Band 12, Heft 10

Droplets provide unique opportunities for the investigation of laser-induced surface chemistry. Chemical reactions on the surface of charged droplets are ubiquitous in nature and can provide critical insight into more efficient processes for industrial chemical production. Here, we demonstrate the application of the reaction nanoscopy technique to strong-field ionized nanodroplets of propanediol (PDO). The technique’s sensitivity to the near-field around the droplet allows for the in-situ characterization of the average droplet size and charge. The use of ultrashort laser pulses enables control of the amount of surface charge by the laser intensity. Moreover, we demonstrate the surface chemical sensitivity of reaction nanoscopy by comparing droplets of the isomers 1,2-PDO and 1,3-PDO in their ion emission and fragmentation channels. Referencing the ion yields to gas-phase data, we find an enhanced production of methyl cations from droplets of the 1,2-PDO isomer. Density functional theory simulations support that this enhancement is due to the alignment of 1,2-PDO molecules on the surface. The results pave the way towards spatio-temporal observations of charge dynamics and surface reactions on droplets.

Coupling of surface plasmon polaritons (SPPs) supported by graphene and hyperbolic phonon polaritons (HPPs) supported by hyperbolic materials (HMs) could effectively promote photon tunneling, and hence the radiative heat transfer. In this work, we investigate the polariton hybridization phenomena on near-field radiative heat transfer (NFRHT) in multilayer heterostructures, which consist of periodic graphene/ α -MoO 3 cells. Numerical results show that increasing the graphene/α-MoO 3 cells can effectively enhance the NFRHT when the vacuum gap is less than 50 nm, but suppresses the enhanced performance with larger gap distance. This depends on the coupling of SPPs and HPPs in the periodic structure, which is analyzed by the energy transmission coefficients distributed in the wavevector space. The influence of the thickness of the α-MoO 3 film and the chemical potential of graphene on the NFRHT is investigated. The findings in this work may guide designing high-performance near-field energy transfer and conversion devices based on coupling polaritons.

The plasma sheath causes the spacecraft’s communication signal to attenuate dramatically during the re-entry period, which seriously threatens the astronauts. However, valid experimental protocols have not been obtained hitherto. To realize the propagation of electromagnetic waves in negative permittivity background of the plasma sheath, alumina columns are embedded in the plasma background to form plasma photonic crystals, which can support the coupling of evanescent waves between the alumina columns. We experimentally demonstrate the realization of communication in blackout scenario by achieving a complete passing band in the plasma cutoff region. For high frequency communications in the plasma sheath, electromagnetic wave propagation based on topological edge states is also experimentally demonstrated. Furthermore, we realize a triply-degenerate Dirac cone formed dynamically at the center of the Brillouin zone by modulating the electron density, where electromagnetic wave exhibits high transmittance and does not experience phase accumulation at the Dirac point. Our work thus not only provides an effective approach to overcome the communication blackout problem, but the design can also be served as a promising experimental platform to explore topological electromagnetic phenomena.

Recent advances in near-field technology with an ultrahigh spatial resolution breaking optical diffraction limit, make it possible to further identify surface-enhanced Raman scattering (SERS) enhancement theories, and to monitor the SERS substrates. Here we verify the electromagnetic enhancement mechanism for SERS with a close-up view, using scattering-type scanning near-field optical microscopy. The array of metal-insulator-metal (MIM) subwavelength structures is studied, in which the field enhancement comes from the strong coupling between gap plasmon polariton and surface plasmon polariton modes. The near-field optical measurements reveal that SERS enhancement factor (EF) varies from one MIM subwavelength unit to another in a finite array. Besides the enhancement of isolated unit, the loss exchange phenomenon in strong coupling with a large Rabi splitting can give rise to an additional enhancement of more than 2 orders of magnitude in periodic arrays and close to 3 orders of magnitude in finite arrays. The SERS EF of the array composed of only 5 units is demonstrated to yield the best SERS performance. Our near-field optical measurements show evidence that finite-size structures embodied with strong coupling effect are a key way to develop practical high-performance SERS substrates.

Terahertz (THz) waves are a highly sensitive probe of free carrier concentrations in semiconducting materials. However, most experiments operate in the far-field, which precludes the observation of nanoscale features that affect the material response. Here, we demonstrate the use of nanoscale THz plasmon polaritons as an indicator of surface quality in prototypical quantum devices properties. Using THz near-field hyperspectral measurements, we observe polaritonic features in doped silicon near a metal-semiconductor interface. The presence of the THz surface plasmon polariton indicates the existence of a thin film doped layer on the device. Using a multilayer extraction procedure utilising vector calibration, we quantitatively probe the doped surface layer and determine its thickness and complex permittivity. The recovered multilayer characteristics match the dielectric conditions necessary to support the THz surface plasmon polariton. Applying these findings to superconducting resonators, we show that etching of this doped layer leads to an increase of the quality factor as determined by cryogenic measurements. This study demonstrates that THz scattering-type scanning near-field optical microscopy (s-SNOM) is a promising diagnostic tool for characterization of surface dielectric properties of quantum devices.

The study of spin–orbit coupling (SOC) of light is crucial to explore the light–matter interactions in sub-wavelength structures. By designing a plasmonic lattice with chiral configuration that provides parallel angular momentum and spin components, one can trigger the strength of the SOC phenomena in photonic or plasmonic crystals. Herein, we explore the SOC in a plasmonic crystal, both theoretically and experimentally. Cathodoluminescence (CL) spectroscopy combined with the numerically calculated photonic band structure reveals an energy band splitting that is ascribed to the peculiar spin–orbit interaction of light in the proposed plasmonic crystal. Moreover, we exploit angle-resolved CL and dark-field polarimetry to demonstrate circular-polarization-dependent scattering of surface plasmon waves interacting with the plasmonic crystal. This further confirms that the scattering direction of a given polarization is determined by the transverse spin angular momentum inherently carried by the SP wave, which is in turn locked to the direction of SP propagation. We further propose an interaction Hamiltonian based on axion electrodynamics that underpins the degeneracy breaking of the surface plasmons due to the spin–orbit interaction of light. Our study gives insight into the design of novel plasmonic devices with polarization-dependent directionality of the Bloch plasmons. We expect spin–orbit interactions in plasmonics will find much more scientific interests and potential applications with the continuous development of nanofabrication methodologies and uncovering new aspects of spin–orbit interactions.

Infrared camouflage is an effective technique to avoid many kinds of target detection by detectors in the infrared band. For a high-temperature environment, thermal management of selective emission is crucial to dissipate heat in the mid-infrared non-atmospheric window (5–8 μm). However, it still remains challenges for balancing infrared camouflage and thermal management. Here, we experimentally demonstrate a multilayer film structure (MFS) for infrared camouflage with thermal management. Combining the ideal emission spectrum and genetic algorithm (GA), the inverse-design MFS containing 7 layers of five materials (SiO 2 , Ge, ZnS, Pt and Au) has been designed. Based on the hierarchical metamaterial, the optimized MFS has high performance of infrared camouflage to against the lidar detection in the near-infrared band. The experimental results reveal the high compatible efficiency among thermal camouflage ( ε 3–5μm = 0.21, ε 8–14μm = 0.16), laser stealth ( ε 1.06μm = 0.64, ε 1.55μm = 0.90, ε 10.6μm = 0.76) and thermal management ( ε 5–8μm = 0.54). Therefore, the proposed MFSs are attractive as basic building block of selective emitter, for the application of advanced photonics such as radiative cooling, infrared camouflage, and thermal emission.

We report on an index-coupled distributed feedback (DFB) quantum cascade lasers (QCLs) of high single-mode stability by using of a grating reflector (GR) to reflect effectively light of a specific wavelength. Fabrications of the QCLs were performed with λ ∕4 equivalent phase shift (EPS) or sampled Moiré grating (SMG) structure, which regulates the light intensity distribution in the cavity and coupling strength. Both EPS-GR and SMG-GR QCLs demonstrate a high emission wavelength precision and a side-mode-suppression-ratio (SMSR) of 24.5 dB at the injection current of 5 A and the pulse width of 5 μs, offering considerable output power even at the edge of the gain spectrum. Furthermore, we investigated the arrays of EPS-GR and SMG-GR QCLs with lower threshold current and higher output power by introducing semi-insulated InP (Fe) ranging from 8.25 to 8.67 μm and 8.16–8.63 μm, respectively. The present QCLs via a GR are prospective for applications requiring single-mode stability and wide tunability.

To date, various optimization algorithms have been used to design non-intuitive photonic structures with unconventional optical performance. Good training datasets facilitate the optimization process, particularly when an objective function has a non-convex shape containing multiple local optima in a continuous parametric space. Herein, we developed a discrete-to-continuous optimization algorithm and confirmed its validity by designing and fabricating deep-ultraviolet antireflective MgF 2 /LaF 3 multilayers. For discrete optimization, a multilayer was encoded into a binary vector with multiple bits; a 10 nm thick MgF 2 or LaF 3 layer was assigned a binary digit of 0 or 1, respectively. Using the binary-based training datasets, a factorization machine formulated a surrogate function, which discovered the ground binary vector representing a near-optimal figure of merit. Then, the figure of merit was refined through continuous optimization (e.g., using an interior-point method) of the ground binary vector. MgF 2 /LaF 3 multilayers with a variety of bit levels were created to attain a minimum average angular (0°–45°) reflectance at 193 nm. A MgF 2 /LaF 3 multilayer optimized at ten bits (i.e., a total thickness of approximately 100 nm) yielded an average reflectance of 0.2%, which agreed well with the experimental results. Moreover, an integrated ray-wave optics simulation predicted that a single CaF 2 plano-convex lens coated with the optimized multilayer could exhibit a transmittance of 99.7%. The developed optimization approach will be widely applicable to any photonic structures that can represent a binary vector with multiple bits, such as microwave metasurfaces, in addition to being useful for producing ideal optical multilayers.

Three-dimensional (3D) information is vital for providing detailed features of the physical world, which is used in numerous applications such as industrial inspection, automatic navigation and identity authentication. However, the implementations of 3D imagers always rely on bulky optics. Metasurfaces, as the next-generation optics, shows flexible modulation abilities and excellent performance combined with computer vision algorithm. Here, we demonstrate an active 3D positioning and imaging method with large field of view (FOV) by single fringe projection based on metasurface and solve the accurate and robust calibration problem with the depth uncertainty of 4 μm. With a compact metasurface projector, the demonstrated method can achieve submillimeter positioning accuracy under the FOV of 88°, offering robust and fast 3D reconstruction of the texture-less scene due to the modulation characteristic of the fringe. Such scheme may accelerate prosperous engineering applications with the continued growth of flat-optics manufacturing process by using metadevices.

The efficient generation, accurate detection, and detailed physical tracking of energetic electrons are of applied interest for high harmonics generation, electron-impact spectroscopy, and femtosecond time-resolved scanning tunneling microscopy. We here investigate the generation of photoelectrons (PEs) by exposing plasmonic nanostructures to intense laser pulses in the infrared (IR) spectral regime and analyze the sensitivity of PE spectra to competing elementary interactions for direct and rescattered photoemission pathways. Specifically, we measured and numerically simulated emitted PE momentum distributions from prototypical spherical gold nanoparticles (NPs) with diameters between 5 and 70 nm generated by short laser pulses with peak intensities of 8.0 × 10 12 and 1.2 × 10 13  W/cm 2 , demonstrating the shaping of PE spectra by the Coulomb repulsion between PEs, accumulating residual charges on the NP, and induced plasmonic electric fields. Compared to well-understood rescattering PE cutoff energies for strong-field photoemission from gaseous atomic targets (10× the ponderomotive energy), our measured and simulated PE spectra reveal a dramatic cutoff-energy increase of two orders of magnitude with a significantly higher contribution from direct photoemission. Our findings indicate that direct PEs reach up to 93 % of the rescattered electron cutoff energy, in contrast to 20 % for gaseous atoms, suggesting a novel scheme for the development of compact tunable tabletop electron sources.