Contents

Articles in the same Issue

1. Contents
2. Contents
3. Basic
4. Thermodynamic modeling of the Pt–Zr system
5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
7. Thermophysical properties of liquid tin–bismuth alloys
8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
9. Luminescence of Fe-substituted ZnWO₄ powders synthesized by aqueous solution reaction
10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
11. Applied
12. Microstructure and mechanical properties of Fe₃Al–TiC composites
13. Study of wear behaviour of ductile iron subjected to two step austempering
14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
16. Insulation properties of bricks made with cotton and textile ash wastes
17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
20. DGM News
21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek