Home Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
Article
Licensed
Unlicensed Requires Authentication

Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets

  • R. Ravindran , K. Manonmani and R. Narayanasamy
Published/Copyright: May 18, 2013
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 101 Issue 7

Abstract

In this work, forming and fracture limit diagrams have been experimentally evaluated for aluminium 5052 alloy sheet annealed at four different temperatures namely 200°C, 250°C, 300°C and 350°C. With the help of these diagrams, the safe range which avoids necking and fracture during forming of aluminium 5052 alloy sheets was examined and the effect of annealing temperature on this range and other parameters namely microstructure, tensile properties and formability parameters were studied. The forming limit diagrams of aluminium 5052 alloy sheets annealed under different temperatures were also examined with respect to the crystallographic texture point of view. The crystallographic textures were then correlated with normal anisotropy of the sheet metal. It was found that the formability of aluminium 5052 alloy annealed at 350°C possessed good formability, optimal texture and high normal anisotropy value.

Keywords: Forming; Fracture; Annealing; Crystallographic texture
∗ Prof. R. Ravindran, Department of Mechanical Engineering, Dr. Mahalingam College of Engineering & Technology, Udumalai road, Pollachi, Tamil Nadu, India-642 003, Tel.: +91 422 2604567, E-mail:

References

[1] R.Nikhil, T.Raghuram, B.Vamsi Krishna, K.Prasad Rao, P.Venugopal: Mater. Sci. Eng. A398 (2005) 246. 10.1016/j.msea.2005.03.026Search in Google Scholar

[2] H.Takuda, N.Yamazaki, N.Hatta, S.Kikuchi: J. Mater. Sci.30 (1995) 957. 10.1007/BF01178430Search in Google Scholar

[3] D.Ravi Kumar, K.Swaminathan: Mater. Sci. Technol.15 (1999) 1241.Search in Google Scholar

[4] R.Narayanasamy, R.Sowerby: J. Mater. Proc. Tech.39 (1993) 43. 10.1016/0924-0136(93)90007-SSearch in Google Scholar

[5] R.Narayanasamy, R.Sowerby: J. Mater. Proc. Tech.41 (1994) 275. 10.1016/0924-0136(94)90166-XSearch in Google Scholar

[6] M.Karima, R.Sowerby: Report No.144, Faculty of Engineering, McMaster University, Hamilton, Ontario, Canada (1980).Search in Google Scholar

[7] S.Di, P.F.Thomson: J. Testing Eval. JTEVA25 (1997) 74.10.1520/JTE11327JSearch in Google Scholar

[8] J.Wang, X.Wu, P.F.Thomson, A.Flitman: J. Mater. Proc. Tech.105 (2000) 215. 10.1016/S0924-0136(00)00534-3Search in Google Scholar

[9] K.Youngsuk, S.Youngjin: J. Mater. Proc. Tech.97 (2000) 88. 10.1016/S0924-0136(99)00346-5Search in Google Scholar

[10] S.P.Keeler: Sheet Met. Ind.42 (1965) 683.Search in Google Scholar

[11] G.M.Goodwin: Metall. Italiana60 (1968) 764.Search in Google Scholar

[12] S.S.Hecker: Sheet Met. Ind.53 (1975) 671.10.2307/2576512Search in Google Scholar

[13] M.C.Butuc, J.J.Gracio, A. Baratada Rocha: J. Mater. Process. Tech.142 (2003) 714. 10.1016/S0924-0136(03)00813-6Search in Google Scholar

[14] A.F.Avila, E.L.S.Vieira: J. Mater. Process. Technol.141 (2003) 101. 10.1016/S0924-0136(03)00162-6Search in Google Scholar

[15] C.L.Chow, M.Jie: Int. J. Mech. Sci.46 (2004) 99. 10.1016/j.ijmecsci.2004.02.003Search in Google Scholar

[16] R.Narayanasamy, Ph.D. Thesis, Drawability of sheet metals through Conical and Tractrix dies, Regional Engineering College, Tiruchirappalli-620 015, India (1992).Search in Google Scholar

[17] L.S.Toth, J.Hirsch, P.Van Houtte: Int. J. Mech. Sci.38 (1996) 1117. 10.1016/0020-7403(95)00110-7Search in Google Scholar

[18] P.D.Wu, S.R.MacEwen, D.J.Lloyd, K.W.Neale: Mater. Sci. Eng. A364 (2004) 182. 10.1016/j.msea.2003.08.020Search in Google Scholar

[19] B.Bacroix, Th.Chauveau, J.Ferreira Duarte, A. Baratade Rocha, J.Gracio: The respective influences of grain size and texture on the formability of a 1050 aluminium alloy.Search in Google Scholar

[20] M.Y.Huh, S.Y.Cho, O.Engler: Randomization of the annealing texture in aluminium 5182 sheet by cross-rolling, Mater. Sci. Eng. A315 (2001) 35. 10.1016/S0921-5093(01)01207-2Search in Google Scholar

[21] O.Engler, J.Hirsch: Mater. Sci. Eng. A336 (2002) 49.Search in Google Scholar

[22] R.Narayanasamy, C.Sathiyanarayanan: Report of FLD on IF steels submitted to TISCO, National Institute of Technology, Tiruchirappalli, Tamilnadu, India2004.Search in Google Scholar

Received: 2008-9-25
Accepted: 2010-4-28
Published Online: 2013-05-18
Published in Print: 2010-07-01

© 2010, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
https://doi.org/10.3139/146.110347
Keywords for this article
Forming; Fracture; Annealing; Crystallographic texture

Articles in the same Issue

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 28.10.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.110347/html
Scroll to top button