Startseite Deformation mechanisms in yttria-stabilized cubic zirconia single crystals
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Deformation mechanisms in yttria-stabilized cubic zirconia single crystals

Paper presented at the Second International Workshop “Correlation of Microstructure – Properties and Multiscale Modelling of Plasticity”, Fuenteheridos, Huelva, Spain, June 17–21, 2009
  • Ángela Gallardo-López , Diego Gómez-García und Arturo Domínguez-Rodríguez
Veröffentlicht/Copyright: 31. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 10

Abstract

This work attempts to give a unified picture of the microscopic mechanisms which control the plastic deformation in yttria-stabilized cubic zirconia single crystals, particularly for the soft orientation (uniaxial compression along the crystallographic axis) at low, intermediate and high temperatures while also reviewing and updating the existing data for different yttria contents (9.4 – 32 mol.%). The controlling deformation mechanisms are: internal friction within the crystal lattice (Peierls mechanism at low temperatures), pinning of dislocations by localized obstacles and long-range interaction between dislocations (intermediate temperatures) and dislocation viscous glide and climb (recovery creep) at higher temperatures. New aspects of the Portevin–le Chatelier phenomenon during viscous glide, due to the pinning and unpinning of dislocations from their defect clouds (yttrium substitutional atoms), are included.

Keywords: Yttria-stabilized cubic zirconia; Single crystals; Creep; Deformation mechanisms; Portevin–le Chatelier
* Correspondence address, Dr. Ángela Gallardo López Universidad de Sevilla Dpto. Física de la Materia Condensada Apdo 1065, 41080 Sevilla, Spain Tel: +34 954 55 44 48 Fax: +34 954 55 28 70 E-mail:

References

[1] A.Domínguez-Rodríguez, K.P.D.Lagerlöf, A.H.Heuer: J. Amer. Ceram. Society69 (1986) 281. 10.1111/j.1151-2916.1986.tb07427.xSuche in Google Scholar

[2] P.Teracher, H.Garem, J.Rabier, in: D.G.Brandon, R.Chaim, A.Rosen (Eds.), Strength of Metalls and Alloys, 1 (1991) 217.Suche in Google Scholar

[3] P.Teracher: Ph.D. Thesis, Poitiers (1990).Suche in Google Scholar

[4] D.S.Cheong, A.Domínguez-Rodríguez, A.H.Heuer: Phil. Mag. A63-3, (1991) 377.10.1080/01418619108213886Suche in Google Scholar

[5] A.MuñozA.Domínguez-Rodríguez, J.Castaing: Rad. Effects and Defects in Solids137 (1995) 213.Suche in Google Scholar

[6] A.Domínguez-Rodríguez, A.H.Heuer, J.Castaing: Rad. Effects and Defects in Solids119–121 (1991) 759.Suche in Google Scholar

[7] P.Teracher, H.Garem, J.Rabier, in: D.G.Brandon, R.Chaim, A.Rosen (Eds.) Strength of Metalls and Alloys, Freund publ.London (1991) 217.Suche in Google Scholar

[8] B.Baufeld, B.V.Petukhov, M.Bartsch, U.Messerschmidt: Acta Metall. Mater.46 (1998) 3077.Suche in Google Scholar

[9] B.Baufeld, M.Bartsch, U.Messerschmidt, D.Baither: Acta Metall. Mater.43-5 (1995) 1925.10.1016/0956-7151(94)00400-CSuche in Google Scholar

[10] U.Messerschmidt, B.Baufeld, K.J.McClellan, A.H.Heuer: Acta Metall. Mater.43-5 (1995) 1917.10.1016/0956-7151(94)00399-3Suche in Google Scholar

[11] D.Baither, B.Baufeld, U.Messerschmidt, M.Bartsch: Mater. Sci. Eng. A233 (1997) 75. 10.1016/S0921-5093(97)00051-8Suche in Google Scholar

[12] A.Gallardo-LópezD.Gómez-Garcí, A.Domínguez-Rodríguez, L.P.Kubin: Scripta Mater.51 (2004) 203.10.1016/j.scriptamat.2004.04.018Suche in Google Scholar

[13] A.Gallardo-LópezD.Gómez-Garcí, A.Domínguez-Rodríguez, L.P.Kubin: Bol. Soc. Esp. Ceram. V.44–5 (2005) 294.Suche in Google Scholar

[14] A.Tikhonovsky, M.Bartsch, U.Messerschmidt: Phys. Stat. Sol. (a)201-1 (2004) 46.Suche in Google Scholar

[15] D.Gómez-Garcí, J.Martínez-Fernández, A.Domínguez-Rodríguez, P.Eveno, J.Castaing: Acta Mater.44 (1996) 991.10.1016/1359-6454(95)00254-5Suche in Google Scholar

[16] D.Gómez-Garcí, J.Martínez-Fernández, A.Domínguez-Rodríguez, J.Castaing: J. Am. Ceram. Soc.80-7 (1997) 1668.Suche in Google Scholar

[17] A.Gallardo-LópezD.Gómez-Garcí, A.Domínguez-Rodríguez: J. Eur. Ceram. Soc.23/13 (2003) 2183. 10.1016/S0955-2219(03)00047-5Suche in Google Scholar

[18] Á.Gallardo-LópezD.Gómez-Garcí, J.Martínez-Fernández, A.Domínguez-Rodríguez: Scripta Mater.48 (2003) 1295.10.1016/S1359-6462(03)00025-3Suche in Google Scholar

[19] K.J.McClellan, A.H.Heuer, L.P.Kubin: Acta Metall.44 (1996) 2651.Suche in Google Scholar

[20] Y.Estrin, L.P.Kubin, in: H.B.Mülhaus (Ed.), Continuum models for materials with micro-structure, Wiley and Sons, New York (1995) 395.Suche in Google Scholar

Received: 2009-11-6
Accepted: 2010-5-7
Published Online: 2013-05-31
Published in Print: 2010-10-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial October 2010
  5. History
  6. Interactions between dislocations and interfaces – consequences for metal and ceramic plasticity
  7. Deformation mechanisms in yttria-stabilized cubic zirconia single crystals
  8. Basic
  9. Superplasticity in nanocrystalline ceramics: pure grain boundary phenomena or not?
  10. Thermodynamic assessment of the Mn–Ni–O system
  11. Assessment of niobium segregation energy in migrating ferrite/austenite phase interfaces
  12. In-situ synthesis and characterization of Al2O3 nanostructured whiskers in Ti–Al intermetallic matrix composites
  13. Texture, structure and properties of Ni-based binary alloy tapes for HTS substrates
  14. Microstructure, texture, grain boundary characteristics and mechanical properties of a cold rolled and annealed ferrite–bainite dual phase steel
  15. Applied
  16. Microstructure and mechanical properties of differently extruded AZ31 magnesium alloy
  17. The role of talc in preparing steatite slurries suitable for spray-drying
  18. Preparation and evaluation of chitosan-gelatin composite scaffolds modified with chondroitin-6-sulphate
  19. Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents
  20. Controlled synthesis of prussian blue nanoparticles based on polymyxin B/sodium bis(2-ethylhexyl)sulfosuccinate/water/isooctane reverse microemulsion for glucose biosensors
  21. The melting diagram of the Ti–Dy–Sn system below 40 at.% Sn
  22. Preparation and photocatalytic properties of TiO2 film produced via spin coating
  23. DGM News
  24. Personal
https://doi.org/10.3139/146.110399
Schlagwörter für diesen Artikel
Yttria-stabilized cubic zirconia; Single crystals; Creep; Deformation mechanisms; Portevin–le Chatelier

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Editorial
  4. Editorial October 2010
  5. History
  6. Interactions between dislocations and interfaces – consequences for metal and ceramic plasticity
  7. Deformation mechanisms in yttria-stabilized cubic zirconia single crystals
  8. Basic
  9. Superplasticity in nanocrystalline ceramics: pure grain boundary phenomena or not?
  10. Thermodynamic assessment of the Mn–Ni–O system
  11. Assessment of niobium segregation energy in migrating ferrite/austenite phase interfaces
  12. In-situ synthesis and characterization of Al2O3 nanostructured whiskers in Ti–Al intermetallic matrix composites
  13. Texture, structure and properties of Ni-based binary alloy tapes for HTS substrates
  14. Microstructure, texture, grain boundary characteristics and mechanical properties of a cold rolled and annealed ferrite–bainite dual phase steel
  15. Applied
  16. Microstructure and mechanical properties of differently extruded AZ31 magnesium alloy
  17. The role of talc in preparing steatite slurries suitable for spray-drying
  18. Preparation and evaluation of chitosan-gelatin composite scaffolds modified with chondroitin-6-sulphate
  19. Influence of volume fraction of martensite on the work hardening behaviour of two dual-phase steels with high and low silicon contents
  20. Controlled synthesis of prussian blue nanoparticles based on polymyxin B/sodium bis(2-ethylhexyl)sulfosuccinate/water/isooctane reverse microemulsion for glucose biosensors
  21. The melting diagram of the Ti–Dy–Sn system below 40 at.% Sn
  22. Preparation and photocatalytic properties of TiO2 film produced via spin coating
  23. DGM News
  24. Personal
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 17.11.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110399/pdf?lang=de
Button zum nach oben scrollen