Abstract
With the advances of green chemistry and nanoscience, the synthesis of green, homogenous bio-based waterborne polyurethane (WPU) dispersions with high performance have gained great attention. The presented chapter deals with the recent synthesis of waterborne polyurethane with the biomass, especially the vegetable oils including castor oil, soybean oil, sunflower oil, linseed oil, jatropha oil, and palm oil, etc. Meanwhile, the other biomasses, such as cellulose, starch, lignin, chitosan, etc., have also been illustrated with the significant application in preparing polyurethane dispersions. The idea was to highlight the main vegetable oil-based polyols, and the isocyanate, diols as chain extenders, which have supplied a class of raw materials in WPU. The conversion of biomasses into active chemical agents, which can be used in synthesis of WPU, has been discussed in detail. The main mechanisms and methods are also presented. It is suggested that the epoxide ring opening method is still the main route to transform vegetable oils to polyols. Furthermore, the nonisocyanate WPU may be one of the main trends for development of WPU using biomasses, especially the abundant vegetable oils.
Funding source: National Natural Science Foundation of China
Award Identifier / Grant number: 51802259
Funding source: Natural Science Foundation of Shaanxi
Award Identifier / Grant number: 2019JQ-510
Funding source: Xi’an Beilin District Programs for Science and Technology Plan
Award Identifier / Grant number: 201805037YD15CG21(18), GX1913
Funding source: Promotion Program for Youth of Shaanxi University Science and Technology Association
Award Identifier / Grant number: 20190415
Funding source: Fund of Key laboratory of Processing and Quality Evaluation Technology of Green Plastics of China National Light Industry Council
Award Identifier / Grant number: PQETGP2019003
Funding source: Ph.D. Start-Up Fund Project
Award Identifier / Grant number: 108-451118001
Funding source: Xi’an University of Technology
-
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: The authors acknowledge the financial support provided by the National Natural Science Foundation of China [Grant No. 51802259], the Natural Science Foundation of Shaanxi [Grant No. 2019JQ-510], Xi’an and Xi’an Beilin District Programs for Science and Technology Plan [Grant No. 201805037YD15CG21(18) and GX1913], the Promotion Program for Youth of Shaanxi University Science and Technology Association [Grant No. 20190415], Fund of Key laboratory of Processing and Quality Evaluation Technology of Green Plastics of China National Light Industry Council [Grant No. PQETGP2019003], the Ph.D. Start-Up Fund Project [Grant No. 108-451118001] of Xi’an University of Technology.
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
1. Zhou, X, Hao, YY, He, XY, Zhou, D, Xie, L, Liu, SL, et al.. Protean morphology of waterborne polyurethane dispersion: an overview of nanoparticles from sphere to irregular elongated shape. Prog Org Coating 2020;146:105742.10.1016/j.porgcoat.2020.105742Suche in Google Scholar
2. Urban, D, Takamura, K. Polymer Dispersions and Their Industrial Applications. Weinheim: Wiley-VCH; 2002.10.1002/3527600582Suche in Google Scholar
3. Xia, Y, Larock, RC. Vegetable oil-based polymeric materials: synthesis, properties, and applications. Green Chem 2010;12:1893–909.10.1039/c0gc00264jSuche in Google Scholar
4. Lu, YS, Larock, RC. New hybrid latexes from a soybean oil-based waterborne polyurethane and acrylics via emulsion polymerization. Biomacromolecules 2007;8:3108–14.10.1021/bm700522zSuche in Google Scholar
5. Zhou, X, Fang, C, Yu, Q. Synthesis of polyurethane dispersions in nanoparticles and their properties that depend on aging time. J Dispersion Sci Technol 2015;36:1178–89.10.1080/01932691.2014.961195Suche in Google Scholar
6. Zhou, X, Fang, C, Chen, J, Li, S, Li, Y, Lei, W. Correlation of raw materials and waterborne polyurethane properties by sequence similarity analysis. J Mater Sci Technol 2016;32:687–94.10.1016/j.jmst.2016.02.006Suche in Google Scholar
7. Zhou, X, Fang, C, Lei, W, Su, J, Li, L, Li, Y. Thermal and crystalline properties of waterborne polyurethane by in situ water reaction process and their potential application as biomaterial. Prog Org Coating 2017;104:1–10.10.1016/j.porgcoat.2016.12.001Suche in Google Scholar
8. Zhou, X, Fang, C, He, X, Wang, Y, Yang, J, Yang, L, et al.. The morphology and structure of natural clays from Yangtze River and their interactions with polyurethane elastomer. Compos Appl Sci Manuf 2017;96:46–56.10.1016/j.compositesa.2017.02.009Suche in Google Scholar
9. Zhou, X, Su, J, Wang, C, Fang, C, He, X, Lei, W, et al.. Design, preparation and measurement of protein/CNTs hybrids: a concise review. J Mater Sci Technol 2020;46:74–87.10.1016/j.jmst.2020.01.008Suche in Google Scholar
10. Zhou, X, Deng, J, Fang, C, Yu, R, Lei, W, He, X, et al.. Preparation and characterization of lysozyme@carbon nanotubes/waterborne polyurethane composite and the potential application in printing inks. Prog Org Coating 2020;142:105600.10.1016/j.porgcoat.2020.105600Suche in Google Scholar
11. Zhang, C, Garrison, TF, Madbouly, SA, Kessler, MR. Recent advances in vegetable oil-based polymers and their composites. Prog Polym Sci 2017;71:91–143.10.1016/j.progpolymsci.2016.12.009Suche in Google Scholar
12. Zhang, C, Liang, HY, Liang, DS, Lin, ZR, Chen, Q, Feng, PJ, et al.. Renewable castor-oil-based waterborne polyurethane networks: simultaneously showing high strength, self-healing, processability and tunable multishape memory. Angew Chem Int Ed 2020. https://doi.org/10.1002/anie.202014299.Suche in Google Scholar PubMed
13. Wang, X, Liang, HY, Jiang, JZ, Wang, QW, Luo, Y, Feng, PJ, et al.. A cysteine derivative-enabled ultrafast thiol-ene reaction for scalable synthesis of a fully bio-based internal emulsifier for high-toughness waterborne polyurethanes. Green Chem 2020;22:5722–9.10.1039/D0GC02213FSuche in Google Scholar
14. Zhou, X, Li, Y, Fang, CQ, Li, SJ, Cheng, YL, Lei, WQ, et al.. Recent advances in synthesis of waterborne polyurethane and their application in water-based ink: a review. J Mater Sci Technol 2015;31:708–22.10.1016/j.jmst.2015.03.002Suche in Google Scholar
15. Engels, HW, Pirkl, HG, Albers, R, Albach, RW, Krause, J, Hoffmann, A, et al.. Polyurethanes: versatile materials and sustainable problem solvers for today’s challenges. Angew Chem Int Ed 2013;52:9422–41.10.1002/anie.201302766Suche in Google Scholar
16. Zhou, X, Deng, J, Wang, D, Fang, C, Song, R, Zhang, W, et al.. Growth of polypyrrole conductive and integrated hybrids with lysozyme nanolayer and the thermal properties. Compos Appl Sci Manuf 2020;137:105975.10.1016/j.compositesa.2020.105975Suche in Google Scholar
17. Fang, CQ, Zhou, X, Yu, Q, Liu, SL, Guo, DG, Yu, RE, et al.. Synthesis and characterization of low crystalline waterborne polyurethane for potential application in water-based ink binder. Prog Org Coating 2014;77:61–71.10.1016/j.porgcoat.2013.08.004Suche in Google Scholar
18. Zafar, F, Sharmin, E. Polyurethane: an introduction. Croatia: InTech; 2012.10.5772/51663Suche in Google Scholar
19. Höfer, R, Daute, P, Grützmacher, R, Westfechtel, A. Oleochemical polyols - a new raw material source for polyurethane coatings and floorings. J Coat Technol 1997;69:65–72. https://doi.org/10.1007/BF02696155.Suche in Google Scholar
20. Heinrich, LA. Future opportunities for bio-based adhesives-advantages beyond renewability. Green Chem 2019;21:1866–88.10.1039/C8GC03746ASuche in Google Scholar
21. Noreen, A, Zia, KM, Zuber, M, Tabasum, S, Zahoor, AF. Bio-based polyurethane: an efficient and environment friendly coating systems: a review. Prog Org Coating 2016;91:25–32.10.1016/j.porgcoat.2015.11.018Suche in Google Scholar
22. Desroches, M, Escouvois, M, Auvergne, R, Caillol, S, Boutevin, B. From vegetable oils to polyurethanes: synthetic routes to polyols and main industrial products. Polym Rev 2012;52:38–79.10.1080/15583724.2011.640443Suche in Google Scholar
23. Duer, M, Veis, A. Water brings order. Nat Mater 2013;12:1081–2.10.1038/nmat3822Suche in Google Scholar
24. Lattuada, M, Sandkühler, P, Wu, H, Sefcik, J, Morbidelli, M. Kinetic modeling of aggregation and gel formation in quiescent dispersion of polymer colloids. Macromol Symp 2004;206:307–20.10.1002/masy.200450224Suche in Google Scholar
25. Zhou, X, Fang, CQ, Lei, WQ, Du, J, Huang, T, Li, Y, et al.. Various nanoparticles morphology of polyurethane dispersions controlled by water. Sci Rep 2016;6:34574.10.1038/srep34574Suche in Google Scholar
26. Fu, CQ, Zheng, ZT, Yang, Z, Chen, YW, Shen, L. A fully bio-based waterborne polyurethane dispersion from vegetable oils: from synthesis of precursors by thiol-ene reaction to study of final material. Prog Org Coating 2014;77:53–60.10.1016/j.porgcoat.2013.08.002Suche in Google Scholar
27. Ionescu, M, Petrović, ZS, Wan, X. Ethoxylated soybean polyols for polyurethanes. J Polym Environ 2007;15:237–43.10.1007/s10924-007-0065-4Suche in Google Scholar
28. Daniel, P, Pfister, DP, Xia, Y, Larock, RC. Recent advances in vegetable oil-based polyurethanes. ChemSusChem 2011;4:703–17.10.1002/cssc.201000378Suche in Google Scholar
29. Hormaiztegui, MEV, Aranguren, MI, Mucci, VL. Synthesis and characterization of a waterborne polyurethane made from castor oil and tartaric acid. Eur Polym J 2018;102:151–60.10.1016/j.eurpolymj.2018.03.020Suche in Google Scholar
30. Gurunathan, T, Chung, JS. Physicochemical properties of amino–silane-terminated vegetable oil-based waterborne polyurethane nanocomposites. ACS Sustain Chem Eng 2016;4:4645–53.10.1021/acssuschemeng.6b00768Suche in Google Scholar
31. Liang, HY, Wang, SW, He, H, Wang, MQ, Liu, LX, Lu, JY, et al.. Aqueous anionic polyurethane dispersions from castor oil. Ind Crop Prod 2018;122:182–9.10.1016/j.indcrop.2018.05.079Suche in Google Scholar
32. Luong, ND, Sinh, LH, Minna, M, Jurgen, W, Torsten, W, Matthias, S, et al.. Synthesis and characterization of castor oil-segmented thermoplastic polyurethane with controlled mechanical properties. Eur Polym J 2016;81:129–37.10.1016/j.eurpolymj.2016.05.024Suche in Google Scholar
33. Palaskar, DV, Boyer, A, Cloutet, E, Le Meins, JF, Gadenne, B, Alfos, C, et al.. Original diols from sunflower and ricin oils: synthesis, characterization, and use as polyurethane building blocks. J Polym Sci, Part A: Polym Chem 2012;50:1766–82.10.1002/pola.25944Suche in Google Scholar
34. Zhang, Y, Liu, BY, Huang, KX, Wang, SY, Quirino, RL, Zhang, ZX, et al.. Eco-friendly castor oil-based delivery system with sustained pesticide release and enhanced retention. ACS Appl Mater Interfaces 2020;12:37607–18.10.1021/acsami.0c10620Suche in Google Scholar
35. Zhang, Y, Zhang, WB, Wang, X, Dong, QW, Zeng, XY, Quirino, RL, et al.. Waterborne polyurethanes from castor oil-based polyols for next generation of environmentally-friendly hair-styling agents. Prog Org Coating 2020;142:105588.10.1016/j.porgcoat.2020.105588Suche in Google Scholar
36. Shen, YB, He, JL, Xie, ZX, Zhou, X, Fang, CQ, Zhang, C. Synthesis and characterization of vegetable oil based polyurethanes with tunable thermomechanical performance. Ind Crop Prod 2019;140:111711.10.1016/j.indcrop.2019.111711Suche in Google Scholar
37. Liang, B, Li, RP, Zhang, Q, Yang, ZH, Yuan, T. Synthesis and characterization of a novel tri-functional bio-based methacrylate prepolymer from castor oil and its application in UV-curable coatings. Ind Crop Prod 2019;135:170–8.10.1016/j.indcrop.2019.04.039Suche in Google Scholar
38. Zhao, MH, Wang, YQ, Liu, LX, Liu, LX, Chen, M, Zhang, Q, et al.. Green coatings from renewable modified bentonite and vegetable oil based polyurethane for slow release fertilizers. Polym Compos 2018;39:4355–63.10.1002/pc.24519Suche in Google Scholar
39. Petrovic, Z, Guo, A, Zhang, W. Structure and properties of polyurethanes based on halogenated and nonhalogenated soy-polyols. J Appl Polym Sci 2000;38:4062–9.10.1002/1099-0518(20001115)38:22<4062::AID-POLA60>3.0.CO;2-LSuche in Google Scholar
40. Guo, A, Cho, Y, Petrovic, ZS. Structure and properties of halogenated and nonhalogenated soy-based polyols. J Appl Polym Sci 2000;38:3900–10.10.1002/1099-0518(20001101)38:21<3900::AID-POLA70>3.0.CO;2-ESuche in Google Scholar
41. Ramani, N, Graiver, D, Farminer, KW, Tran, PT, Tran, T. Novel modified fatty acid esters and method of preparation thereof. US patent 0084603, 2010.Suche in Google Scholar
42. Sharma, V, Kundu, PP. Condensation polymers from natural oils. Prog Polym Sci 2008;33:1199–215.10.1016/j.progpolymsci.2008.07.004Suche in Google Scholar
43. Behr, A, Fiene, M, Buß, C, Eilbracht, P. Hydroaminomethylation of fatty acids with primary and secondary amines: a new route to interesting surfactant substrates. Eur J Lipid Sci Technol 2000;102:467–71.10.1002/1438-9312(200008)102:7<467::AID-EJLT467>3.0.CO;2-JSuche in Google Scholar
44. Bantchev, GB, Kenar, JA, Biresaw, G, Han, MG. Free radical addition of butanethiol to vegetable oil double bonds. J Agric Food Chem 2009;57:1282–90.10.1021/jf802774gSuche in Google Scholar
45. Koenig, NH, Swern, D. Organic sulfur derivatives. I. Addition of mercaptoacetic acid to long-chain monounsaturated compounds. J Am Chem Soc 1957;79:362–5.10.1021/ja01559a033Suche in Google Scholar
46. Larock, R, Dong, X, Chung, S, Reddy, C, Ehlers, L. Preparation of conjugated soybean oil and other natural oils and fatty acids by homogeneous transition metal catalysis. J Am Oil Chem Soc 2001;78:447–53.10.1007/s11746-001-0284-1Suche in Google Scholar
47. Gunstone, FD. Chemical reactions of fatty acids with special reference to the carboxyl group. Eur J Lipid Sci Technol 2001;103:307–14.10.1002/1438-9312(200105)103:5<307::AID-EJLT307>3.0.CO;2-DSuche in Google Scholar
48. Zlatanic, A, Petrovic, ZS, Dusek, K. Structure and properties of triolein-based polyurethane networks. Biomarcomolecules 2002;3:1048–56.10.1021/bm020046fSuche in Google Scholar
49. Lyon, C, Garrett, V, Frankel, E. Rigid urethane foams from hydroxymethylated castor oil, safflower oil, oleic safflower oil, and polyol esters of castor acids. J Am Oil Chem Soc 1974;51:331–4.10.1007/BF02632378Suche in Google Scholar
50. Petrovic, Z, Guo, A, Javni, I, Cvetkovic, I, Hong, DP. Polyurethane networks from polyols obtained by hydroformylation of soybean oil. Polym Int 2008;57:275–81.10.1002/pi.2340Suche in Google Scholar
51. Li, ZR, Zhao, YH, Yan, SR, Wang, XK, Kang, MQ, Wang, JW, et al.. Catalytic synthesis of carbonated soybean oil. Catal Lett 2008;123:246–51.10.1007/s10562-008-9414-8Suche in Google Scholar
52. Parzuchowski, PG, Jurczyk-Kowalska, M, Ryszkowska, J, Rokicki, G. Epoxy resin modified with soybean oil containing cyclic carbonate groups. J Appl Polym Sci 2006;102:2904–14.10.1002/app.24795Suche in Google Scholar
53. Lu, Y, Larock, RC. Soybean-oil-based waterborne polyurethane dispersions: effects of polyol functionality and hard segment content on properties. Biomacromolecules 2008;9:3332–40.10.1021/bm801030gSuche in Google Scholar
54. Zhang, C, Li, Y, Chen, R, Kessler, MR. Polyurethanes from solvent-free vegetable oil-based polyols. ACS Sustain Chem Eng 2014;2:2465–76.10.1021/sc500509hSuche in Google Scholar
55. Feng, YC, Liang, HY, Yang, ZM, Yuan, T, Luo, Y, Li, PW, et al.. A solvent-free and scalable method to prepare soybean-oil-based polyols by thiol-ene photo-click reaction and biobased polyurethanes therefrom. ACS Sustain Chem Eng 2017;5:7365–73.10.1021/acssuschemeng.7b01672Suche in Google Scholar
56. Liu, LX, Lu, JY, Zhang, Y, Liang, HY, Liang, DS, Jiang, JZ, et al.. Thermosetting polyurethanes prepared with the aid of a fully bio-based emulsifier with high bio-content, high solid content, and superior mechanical properties. Green Chem 2019;21:526–37.10.1039/C8GC03560ASuche in Google Scholar
57. Babanejad, N, Farhadian, A, Omrani, I, Nabid, MR. Design, characterization and in vitro evaluation of novel amphiphilic block sunflower oil-based polyol nanocarrier as a potential delivery system: raloxifene-hydrochloride as a model. Mater Sci Eng C 2017;78:59–68.10.1016/j.msec.2017.03.235Suche in Google Scholar
58. Omrani, I, Farhadian, A, Babanejad, N, Shendi, HK, Ahmadi, A, Nabid, MR. Synthesis of novel high primary hydroxyl functionality polyol from sunflower oil using thiol-yne reaction and their application in polyurethane coating. Eur Polym J 2016;82:220–31.10.1016/j.eurpolymj.2016.07.021Suche in Google Scholar
59. Hajirahimkhan, S, Xu, CC, Ragogna, PJ. Ultraviolet uv curable coatings of modified lignin. ACS Sustain Chem Eng 2018;6:14685–94.10.1021/acssuschemeng.8b03252Suche in Google Scholar
60. Guo, L, Huang, S, Qu, JQ. Synthesis and properties of high-functionality hydroxyl-terminated polyurethane dispersions. Prog Org Coating 2018;119:214–20.10.1016/j.porgcoat.2018.02.033Suche in Google Scholar
61. Valverde, C, Lligadas, G, Ronda, JC, Galià, M, Cádiz, V. Hydroxyl functionalized renewable polyesters derived from 10-undecenoic acid: polymer structure and postpolymerization modification. Eur Polym J 2018;105:68–78.10.1016/j.eurpolymj.2018.05.026Suche in Google Scholar
62. Hojabri, L, Kong, X, Narine, SS. Fatty acid-derived dilsocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization. Biomacromolecules 2009;10:884–91.10.1021/bm801411wSuche in Google Scholar
63. Shendi, HK, Omrani, I, Ahmadi, A, Farhadian, A, Babnejad, N, Nabid, MR. Synthesis and characterization of a novel internal emulsifier derived from sunflower oil for the preparation of waterborne polyurethane and their application in coatings. Prog Org Coating 2017;105:303–9.10.1016/j.porgcoat.2016.11.033Suche in Google Scholar
64. Cheng, Z, Li, QT, Yan, Z, Liao, GF, Zhang, BX, Yu, YM, et al.. Design and synthesis of novel aminosiloxane crosslinked linseed oil-based waterborne polyurethane composites and its physicochemical properties. Prog Org Coating 2019;127:194–201.10.1016/j.porgcoat.2018.11.020Suche in Google Scholar
65. Lu, KT, Chang, JP. Synthesis and antimicrobial activity of metal-containing linseed oil-based waterborne urethane oil wood coatings. Polymers 2020:12.10.3390/polym12030663Suche in Google Scholar
66. Chen, R, Zhang, C, Kessler, MR. Anionic waterborne polyurethane dispersion from a bio-based ionic segment. RSC Adv 2014;4:35476–83.10.1039/C4RA07519FSuche in Google Scholar
67. Openshaw, K. A review of jatropha curcas: an oil plant of unfulfilled promise. Biomass Bioenergy 2000;19:1–15.10.1016/S0961-9534(00)00019-2Suche in Google Scholar
68. Kumar, A, Sharma, S. An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): a review. Ind Crop Prod 2008;28:1–10.10.1016/j.indcrop.2008.01.001Suche in Google Scholar
69. Ling, CK, Aung, MM, Rayung, M, Abdullah, LC, Lim, HN, Noor, ISM. Performance of ionic transport properties in vegetable oil-based polyurethane acrylate gel polymer electrolyte. ACS Omega 2019;4:2554–64.10.1021/acsomega.8b02100Suche in Google Scholar
70. Sariah, S, Chuah, AL, Aung, MM, Salleh, MZ, Biak, DRA, Basri, M, et al.. Physicochemical properties of jatropha oil-based polyol produced by a two steps method. Molecules 2017;22:551.10.3390/molecules22040551Suche in Google Scholar
71. Saalah, S, Abdullah, LC, Aung, MM, Salleh, MZ, Biak, DRA, Basri, M, et al.. Colloidal stability and rheology of jatropha oil-based waterborne polyurethane (JPU) dispersion. Prog Org Coating 2018;125:348–57.10.1016/j.porgcoat.2018.09.018Suche in Google Scholar
72. Tanaka, R, Hirose, S, Hatakeyama, H. Preparation and characterization of polyurethane foams using a palm oil-based polyol. Bioresour Technol 2008;99:3810–6.10.1016/j.biortech.2007.07.007Suche in Google Scholar
73. Su, YP, Lin, H, Zhang, ST, Yang, ZH, Yuan, T. One-step synthesis of novel renewable vegetable oil-based acrylate prepolymers and their application in uv-curable coatings. Polymers 2020;12:1165.10.3390/polym12051165Suche in Google Scholar
74. Sittinun, A, Pisitsak, P, Manuspiya, H, Thiangtham, S, Chang, YH. Utilization of palm olein-based polyol for polyurethane foam sponge synthesis: potential as a sorbent material. J Polym Environ 2020;28:3181–91.10.1007/s10924-020-01834-4Suche in Google Scholar
75. Lligadas, G, Ronda, JC, Galia, M, Cadiz, V. Plant oils as platform chemicals for polyurethane synthesis: current state-of-the-art. Biomacromolecules 2010;11:2825–35.10.1021/bm100839xSuche in Google Scholar
76. Cayli, G, Kusefoglu, S. Biobased polyisocyanates from plant oil triglycerides: synthesis, polymerization, and characterization. J Appl Polym Sci 2010;109:2948–55.10.1002/app.28401Suche in Google Scholar
77. Cayli, G, Kusefoglu, S. A simple one-step synthesis and polymerization of plant oil triglyceride iodo isocyanates. J Appl Polym Sci 2010;116:2433–40.10.1002/app.31846Suche in Google Scholar
78. Hojabri, L, Kong, X, Narine, SS. Novel long chain unsaturated diisocyanate from fatty acid: synthesis, characterization, and application in bio‐based polyurethane. J Polym Sci, Part A: Polym Chem 2010;48:3302–10.10.1002/pola.24114Suche in Google Scholar
79. Zakzeski, J, Bruijnincx, PCA, Jongerius, AL, Weckhuysen, BM. The catalytic valorization of lignin for the production of renewable chemicals. Chem Rev 2013;110:3552–99.10.1021/cr900354uSuche in Google Scholar
80. Ma, XZ, Chen, J, Zhu, J, Yan, N. Lignin-based polyurethane: recent advances and future perspectives. Macromol Rapid Commun 2020:2000492.10.1002/marc.202000492Suche in Google Scholar
81. Dong, X, Dong, MD, Lu, YJ, Turley, A, Lin, T, Wu, CQ. Antimicrobial and antioxidant activities of lignin from residue of corn stover to ethanol production. Ind Crop Prod 2011;34:1629–34.10.1016/j.indcrop.2011.06.002Suche in Google Scholar
82. Domenek, S, Louaifi, A, Guinault, A, Baumberger, S. Potential of lignins as antioxidant additive in active biodegradable packaging materials. J Polym Environ 2013;21:692–701.10.1007/s10924-013-0570-6Suche in Google Scholar
83. El Salamouny, S, Shapiro, M, Ling, KS, Shepard, BM. Black tea and lignin as ultraviolet protectants for the beet armyworm nucleopolyhedrovirus. J Entomol Sci 2009;44:50–8.10.18474/0749-8004-44.1.50Suche in Google Scholar
84. Liu, LN, Qian, MB, Song, PA, Huang, GB, Yu, YM, Fu, SY. Fabrication of green lignin-based flame retardants for enhancing the thermal and fire retardancy properties of polypropylene/wood composites. ACS Sustain Chem Eng 2016;4:2422–31.10.1021/acssuschemeng.6b00112Suche in Google Scholar
85. Bernardini, J, Cinelli, P, Anguillesi, I, Coltelli, MB, Lazzeri, A. Flexible polyurethane foams green production employing lignin or oxypropylated lignin. Eur Polym J 2015;64:147–56.10.1016/j.eurpolymj.2014.11.039Suche in Google Scholar
86. Cinelli, P, Anguillesi, I, Lazzeri, A. Green synthesis of flexible polyurethane foams from liquefied lignin. Eur Polym J 2013;49:1174–84.10.1016/j.eurpolymj.2013.04.005Suche in Google Scholar
87. Liu, J, Liu, HF, Deng, L, Liao, B, Guo, QX. Improving aging resistance and mechanical properties of waterborne polyurethanes modified by lignin amines. J Appl Polym Sci 2013;130:1736–42.10.1002/app.39267Suche in Google Scholar
88. Ren, LF, Zhao, YX, Qiang, TT, He, QQ. Synthesis of a biobased waterborne polyurethane with epichlorohydrin-modified lignin. J Dispersion Sci Technol 2019;40:1499–506.10.1080/01932691.2018.1564671Suche in Google Scholar
89. Cheradame, H, Detoisien, M, Gandini, A, Pla, F, Roux, G. Polyurethane from kraft lignin. Br Polym J 1989;21:269–75.10.1002/pi.4980210314Suche in Google Scholar
90. Li, H, Liang, Y, Li, PC. Conversion of biomass lignin to high-value polyurethane: a review. A review. J Bioresour Bioprod 2020;5:163–79.10.1016/j.jobab.2020.07.002Suche in Google Scholar
91. Griffini, G, Passoni, V, Suriano, R, Levi, M, Turni, S. Polyurethane coatings based on chemically unmodified fractionated lignin. ACS Sustain Chem Eng 2015;3:1145–54.10.1021/acssuschemeng.5b00073Suche in Google Scholar
92. Wang, Y, Wyman, C, Cai, C, Ragauskas, AJ. Lignin-based polyurethanes from unmodified kraft lignin fractionated by sequential precipitation. ACS Appl Polym Mater 2019;1:1672–9.10.1021/acsapm.9b00228Suche in Google Scholar
93. Zhang, Y, Liao, JJ, Fang, XC, Bai, FD, Qiao, K, Wang, LM. Renewable high performance polyurethane bioplastics derived from lignin-poly(ε-caprolactone). ACS Sustain Chem Eng 2017;5:4276–84.10.1021/acssuschemeng.7b00288Suche in Google Scholar
94. Laurichesse, S, Avérous, L. Chemical modification of lignins: towards biobased polymers. Prog Polym Sci 2014;39:1266–90.10.1016/j.progpolymsci.2013.11.004Suche in Google Scholar
95. Lora, JH, Glasser, WG. Recent industrial applications of lignin: a sustainable alternative to nonrenewable materials. J Polym Environ 2002;10:39–48.10.1023/A:1021070006895Suche in Google Scholar
96. Sadeghifar, H, Cui, C, Argyropoulos, DS. Toward thermoplastic lignin polymers. Part I. selective masking of phenolic hydroxyl groups in kraft lignins via methylation and oxypropylation chemistries. Ind Eng Chem Res 2012;51:16713–20.10.1021/ie301848jSuche in Google Scholar
97. Ghosh, T, Karak, N. Cashew nut shell liquid terminated self-healable polyurethane as an effective anticorrosive coating with biodegradable attribute. Prog Org Coating 2020;139.10.1016/j.porgcoat.2019.105472Suche in Google Scholar
98. Kathalewar, M, Sabnis, A. Preparation of novel CNSL-based urethane polyol via nonisocyanate route: curing with melamine-formaldehyde resin and structure-property relationship. J Appl Polym Sci 2015;132:41391.10.1002/app.41391Suche in Google Scholar
99. Suresh, KI. Rigid polyurethane foams from cardanol: synthesis, structural characterization, and evaluation of polyol and foam properties. ACS Sustain Chem Eng 2012;1:232–42.10.1021/sc300079zSuche in Google Scholar
100. Wang, HR, Zhou, QX. Synthesis of cardanol-based polyols via thiol-ene/thiol-epoxy dual click-reactions and thermosetting polyurethanes therefrom. ACS Sustain Chem Eng 2018;6:12088–95.10.1021/acssuschemeng.8b02423Suche in Google Scholar
101. Hu, SJ, Wan, CX, Li, YB. Production and characterization of biopolyols and polyurethane foams from crude glycerol based liquefaction of soybean straw. Bioresour Technol 2012;103:227–33.10.1016/j.biortech.2011.09.125Suche in Google Scholar
102. Zhang, J, Hori, N, Takemura, A. Thermal and time regularities during oilseed rape straw liquefaction process to produce bio-polyol. J Clean Prod 2020;277:124015.10.1016/j.jclepro.2020.124015Suche in Google Scholar
103. Chen, FG, Lu, ZM. Liquefaction of wheat straw and preparation of rigid polyurethane foam from the liquefaction products. J Appl Polym Sci 2010;111:508–16.10.1002/app.29107Suche in Google Scholar
104. Wang, TP, Zhang, LH, Li, D, Yin, J, Wu, S, Mao, ZH. Mechanical properties of polyurethane foams prepared from liquefied corn stover with PAPI. Bioresour Technol 2008;99:2265–8.10.1016/j.biortech.2007.05.003Suche in Google Scholar
105. Jason, D, Yan, N. Producing bark-based polyols through liquefaction: effect of liquefaction temperature. ACS Sustain Chem Eng 2013;1:534–40.10.1021/sc400013eSuche in Google Scholar
106. Ye, LY, Zhang, JM, Zhao, J, Tu, S. Liquefaction of bamboo shoot shell for the production of polyols. Bioresour Technol 2014;153:147–53.10.1016/j.biortech.2013.11.070Suche in Google Scholar
107. Wang, D, Zhou, X, Song, R, Fang, C, Wang, Z, Wang, C, et al.. Freestanding silver/polypyrrole composite film for multifunctional sensor with biomimetic micropattern for physiological signals monitoring. Chem Eng J 2020;404:126940.10.1016/j.cej.2020.126940Suche in Google Scholar
108. Serrano, L, Rincón, E, García, A. Bio-degradable polyurethane foams produced by liquefied polyol from wheat straw biomass. Polymers 2020;12:2646.10.3390/polym12112646Suche in Google Scholar
109. Monica, FD, Kleij, AW. From terpenes to sustainable and functional polymers. Polym Chem 2020;11:5109–27.10.1039/D0PY00817FSuche in Google Scholar
110. Touaibia, M, Boutekedjiret, C, Perino, S, Chemat, F. Natural terpenes as building blocks for green chemistry. Singapore: Springer; 2019.10.1007/978-981-13-3810-6_7Suche in Google Scholar
111. Liu, GF, Wu, GM, Jin, C, Kong, ZW. Preparation and antimicrobial activity of terpene-based polyurethane coatings with carbamate group-containing quaternary ammonium salts. Prog Org Coating 2015;80:150–5.10.1016/j.porgcoat.2014.12.005Suche in Google Scholar
112. Gupta, RK, Ionescu, M, Radojcic, D, Wan, X, Petrovic, ZS. Novel renewable polyols based on limonene for rigid polyurethane foams. J Polym Environ 2014;22:304–9.10.1007/s10924-014-0641-3Suche in Google Scholar
113. Bhr, M, Bitto, A, Mülhaupt, R. Cyclic limonene dicarbonate as a new monomer for non-isocyanate oligo- and polyurethanes (NIPU) based upon terpenes. Green Chem 2012;14:1447–54.10.1039/c2gc35099hSuche in Google Scholar
114. Firdaus, M, Meier, MAR. Renewable polyamides and polyurethanes derived from limonene. Green Chem 2013;15:370–80.10.1039/C2GC36557JSuche in Google Scholar
115. Luc, C, Xavier, F, Serge, K. Ultrasonic and catalyst free epoxidation of limonene and other terpenes using dimethyl dioxirane in semi-batch conditions. ACS Sustain Chem Eng 2018;6:12224–31.10.1021/acssuschemeng.8b02578Suche in Google Scholar
116. Wu, GM, Kong, ZW, Chen, J, Huo, SP, Liu, GF. Preparation and properties of waterborne polyurethane/epoxy resin composite coating from anionic terpene-based polyol dispersion. Prog Org Coating 2014;77:315–21.10.1016/j.porgcoat.2013.10.005Suche in Google Scholar
117. Maiti, S, Ray, SS, Kundu, AK. Rosin: a renewable resource for polymers and polymer chemicals. Prog Polym Sci 1989;14:297–338.10.1016/0079-6700(89)90005-1Suche in Google Scholar
118. Wilbon, PA, Chu, FX, Tang, CB. Progress in renewable polymers from natural terpenes, terpenoids, and rosin. Macromol Rapid Commun 2013;34:8–37.10.1002/marc.201200513Suche in Google Scholar
119. Li, TT, Liu, XQ, Jiang, YH, Ma, SQ, Zhu, J. Bio-based shape memory epoxy resin synthesized from rosin acid. Iran Polym J 2016;25:1–9.10.1007/s13726-016-0482-0Suche in Google Scholar
120. Xu, X, Song, ZQ, Shang, SB, Cui, SQ, Rao, XP. Synthesis and properties of novel rosin-based water-borne polyurethane. Polym Int 2011;60:1521–6.10.1002/pi.3112Suche in Google Scholar
121. Hsieh, CC, Chen, YC. Synthesis of bio-based polyurethane foam modified with rosin using an environmentally-friendly process. J Clean Prod 2020:276.10.1016/j.jclepro.2020.124203Suche in Google Scholar
122. Liu, GF, Wu, GM, Chen, J, Kong, ZW. Synthesis, modification and properties of rosin-based non-isocyanate polyurethanes coatings. Prog Org Coating 2016;101:461–7.10.1016/j.porgcoat.2016.09.019Suche in Google Scholar
123. Vevere, L, Fridrihsone, A, Kirpluks, M. A Review of wood biomass-based fatty acids and rosin acids use in polymeric materials. Polymer 2020;12:2706.10.3390/polym12112706Suche in Google Scholar
124. Zhang, L, Jiang, Y, Xiong, Z, Liu, X, Na, H, Zhang, R, et al.. Highly recoverable resin-based shape memory polyurethenes. J Mater Chem 2013;1:3263.10.1039/c3ta01655bSuche in Google Scholar
125. Wang, YX, Zhang, LN. High-strength waterborne polyurethane reinforced with waxy maize starch nanocrystals. J Nanosci Nanotechnol 2008;8:5831–8.Suche in Google Scholar
126. Li, YY, Jing, WW, Wang, JH, Li, JF. Elucidating the relationship between structure and property of waterborne polyurethane-cellulose nanocrystals nanocomposite films. Sci Adv Mater 2020;12:1213–24.10.1166/sam.2020.3767Suche in Google Scholar
127. Omrani, I, Babanejad, N, Shendi, HK, Nabid, MR. Fully glutathione degradable waterborne polyurethane nanocarriers: preparation, redox-sensitivity, and triggered intracellular drug release. Mater Sci Eng C 2017;70:607–16.10.1016/j.msec.2016.09.036Suche in Google Scholar
128. Shin, EJ, Choi, SM. Advances in waterborne polyurethane-based biomaterials for biomedical applications. Adv Exp Med Biol 2018;107:251–83.10.1007/978-981-13-0947-2_14Suche in Google Scholar
129. Åkerholm, M, Hinterstoisser, B, Salmén, L. Characterization of the crystalline structure of cellulose using static and dynamic FT-IR spectroscopy. Carbohydr Res 2004;339:569–78.10.1016/j.carres.2003.11.012Suche in Google Scholar
130. Siró, I, Plackett, D. Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 2010;17:459–94.10.1007/s10570-010-9405-ySuche in Google Scholar
131. Liu, H, Song, J, Shang, SB, Song, ZQ, Wang, D. Cellulose nanocrystal/silver nanoparticle composites as bifunctional nanofillers within waterborne polyurethane. ACS Appl Mater Interfac 2012;4:2413–19.10.1021/am3000209Suche in Google Scholar
132. Klemm, D, Kramer, F, Moritz, S, Lindstrom, T, Ankerfors, M, Gray, D, et al.. Nanocelluloses: a new family of nature-based materials. Angew Chem Int Ed 2011;50:5438–66.10.1002/anie.201001273Suche in Google Scholar
133. Lee, KY, Aitomaki, Y, Berglund, LA, Oksman, K, Bismarck, A. On the use of nanocellulose as reinforcement in polymer matrix composites. Compos Sci Technol 2014;105:15–27.10.1016/j.compscitech.2014.08.032Suche in Google Scholar
134. Azeredo, HMC, Rosa, MF, Mattoso, LHC. Nanocellulose in bio-based food packaging applications. Ind Crop Prod 2016;97:664–71.10.1016/j.indcrop.2016.03.013Suche in Google Scholar
135. Jorfi, M, Foster, EJ. Recent advances in nanocellulose for biomedical applications. J Appl Polym Sci 2015;132.10.1002/app.41719Suche in Google Scholar
136. Chen, RD, Huang, CF, Hsu, SH. Composites of waterborne polyurethane and cellulose nanofibers for 3D printing and bioapplications. Carbohydr Polym 2019;212:75–88.10.1016/j.carbpol.2019.02.025Suche in Google Scholar
137. Dutta, GK, Karak, N. Waste brewed tea leaf derived cellulose nanofiber reinforced fully bio-based waterborne polyester nanocomposite as an environmentally benign material. RSC Adv 2019;9:20829–40.10.1039/C9RA02973GSuche in Google Scholar
138. Choi, SM, Lee, MW, Shin, EJ. One-pot processing of regenerated cellulose nanoparticles/waterborne polyurethane nanocomposite for eco-friendly polyurethane matrix. Polymers 2019;11.10.3390/polym11020356Suche in Google Scholar
139. Kong, L, Xu, D, He, Z, Wang, F, Gui, S, Fan, J, et al.. Nanocellulose-reinforced polyurethane for waterborne wood coating. Molecules 2019;24.10.3390/molecules24173151Suche in Google Scholar
140. Zhou, X, Zhang, X, Wang, D, Fang, C, Lei, W, Huang, Z, et al.. Preparation and characterization of waterborne polyurethane/cellulose nanocrystal composite membrane from recycling waste paper. J Renew Mater 2020;8:631–45.10.32604/jrm.2020.010176Suche in Google Scholar
141. Lei, W, Zhou, X, Fang, C, Song, Y, Li, Y. Eco-friendly waterborne polyurethane reinforced with cellulose nanocrystal from office waste paper by two different methods. Carbohydr Polym 2019;209:299–309.10.1016/j.carbpol.2019.01.013Suche in Google Scholar
142. Hormaiztegui, MEV, Daga, B, Aranguren, MI, Mucci, V. Bio-based waterborne polyurethanes reinforced with cellulose nanocrystals as coating films. Prog Org Coating 2020;144:105649.10.1016/j.porgcoat.2020.105649Suche in Google Scholar
143. Zhang, P, Lu, Y, Fan, M, Jiang, P, Dong, Y. Modified cellulose nanocrystals enhancement to mechanical properties and water resistance of vegetable oil-based waterborne polyurethane. J Appl Polym Sci 2019;136.10.1002/app.48228Suche in Google Scholar
144. Zhang, SD, Sun, K, Liu, H, Chen, XY, Zheng, YJ, Shi, XZ, et al.. Enhanced piezoresistive performance of conductive WPU/CNT composite foam through incorporating brittle cellulose nanocrystal. Chem Eng J 2020;387:124045.10.1016/j.cej.2020.124045Suche in Google Scholar
145. Cheng, LS, Ren, SB, Lu, XN. Application of eco-friendlywaterborne polyurethane composite coating incorporated with nano cellulose crystalline and silver nano particles on wood antibacterial board. Polymers 2020;12:407.10.3390/polym12020407Suche in Google Scholar
146. Hu, WL, Chen, SY, Yang, JX, Li, Z, Wang, HP. Functionalized bacterial cellulose derivatives and nanocomposites. Carbohydr Polym 2014;101:1043–60.10.1016/j.carbpol.2013.09.102Suche in Google Scholar
147. Urbina, L, Alonso-Varona, A, Saralegi, A, Palomares, T, Eceiza, A, Corcuera, MA, et al.. Hybrid and biocompatible cellulose/polyurethane nanocomposites with water-activated shape memory properties. Carbohydr Polym 2019;216:86–96.10.1016/j.carbpol.2019.04.010Suche in Google Scholar
148. Zia, F, Zia, KM, Zuber, M, Kamal, S, Aslam, N. Starch based polyurethanes: a critical review updating recent literature. Carbohydr Polym 2015;134:784–98.10.1016/j.carbpol.2015.08.034Suche in Google Scholar
149. Le Corre, D, Bras, J, Dufresne, A. Starch nanoparticles: a review. Biomacromolecules 2010;11:1139.10.1021/bm901428ySuche in Google Scholar
150. Chemelli, A, Gomernik, F, Thaler, F, Huber, A, Hirn, U, Bauer, W, et al.. Cationic starches in paper-based applications-a review on analytical methods. Carbohydr Polym 2020;235:115964.10.1016/j.carbpol.2020.115964Suche in Google Scholar
151. de Azeredo, HMC. Nanocomposites for food packaging applications. Food Res Int 2009;42:1240–53.10.1016/j.foodres.2009.03.019Suche in Google Scholar
152. Chum, HL. Polymers from biobased materials. USA: Noyes Data Corporation; 1991.Suche in Google Scholar
153. Tai, NL, Adhikari, R, Shanks, R, Halley, P, Adhikari, B. Flexible starch-polyurethane films: effect of mixed macrodiol polyurethane ionomers on physicochemical characteristics and hydrophobicity. Carbohydr Polym 2018;197:312–25.10.1016/j.carbpol.2018.06.019Suche in Google Scholar
154. Lee, SJ, Kim, BK. Covalent incorporation of starch derivative into waterborne polyurethane for biodegradability. Carbohydr Polym 2012;87:1803–9.10.1016/j.carbpol.2011.09.098Suche in Google Scholar
155. Ionescu, M. Chemistry and technology of polyols for polyurethanes. United Kingdom: Rapra Technology; 2005.Suche in Google Scholar
156. Wang, Y, Zhang, L. High-strength waterborne polyurethane reinforced with waxy maize starch nanocrystals. J Nanosci Nanotechnol 2008;8:5831–8.10.1166/jnn.2008.256Suche in Google Scholar
157. Chang, PR, Ai, FJ, Chen, Y, Dufresne, A, Huang, J. Effects of starch nanocrystal- graft -polycaprolactone on mechanical properties of waterborne polyurethane-based nanocomposites. J Appl Polym Sci 2008;111:619–27.10.1002/app.29060Suche in Google Scholar
158. Chen, GJ, Wei, M, Chen, JH, Huang, J, Dufresne, A, Chang, PR. Simultaneous reinforcing and toughening: new nanocomposites of waterborne polyurethane filled with low loading level of starch nanocrystals. Polymer 2008;49:1860–70.10.1016/j.polymer.2008.02.020Suche in Google Scholar
159. Yang, DY, Zhang, HQ, Rong, XS, Qiu, FX. Investigations on oxidised starch based waterborne polyurethane nanocomposites. Plast Rub Compos 2012;41:425–9.10.1179/1743289812Y.0000000009Suche in Google Scholar
160. Rinaudo, M. Chitin and chitosan-properties and applications. ChemInform 2007;31:603–32.10.1016/j.progpolymsci.2006.06.001Suche in Google Scholar
161. Younes, I, Rinaudo, M. Chitin and chitosan preparation from marine sources, structure, properties and applications. Mar Drugs 2015;13:1133–74.10.3390/md13031133Suche in Google Scholar
162. Kean, T, Thanou, M. Biodegradation, biodistribution and toxicity of chitosan. Adv Drug Deliv Rev 2010;62:3–11.10.1016/j.addr.2009.09.004Suche in Google Scholar
163. Bankoti, K, Rameshbabu, AP, Datta, S, Maity, PP, Goswami, P, Datta, P, et al.. Accelerated healing of full thickness dermal wounds by macroporous waterborne polyurethane-chitosan hydrogel scaffolds. Mater Sci Eng C 2017;81:133–43.10.1016/j.msec.2017.07.018Suche in Google Scholar
164. Naz, F, Zuber, M, Zia, KM, Salman, M, Chakraborty, J, Nath, I, et al.. Synthesis and characterization of chitosan-based waterborne polyurethane for textile finishes. Carbohydr Polym 2018;200:54–62.10.1016/j.carbpol.2018.07.076Suche in Google Scholar
165. Liu, YX, Zou, YL, Wang, J, Wang, S, Liu, XF. A novel cationic waterborne polyurethane coating modified by chitosan biguanide hydrochloride with application potential in medical catheters. J Appl Polym Sci 2020:e50290. https://doi.org/10.1002/app.50290.Suche in Google Scholar
166. Lin, TW, Hsu, SH. Self-healing hydrogels and cryogels from biodegradable polyurethane nanoparticle crosslinked chitosan. Adv Sci 2020;7:1901388.10.1002/advs.201901388Suche in Google Scholar
167. Xu, WW, Xiao, MH, Yuan, LT, Zhang, J, Hou, ZS. Preparation, physicochemical properties and hemocompatibility of biodegradable chitooligosaccharide-based polyurethane. Polymers 2018;10:580.10.3390/polym10060580Suche in Google Scholar
168. Hu, LS, Guang, CY, Liu, Y, Su, ZQ, Gong, SD, Yao, YJ, et al.. Adsorption behavior of dyes from an aqueous solution onto composite magnetic lignin adsorbent. Chemosphere 2020;246:125757.10.1016/j.chemosphere.2019.125757Suche in Google Scholar
169. Bhagavathi, LR, Deshpande, AP, Ram, GDJ, Panigrahi, SK. Hygrothermal aging, fatigue and dynamic mechanical behavior of cellulosic particles reinforced one-component moisture curable polyurethane adhesive joints. Int J Adhes Adhes 2021;105:102771.10.1016/j.ijadhadh.2020.102771Suche in Google Scholar
170. Oveissi, F, Naficy, S, Le, TYL, Fletcher, DF, Dehghani, F. Tough and processable hydrogels based on lignin and hydrophilic polyurethane. ACS Appl Bio Mater 2018;1:2073–81.10.1021/acsabm.8b00546Suche in Google Scholar
171. Yang, Q, Hu, G, Ma, Z. Review of characteristics of sodium alginate and its application in meat products. China Food Addit 2010:164–8.Suche in Google Scholar
172. Daemi, H, Barikani, M, Barmar, M. Compatible compositions based on aqueous polyurethane dispersions and sodium alginate. Carbohydr Polym 2013;92:490–6.10.1016/j.carbpol.2012.09.046Suche in Google Scholar
173. Drury, JL, Mooney, DJ. Hydrogels for tissue engineering: scaffold design variables and applications. Biomaterials 2003;24:4337–51.10.1016/S0142-9612(03)00340-5Suche in Google Scholar
174. Wang, X, Zhang, Y, Liang, HY, Zhou, X, Fang, CQ, Zhang, CQ, et al.. Synthesis and properties of castor oil-based waterborne polyurethane/sodium alginate composites with tunable properties. Carbohydr Polym 2019;208:391–7.10.1016/j.carbpol.2018.12.090Suche in Google Scholar
175. Zhang, Y, Zhang, WB, Deng, HH, Zhang, WH, Kang, J, Zhang, C. Enhanced mechanical properties and functional performances of cationic waterborne polyurethanes enabled by different natural phenolic acids. ACS Sustain Chem Eng 2020;8:17447–57.10.1021/acssuschemeng.0c05883Suche in Google Scholar
176. Ren, LF, Ma, XD, Zhang, J, Qiang, TT. Preparation of gallic acid modified waterborne polyurethane made from bio-based polyol. Polymer 2020;194:122370.10.1016/j.polymer.2020.122370Suche in Google Scholar
177. Xu, HP, Qiu, FX, Wang, YY, Wu, WL, Yang, DY, Guo, Q. UV-curable waterborne polyurethane-acrylate: preparation, characterization and properties. Prog Org Coating 2012;73:47–53.10.1016/j.porgcoat.2011.08.019Suche in Google Scholar
178. Chen, Y, Zhou, S, Gu, G, Wu, L. Microstructure and properties of polyester-based polyurethane/titania hybrid films prepared by sol-gel process. Polymer 2006;47:1640.10.1016/j.polymer.2005.12.073Suche in Google Scholar
179. Zhang, JY, Xu, HP, Hu, L, Yang, Y, Li, HB, Huang, C, et al.. Novel waterborne uv-curable hyperbranched polyurethane acrylate/silica with good printability and rheological properties applicable to flexographic ink. ACS Omega 2017;2:7546–58.10.1021/acsomega.7b00939Suche in Google Scholar
180. Zhang, WB, Zhang, Y, Liang, HY, Liang, DS, Cao, HY, Liu, CG, et al.. High bio-content castor oil based waterborne polyurethane/sodium lignosulfonate composites for environmental friendly UV absorption application. Ind Crop Prod 2019;142:111836.10.1016/j.indcrop.2019.111836Suche in Google Scholar
181. Johannson, C. Bio-nanocomposites for food packaging applications. Oxford: Oxford University Press; 2011.10.1093/acprof:oso/9780199581924.003.0014Suche in Google Scholar
182. Avnesh, K, Sudesh, KY, Subhash, C. Biodegradable polymeric nanoparticles based drug delivery systems. Colloids Surf B Biointerfaces 2009;75:1–18.10.1016/j.colsurfb.2009.09.001Suche in Google Scholar
183. Woodruff, MA, Hutmacher, DW. The return of a forgotten polymer-polycaprolactone in the 21st century. Prog Polym Sci 2010;35:1217–56.10.1016/j.progpolymsci.2010.04.002Suche in Google Scholar
184. Ali, FB, Kang, DJ, Kim, MP, Cho, CH, Kim, BJ. Synthesis of biodegradable and flexible, polylactic acid based, thermoplastic polyurethane with high gas barrier properties. Polym Int 2014;63:1620–6.10.1002/pi.4662Suche in Google Scholar
185. Arrieta, MP, Sessini, V, Peponi, L. Biodegradable poly(ester-urethane) incorporated with catechin with shape memory and antioxidant activity for food packaging. Eur Polym J 2017;94:111–24.10.1016/j.eurpolymj.2017.06.047Suche in Google Scholar
186. Mucci, VL, Hormaiztegui, MEV, Aranguren, MI. Plant oil-based waterborne polyurethanes: a brief review. J Renew Mater 2020;8:579–601.10.32604/jrm.2020.09455Suche in Google Scholar
187. Zhou, X, Fang, C, Yu, Q, Yang, R, Xie, L, Cheng, Y, et al.. Synthesis and characterization of waterborne polyurethane dispersion from glycolyzed products of waste polyethylene terephthalate used as soft and hard segment. Int J Adhesion Adhes 2017;74:49–56.10.1016/j.ijadhadh.2016.12.010Suche in Google Scholar
188. Lopez, A, Contraires, ED, Canetta, E, Creton, C, Keddie, JL, Asua, JM. Waterborne polyurethane-acrylic hybrid nanoparticles by miniemulsion polymerization: applications in pressure-sensitive adhesives. Langmuir 2011;27:3878–88.10.1021/la104830uSuche in Google Scholar
189. Liu, H, Li, C, Sun, XS. Soy-oil-based waterborne polyurethane improved wet strength of soy protein adhesives on wood. Int J Adhesion Adhes 2017;73:66–74.10.1016/j.ijadhadh.2016.09.006Suche in Google Scholar
190. Hu, J, Meng, H, Li, G, Ibekwe, SI. A review of stimuli-responsive polymers for smart textile applications. Smart Mater Struct 2012;21:053001.10.1088/0964-1726/21/5/053001Suche in Google Scholar
191. Liang, HY, Li, YC, Huang, SY, Huang, KX, Zeng, XY, Dong, QW, et al.. Tailoring the performance of vegetable oil-based waterborne polyurethanes through incorporation of rigid cyclic rings into soft polymer networks. ACS Sustain Chem Eng 2020;8:914–25.10.1021/acssuschemeng.9b05477Suche in Google Scholar
© 2021 Walter de Gruyter GmbH, Berlin/Boston
Artikel in diesem Heft
- Frontmatter
- Reviews
- Magnetic characterization of magnetoactive elastomers containing magnetic hard particles using first-order reversal curve analysis
- Microscopic understanding of particle-matrix interaction in magnetic hybrid materials by element-specific spectroscopy
- Biodeinking: an eco-friendly alternative for chemicals based recycled fiber processing
- Bio-based polyurethane aqueous dispersions
- Cellulose-based polymers
- Biodegradable shape-memory polymers and composites
- Natural substances in cancer—do they work?
- Personalized and targeted therapies
- Identification of potential histone deacetylase inhibitory biflavonoids from Garcinia kola (Guttiferae) using in silico protein-ligand interaction
- Chemical computational approaches for optimization of effective surfactants in enhanced oil recovery
- Social media and learning in an era of coronavirus among chemistry students in tertiary institutions in Rivers State
- Techniques for the detection and quantification of emerging contaminants
- Occurrence, fate, and toxicity of emerging contaminants in a diverse ecosystem
- Updates on the versatile quinoline heterocycles as anticancer agents
- Trends in microbial degradation and bioremediation of emerging contaminants
- Power to the city: Assessing the rooftop solar photovoltaic potential in multiple cities of Ecuador
- Phytoremediation as an effective tool to handle emerging contaminants
- Recent advances and prospects for industrial waste management and product recovery for environmental appliances: a review
- Integrating multi-objective superstructure optimization and multi-criteria assessment: a novel methodology for sustainable process design
- A conversation on the quartic equation of the secular determinant of methylenecyclopropene
- Recent developments in the synthesis and anti-cancer activity of acridine and xanthine-based molecules
- An overview of in silico methods used in the design of VEGFR-2 inhibitors as anticancer agents
- Fragment based drug design
- Advances in heterocycles as DNA intercalating cancer drugs
- Systems biology–the transformative approach to integrate sciences across disciplines
- Pharmaceutical interest of in-silico approaches
- Membrane technologies for sports supplementation
- Fused pyrrolo-pyridines and pyrrolo-(iso)quinoline as anticancer agents
- Membrane applications in the food industry
- Membrane techniques in the production of beverages
- Statistical methods for in silico tools used for risk assessment and toxicology
- Dicarbonyl compounds in the synthesis of heterocycles under green conditions
- Green synthesis of triazolo-nucleoside conjugates via azide–alkyne C–N bond formation
- Anaerobic digestion fundamentals, challenges, and technological advances
- Survival is the driver for adaptation: safety engineering changed the future, security engineering prevented disasters and transition engineering navigates the pathway to the climate-safe future
Artikel in diesem Heft
- Frontmatter
- Reviews
- Magnetic characterization of magnetoactive elastomers containing magnetic hard particles using first-order reversal curve analysis
- Microscopic understanding of particle-matrix interaction in magnetic hybrid materials by element-specific spectroscopy
- Biodeinking: an eco-friendly alternative for chemicals based recycled fiber processing
- Bio-based polyurethane aqueous dispersions
- Cellulose-based polymers
- Biodegradable shape-memory polymers and composites
- Natural substances in cancer—do they work?
- Personalized and targeted therapies
- Identification of potential histone deacetylase inhibitory biflavonoids from Garcinia kola (Guttiferae) using in silico protein-ligand interaction
- Chemical computational approaches for optimization of effective surfactants in enhanced oil recovery
- Social media and learning in an era of coronavirus among chemistry students in tertiary institutions in Rivers State
- Techniques for the detection and quantification of emerging contaminants
- Occurrence, fate, and toxicity of emerging contaminants in a diverse ecosystem
- Updates on the versatile quinoline heterocycles as anticancer agents
- Trends in microbial degradation and bioremediation of emerging contaminants
- Power to the city: Assessing the rooftop solar photovoltaic potential in multiple cities of Ecuador
- Phytoremediation as an effective tool to handle emerging contaminants
- Recent advances and prospects for industrial waste management and product recovery for environmental appliances: a review
- Integrating multi-objective superstructure optimization and multi-criteria assessment: a novel methodology for sustainable process design
- A conversation on the quartic equation of the secular determinant of methylenecyclopropene
- Recent developments in the synthesis and anti-cancer activity of acridine and xanthine-based molecules
- An overview of in silico methods used in the design of VEGFR-2 inhibitors as anticancer agents
- Fragment based drug design
- Advances in heterocycles as DNA intercalating cancer drugs
- Systems biology–the transformative approach to integrate sciences across disciplines
- Pharmaceutical interest of in-silico approaches
- Membrane technologies for sports supplementation
- Fused pyrrolo-pyridines and pyrrolo-(iso)quinoline as anticancer agents
- Membrane applications in the food industry
- Membrane techniques in the production of beverages
- Statistical methods for in silico tools used for risk assessment and toxicology
- Dicarbonyl compounds in the synthesis of heterocycles under green conditions
- Green synthesis of triazolo-nucleoside conjugates via azide–alkyne C–N bond formation
- Anaerobic digestion fundamentals, challenges, and technological advances
- Survival is the driver for adaptation: safety engineering changed the future, security engineering prevented disasters and transition engineering navigates the pathway to the climate-safe future