Startseite Technik Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films

  • Yu Qiu EMAIL logo , Peter Gerstel , Linqin Jiang , Peter Lipowsky , Luciana Pitta Bauermann und Joachim Bill
Veröffentlicht/Copyright: 11. Januar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Manuskript einreichen Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 6

Abstract

Crystalline In(OH)3 and UV-emitting In2O3 thin films with a unique columnar morphology have been successfully prepared for the first time via a simple aqueous solution deposition method. In the present study, sulfonate-terminated self-assembled monolayers on single-crystal Si wafers were used as substrates for the film deposition. Uniform In(OH)3 thin films formed on self-assembled monolayers in aqueous solutions of InCl3 · 4H2O at 60°C. These films, containing columnar In(OH)3 crystals, showed preferential growth orientation along the [100] direction. The current understanding of the film formation mechanism was discussed. After annealing in air at 400 °C, these films were converted to nanocrystalline In2O3 films without modification of the morphology. Photoluminescence emission from In2O3 films was reported at approximately 3.4 eV, which was ascribed to the near-band-edge emission.

Keywords: Indium oxide; Indium hydroxide; Thin film; Aqueous solution; Photoluminescence
Dr. Yu Qiu Max-Planck-Institut für Metallforschung Pulvermetallurgisches Laboratorium Heisenbergstr. 3, D-70569 Stuttgart, Germany Tel.: +49 711 689 3101 Fax: +49 711 689 3131

Dedicated to Professor Dr. Fritz Aldinger on the occasion of his 65th birthday

  1. This work is partly supported by Alexander von Humboldt (AvH) Foundation.

References

[1] P. Guha, S. Kar, S. Chaudhuri: Appl. Phys. Lett. 85 (2004) 3851.10.1063/1.1808886Suche in Google Scholar

[2] A. Murali, A. Barve, V.J. Leppert, S.H. Risbud, I.M. Kennedy, H.W.H. Lee: Nano Lett. 1 (2001) 287.10.1021/nl010013qSuche in Google Scholar

[3] D. Zhang, Z. Liu, C. Li, T. Tang, X. Liu, S. Han, B. Lei, C. Zhou: Nano Lett. 4 (2004) 1919.10.1021/nl0489283Suche in Google Scholar

[4] L.A. Mîinea, D.M. Hoffman: J. Mater. Chem. 10 (2000) 2392.10.1039/b003886pSuche in Google Scholar

[5] N.H. Kim, J.H. Myung, H.W. Kim, C. Lee: Phys. Stat. Sol. (a) 202 (2005) 108.10.1002/pssa.200406916Suche in Google Scholar

[6] M.F.A.M. van Hest, M.S. Dabney, J.D. Perkins, D.S. Ginley, M.P. Taylor: Appl. Phys. Lett. 87 (2005) 032111.10.1063/1.1995957Suche in Google Scholar

[7] M. Epifani, S. Capone, R. Rella, P. Siciliano, L. Vasanelli, G. Faglia, P. Nelli, G. Sberveglieri: J. Sol-Gel Sci. Technol. 26 (2003) 741.10.1023/A:1020754306392Suche in Google Scholar

[8] J. Ni, L. Wang, Y. Yang, H. Yan, S. Jin, T.J. Marks, J.R. Ireland, C.R. Kannewurf: Inorg. Chem. 44 (2005) 6071.10.1021/ic0501364Suche in Google Scholar PubMed

[9] C. Falcony, J.R. Kirtley, D.J. Dimaria, T.P. Ma, T.C. Chen: J. Appl. Phys. 58 (1985) 3556.10.1063/1.335730Suche in Google Scholar

[10] T.M. Fuchs, R.C. Hoffmann, T.P. Niesen, H. Tew, J. Bill, F. Aldinger: J. Mater. Chem. 12 (2002) 1597.10.1039/b109460bSuche in Google Scholar

[11] R.C. Hoffmann, L.P.H. Jeurgens, S.Wildhack, J. Bill, F. Aldinger: Chem. Mater. 16 (2004) 4199.10.1021/cm040178aSuche in Google Scholar

[12] S. Supothina, M.R. De Guire: Thin Solid Films 371 (2000) 1.10.1016/S0040-6090(00)00989-5Suche in Google Scholar

[13] S. Supothina, M.R. De Guire, A.H. Heuer: J. Am. Ceram. Soc. 86 (2003) 2074.10.1111/j.1151-2916.2003.tb03612.xSuche in Google Scholar

[14] N. Shirahata, W. Shin, N. Murayama, A. Hozumi, Y. Yokogawa, T. Kameyama, Y. Masuda, K. Koumoto: Adv. Func. Mater. 14 (2004) 580.10.1002/adfm.200305060Suche in Google Scholar

[15] N. Shirahata, Y. Sakka, T. Uchikoshi, A. Hozumi: J. Vac. Sci. Technol. A 23 (2005) 1146.10.1116/1.1927537Suche in Google Scholar

[16] K. Koumoto, S. Seo, T. Sugiyama, W.S. Seo, W.J. Dressick: Chem. Mater. 11 (1999) 2305.10.1021/cm990223sSuche in Google Scholar

[17] Q. Tang, W. Zhou, W. Zhang, S. Ou, K. Jiang, W. Yu, Y. Qian: Cryst. Growth Des. 5 (2005) 147.10.1021/cg049914dSuche in Google Scholar

[18] H. Cao, X. Qiu, Y. Liang, Q. Zhu, M. Zhao: Appl. Phys. Lett. 83 (2003) 761.10.1063/1.1596372Suche in Google Scholar

[19] Q. Wan, Z.T. Song, S.L. Feng, T.H. Wang: Appl. Phys. Lett. 85 (2004) 4759.10.1063/1.1808877Suche in Google Scholar

[20] H. Zhou, W. Cai, L. Zhang: Appl. Phys. Lett. 75 (1999) 495.10.1063/1.124427Suche in Google Scholar

[21] C. Liang, G. Meng, Y. Lei, F. Phillipp, L. Zhang: Adv. Mater. 13 (2001) 1330.10.1002/1521-4095(200109)13:17<1330::AID-ADMA1330>3.0.CO;2-6Suche in Google Scholar
Received: 2006-02-06
Accepted: 2006-03-04
Published Online: 2022-01-11

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  3. Evolution of C-rich SiOC ceramics
  4. Evolution of C-rich SiOC ceramics
  5. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  6. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  7. Thermodynamic modelling of the Ce–Ni system
  8. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  9. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  10. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  11. Reconstruction and structural transition at metal/diamond interfaces
  12. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  13. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  14. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  15. XRD and TEM study of NiO–LSGM reactivity
  16. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  17. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  18. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  19. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  20. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  21. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  22. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  23. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  24. The Na–H system: from first-principles calculations to thermodynamic modeling
  25. Personal
  26. Conferences
  27. Frontmatter
  28. Basic
  29. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  30. Evolution of C-rich SiOC ceramics
  31. Evolution of C-rich SiOC ceramics
  32. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  33. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  34. Thermodynamic modelling of the Ce–Ni system
  35. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  36. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  37. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  38. Reconstruction and structural transition at metal/diamond interfaces
  39. Applied
  40. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  41. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  42. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  43. XRD and TEM study of NiO–LSGM reactivity
  44. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  45. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  46. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  47. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  48. Regular Articles
  49. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  50. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  51. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  52. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  53. The Na–H system: from first-principles calculations to thermodynamic modeling
  54. Notifications
  55. Personal
  56. Conferences
https://doi.org/10.3139/ijmr-2006-0130
Schlagwörter für diesen Artikel
Indium oxide; Indium hydroxide; Thin film; Aqueous solution; Photoluminescence

Artikel in diesem Heft

  1. Frontmatter
  2. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  3. Evolution of C-rich SiOC ceramics
  4. Evolution of C-rich SiOC ceramics
  5. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  6. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  7. Thermodynamic modelling of the Ce–Ni system
  8. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  9. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  10. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  11. Reconstruction and structural transition at metal/diamond interfaces
  12. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  13. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  14. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  15. XRD and TEM study of NiO–LSGM reactivity
  16. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  17. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  18. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  19. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  20. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  21. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  22. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  23. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  24. The Na–H system: from first-principles calculations to thermodynamic modeling
  25. Personal
  26. Conferences
  27. Frontmatter
  28. Basic
  29. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  30. Evolution of C-rich SiOC ceramics
  31. Evolution of C-rich SiOC ceramics
  32. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  33. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  34. Thermodynamic modelling of the Ce–Ni system
  35. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  36. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  37. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  38. Reconstruction and structural transition at metal/diamond interfaces
  39. Applied
  40. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  41. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  42. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  43. XRD and TEM study of NiO–LSGM reactivity
  44. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  45. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  46. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  47. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  48. Regular Articles
  49. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  50. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  51. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  52. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  53. The Na–H system: from first-principles calculations to thermodynamic modeling
  54. Notifications
  55. Personal
  56. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 30.12.2025 von https://www.degruyterbrill.com/document/doi/10.3139/ijmr-2006-0130/html
Button zum nach oben scrollen