Article
Publicly Available
Picture of the Month
Published/Copyright:
September 18, 2025
Whitewater Rafting / Wildwasserfahrt
Laser-welded aluminum EN AW-1050, longitudinal section, Kroll etching, dark field / Laserstrahlgeschweißtes Aluminium EN AW-1050, Längsschliff, Kroll-Ätzung, Dunkelfeld
Annette Lietz and Michael Kick
Technical University of Munich
TUM School of Engineering and Design
Garching b. München, Germany
Have you also made a snapshot? Send it to: pmeditor@materialography.net (don‘t forget your name and your address). Every picture that is printed will be awarded and you will receive a little present.
Haben auch Sie einen Schnappschuss? Senden Sie diesen an: pmeditor@materialography.net (mit Angabe von Namen und Adresse). Jedes abgedruckte Bild wird prämiert und Sie erhalten ein kleines Dankeschön.
Published Online: 2025-09-18
Published in Print: 2025-09-25
© 2025 Walter de Gruyter GmbH, Berlin/Boston, Germany
Articles in the same Issue
- Contents
- Editorial
- Editorial
- Evaluation of damage mechanisms in full-forward rod extruded AISI 5115 steel by AI-based image segmentation
- A roll-headed pin from Getzersdorf, Austria, opens up interesting questions about iron metallurgy in the Hallstatt period
- Magneto-optical Kerr effect analysis of strain-induced martensite formation during flow forming of metastable austenitic steel AISI 304L
- Materials scientific challenges of a circular economy of high-alloy tool steels
- Cavitation-induced damage on a ship propeller’s Kort nozzle made of AISI 316L and investigation of the near-surface microstructural changes
- Preparation of aluminum thin films and laminates
- Preparation and microstructural examination of additively manufactured alloys 316L and 17-4PH
- Results of a round robin test on grain boundary determination by image analysis in the DGM working group ‘Quantitative Structural Analysis’
- Deep learning-based precipitate quantification in STEM images of complex steel microstructures
- A bronze fibula foot from the Roman Carnuntum, Lower Austria
- Optimization of preparation methods for EBSD analysis of highly metastable austenitic steels
- Picture of the Month
- Picture of the Month
- People
- Interview with Gaby Ketzer-Raichle on the occasion of the new edition of “Schumann Metallography”, published by Heinrich Oettel and Gaby Ketzer-Raichle
- News
- News
- Meeting Diary
- Meeting Diary
Articles in the same Issue
- Contents
- Editorial
- Editorial
- Evaluation of damage mechanisms in full-forward rod extruded AISI 5115 steel by AI-based image segmentation
- A roll-headed pin from Getzersdorf, Austria, opens up interesting questions about iron metallurgy in the Hallstatt period
- Magneto-optical Kerr effect analysis of strain-induced martensite formation during flow forming of metastable austenitic steel AISI 304L
- Materials scientific challenges of a circular economy of high-alloy tool steels
- Cavitation-induced damage on a ship propeller’s Kort nozzle made of AISI 316L and investigation of the near-surface microstructural changes
- Preparation of aluminum thin films and laminates
- Preparation and microstructural examination of additively manufactured alloys 316L and 17-4PH
- Results of a round robin test on grain boundary determination by image analysis in the DGM working group ‘Quantitative Structural Analysis’
- Deep learning-based precipitate quantification in STEM images of complex steel microstructures
- A bronze fibula foot from the Roman Carnuntum, Lower Austria
- Optimization of preparation methods for EBSD analysis of highly metastable austenitic steels
- Picture of the Month
- Picture of the Month
- People
- Interview with Gaby Ketzer-Raichle on the occasion of the new edition of “Schumann Metallography”, published by Heinrich Oettel and Gaby Ketzer-Raichle
- News
- News
- Meeting Diary
- Meeting Diary
