Microstructure and mechanical properties of Fe3Al–TiC composites
-
Laixue Pang
Abstract
TiC particle reinforced Fe3Al composites were produced with varying volume fraction of TiC powders. The effect of the TiC fractions and distribution on the properties of the composites was investigated. The composite containing 30 vol.% TiC had hardness and bending strength values of 86 HRA and 1340 MPa, which were 10% and 57% greater than those of the unreinforced Fe3Al, respectively. Microscopic examination of the composite showed TiC particles with grain size ranging from 50 to 100 nm were homogeneously dispersed in Fe3Al matrix, the larger TiC particles with sub-micrometer size were mainly located at grain boundaries and the smaller ones were within matrix grains.
References
[1] N.S.Stoloff: Mater. Sci. Eng A258 (1998) 1. 10.1016/S0921-5093(98)00909-5Suche in Google Scholar
[2] S.C.Deevi, V.K.Sika: Intermetallics4 (1996) 357. 10.1016/0966-9795(95)00056-9Suche in Google Scholar
[3] S.C.Deevi, V.K.Sika, C.T.Liu: Prog. Mater. Sci.42 (1997) 177. 10.1016/S0079-6425(97)00014-5Suche in Google Scholar
[4] D.G.Morris, M.A.Morris-Munoz: Intermetallics7 (1999) 1121. 10.1016/S0966-9795(99)00038-2Suche in Google Scholar
[5] O.Dariusz: J. Mater. Sci.39 (2004) 5169. 10.1023/B:JMSC.0000039204.08971.26Suche in Google Scholar
[6] B.G.Park, S.H.Ko, Y.H.Park, J.H.Lee: Intermetallics14 (2006) 660. 10.1016/j.intermet.2005.10.007Suche in Google Scholar
[7] D.E.Alman, J.A.Hawk, J.H.Tylczak, C.P.Dogan, R.D.Wison: Wear251 (2001) 875. 10.1016/S0043-1648(01)00745-1Suche in Google Scholar
[8] M.Krasnowski, T.Kulik: Scripta. Mater.48 (2003) 1489. 10.1016/S1359-6462(03)00112-XSuche in Google Scholar
[9] J.H.Schneibel, C.A.Carmichael, E.D.Specht, R.Subramanian: Intermetallics5 (1997) 61. 10.1016/S0966-9795(96)00066-0Suche in Google Scholar
[10] R.Subramanian, J.H.Schneibel: Mater. Sci. Eng. A239-240 (1997) 633. 10.1016/S0921-5093(97)00641-2Suche in Google Scholar
[11] S.H.Ko, S.Hanada: Intermetallics7 (1999) 947. 10.1016/S0966-9795(99)00002-3Suche in Google Scholar
[12] W.J.Lu, Z.F.Yang, D.Zhang, X.N.Zhang, R.J.Wu, T.Sakata, H.Mori: Int. J. Mat. Res.3 (2002) 219.Suche in Google Scholar
[13] Y.C.Kang, S.L.Chan: Mater. Chem. Phys.85 (2004) 438. 10.1016/j.matchemphys.2004.02.002Suche in Google Scholar
[14] D.V.Kudashov, H.Baum, U.Martin, M.Heilmaier, H.Oettel: Mater. Sci. Eng. A387–389 (2004) 768. 10.1016/j.msea.2004.05.049Suche in Google Scholar
© 2010, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Basic
- Thermodynamic modeling of the Pt–Zr system
- Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
- Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
- Thermophysical properties of liquid tin–bismuth alloys
- A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
- Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
- Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
- Applied
- Microstructure and mechanical properties of Fe3Al–TiC composites
- Study of wear behaviour of ductile iron subjected to two step austempering
- Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
- The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
- Insulation properties of bricks made with cotton and textile ash wastes
- Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
- Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
- Simulation-based study of the compensation coil method applied to ferrite nanometric powders
- DGM News
- Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
Artikel in diesem Heft
- Contents
- Contents
- Basic
- Thermodynamic modeling of the Pt–Zr system
- Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
- Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
- Thermophysical properties of liquid tin–bismuth alloys
- A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
- Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
- Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
- Applied
- Microstructure and mechanical properties of Fe3Al–TiC composites
- Study of wear behaviour of ductile iron subjected to two step austempering
- Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
- The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
- Insulation properties of bricks made with cotton and textile ash wastes
- Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
- Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
- Simulation-based study of the compensation coil method applied to ferrite nanometric powders
- DGM News
- Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
