Startseite Influence of dissolved gas molecules on the size recovery kinetics of cold-rolled BPA-PC
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Influence of dissolved gas molecules on the size recovery kinetics of cold-rolled BPA-PC

  • John Tarasewich , Pavel Pekarski und Reiner Kirchheim EMAIL logo
Veröffentlicht/Copyright: 14. Februar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 95 Heft 6

Abstract

Besides annealing, plastic strain in a polymer can also be released partly during the sorption of a small molecule like CO2 as reported for the first time in this study. The corresponding size recovery is measured for the glassy polymer Bisphenol-A-polycarbonate in situ in a dilatometer. The plastic strain was introduced into the polymer by cold rolling with a 17% reduction in cross-section and it was observed that the strain relaxation is anisotropic, i. e., being the largest in the rolling direction.

Keywords: Strain relaxation; Shape recovery; Polymers; Gas absorption

Dedicated to Professor Dr. Peter Neumann on the occasion of his 65th birthday

Prof. Dr. Reiner Kirchheim Institut für Materialphysik, Universität Göttingen Tammannstr. 1, D-37077 Göttingen, Germany Tel.: +49 551 39 5002 Fax: +49 551 39 5000

  1. We wish to thank J. Bohlen, O. Hölck, A. Pundt and H.-G. Brion for interesting discussions. We are grateful for financial support provided by the Deutsche Forschungsgemeinschaft (SFB 602, TP B7).

References

[1] O.B. Salamatina, G.W.H. Höhne, S.N. Rudnev, E.F. Oleinik: Thermochimica Acta 247 (1994) 1.10.1016/0040-6031(94)80110-XSuche in Google Scholar

[2] N. Sun, Z. Yuan, D. Shen: J. Macromol. Sci. – Phys. B 39 (2000) 397.10.1081/MB-100100394Suche in Google Scholar

[3] P. Gotthardt, A. Grüger, H.-G. Brion, R. Plaetschke, R. Kirchheim: Macromolecules 30 (1997) 8058.10.1021/ma9708252Suche in Google Scholar

[4] J. Ulrich, H.-G. Brion, R. Kirchheim: Polymer 40 (1999) 1807.10.1016/S0032-3861(98)00391-7Suche in Google Scholar

[5] A. Grüger, P. Gotthardt, M. Pönitsch, H.-G. Brion, R. Kirchheim: J. Polyymer Sci. B 36 (1998) 483.10.1002/(SICI)1099-0488(199802)36:3<483::AID-POLB11>3.0.CO;2-CSuche in Google Scholar

[6] W.J. Koros, A.H. Chan, D.R. Paul: J. Membrane Sci. 2 (1977) 165.10.1016/S0376-7388(00)83242-1Suche in Google Scholar

[7] J. Hampe: Diploma Thesis (in German), Institut für Materialphysik, Göttingen (1997).Suche in Google Scholar

[8] P. Pekarski, J. Hampe, I. Böhm, H.-G. Brion, R. Kirchheim: Macromolecules 33 (2000) 2192.10.1021/ma990642aSuche in Google Scholar

[9] J. Bohlen, J. Wolf, R. Kirchheim: Macromolecules 32 (1999) 3766.10.1021/ma980164oSuche in Google Scholar
Received: 2004-01-19
Accepted: 2004-02-24
Published Online: 2022-02-14

© 2004 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles Basic
  5. Thermally assisted motion of dislocations in solid solution-strengthened fcc alloys and the concept of “stress equivalence”
  6. From single to collective dislocation glide instabilities: A hierarchy of scales, embracing the Neumann strain bursts
  7. Geometry and surface state effects on the mechanical response of Au nanostructures
  8. Microstructural evolution and its effect on the mechanical properties of Cu–Ag microcomposites
  9. Deformation behaviour of strontium titanate between room temperature and 1800 K under ambient pressure
  10. The deformation response of ultra-thin polymer films on steel sheet in a tensile straining test: the role of slip bands emerging at the polymer/metal interface
  11. Influence of dissolved gas molecules on the size recovery kinetics of cold-rolled BPA-PC
  12. Comparison between Monte Carlo and Cluster Variation method calculations in the BCC Fe–Al system including tetrahedron interactions
  13. Experimental study and Cluster Variation modelling of the A2/B2 equilibria at the titanium-rich side of the Ti–Fe system
  14. Phases and phase equilibria in the Fe–Al–Zr system
  15. On the plate-like τ-phase formation in MnAl–C alloys
  16. Articles Applied
  17. The grain boundary hardness in austenitic stainless steels studied by nanoindentations
  18. The effect of grain size on the mechanical properties of nanonickel examined by nanoindentation
  19. Microstructures and mechanical properties of V–V3Si eutectic composites
  20. Grain boundary characterization and grain size measurement in an ultrafine-grained steel
  21. On the determination of the volume fraction of Ni4Ti3 precipitates in binary Ni-rich NiTi shape memory alloys
  22. Mechanical properties of NiAl–Cr alloys in relation to microstructure and atomic defects
  23. Characterization of the cyclic deformation behaviour and fatigue crack initiation on titanium in physiological media by electrochemical techniques
  24. Effect of prestraining on high-temperature fatigue behaviour of two Ni-base superalloys
  25. Influence of surface defects and edge geometry on the bending strength of slip-cast ZrO2 micro-specimens
  26. Tensile failure in a superplastic alumina
  27. Notifications/Mitteilungen
  28. Personal/Personelles
  29. Conferences/Konferenzen
https://doi.org/10.1515/ijmr-2004-0093
Schlagwörter für diesen Artikel
Strain relaxation; Shape recovery; Polymers; Gas absorption

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Editorial
  4. Articles Basic
  5. Thermally assisted motion of dislocations in solid solution-strengthened fcc alloys and the concept of “stress equivalence”
  6. From single to collective dislocation glide instabilities: A hierarchy of scales, embracing the Neumann strain bursts
  7. Geometry and surface state effects on the mechanical response of Au nanostructures
  8. Microstructural evolution and its effect on the mechanical properties of Cu–Ag microcomposites
  9. Deformation behaviour of strontium titanate between room temperature and 1800 K under ambient pressure
  10. The deformation response of ultra-thin polymer films on steel sheet in a tensile straining test: the role of slip bands emerging at the polymer/metal interface
  11. Influence of dissolved gas molecules on the size recovery kinetics of cold-rolled BPA-PC
  12. Comparison between Monte Carlo and Cluster Variation method calculations in the BCC Fe–Al system including tetrahedron interactions
  13. Experimental study and Cluster Variation modelling of the A2/B2 equilibria at the titanium-rich side of the Ti–Fe system
  14. Phases and phase equilibria in the Fe–Al–Zr system
  15. On the plate-like τ-phase formation in MnAl–C alloys
  16. Articles Applied
  17. The grain boundary hardness in austenitic stainless steels studied by nanoindentations
  18. The effect of grain size on the mechanical properties of nanonickel examined by nanoindentation
  19. Microstructures and mechanical properties of V–V3Si eutectic composites
  20. Grain boundary characterization and grain size measurement in an ultrafine-grained steel
  21. On the determination of the volume fraction of Ni4Ti3 precipitates in binary Ni-rich NiTi shape memory alloys
  22. Mechanical properties of NiAl–Cr alloys in relation to microstructure and atomic defects
  23. Characterization of the cyclic deformation behaviour and fatigue crack initiation on titanium in physiological media by electrochemical techniques
  24. Effect of prestraining on high-temperature fatigue behaviour of two Ni-base superalloys
  25. Influence of surface defects and edge geometry on the bending strength of slip-cast ZrO2 micro-specimens
  26. Tensile failure in a superplastic alumina
  27. Notifications/Mitteilungen
  28. Personal/Personelles
  29. Conferences/Konferenzen
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 29.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2004-0093/html
Button zum nach oben scrollen