Startseite Thermophysical properties of liquid tin–bismuth alloys
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Thermophysical properties of liquid tin–bismuth alloys

  • Yuriy Plevachuk , Vasyl Sklyarchuk , Gunter Gerbeth und Sven Eckert
Veröffentlicht/Copyright: 18. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 7

Abstract

Tin–bismuth alloys are under intense consideration as favourable lead-free solders for consumer electronics and telecommunications. The electrical and thermal conductivity, viscosity, surface tension and density were studied in a wide temperature range above the liquidus. The scaling relations have been proposed. A comparison with data available in literature is given.

Keywords: Lead-free alloys; Liquid metal properties; Tin–bismuth
∗ Dr. Yuriy Plevachuk, Ivan Franko National University, Department of Metal Physics, 8 Kyrylo and Mephodiy str., 79005 Lviv, Ukraine, Tel.: +38 032 239 4270, E-mail:

References

[1] M.Abtew, G.Selvaduray: Mater Sci Eng. R27 (2000) 95.10.1016/S0927-796X(00)00010-3Suche in Google Scholar

[2] Lead-Free Solder Project Final Report: NCMS Report 0401RE96 (Ann Arbor, MI: National Center for Manufacturing Sciences, Aug., 1997).Suche in Google Scholar

[3] F.Hua, Z.Mei, and J.Glazer: Eutectic Sn-Bi as an Alternative to Pb-Free Solders, in Proc. of IEEE Electronic Components and Technology Conference (1998) 277.Suche in Google Scholar

[4] WEEE and RoHS Directives. Official Journal of the European Union, L37 (2003) 19.Suche in Google Scholar

[5] K.-W.Moon, W.J.Boettinger, U.R.Kattner, C.A.Handwerker, D.-J.Lee: J. Electron. Mater.30 (2001) 45. 10.1007/s11664-001-0213-xSuche in Google Scholar

[6] A.Roll, P.Basu: Z.Metallkd.54 (9) (1963) 511.Suche in Google Scholar

[7] X-F.Li, F.Zu, H.Ding, J.Yu, L.Liu, Y.Xi: Phys. Lett. A354 (2006) 325. 10.1016/j.physleta.2006.01.058Suche in Google Scholar

[8] J.D.Verhoeven and F.Y.Lieu: Acta Metall.13 (1965) 927. 10.1016/0001-6160(65)90086-6Suche in Google Scholar

[9] J.W.Taylor: Acta Metall.4 (1956) 460. 10.1016/0001-6160(56)90042-6Suche in Google Scholar

[10] Yu.Plevachuk, V.Sklyarchuk: Meas. Sci. Technol.12 (2001) 23. 10.1088/0957-0233/12/1/303Suche in Google Scholar

[11] V.Sklyarchuk, Yu.Plevachuk: Meas. Sci. Technol.16 (2005) 467. 10.1088/0957-0233/16/2/019Suche in Google Scholar

[12] S.Mudry, V.Sklyarchuk, A.Yakymovych: J. Phys. Studies.12 (2008) 1601.Suche in Google Scholar

[13] R.Roscoe: Proc. Phys. Soc.72 (1958) 576. 10.1088/0370-1328/72/4/312Suche in Google Scholar

[14] Yu.V.Najdich: Contact phenomena in metallurgical melts, Naukova Dumka, Kyiv (1972).Suche in Google Scholar

[15] J.Lee, A.Kiyose, S.Nakatsuka, M.Nakamoto, T.Tanaka: ISIJ Int.44 (2004) 1793. 10.2355/isijinternational.44.1793Suche in Google Scholar

[16] P.Kozakevitch, in: J.O. M.Bockris, J.L.White, J.D.Mackenzie (Eds.), Physico Chemical Measurements at High Temperatures, Butterworth Sc. Publ., London, 9 (1959) 208.Suche in Google Scholar

[17] Yu.Plevachuk, V.Sklyarchuk, W.Hoyer, I.Kaban: J. Mater. Sci.41 (2006) 4632. 10.1007/s10853-006-0053-4Suche in Google Scholar

[18] V.M.Sklyarchuk, Yu.O.Plevachuk: Inorg. Mater.39 (2003) 811. 10.1023/A:1025017111565Suche in Google Scholar

[19] M.Bestandji: Ph. D. Thesis, University of Metz, France (2000).Suche in Google Scholar

[20] G.T.Dyos, T.Farrell: Electrical Resistivity Handbook, Peter Peregrinus Ltd, London (1992).Suche in Google Scholar

[21] J.M.Ziman: The Physics of Metals. Chapters 5, 6, University Press, Cambridge (1969).Suche in Google Scholar

[22] B.Giordanengo, N.Benazzi, J.Vinkel, J.G.Gasser, L.Roubi: J. Non-Cryst. Solids, 250-252 (1999) 377. 10.1016/S0022-3093(99)00268-9Suche in Google Scholar

[23] R.P.Chhabra, D.K.Sheth: Z.Metallkd.81 (4) (1990) 264.Suche in Google Scholar

[24] Y.Wang, Y.Wu, X.Bian. Chin. Phys. Lett., 24 (7) (2007) 2028. 10.1088/0256-307X/24/7/067Suche in Google Scholar

[25] L.Wang, X.Bian, J.Liu: Phys. Lett. A326 (2004) 429 and 328 (2004) 241.10.1016/j.physleta.2004.04.052Suche in Google Scholar

[26] L.Gvozdyova, A.Lubimov: Chernaja Metallurgiya7 (1965) 16.Suche in Google Scholar

[27] L.Gvozdyova, A.Lubimov: Ukr. Fiz. Journal12 (2) (1967) 207.Suche in Google Scholar

[28] Y.Dutchak, M.Klym, O.Mykolaychuk: Ukr. Phys. Journal7 (2) (1962) 217.Suche in Google Scholar

[29] N.E.Bodakin, B.A.Baum, G.V.Tyagunov: Izv. Vyssh. Uchebn. Zaved., Chern. Metall.7 (1978) 9.Suche in Google Scholar

[30] E.G.Shvidkovski: Some problems of the viscosity of fused metals, State Publishing House for Technical and Theoretical Literature, Moscow (1955).Suche in Google Scholar

[31] Yu.Plevachuk, V.Sklyarchuk, A.Yakymovych, G.Gerbeth: J. Non-Cryst. Solids.354 (2008) 4443. 10.1016/j.jnoncrysol.2008.06.068Suche in Google Scholar

[32] Z.Moser, W.Gasior, J.Pstrus: J. Electron. Mater.30 (2001) 1104. 10.1007/s11664-001-0136-6Suche in Google Scholar

[33] X.Ibragimov, N.Pokrovskii, P.Pugachevich, V.Semenchenko: Poverkh. Yavlenija Raspl. Vozn. Tverd. Faz., Nalchik (1965) 269.Suche in Google Scholar

[34] G.Drath, F.Sauerwald: Z. Anorg. Allg. Chem.162 (1927) 301. 10.1002/zaac.19271620128Suche in Google Scholar

[35] B.Predel, A.Emam: Mater. Sci. Eng.4 (1969) 287. 10.1016/0025-5416(69)90005-6Suche in Google Scholar

[36] L.Wang, A.Xian: J. Electron. Mater.34 (2005) 1414. 10.1007/s11664-005-0199-xSuche in Google Scholar

Received: 2009-2-25
Accepted: 2010-4-30
Published Online: 2013-05-18
Published in Print: 2010-07-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
https://doi.org/10.3139/146.110357
Schlagwörter für diesen Artikel
Lead-free alloys; Liquid metal properties; Tin–bismuth

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 28.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110357/html
Button zum nach oben scrollen