Article
Licensed
Unlicensed
Requires Authentication
Personal
Published/Copyright:
January 21, 2022
Published Online: 2022-01-21
© 2006 Carl Hanser Verlag, München
You are currently not able to access this content.
You are currently not able to access this content.
Articles in the same Issue
- Contents
- Editorial
- Nanoindentation creep and stress relaxation tests of polycarbonate: Analysis of viscoelastic properties by different rheological models
- Investigation of SiO2 thin films on Si substrates for use as standards for laser-acoustic measuring devices
- Determination of the critical tensile stress of sapphire by spherical indentation with additional lateral forces
- The deformation behaviour of electrodeposited nanocrystalline Ni in an atomic force microscope with a newly developed in situ bending machine
- In situ electrochemical nanoindentation of a nickel (111) single crystal: hydrogen effect on pop-in behaviour
- Indentation behaviour of (011) thin films of III–V semiconductors: polarity effect differences between GaAs and InP
- Multiwall carbon nanotubes-based composites – mechanical characterization using the nanoindentation technique
- Nanoindentation studies of stamp materials for nanoimprint lithography
- Experimental and thermodynamic evaluation of the Co–Cr–C system
- Thermodynamics of high-temperature cuprous sulfide
- Sintering of Si3N4 with Li-exchanged zeolite additive
- Effect of LiYO2 addition on sintering behavior and indentation properties of silicon nitride ceramics
- Mechanism of quasi-viscous flow of zinc single crystals
- The absolute thermoelectric power of chromium, molybdenum, and tungsten
- Modelling of metal – mould interface resistance in the Al-11.5 wt.% Si alloy casting process
- Award/Preisverleihung
- Personal
- Conferences
- Contents
- Editorial
- Editorial
- Basic
- Nanoindentation creep and stress relaxation tests of polycarbonate: Analysis of viscoelastic properties by different rheological models
- Investigation of SiO2 thin films on Si substrates for use as standards for laser-acoustic measuring devices
- Determination of the critical tensile stress of sapphire by spherical indentation with additional lateral forces
- The deformation behaviour of electrodeposited nanocrystalline Ni in an atomic force microscope with a newly developed in situ bending machine
- In situ electrochemical nanoindentation of a nickel (111) single crystal: hydrogen effect on pop-in behaviour
- Indentation behaviour of (011) thin films of III–V semiconductors: polarity effect differences between GaAs and InP
- Multiwall carbon nanotubes-based composites – mechanical characterization using the nanoindentation technique
- Nanoindentation studies of stamp materials for nanoimprint lithography
- Experimental and thermodynamic evaluation of the Co–Cr–C system
- Applied
- Thermodynamics of high-temperature cuprous sulfide
- Sintering of Si3N4 with Li-exchanged zeolite additive
- Effect of LiYO2 addition on sintering behavior and indentation properties of silicon nitride ceramics
- Mechanism of quasi-viscous flow of zinc single crystals
- The absolute thermoelectric power of chromium, molybdenum, and tungsten
- Modelling of metal – mould interface resistance in the Al-11.5 wt.% Si alloy casting process
- Kösterpreis
- Award/Preisverleihung
- Notifications
- Personal
- Conferences
Articles in the same Issue
- Contents
- Editorial
- Nanoindentation creep and stress relaxation tests of polycarbonate: Analysis of viscoelastic properties by different rheological models
- Investigation of SiO2 thin films on Si substrates for use as standards for laser-acoustic measuring devices
- Determination of the critical tensile stress of sapphire by spherical indentation with additional lateral forces
- The deformation behaviour of electrodeposited nanocrystalline Ni in an atomic force microscope with a newly developed in situ bending machine
- In situ electrochemical nanoindentation of a nickel (111) single crystal: hydrogen effect on pop-in behaviour
- Indentation behaviour of (011) thin films of III–V semiconductors: polarity effect differences between GaAs and InP
- Multiwall carbon nanotubes-based composites – mechanical characterization using the nanoindentation technique
- Nanoindentation studies of stamp materials for nanoimprint lithography
- Experimental and thermodynamic evaluation of the Co–Cr–C system
- Thermodynamics of high-temperature cuprous sulfide
- Sintering of Si3N4 with Li-exchanged zeolite additive
- Effect of LiYO2 addition on sintering behavior and indentation properties of silicon nitride ceramics
- Mechanism of quasi-viscous flow of zinc single crystals
- The absolute thermoelectric power of chromium, molybdenum, and tungsten
- Modelling of metal – mould interface resistance in the Al-11.5 wt.% Si alloy casting process
- Award/Preisverleihung
- Personal
- Conferences
- Contents
- Editorial
- Editorial
- Basic
- Nanoindentation creep and stress relaxation tests of polycarbonate: Analysis of viscoelastic properties by different rheological models
- Investigation of SiO2 thin films on Si substrates for use as standards for laser-acoustic measuring devices
- Determination of the critical tensile stress of sapphire by spherical indentation with additional lateral forces
- The deformation behaviour of electrodeposited nanocrystalline Ni in an atomic force microscope with a newly developed in situ bending machine
- In situ electrochemical nanoindentation of a nickel (111) single crystal: hydrogen effect on pop-in behaviour
- Indentation behaviour of (011) thin films of III–V semiconductors: polarity effect differences between GaAs and InP
- Multiwall carbon nanotubes-based composites – mechanical characterization using the nanoindentation technique
- Nanoindentation studies of stamp materials for nanoimprint lithography
- Experimental and thermodynamic evaluation of the Co–Cr–C system
- Applied
- Thermodynamics of high-temperature cuprous sulfide
- Sintering of Si3N4 with Li-exchanged zeolite additive
- Effect of LiYO2 addition on sintering behavior and indentation properties of silicon nitride ceramics
- Mechanism of quasi-viscous flow of zinc single crystals
- The absolute thermoelectric power of chromium, molybdenum, and tungsten
- Modelling of metal – mould interface resistance in the Al-11.5 wt.% Si alloy casting process
- Kösterpreis
- Award/Preisverleihung
- Notifications
- Personal
- Conferences