros.rev.editorial@degruyter.com

We look forward to receiving your manuscript!

Open Access

Corrosion Reviews will become an open access journal from 2025 onwards. All submissions made to the journal after the 1^st November 2024 will be published open access under a CC-BY 4.0 license and will be subject to an article processing charge (APC), if they are accepted for publication. The current APC is €1500. For further information on APCs and the journal’s waiver policy please see the Corrosion Reviews APC policy document.

Editors-in-Chief
Raúl B. Rebak, GE Global Research, Schenectady, NY, USA
Martín A. Rodríguez, National Atomic Energy Commission of Argentina, Buenos Aires, Argentina

International Editorial Board
Carmen Andrade, International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain
Francesco Bellucci, University of Naples Federico II, Naples, Italy
Neal Berke, Tourney Consulting Group LLC, Kalamazoo, MI, USA
Nick Birbilis, Deakin University, Geelong, Australia
Bai Cui, University of Nebraska, Lincoln, NE, USA
Noam Eliaz, Tel Aviv University, Tel Aviv, Israel
Gerald S. Frankel, The Ohio State University, Columbus, OH, USA
Hiroki Habazaki, Hokkaido University, Sapporo, Japan
Hannu E. Hänninen, Aalto University, Aalto, Finland
Lloyd Hihara, University of Hawai'i, Honolulu, HI, USA
Mariano A. Kappes, Comisión Nacional de Energía Atómica, Buenos Aires, Argentina
Robert G. Kelly, University of Virginia, Charlottesville, VA, USA
Ronald M. Latanision, Massachusetts Institute of Technology, Cambridge, MA, USA
Philippe Marcus, Chimie ParisTech, Paris, France
Kamachi Mudali, Homi Bhabha National Institute, Kalpakkam, India
R. Winston Revie, Natural Resources Canada, Ottawa, Canada
Sannakaisa Virtanen, FAU Erlangen-Nürnberg, Erlangen, Germany

Editorial Office
Gunda Stöber
De Gruyter Brill
Genthiner Str. 13
10785 Berlin, Germany
Tel. +49-30-26005-279
E-mail: corros.rev.editorial@degruyter.com

Corrosion Reviews ist in den folgenden Services indiziert:

Baidu Scholar
Cabells Journalytics
Chemical Abstracts Service (CAS) - CAplus
Chemical Abstracts Service (CAS) - SciFinder
CNKI Scholar (China National Knowledge Infrastructure)
CNPIEC - cnpLINKer
Dimensions
EBSCO (relevant databases)
EBSCO Discovery Service
Ei Compendex
Engineering Village
Fluidex
Genamics JournalSeek
Google Scholar
Inspec
Japan Science and Technology Agency (JST)
J-Gate
Journal Citation Reports/Science Edition
JournalGuide
Naver Academic
Naviga (Softweco)
Polymer Library
Primo Central (ExLibris)
ProQuest (relevant databases)
Publons
QOAM (Quality Open Access Market)
ReadCube
Reaxys
ScienceON (Korea Institute of Science and Technology Information)
Scilit
SCImago (SJR)
SCOPUS
Semantic Scholar
Sherpa/RoMEO
Summon (ProQuest)
TDNet
TEMA Technik und Management
Ulrich's Periodicals Directory/ulrichsweb
WanFang Data
Web of Science - Science Citation Index Expanded
WorldCat (OCLC)
X-MOL
Yewno Discover

Zeitschriften Informationen

Weitere Informationen

eISSN:

2191-0316

Sprache:

Englisch

Verlag:

De Gruyter

Weitere Informationen

Erstveröffentlichung:

1. September 1987

Erscheinungsweise:

6 Hefte pro Jahr

eISSN: 2191-0316

Zielgruppe(n) für diese Zeitschrift

Researchers in the field of corrosion science and engineering and practitioners who wish to remain familiar with current understanding

Creative Commons

BY 4.0

Corrosion Reviews

Über diese Zeitschrift

Ihre Vorteile

Geschichte

Zusatzmaterial

Fachgebiete

Corrosion Reviews

Übersicht

Über diese Zeitschrift

Ihre Vorteile

Geschichte

Ahead-of-Publication / Just-Accepted

Ausgaben

Themenhefte

Metriken

Einreichen

Editorial

Abstracting und Indexing

Zusatzmaterial

Zusatzmaterial

Fachgebiete

Fachgebiete

Externe Links

Bibliographische Daten