A metastable phase diagram for the dynamic transformation of austenite at temperatures above the Ae₃

Artikel in diesem Heft

1. Contents
2. Contents
3. Original Contributions
4. A metastable phase diagram for the dynamic transformation of austenite at temperatures above the Ae₃
5. Experimental investigation of phase equilibria in the Co–Ni–Zr ternary system
6. Phase equilibria of the Ni–Sb–Zn system at 600 °C
7. High frequency cycling behaviour of three AZ magnesium alloys – microstructural characterisation
8. Influence of auxetic foam in quasi-static axial crushing
9. Electrochemical behaviour of iron and AISI 304 stainless steel in simulated acid rain solution
10. Mechanochemical synthesis of CaMoO₄ nanoparticles: kinetics and characterization
11. Synthesis and characterization of iron oxide nanoparticles prepared hydrothermally at different reaction temperatures and pH
12. Influence of SPS parameters on the density and hardness of zinc selenide
13. Investigation into the kinetic behavior of molten aluminum pressureless infiltration into SiC preforms
14. Review
15. Centrifugal casting technique baseline knowledge, applications, and processing parameters: overview
16. People
17. Prof. Dr.-Ing. Jürgen Hirsch on the occasion of his 65^th birthday
18. DGM News
19. DGM News