Home Phase equilibria of the Ni–Sb–Zn system at 600 °C
Article
Licensed
Unlicensed Requires Authentication

Phase equilibria of the Ni–Sb–Zn system at 600 °C

  • Yuliang Zhao , Zhongxi Zhu , Yi Xie and Fucheng Yin
Published/Copyright: September 29, 2016
Become an author with De Gruyter Brill
Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 107 Issue 10

Abstract

The phase equilibria of the Ni–Sb–Zn ternary system at 600 °C have been experimentally investigated using X-ray diffraction and scanning electron microscopy coupled with energy/wavelength dispersive X-ray spectroscopy. Four ternary compounds, NiSbZn (τ1), Ni2SbZn2 (τ2), Ni3Sb2Zn (τ3) and Ni4.6SbZn (τ4), were identified and thirteen three-phase regions were confirmed in the present work. Moreover, the maximum solubilities of Zn in NiSb and NiSb2 were determined to be 2.0 and 1.0 at.% at 600 °C, respectively; and those of Sb in β1 and γ were measured up to 11.8 and 5.3 at.%, respectively.

Keywords: Ni–Sb–Zn; Phase diagram; Intermetallic compounds; Ternary system
*Correspondence address, Professor ZhongXi Zhu, School of Mechanical Engineering, Xiangtan University, Xiangtan 411105, Hunan, P. R. China, Tel.: +86-731-58292210, Fax: +86-731-58292210, E-mail:

References

[1] R.W.Sandelin: Wire Wire Prod.15 (1940) 655.Search in Google Scholar

[2] N.Y.Tang: J. Phase Equilib. Diffus.29 (2008) 337. 10.1007/s11669-008-9321-0Search in Google Scholar

[3] Z.W.Chen, N.F.Kennon, J.B.See, M.A.Barter: JOM44 (1992) 22. 10.1007/BF03222746Search in Google Scholar

[4] J.Zervoudis, G.Anderson: 6th Asia Pacific General Galvanizing Conference, Cairns, Australia (2005) 1.Search in Google Scholar

[5] S.Chang, J.C.Shin: Galvatech 95 Conf. Proc., Chicago, Illinois, USA (1995) 783.Search in Google Scholar

[6] N.Pistofidis, G.Vourlias, S.Konidaris, E.Pavlidou, A.Stergiou, G.Stergioudis: Mater. Lett.60 (2006) 786. 10.1016/j.matlet.2005.10.013Search in Google Scholar

[7] N.I.Sax: Dangerous Properties of Industrial Materials, VNR, New York (1979).Search in Google Scholar

[8] M.Dutta, A.Mukhopadhyay, S.Chakrabarti: ISIJ Int.44 (2004) 129. 10.2355/isijinternational.44.129Search in Google Scholar

[9] S.Chang, J.C.Shin: Corros. Sci.36 (1994) 1425. 10.1016/0010-938X(94)90190-2Search in Google Scholar

[10] J.Strutzenberger, J.Faderl: Metall. Mater. Trans. A29 (1998) 631. 10.1007/s11661-998-0144-8Search in Google Scholar

[11] S.Chang, J.C.Shin: Galvatech 95th Conf. Proc., Chicago, Il, USA (1995) 783.Search in Google Scholar

[12] J.Foct, P.Perrot, G.Reumont: Scr. Metall. Mater.28 (1993) 1195. 10.1016/0956-716X(93)90453-YSearch in Google Scholar

[13] T.Hou, Z.X.Zhu, Y.L.Zhao, F.C.Yin, Z.Li, Y.X.Liu: J. Phase Equilib.34 (2013) 188. 10.1007/s11669-013-0223-4Search in Google Scholar

[14] Z.X.Zhu, X.P.Su, F.C.Yin, H.Tu, C.J.Wu: J. Alloys Compd.490 (2010) 541. 10.1016/j.jallcom.2009.10.077Search in Google Scholar

[15] X.P.Su, Z.X.Zhu, C.J.Wu, F.C.Yin, J.H.Wang, Z.Li: Int. J. Mater. Res.102 (2011) 241. 10.3139/146.110483Search in Google Scholar

[16] S.Y.Peng, M.L.Chen, Z.X.Zhu, W.B.Ma, X.M.Wang, F.C.Yin: Int. J. Mater. Res.107 (2016) 340. 10.3139/146.111349Search in Google Scholar

[17] S.Y.Peng, Z.X.Zhu, W.B.Ma, Q.L.Xu, M.L.Chen, F.C.Yin: Int. J. Mater. Res.107 (2016) 21. 10.3139/146.111317Search in Google Scholar

[18] C.Xu, F.C.Yin, M.X.Zhao, Y.X.Liu, X.P.Su: J. Alloys Compd.506 (2010) 125. 10.1016/j.jallcom.2010.06.153Search in Google Scholar

[19] Y.L.Zhao, Z.X.Zhu, F.C.Yin, Z.H.Long, Y.Wu: J. Phase Equilib.35 (2014) 186. 10.1007/s11669-014-0280-3Search in Google Scholar

[20] P.Nash, Y.Y.Pan: Phase diagrams of binary nickel alloys: ASM International, Materials Park, OH, USA (1991).Search in Google Scholar

[21] K.Tamaru, A.Osawa: Sci. Rep. Tohoku Imp. Univ.23 (1935) 794.Search in Google Scholar

[22] A.Johansson, H.Ljung, S.Westman: Acta Chem. Scand.22 (1968) 2743. 10.3891/acta.chem.scand.22-0389Search in Google Scholar

[23] Z.Cao, Y.Takaku, I.Ohnuma, R.Kainuma, H.Zhu, K.Ishida: Rare Met.27 (2008) 384. 10.1007/s11664-007-0344-9Search in Google Scholar

[24] P.Wodniecki, M.Uhrmacher: Appl. Phys. A57 (1993) 469. 10.1007/BF00331787Search in Google Scholar

[25] P.Feschotte, D.Lorin: J. Less Common Met.155 (1989) 255. 10.1016/0022-5088(89)90235-XSearch in Google Scholar

[26] F.Adjadj, E.Belbacha, M.Bouharkat, A.Kerboub: J. Alloys Compd.419 (2006) 267. 10.1016/j.jallcom.2005.09.068Search in Google Scholar

[27] X.J.Liu, C.P.Wang, I.Ohnuma, R.Kainuma, K.Ishida: J. Phase Equilib. Diffus.21 (2000) 432. 10.1361/105497100770339608Search in Google Scholar

[28] H.Okamoto: J. Phase Equilib. Diffus.29 (2008) 290. 10.1007/s11669-008-9315-ySearch in Google Scholar

[29] I.Chumak, V.Pavlyuk: J. Alloys Compd.367 (2004) 85. 10.1016/j.jallcom.2003.08.017Search in Google Scholar

[30] D.Minić, M.Kolarević, D.Manasijević, A.Todorović, D.Živković, N.Talijan: Mater. Chem. Phys.132 (2012) 402. 10.1016/j.matchemphys.2011.11.045Search in Google Scholar

[31] D.Schiferl: Rev. Sci. Instrum.48 (1977) 24. 10.1063/1.1134861Search in Google Scholar

[32] H.E.Swanson, R.K.Fuyat, G.M.Ugrinic, N.T.Gilfrich: National Bureau of Standards (1953).Search in Google Scholar

[33] T.B.Massalski: Binary Alloy Phase Diagrams, ASM International, Metals Park, Ohio, USA (1990).Search in Google Scholar

[34] K.P.Gupta: J. Phase Equilib.21 (2000) 472. 10.1361/105497100770339743Search in Google Scholar

[35] X.P.Su, N.Y.Tang, J.Toguri: Can. Metall. Q.70 (2001) 377. 10.1179/cmq.2001.40.3.377Search in Google Scholar

[36] I.Chumak, V.Pavlyuk, G.Dmytriv, J.Stępień-Damm: J. Alloys Compd.307 (2000) 223. 10.1016/S0925-8388(00)00891-4Search in Google Scholar

Received: 2016-05-08
Accepted: 2016-06-20
Published Online: 2016-09-29
Published in Print: 2016-10-14

© 2016, Carl Hanser Verlag, München

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. A metastable phase diagram for the dynamic transformation of austenite at temperatures above the Ae3
  5. Experimental investigation of phase equilibria in the Co–Ni–Zr ternary system
  6. Phase equilibria of the Ni–Sb–Zn system at 600 °C
  7. High frequency cycling behaviour of three AZ magnesium alloys – microstructural characterisation
  8. Influence of auxetic foam in quasi-static axial crushing
  9. Electrochemical behaviour of iron and AISI 304 stainless steel in simulated acid rain solution
  10. Mechanochemical synthesis of CaMoO4 nanoparticles: kinetics and characterization
  11. Synthesis and characterization of iron oxide nanoparticles prepared hydrothermally at different reaction temperatures and pH
  12. Influence of SPS parameters on the density and hardness of zinc selenide
  13. Investigation into the kinetic behavior of molten aluminum pressureless infiltration into SiC preforms
  14. Review
  15. Centrifugal casting technique baseline knowledge, applications, and processing parameters: overview
  16. People
  17. Prof. Dr.-Ing. Jürgen Hirsch on the occasion of his 65th birthday
  18. DGM News
  19. DGM News
https://doi.org/10.3139/146.111419
Keywords for this article
Ni–Sb–Zn; Phase diagram; Intermetallic compounds; Ternary system

Articles in the same Issue

  1. Contents
  2. Contents
  3. Original Contributions
  4. A metastable phase diagram for the dynamic transformation of austenite at temperatures above the Ae3
  5. Experimental investigation of phase equilibria in the Co–Ni–Zr ternary system
  6. Phase equilibria of the Ni–Sb–Zn system at 600 °C
  7. High frequency cycling behaviour of three AZ magnesium alloys – microstructural characterisation
  8. Influence of auxetic foam in quasi-static axial crushing
  9. Electrochemical behaviour of iron and AISI 304 stainless steel in simulated acid rain solution
  10. Mechanochemical synthesis of CaMoO4 nanoparticles: kinetics and characterization
  11. Synthesis and characterization of iron oxide nanoparticles prepared hydrothermally at different reaction temperatures and pH
  12. Influence of SPS parameters on the density and hardness of zinc selenide
  13. Investigation into the kinetic behavior of molten aluminum pressureless infiltration into SiC preforms
  14. Review
  15. Centrifugal casting technique baseline knowledge, applications, and processing parameters: overview
  16. People
  17. Prof. Dr.-Ing. Jürgen Hirsch on the occasion of his 65th birthday
  18. DGM News
  19. DGM News
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2025 De Gruyter Brill
Downloaded on 16.11.2025 from https://www.degruyterbrill.com/document/doi/10.3139/146.111419/html
Scroll to top button