Frontmatter

Articles in the same Issue

1. Frontmatter
2. In this issue
3. Editorial
4. International Symposium on Environmental Damage Under Static and Cyclic Loads in Structural Metallic Materials at Ambient Temperatures III (Bergamo, Italy, June 15–20, 2014)
5. Overviews and reviews
6. U.S. Naval Aviation: operational airframe experience with combined environmental and mechanical loading
7. Thirty-five years in environmentally assisted cracking in Italy: a point of view
8. Fatigue and corrosion fatigue
9. Transgranular corrosion fatigue crack growth in age-hardened Al-Zn-Mg (-Cu) alloys
10. Effect of cyclic frequency on fracture mode transitions during corrosion fatigue cracking of an Al-Zn-Mg-Cu alloy
11. Crack growth behavior of 4340 steel under corrosion and corrosion fatigue conditions
12. Modeling of environmentally assisted fatigue crack growth behavior
13. Factors influencing embrittlement and environmental fracture
14. Pre-exposure embrittlement of an Al-Cu-Mg alloy, AA2024-T351
15. Electrochemical approach to repassivation kinetics of Al alloys: gaining insight into environmentally assisted cracking
16. Localized dissolution of grain boundary T₁ precipitates in Al-3Cu-2Li
17. Grain boundary anodic phases affecting environmental damage
18. Defect tolerance under environmentally assisted cracking conditions
19. Role of Mo/V carbides in hydrogen embrittlement of tempered martensitic steel
20. Stress corrosion cracking
21. The role of crack branching in stress corrosion cracking of aluminium alloys
22. An atomistically informed energy-based theory of environmentally assisted failure
23. Discrete dislocation modeling of stress corrosion cracking in an iron
24. Quasi-static behavior of notched Ti-6Al-4V specimens in water-methanol solution
25. Role of excessive vacancies in transgranular stress corrosion cracking of pure copper
26. Multiscale investigation of stress-corrosion crack propagation mechanisms in oxide glasses
27. Hydrogen assisted cracking
28. Hydrogen effects on fracture of high-strength steels with different micro-alloying
29. Environmentally assisted cracking and hydrogen diffusion in traditional and high-strength pipeline steels
30. Multiscale thermodynamic analysis on hydrogen-induced intergranular cracking in an alloy steel with segregated solutes