Home Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
Article
Licensed
Unlicensed Requires Authentication

Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions

  • Peter Majewski EMAIL logo
Published/Copyright: January 11, 2022
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 97 Issue 6

Abstract

The study clearly shows that different metal cations were efficiently removed from water by employing coated silica particles with SO3H-terminated functionalized surfaces. Significant amounts of Fe, Mn, Ca, Mg, Na, and K could be removed from natural water samples with different concentrations varying from 0.075 mg/l for Mn up to 12 000 mg/l for Na by stirring the functionalized silica particles in the water samples for 1 h at room temperature. ICP–MS verify the removal of the elements and ToF-SIMS analyses clearly showed the presence of the elements on the particles after the treatment procedure. The removal of the metal cations is believed to be due to electrostatic attraction of the positively charged presumably hydrolysed metal cations to the negatively charged deprotonated SO3H-groups. However, from the current study it can not be excluded that chemisorption of the cations by the SO3H-group may be possible.

Keywords: Water treatment; Functionalised surface; Iron; Manganese; Alkali elements; Alkali earth elements

Dedicated to Professor Dr. Fritz Aldinger on the occasion of his 65th birthday

Peter Majewski University of South Australia Mawson Lakes Blvd. Mawson Lakes, SA 5095, Australia Tel.: +61 88 3023 3162 Fax: +61 88 3023 3683

  1. The authors would like to thank BioInnovation SA for financial support of the studies.

References

[1] N. Balachander, C.N. Sukenik: Langmuir 6 (1990) 1627.10.1021/la00101a001Search in Google Scholar

[2] R.J. Collins, C.N. Sukenik: Langmuir 11 (1995) 2324.10.1021/la00006a078Search in Google Scholar

[3] G. Kataby, T. Prozoroc, Y. Koltypin, H. Cohen, C.N. Sukenik, A. Ulman, A. Gedanken: Langmuir 13 (1997) 6151.10.1021/la960929qSearch in Google Scholar

[4] F. Schreiber: Progress in Surface Science 65 (2000) 151.10.1016/S0079-6816(00)00024-1Search in Google Scholar

[5] U. Sampathkumaran, M.R. DeGuire: Advanced Engineering Materials 3 (2001) 401.10.1002/1527-2648(200106)3:6<401::AID-ADEM401>3.0.CO;2-LSearch in Google Scholar

[6] D.P. Liu, P. Majewski, B.K. O’Neill, Y. Ngothai, C.B. Colby: Biomaterials, in print.Search in Google Scholar

[7] J.R. Hansen, Functional Group Chemistry, The Royal Society of Chemistry, 2001, Cambridge, U.K.Search in Google Scholar

[8] M.R. De Guire, T. Niesen, S. Supothina, J.Wolff, J. Bill, C.N. Sukenik, F. Aldinger, A.H. Heuer, M. Ruehle: Zeitschrift für Metallkunde 89 (1998) 758.Search in Google Scholar

[9] J. Bill, R.C. Hoffmann, T.M. Fuchs, F. Aldinger: Zeitschrift fuer Metallkunde 93 (2002) 478.10.3139/146.020478Search in Google Scholar

[10] H. Shin, R.J. Collins, M.R. DeGuire, A.H. Heuer, C.N. Sukenik: J. Mater. Res. 10 (1995) 698.10.1557/JMR.1995.0692Search in Google Scholar

[11] H. Shin, R.J. Collins, M.R. DeGuire, A.H. Heuer, C.N. Sukenik: J. Mater. Res. 10 (1995) 703.10.1557/JMR.1995.0699Search in Google Scholar

[12] T.P. Niesen, J. Bill, F. Aldinger: Chem. Mater. 13 (2001) 1559.10.1021/cm001227wSearch in Google Scholar

[13] J. Liu, Y. Shin, Z. Nie, J.H. Chang, L.-Q.Wang, G.E. Fryxell, W.D. Samuels, J. Gregory, G.J. Exarhos: J. Phys. Chem. A 104 (2000) 8328.10.1021/jp0009812Search in Google Scholar

[14] W. Yantasee, Y. Lin, G.E. Fryxell, B. Busche, J.C. Birnbaum: Separation Sci. & Technol. 38 (2003) 3809.10.1081/SS-120024232Search in Google Scholar

[15] G.E. Fryxell, Y. Lin, S. Fiskum, J.C. Birnbaum, H. Wu, K. Kemner, S. Kelley: Environ. Sci. Technol. 39 (2005) 1324.10.1021/es049201jSearch in Google Scholar

[16] G.E. Fryxell, H.Wu, Y. Lin,W.J. Shaw, J.C. Birnbaum, J.C. Linehan, Z. Nie, K. Kemner, S. Kelly: J. Mater. Chem. 14 (2004) 3356.10.1039/b408181aSearch in Google Scholar

[17] S.V. Mattigod, X. Feng, G.E. Fryxell, J. Liu, M. Gong: Separation Sci. & Technol. 34 (1999) 2329.10.1081/SS-100100775Search in Google Scholar

[18] M.L. Taylor, G.E. Morris, R.St.C. Smart: J. Coll. Interfac. Sci. 262 (2001) 88.Search in Google Scholar

[19] C.E. Baes, Jr., R.E. Mesmer: The Hydrolysis of Cations, Krieger Publishing Company, Malabar, Fl, USA (1986).Search in Google Scholar

[20] J.-J. Shyue, M.R. De Guire, T. Nakanishi, Y. Masuda, K. Koumoto, C.N. Sukenik: Langmuir 20 (2004) 8693.10.1021/la049247qSearch in Google Scholar PubMed

Received: 2005-11-01
Accepted: 2006-02-22
Published Online: 2022-01-11

© 2006 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  3. Evolution of C-rich SiOC ceramics
  4. Evolution of C-rich SiOC ceramics
  5. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  6. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  7. Thermodynamic modelling of the Ce–Ni system
  8. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  9. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  10. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  11. Reconstruction and structural transition at metal/diamond interfaces
  12. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  13. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  14. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  15. XRD and TEM study of NiO–LSGM reactivity
  16. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  17. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  18. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  19. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  20. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  21. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  22. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  23. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  24. The Na–H system: from first-principles calculations to thermodynamic modeling
  25. Personal
  26. Conferences
  27. Frontmatter
  28. Basic
  29. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  30. Evolution of C-rich SiOC ceramics
  31. Evolution of C-rich SiOC ceramics
  32. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  33. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  34. Thermodynamic modelling of the Ce–Ni system
  35. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  36. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  37. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  38. Reconstruction and structural transition at metal/diamond interfaces
  39. Applied
  40. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  41. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  42. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  43. XRD and TEM study of NiO–LSGM reactivity
  44. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  45. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  46. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  47. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  48. Regular Articles
  49. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  50. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  51. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  52. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  53. The Na–H system: from first-principles calculations to thermodynamic modeling
  54. Notifications
  55. Personal
  56. Conferences
https://doi.org/10.1515/ijmr-2006-0126
Keywords for this article
Water treatment; Functionalised surface; Iron; Manganese; Alkali elements; Alkali earth elements

Articles in the same Issue

  1. Frontmatter
  2. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  3. Evolution of C-rich SiOC ceramics
  4. Evolution of C-rich SiOC ceramics
  5. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  6. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  7. Thermodynamic modelling of the Ce–Ni system
  8. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  9. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  10. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  11. Reconstruction and structural transition at metal/diamond interfaces
  12. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  13. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  14. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  15. XRD and TEM study of NiO–LSGM reactivity
  16. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  17. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  18. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  19. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  20. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  21. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  22. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  23. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  24. The Na–H system: from first-principles calculations to thermodynamic modeling
  25. Personal
  26. Conferences
  27. Frontmatter
  28. Basic
  29. Microstructure and mechanical behavior of Pt-modified NiAl diffusion coatings
  30. Evolution of C-rich SiOC ceramics
  31. Evolution of C-rich SiOC ceramics
  32. Nanostructured SiC/BN/C ceramics derived from mixtures of B3N3H6 and [HSi(Me)C≡C]n
  33. Thermodynamic analysis of structural transformations induced by annealing of amorphous Si–C–N ceramics derived from polymer precursors
  34. Thermodynamic modelling of the Ce–Ni system
  35. Thermodynamic assessment of the Ce–O system in solid state from 60 to 67 mol.% O
  36. Phase transformations of iron nitrides at low temperatures (< 700 K) – application of mechanical mixtures of powders of nitrides and iron
  37. Effect of organic self-assembled monolayers on the deposition and adhesion of hydroxyapatite coatings on titanium
  38. Reconstruction and structural transition at metal/diamond interfaces
  39. Applied
  40. Microstructure, hardness, and fracture toughness evolution of hot-pressed SiC/Si3N4 nano/micro composite after high-temperature treatment
  41. High-temperature plasticity of SiC sintered with Lu2O3-AlN additives
  42. Interaction of functionalised surfaces on silica with dissolved metal cations in aqueous solutions
  43. XRD and TEM study of NiO–LSGM reactivity
  44. Microstructure and dielectric properties of nanoscale oxide layers on sintered capacitor-grade niobium and V-doped niobium powder compacts
  45. Knudsen effusion mass spectrometric studies of the Al–Ni system: Thermodynamic properties over {AlNi + Al3Ni2} and {Al3Ni2 + Al3Ni}
  46. Aqueous solution deposition of indium hydroxide and indium oxide columnar type thin films
  47. Thermodynamic properties of B2-AlFeNi alloys: modelling of the B2-AlFe and B2-AlNi phases
  48. Regular Articles
  49. Kinetics of precipitate formation in (TixWyCrz)B2 solid solutions: influence of Cr concentration and Co impurities
  50. On the mechanisms governing the texture and microstructure evolution during static recrystallization and grain growth of low alloyed zirconium sheets (Zr702)
  51. Out-of-pile chemical compatibility of Pb–Bi eutectic alloy with Graphite
  52. Microstructural characterisation of a Co–Cr–Mo laser clad applied on railway wheels
  53. The Na–H system: from first-principles calculations to thermodynamic modeling
  54. Notifications
  55. Personal
  56. Conferences
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 25.10.2025 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0126/html
Scroll to top button