Startseite Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets

  • R. Ravindran , K. Manonmani und R. Narayanasamy
Veröffentlicht/Copyright: 18. Mai 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 101 Heft 7

Abstract

In this work, forming and fracture limit diagrams have been experimentally evaluated for aluminium 5052 alloy sheet annealed at four different temperatures namely 200°C, 250°C, 300°C and 350°C. With the help of these diagrams, the safe range which avoids necking and fracture during forming of aluminium 5052 alloy sheets was examined and the effect of annealing temperature on this range and other parameters namely microstructure, tensile properties and formability parameters were studied. The forming limit diagrams of aluminium 5052 alloy sheets annealed under different temperatures were also examined with respect to the crystallographic texture point of view. The crystallographic textures were then correlated with normal anisotropy of the sheet metal. It was found that the formability of aluminium 5052 alloy annealed at 350°C possessed good formability, optimal texture and high normal anisotropy value.

Keywords: Forming; Fracture; Annealing; Crystallographic texture
∗ Prof. R. Ravindran, Department of Mechanical Engineering, Dr. Mahalingam College of Engineering & Technology, Udumalai road, Pollachi, Tamil Nadu, India-642 003, Tel.: +91 422 2604567, E-mail:

References

[1] R.Nikhil, T.Raghuram, B.Vamsi Krishna, K.Prasad Rao, P.Venugopal: Mater. Sci. Eng. A398 (2005) 246. 10.1016/j.msea.2005.03.026Suche in Google Scholar

[2] H.Takuda, N.Yamazaki, N.Hatta, S.Kikuchi: J. Mater. Sci.30 (1995) 957. 10.1007/BF01178430Suche in Google Scholar

[3] D.Ravi Kumar, K.Swaminathan: Mater. Sci. Technol.15 (1999) 1241.Suche in Google Scholar

[4] R.Narayanasamy, R.Sowerby: J. Mater. Proc. Tech.39 (1993) 43. 10.1016/0924-0136(93)90007-SSuche in Google Scholar

[5] R.Narayanasamy, R.Sowerby: J. Mater. Proc. Tech.41 (1994) 275. 10.1016/0924-0136(94)90166-XSuche in Google Scholar

[6] M.Karima, R.Sowerby: Report No.144, Faculty of Engineering, McMaster University, Hamilton, Ontario, Canada (1980).Suche in Google Scholar

[7] S.Di, P.F.Thomson: J. Testing Eval. JTEVA25 (1997) 74.10.1520/JTE11327JSuche in Google Scholar

[8] J.Wang, X.Wu, P.F.Thomson, A.Flitman: J. Mater. Proc. Tech.105 (2000) 215. 10.1016/S0924-0136(00)00534-3Suche in Google Scholar

[9] K.Youngsuk, S.Youngjin: J. Mater. Proc. Tech.97 (2000) 88. 10.1016/S0924-0136(99)00346-5Suche in Google Scholar

[10] S.P.Keeler: Sheet Met. Ind.42 (1965) 683.Suche in Google Scholar

[11] G.M.Goodwin: Metall. Italiana60 (1968) 764.Suche in Google Scholar

[12] S.S.Hecker: Sheet Met. Ind.53 (1975) 671.10.2307/2576512Suche in Google Scholar

[13] M.C.Butuc, J.J.Gracio, A. Baratada Rocha: J. Mater. Process. Tech.142 (2003) 714. 10.1016/S0924-0136(03)00813-6Suche in Google Scholar

[14] A.F.Avila, E.L.S.Vieira: J. Mater. Process. Technol.141 (2003) 101. 10.1016/S0924-0136(03)00162-6Suche in Google Scholar

[15] C.L.Chow, M.Jie: Int. J. Mech. Sci.46 (2004) 99. 10.1016/j.ijmecsci.2004.02.003Suche in Google Scholar

[16] R.Narayanasamy, Ph.D. Thesis, Drawability of sheet metals through Conical and Tractrix dies, Regional Engineering College, Tiruchirappalli-620 015, India (1992).Suche in Google Scholar

[17] L.S.Toth, J.Hirsch, P.Van Houtte: Int. J. Mech. Sci.38 (1996) 1117. 10.1016/0020-7403(95)00110-7Suche in Google Scholar

[18] P.D.Wu, S.R.MacEwen, D.J.Lloyd, K.W.Neale: Mater. Sci. Eng. A364 (2004) 182. 10.1016/j.msea.2003.08.020Suche in Google Scholar

[19] B.Bacroix, Th.Chauveau, J.Ferreira Duarte, A. Baratade Rocha, J.Gracio: The respective influences of grain size and texture on the formability of a 1050 aluminium alloy.Suche in Google Scholar

[20] M.Y.Huh, S.Y.Cho, O.Engler: Randomization of the annealing texture in aluminium 5182 sheet by cross-rolling, Mater. Sci. Eng. A315 (2001) 35. 10.1016/S0921-5093(01)01207-2Suche in Google Scholar

[21] O.Engler, J.Hirsch: Mater. Sci. Eng. A336 (2002) 49.Suche in Google Scholar

[22] R.Narayanasamy, C.Sathiyanarayanan: Report of FLD on IF steels submitted to TISCO, National Institute of Technology, Tiruchirappalli, Tamilnadu, India2004.Suche in Google Scholar

Received: 2008-9-25
Accepted: 2010-4-28
Published Online: 2013-05-18
Published in Print: 2010-07-01

© 2010, Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
https://doi.org/10.3139/146.110347
Schlagwörter für diesen Artikel
Forming; Fracture; Annealing; Crystallographic texture

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Basic
  4. Thermodynamic modeling of the Pt–Zr system
  5. Experimental investigation and thermodynamic prediction of the Ga–Sb–Sn phase equilibria
  6. Calculation of the viscosity of the liquid ternary Ag–Au–Sn system
  7. Thermophysical properties of liquid tin–bismuth alloys
  8. A comparative AFM study of carbon alloyed Mo–Se–C and W–S–C films for tribological applications
  9. Luminescence of Fe-substituted ZnWO4 powders synthesized by aqueous solution reaction
  10. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys
  11. Applied
  12. Microstructure and mechanical properties of Fe3Al–TiC composites
  13. Study of wear behaviour of ductile iron subjected to two step austempering
  14. Effect of annealing on formability and crystallographic textures of aluminium 5052 alloy sheets
  15. The use of fly ash and basaltic pumice as additives in the productionof clay fired brick in Turkey
  16. Insulation properties of bricks made with cotton and textile ash wastes
  17. Effects of homogenizing and aging treatments on the microstructure and microhardness of an Nb-silicide based ultrahigh temperature alloy
  18. Alloys with thermal expansion matching to electrolyte materials for solid oxide fuel cells
  19. Simulation-based study of the compensation coil method applied to ferrite nanometric powders
  20. DGM News
  21. Zum 75. Geburtstag von Prof. Dr.-Ing. habil. Peter Klimanek
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 28.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110347/html?lang=de
Button zum nach oben scrollen