Startseite Insulation properties of bricks made with cotton and textile ash wastes
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Insulation properties of bricks made with cotton and textile ash wastes

  • Hanifi Binici , Remzi Gemci , Orhan Aksogan und Hasan Kaplan
Veröffentlicht/Copyright: 18. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 7

Abstract

Huge amounts of cotton and textile ash waste are disposed of by countries all over the world. The majority of cotton wastes and textile ash wastes is expelled in such a way as to cause serious environmental problems. The present study involves experimental research investigating the potential use of cotton and textile ash wastes combination for producing a new and lightweight composite building material with good insulation properties. The results showed that the cotton and textile ash waste bricks fulfill the compressive strength and heat conductivity requirements of the ASTM and Turkish Standards. A cotton and textile ash waste brick house has been found to be superior to a concrete brick house for regulating indoor temperatures. The production process can be easily applied in conventional brick plants. The product is a light weight composite which can be used for making bricks and wall and ceiling panels with good insulation properties.

Keywords: Insulation properties; Brick; Cotton and textile ash
∗ Assit. Prof. Dr. Hanifi Binici, Epoka University, Department of Civil Engineering, Tirana, Albania, Fax: +355 42 222 077, Tel.: +355 42 222 117, E-mail:

References

[1] H.M.Algin, P.Turgut: Construction and Building Materials22 (2008) 1074. 10.1016/j.conbuildmat.2007.03.006Suche in Google Scholar

[2] Y.Shao, T.Lefort, S.Moras, D.Rodriguez: Cement Concrete Research30 (2000) 91. 10.1016/S0008-8846(99)00213-6Suche in Google Scholar

[3] I.B.Topcu, M.Canbaz: Cement Concrete Research34 (2004) 267. 10.1016/j.cemconres.2003.07.003Suche in Google Scholar

[4] A.Shayan: Cement Concrete Research34 (2004) 81. 10.1016/S0008-8846(03)00251-5Suche in Google Scholar

[5] C.Shi, Y.Wu, C.Riefler, H.Wang: Cement Concrete Research35 (2005) 987. 10.1016/j.cemconres.2004.05.015Suche in Google Scholar

[6] V.Corinaldesi, G.Gnappi, G.Moriconi, A.Montenero: Waste Management25 (2005) 197. 10.1016/j.wasman.2004.12.009PMid:15737718Suche in Google Scholar

[7] F.F.Aspiras, J.R.Manalo: J Mater Process Technology48 (1995) 379. 10.1016/0924-0136(94)01672-NSuche in Google Scholar

[8] P.Soroushian, J.Plasencia, S.Ravanbakhsh: ACI Mater J.23 (2003) 203.Suche in Google Scholar

[9] J.Balasubramanian, P.C.Sabumon, J.U.Lazar, R.Ilangovan: J Mater Process Technology48 (1995) 379. 10.1016/0924-0136(94)01672-NSuche in Google Scholar

[10] B.Ahmadi, W.Al-Khaja: Conservation Recycle32 (2001) 105. 10.1016/S0921-3449(01)00051-9Suche in Google Scholar

[11] S.B.Park, B.C.Lee, J.H.Kim: Cement Concrete Research34 (2004) 2181.10.1016/j.cemconres.2004.02.006Suche in Google Scholar

[12] A.U.Elinwa, Y.A.Mahmood: Cement Concrete Composite24 (2002) 219. 10.1016/S0958-9465(01)00039-7Suche in Google Scholar

[13] F.F.Udoeyo, P.U.Dashibil: ASCE.14 (2002) 173.Suche in Google Scholar

[14] G.Li, Y.Yu, Z.Zhao, J.Li, C.Li: Cement Concrete Research33 (2003) 43. 10.1016/S0008-8846(02)00915-8Suche in Google Scholar

[15] H.Binici, O.Aksogan, M.N.Bodur, E.Akca, S.Kapur: Construction and Building Materials21 (2007) 901. 10.1016/j.conbuildmat.2005.11.004Suche in Google Scholar

[16] BS 6073, Part 1, precast concrete masonry units, Specification for precast concrete masonry units, British Standards Institution.Suche in Google Scholar

[17] ASTM C 67-03, Standard test methods for sampling and testing Brick and structural clay tile. Philadelphia, PA, American Society for Testing and Materials.Suche in Google Scholar

[18] M.J. Al Khawaja M.J.: Applied Thermal Engineering24 (2004) 2601.10.1016/j.applthermaleng.2004.03.019Suche in Google Scholar

[19] ASTM C 67-03, Standard test methods for sampling and testing brick and structural clay tile. Philadelphia, PA, American Society for Testing and Materials.Suche in Google Scholar

[20] BS 6073, Part 1, precast concrete masonry units, Specification for precast concrete masonry units. British Standards Institution.Suche in Google Scholar

[21] A.Ozdemir: Geol Eng.26 (2002) 19.Suche in Google Scholar

Received: 2009-2-24
Accepted: 2010-4-28
Published Online: 2013-05-18
Published in Print: 2010-07-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
https://doi.org/10.3139/146.110348
Schlagwörter für diesen Artikel
Insulation properties; Brick; Cotton and textile ash

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 28.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110348/html?lang=de
Button zum nach oben scrollen