Band 12, Heft 14 - Special Issue: Nanophotonics in support of Ukrainian Scientists

In a reciprocal medium, transmission of electromagnetic (EM) waves is symmetric along opposite directions which restrict design and implementation of various systems in optics and photonics. Asymmetric transmission (AT) is essential for designing isolators and circulators in optics and photonics, and it benefits other applications such as photovoltaic systems, lasers, cloaking, and EM shielding. While bulky nonreciprocal devices based on magnetic field biases have been well known, creating AT in subwavelength structures is more challenging, and structures with a subwavelength thickness that show AT have drawn a lot of attention over the last decade. Various approaches have been reported to create metasurfaces featuring nonreciprocal transmission, such as plasmonic and dielectric metasurfaces that enhance Faraday rotation, nonlinear metasurfaces with intensity-dependent refractive indices, and implementing spatiotemporal modulation in a metasurface. On the other hand, AT has also been reported in reciprocal structures by creating multiple paths for the transmission of EM waves by changing the polarization of light or redirecting light to higher-order diffraction orders. Here, we present a review of various approaches implemented for realizing AT in subwavelength structures in both reciprocal and nonreciprocal systems. We also discuss the main design principles and limitations of AT achieved in various approaches.

There is growing interest in using multiple multiplexed orthogonal orbital angular momentum (OAM) beams to increase the data capacity of communication systems in different frequency ranges. To help enable future deployment of OAM-based communications, an ecosystem of compact and cost-effective OAM generators and detectors is likely to play an important role. Desired features of such integrated circuits include generating and detecting multiple coaxial OAM beams, tunability of OAM orders, and operation over a wide bandwidth. In this article, we discuss the use of pixel-array–based metasurfaces as OAM transmitters and receivers for mode division multiplexing (MDM) communications in near-infrared (NIR) and terahertz (THz) regimes.

The rapid development of optical technologies, such as optical manipulation, data processing, sensing, microscopy, and communications, necessitates new degrees of freedom to sculpt optical beams in space and time beyond conventionally used spatially homogenous amplitude, phase, and polarization. Structuring light in space and time has been indeed shown to open new opportunities for both applied and fundamental science of light. Rapid progress in nanophotonics has opened up new ways of “engineering” ultra-compact, versatile optical nanostructures, such as optical two-dimensional metasurfaces or three-dimensional metamaterials that facilitate new ways of optical beam shaping and manipulation. Here, we review recent progress in the field of structured light–matter interactions with a focus on all-dielectric nanostructures. First, we introduce the concept of singular optics and then discuss several other families of spatially and temporally structured light beams. Next, we summarize recent progress in the design and optimization of photonic platforms, and then we outline some new phenomena enabled by the synergy of structured light and structured materials. Finally, we outline promising directions for applications of structured light beams and their interactions with engineered nanostructures.

This review article focuses on the latest achievements in the creation of a class of electrotuneable optical metamaterials for switchable mirrors/windows, variable colour mirrors, optical filters, and SERS sensors, based on the voltage-controlled self-assembly of plasmonic nanoparticles at liquid/liquid or solid/liquid electrochemical interfaces. Practically, these experimental systems were navigated by physical theory, the role of which was pivotal in defining the optimal conditions for their operation, but which itself was advanced in feedback with experiments. Progress and problems in the realisation of the demonstrated effects for building the corresponding devices are discussed. To put the main topic of the review in a wider perspective, the article also discusses a few other types of electrovariable metamaterials, as well as some of those that are controlled by chemistry.

There is a pressing global need to increase the use of renewable energy sources and limit greenhouse gas emissions. Towards this goal, highly efficient and molecularly selective chemical processes that operate under mild conditions are critical. Plasmonic photocatalysis uses optically-resonant metallic nanoparticles and their resulting plasmonic, electronic, and phononic light-matter interactions to drive chemical reactions. The promise of simultaneous high-efficiency and product-selective reactions with plasmon photocatalysis provides a compelling opportunity to rethink how chemistry is achieved. Plasmonic nanoparticles serve as nanoscale ‘antennas’ that enable strong light–matter interactions, surpassing the light-harvesting capabilities one would expect purely from their size. Complex composite structures, combining engineered light harvesters with more chemically active components, are a focal point of current research endeavors. In this review, we provide an overview of recent advances in plasmonic catalysis. We start with a discussion of the relevant mechanisms in photochemical transformations and explain hot-carrier generation and distributions from several ubiquitous plasmonic antennae. Then we highlight three important types of catalytic processes for sustainable chemistry: ammonia synthesis, hydrogen production and CO 2 reduction. To help elucidate the reaction mechanism, both state-of-art electromagnetic calculations and quantum mechanistic calculations are discussed. This review provides insights to better understand the mechanism of plasmonic photocatalysis with a variety of metallic and composite nanostructures toward designing and controlling improved platforms for green chemistry in the future.

The mostly theoretical viewpoint, in which light is understood in terms of its singularities – caustics, phase vortices and lines of circular and linear polarisation – was developed in Bristol in the 1970s and 1980s. Starting in the 1990s, research by physicists in Ukraine, principally by Marat Soskin, stimulated the development of ‘singular optics’ as a thriving area of experimental and theoretical physics worldwide.

Additive manufacturing has become an important tool for fabricating advanced systems and devices for visible nanophotonics. However, the lack of simulation and optimization methods taking into account the essential physics of the optimization process leads to barriers for greater adoption. This issue can often result in sub-optimal optical responses in fabricated devices on both local and global scales. We propose that physics-informed design and optimization methods, and in particular physics-informed machine learning, are particularly well-suited to overcome these challenges by incorporating known physics, constraints, and fabrication knowledge directly into the design framework.

When light interacts with matter by means of scattering and absorption, we observe the resulting color. Light also probes the symmetry of matter and the result is encoded in its polarization. In the special case of circularly-polarized light, which is especially relevant in nonlinear optics, quantum photonics, and physical chemistry, a critical dimension of symmetry is along the longitudinal direction. We examine recent advances in controlling circularly-polarized light and reveal that the commonality in these advances is in judicious control of longitudinal symmetry. In particular, in the use of high quality-factor modes in dielectric metasurfaces, the finite thickness can be used to tune the modal profile. These symmetry considerations can be applied in multiplexed optical communication schemes, deterministic control of quantum emitters, and sensitive detection of the asymmetry of small molecules.

Some anisotropic materials form semicrystalline structures, called spherulites, when observed in a polarisation microscope, exhibit a characteristic “maltese-cross”-like pattern. While this observation has been hitherto considered as a tool to characterize these materials, we show that these patterns are associated with a strong light’s spin–orbit coupling induced by the spherulite structures. We experimentally demonstrate these effects using samples of crystallized ascorbic acid and observing the creation of optical vortices in transmitted laser beams, as well as the formation of inhomogeneous polarisation patterns. Our findings suggest the use of some spherulites based on other materials in frequency ranges, e.g. in the THz domain, where polarisation and spatial shaping of electromagnetic radiation is still a challenging task.

In the paper the binary mechanism of the long-distance image transfer in a wire-medium (WM) endoscope is suggested and studied. We have shown that a discrete image formed by a set of point sources TM-polarized with respect to the WM can be transferred from the input to the output of the endoscope in a very broad frequency band. The underlying physics is the formation of local channels by a group of four adjacent wires. It allows the transfer of the near field beyond the Fabry–Perot resonances at which the known canalization mechanism offers the image. Both numerical simulations and experimental measurements confirm the deeply subwavelength resolution on the output WM interface. The binary imaging was studied until the frequencies at which the endoscope length exceeds 5 λ . The transfer is possible in the entire investigated frequency range (from 1 up to 4 GHz) except for the frequencies where the Fabry–Perot resonance are not enough suppressed.

Particle counting is of critical importance for nanotechnology, environmental monitoring, pharmaceutical, food and semiconductor industries. Here we introduce a super-resolution single-shot optical method for counting and mapping positions of subwavelength particles on a surface. The method is based on the deep learning analysis of the intensity profile of the coherent light scattered on the group of particles. In a proof of principle experiment, we demonstrated particle counting accuracies of more than 90%. We also demonstrate that the particle locations can be mapped on a 4 × 4 grid with a nearly perfect accuracy (16-pixel binary imaging of the particle ensemble). Both the retrieval of number of particles and their mapping is achieved with super-resolution: accuracies are similar for sets with closely located optically unresolvable particles and sets with sparsely located particles. As the method does not require fluorescent labelling of the particles, is resilient to small variations of particle sizes, can be adopted to counting various types of nanoparticulates and high rates, it can find applications in numerous particles counting tasks in nanotechnology, life sciences and beyond.

Static reactive metasurfaces allow excitation and propagation of surface waves. In this paper, we theoretically elucidate how surface-wave propagation along a reactive boundary is affected by temporal discontinuities of effective parameters characterizing the boundary. First, we show that by switching the value of the surface reactance, the velocity of surface waves is fully controlled, and the power of reflected and transmitted surface waves can be amplified. Second, we indicate that when a boundary supporting waves with transverse-electric polarization is switched to the one allowing only transverse-magnetic polarization, the propagating surface wave is “frozen” and converted to a static magnetic-field distribution. Moreover, efficiently, these fields can be “melted”, restoring propagating surface waves when the boundary is switched back to the initial state. Finally, we demonstrate that temporal jumps of the boundary reactance couple free-space propagating waves to the surface wave, in an analogy to a spatial prism. All these intriguing phenomena enabled by temporal discontinuities of effective properties of reactive metasurfaces open up interesting possibilities for the generation and control of surface waves.

We present a comprehensive study of the temperature dependent electronic and optoelectronic properties of a tunnelling injection quantum dot laser. The optical power-voltage ( P opt – V ) characteristics are shown to be correlated with the current-voltage ( I – V ) and capacitance-voltage ( C – V ) dependencies at low and elevated temperatures. Cryogenic temperature measurements reveal a clear signature of resonant tunnelling manifested in periodic responses of the I – V and P opt – V characteristics, which diminish above 60 K. The C – V characteristics reveal a hysteresis stemming from charging and de-charging of the quantum dots, as well as negative capacitance. The latter is accompanied by a clear peak that appears at the voltage corresponding to carrier clamping, since the clamping induces a transient-like effect on the carrier density. C – V measurements lead also to a determination of the dot density which is found to be similar to that obtained from atomic force microscopy. C – V measurements enable also to extract the average number of trapped electrons in each quantum dot which is 0.95. As the important parameters of the laser have signatures in the electrical and electro-optical characteristics, the combination serves as a powerful tool to study intricate details of the laser operation.

Coronavirus disease 2019 (COVID-19) is a newly emerging human infectious disease that continues to develop new variants. A crucial step in the quest to reduce the infection is the development of rapid and reliable virus detectors. Here, we report a chip scale photonic sensing device consisting of a silicon-nitride double microring resonator (MRR) for detecting SARS-CoV-2 in clinical samples. The sensor is implemented by surface activation of one of the MRRs, acting as a probe, with DNA primers for SARS-CoV-2 RNA, whereas the other MRR is used as a reference. The performance of the sensor is determined by applying different amounts of SARS-CoV-2 complementary RNA. As will be shown in the paper, our device detects the RNA fragments at concentrations of 10 cp/μL and with sensitivity of 750 nm/RIU. As such, it shows a promise toward the implementation of label-free, small form factor, CMOS compatible biosensor for SARS-CoV-2, which is also environment, temperature, and pressure independent. Our approach can also be used for detecting other SARS-CoV-2 genes, as well as other viruses and pathogens.

Among the family of transition metal dichalcogenides, 1T-TaS 2 stands out for several peculiar physical properties including a rich charge density wave phase diagram, quantum spin liquid candidacy and low temperature Mott insulator phase. As 1T-TaS 2 is thinned down to the few-layer limit, interesting physics emerges in this quasi 2D material. Here, using scanning near-field optical microscopy, we perform a spatial- and temperature-dependent study on the phase transitions of a few-layer thick microcrystal of 1T-TaS 2 . We investigate encapsulated air-sensitive 1T-TaS 2 prepared under inert conditions down to cryogenic temperatures. We find an abrupt metal-to-insulator transition in this few-layer limit. Our results provide new insight in contrast to previous transport studies on thin 1T-TaS 2 where the resistivity jump became undetectable, and to spatially resolved studies on non-encapsulated samples which found a gradual, spatially inhomogeneous transition. A statistical analysis suggests bimodal high and low temperature phases, and that the characteristic phase transition hysteresis is preserved down to a few-layer limit.

Efficient electrical generation of mid-infrared light is challenging because of the dearth of materials with natural dipole-active electronic transitions in this spectral region. One approach to solve this problem is through quantum-engineering of the electron dispersion to create artificial transitions, as in quantum cascade devices. In this work we propose an alternative method to generate mid-infrared light, utilizing the coupling between longitudinal and transverse degrees of freedom due to the nonlocal optical response of nanoscopic polar dielectric crystals. Polar crystals support sub-diffraction photonic modes in the mid-infrared. They also support longitudinal phonons, which couple efficiently with electrical currents through the Fröhlich interaction. As we have shown in previous theoretical and experimental works, these two degrees of freedom can hybridize forming longitudinal-transverse polaritons. Here we theoretically demonstrate that longitudinal-transverse polaritons can be efficiently generated by electrical currents, leading to resonant narrowband photonic emission. This approach can therefore be utilised to electrically generate far-field mid-infrared photons in the absence of dipole-active electronic transitions, potentially underpinning a novel generation of mid-infrared optoelectronic devices.

Surging interests in point-of-device miniaturization have led to the development of metasurface-based optical components. Here, we demonstrate an electrically-driven ultracompact beam controller in the infrared spectral range. The effect benefits from diffraction gratings consisting of the commercially available conductive polymer PEDOT:PSS, which exhibits metal-to-insulator transition characteristics upon electrical biasing. By combining several metagratings with different superlattice periods in electrically isolated areas, our device enables diffraction beams at 16 and 33.5° when applying voltages of only ±1 V. Furthermore, no diffraction is realized by switching off the plasmonic property of the gratings. Dynamic control of electromagnetic wave via the presented platforms could be transformative for sensing, imaging, and communication applications.

Distinguishing between the left- and right-handed versions of a chiral molecule (enantiomers) is vital, but also inherently difficult. Traditional optical methods using elliptically/circularly polarized light rely on linear effects which arise beyond the electric-dipole approximation, posing major limitations for ultrafast spectroscopy. Here we show how to turn an ultrashort elliptical pulse into an efficient chiro-optical tool: by tilting its polarization plane towards its propagation direction. This forward tilt can be achieved by focusing the beam tightly, creating structured light which exhibits a nontrivial polarization pattern in space. Using state-of-the-art computational modelling, we show that our structured field realizes a near-field interferometer for efficient chiral recognition that separates the nonlinear optical response of left- and right-handed molecules in space. Our work provides a simple, yet highly efficient, way of spatially structuring the polarization of light to image molecular chirality, with extreme enantio-efficiency and on ultrafast time scales.

Temporally varying electromagnetic media have been extensively investigated recently to unveil new means for controlling light. However, spin-dependent phenomena in such media have not been explored thoroughly. Here, we reveal the existence of spin-dependent phenomena at a temporal interface between chiral and dielectric media. In particular, we show theoretically and numerically that due to the material discontinuity in time, linearly polarized light is split into forward-propagating right-handed and left-handed circularly polarized waves having different angular frequencies and the same phase velocities . This salient effect allows complete temporal separation of the two spin states of light with high efficiency. In addition, a phenomenon of spin-dependent gain/loss is observed. Furthermore, we show that when the dielectric medium is switched back to the original chiral medium, the right- and left-handed circularly polarized light waves (with different angular frequencies) merge to form a linearly polarized wave. Our findings extend spin-dependent interactions of light from space to space-time.

Temporal metamaterials, based on time-varying constitutive properties, offer new exciting possibilities for advanced field manipulations. In this study, we explore the capabilities of anisotropic temporal slabs, which rely on abrupt changes in time from isotropic to anisotropic response (and vice versa). Our findings show that these platforms can effectively manipulate the wave-spin dimension, allowing for a range of intriguing spin-controlled photonic operations. We demonstrate these capabilities through examples of spin-dependent analog computing and spin–orbit interaction effects for vortex generation. These results provide new insights into the field of temporal metamaterials, and suggest potential applications in communications, optical processing and quantum technologies.

Coherent control of quantum systems with phase-stable pulses offers enticing new opportunities for lightwave electronics. Here we extend this approach to many-body systems with spin degrees of freedom, demonstrating that a single few-cycle control pulse can create a sizable population asymmetry between the two degenerate polar ground states of the Ising model. This opens a route for femtosecond-scale data processing and storage, allowing one to control the final ground state of a correlated system in an all-optical way.

Using electrodynamical description of the average power absorbed by a conducting film, we present an expression for the electric-field intensity enhancement (FIE) due to epsilon-near-zero (ENZ) polariton modes. We show that FIE reaches a limit in ultrathin ENZ films inverse of second power of ENZ losses. This is illustrated in an exemplary series of aluminum-doped zinc oxide nanolayers grown by atomic layer deposition. Only in a case of unrealistic lossless ENZ films, FIE follows the inverse second power of film thickness predicted by S. Campione, et al. [ Phys. Rev. B , vol. 91, no. 12, art. 121408, 2015]. We also predict that FIE could reach values of 100,000 in ultrathin polar semiconductor films. This work is important for establishing the limits of plasmonic field enhancement and the development of near zero refractive index photonics, nonlinear optics, thermal, and quantum optics in the ENZ regime.

Control over the time dependence of the refractive index of a material allows one to modify and manipulate the properties of light propagating through it. While metamaterials provide a promising avenue in this context, another route has been extensively explored by the ultrafast community — the so-called molecular modulators. Indeed, impulsively-aligned diatomic molecules provide a unique medium, where periodic rotational revivals induced by a pump pulse persist for tens of picoseconds, offering an excellent opportunity for the controlled modification of the refractive index and, therefore, of femtosecond laser pulses propagating through these media. Here we present an analytical theory which describes this process and stumble across a novel mechanism revealing exponential transformations of the probe pulse — its compression, amplification and frequency up-conversion. In particular, our analytical results predict the generation of amplified ultrashort (about 20 fs) ultraviolet pulses centered around 550 nm, starting with near infrared input pulses centered on 1 μm of about 30 fs duration, under very realistic experimental conditions.

The polar nature of calcite results in lattice vibrations that can be stimulated through gratings and nanostructures to design spatially and spectrally coherent thermal radiation patterns. In order to obtain optimal design control over such patterned materials, it is first necessary to understand the fundamental emissivity properties of the lattice vibrations themselves. Because calcite is a uniaxial material, when the optic axis (OA) is tilted with respect to the crystal surface, the surface wave solutions to Maxwell’s equations and vibrational modes that are permitted will change due to the crystal’s structural anisotropy. This implies that the OA orientation can play a critical role in dictating which modes can be harnessed when designing a narrowband or angular thermal emitter. Here we explore the angle and polarization dependence of the bulk far-field emissivity of unpatterned calcite with tilted OA. We show that by manipulating the OA orientation via crystallographic off-cut, polarization, and sample rotation, the emissivity at a given frequency can vary by as much as 0.8. These results suggest that, in addition to serving as a basis for modifying the behavior of the relevant phonon polaritons, OA orientation can be used to alter the thermal emission pattern without the need for complex lithographic patterning.

Using tip-enhanced photoluminescence (TEPL), we investigate micron-size monolayer MoS 2 flakes. In a sequence of studies, we apply various voltages between the Ag-coated nano-tip and the MoS 2 flakes and observe an intriguing result. During the TEPL measurement, we observe that the photoluminescence spectrum is blue shifted and the overall signal intensity is increased. We attribute this behavior to plasmon-induced electron injection into MoS 2 . Additionally, when the tip is negatively biased with respect to the sample during the TEPL measurement, the nonuniform TEPL images of MoS 2 monolayer flakes containing defects are gradually changed to be uniform that reach saturation. We verify that this saturation state in TEPL can last over half a year.

One of the prime applications of squeezed light is enhancing the sensitivity of an interferometer below the quantum shot-noise limit, but so far, no such experimental demonstration was reported when using the optical Kerr effect. In prior setups involving Kerr-squeezed light, the role of the interferometer was merely to characterize the noise pattern. The lack of such a demonstration was largely due to the cumbersome tilting of the squeezed ellipse in phase space. Here, we present the first experimental observation of phase-sensitivity enhancement in an interferometer using Kerr squeezing.

Dynamic optical metasurfaces with ultrafast temporal response, i.e., spatiotemporal optical metasurfaces, provide attractive solutions and open fascinating perspectives for modern highly integrated optics and photonics. In this work, electro-optically controlled optical metasurfaces operating in reflection and utilizing resonant waveguide mode excitation are demonstrated from the viewpoint of free-space propagating light modulation. The modulation of reflected light power with superior characteristics in comparison with prior research is achieved by identifying a suitable low-loss waveguide mode and exploiting its resonant excitation. The electro-optic Pockels effect in a 300 nm-thick lithium niobate (LN) film sandwiched between a continuous thick gold film and an array of gold nanostripes, serving also as control electrodes, is exploited to realize fast and efficient light modulation. The fabricated compact (active area <1000 µm 2 ) modulators operate in the wavelength range of 850–950 nm, featuring a maximum intensity modulation depth of 42 % at the driving voltage of ±10 V within the bandwidth of 13.5 MHz (with the potential bandwidth of 6.5 GHz). The introduced nonlocal electro-optic metasurface configuration opens new avenues towards the realization of ultrafast, efficient, and robust free-space light modulators based on an LN flat optics approach.

Periodic arrays can support highly nontrivial modal dispersion, stemming from the interplay between localized resonances of the array elements and distributed resonances supported by the lattice. Recently, intentional defects in the periodicity, i.e., broken in situ symmetries, have been attracting significant attention as a powerful degree of freedom for dispersion control. Here we explore highly nontrivial dispersion features in the resonant response of linear arrays of plasmonic particles, including the emergence of braiding and band knots caused by band folding. We show that these phenomena can be achieved within simple dipolar arrays for which we can derive closed-form expressions for the dispersion relation. These phenomena showcase powerful opportunities stemming from broken symmetries for extreme dispersion engineering, with a wide range of applications, from plasma physics to topological wave phenomena. Our theoretical model can also be generalized to higher dimensions to explore higher-order symmetries, e.g., glide symmetry and quasi-periodicity.

Anisotropic Self-Complementary Metasurfaces (SC-MTSs) are structures constituted by an alternation of complementary inductive and capacitive strips, which are “self-dual” according to Babinet’s duality principle. They support the propagation of two orthogonally polarized surface-wave modes with the same phase velocity along the principal directions (i.e., along the strips and normal to them). The isofrequency dispersion curves of these modes are hyperbolas, and therefore, these MTSs fall in the category of hyperbolic MTSs. It is shown here that the hyperbolic dispersion curves may degenerate in same cases into almost straight lines, which implies that the velocity of energy transport is constantly directed along the same direction for any possible phasing orthogonal to the strips. In this circumstance, the SC-MTS can be conveniently used to design dual-polarized leaky-wave antennas by modulating the impedances of the complementary strips.

3-D depth sensing is essential for many applications ranging from consumer electronics to robotics. Passive depth sensing techniques based on a double-helix (DH) point-spread-function (PSF) feature high depth estimation precision, minimal power consumption, and reduced system complexity compared to active sensing methods. Here, we propose and experimentally implemented a polarization-multiplexed DH metalens designed using an autonomous direct search algorithm, which utilizes two contra-rotating DH PSFs encoded in orthogonal polarization states to enable monocular depth perception. Using a reconstruction algorithm that we developed, concurrent depth calculation and scene reconstruction with minimum distortion and high resolution in all three dimensions were demonstrated.

High-index dielectric nanoantennas, which provide an interplay between electric and magnetic modes, have been widely used as building blocks for a variety of devices and metasurfaces, both in linear and nonlinear regimes. Here, we investigate hybrid metal-semiconductor nanoantennas, consisting of a multimode silicon nanopillar core coated with a gold layer, that offer an enhanced degree of control over the mode selection and confinement, and emission of light on the nanoscale exploiting high-order electric and magnetic resonances. Cathodoluminescence spectra revealed a multitude of resonant modes supported by the nanoantennas due to hybridization of the Mie resonances of the core and the plasmonic resonances of the shell. Eigenmode analysis revealed the modes that exhibit enhanced field localization at the gold interface, together with high confinement within the nanopillar volume. Consequently, this architecture provides a flexible means of engineering nanoscale components with tailored optical modes and field confinement for a plethora of applications, including sensing, hot-electron photodetection and nanophotonics with cylindrical vector beams.

Here, we show that isorefractive spacetime crystals with a travelling-wave modulation may mimic rigorously the response of moving material systems. Unlike generic spacetime crystals, which are characterized by a bi-anisotropic coupling in the co-moving frame, isorefractive crystals exhibit an observer-independent response, resulting in isotropic constitutive relations devoid of any bianisotropy. We show how to take advantage of this property in the calculation of the band diagrams of isorefractive spacetime crystals in the laboratory frame and in the study of the synthetic Fresnel drag. Furthermore, we discuss the impact of considering either a Galilean or a Lorentz transformation in the homogenization of spacetime crystals, showing that the effective response is independent of the considered transformation.

In recent years, wave-based analog computing has been at the center of attention for providing ultra-fast and power-efficient signal processing enabled by wave propagation through artificially engineered structures. Building on these structures, various proposals have been put forward for performing computations with waves. Most of these proposals have been aimed at linear operations, such as vector-matrix multiplications. The weak and hardly controllable nonlinear response of electromagnetic materials imposes challenges in the design of wave-based structures for performing nonlinear operations. In the present work, first, by using the method of inverse design we propose a three-port device, which consists of a combination of linear and Kerr nonlinear materials, exhibiting the desired power-dependent transmission properties. Then, combining a proper arrangement of such devices with a collection of Mach–Zehnder interferometers (MZIs), we propose a reconfigurable nonlinear optical architecture capable of implementing a variety of nonlinear functions of the input signal. The proposed device may pave the way for wave-based reconfigurable nonlinear signal processing that can be combined with linear networks for full-fledged wave-based analog computing.