Startseite Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading

  • Indranil Chattoraj EMAIL logo , Anil Kumar , Swapan K. Das , Mita Tarafder und Soumitra Tarafder
Veröffentlicht/Copyright: 5. Februar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 94 Heft 11

Abstract

The extent of brittle crack as a function of hydrogen charging conditions was studied for a HSLA steel using circumferentially notched cylindrical tensile samples. Two different notch depths were used. The effect of hydrogen could be well represented by an effective hydrogen potential which was defined using a representative hydrogen concentration and a diffusive time parameter, for relatively faster strain rates. The high triaxiality in deep-notched samples led to the initiation of ductile failure mechanisms overwhelming the brittle cracking process.

Keywords: Hydrogen embrittlement; Concentration; Diffusivity; Hydrostatic stress; Triaxiality; HSLA steel
Dr. I. Chattoraj CRP Division, National Metallurgical Laboratory Jamshedpur 831007, India Tel.: +91 657 271 709 Fax: +91 657 270 527

  1. The first author is grateful for the grants from the Council of Scientific and Industrial Research (CSIR), India, under its “Young Scientist Award Scheme”.

References

[1] G.G. Hancock, H.H. Johnson: Trans. Metall. Soc. AIME 236 (1966) 513.Suche in Google Scholar

[2] W.W. Gerberich, Y.T. Chen, C. St. John: Metall. Trans. A 6 (1975) 1485.10.1007/BF02641960Suche in Google Scholar

[3] M.F. Stevens, I.M. Bernstein: Metall. Trans. A 20 (1989) 909.10.1007/BF02651657Suche in Google Scholar

[4] J. Kameda, C.J. McMahon Jr.: Metall. Trans. A 12 (1981) 31.10.1007/BF02648505Suche in Google Scholar

[5] R.S. Piascik, R.P. Gangloff, in: A.W. Thompson, N.R. Moody (Eds.), Hydrogen effects in materials, TMS, Warrendale, PA (1996) 409.Suche in Google Scholar

[6] W.W. Gerberich, P.G. Marsh; Hoehn, J.W., in: As Ref. [5], p. 539.Suche in Google Scholar

[7] H.F. Lopez, R.J. Raghunath, L. Albarran, L. Martinez: Metall. Mater. Trans. A 27 (1996) 3601.10.1007/BF02595451Suche in Google Scholar

[8] R.A. Oriani, P.H. Josephic: Metall. Trans. A 11 (1980) 1809.10.1007/BF02655096Suche in Google Scholar

[9] P. Sofronis, R.M. McMeeking: J. Mech. Phys. Solids 37 (1989) 317.10.1016/0022-5096(89)90002-1Suche in Google Scholar

[10] J. Lufrano, P. Sofronis: Int. J. Solids Structures 33 (1996) 1709.10.1016/0020-7683(95)00119-0Suche in Google Scholar

[11] J. Lufrano, P. Sofronis: Acta Mater. 46 (1998) 1519.10.1016/S1359-6454(97)00364-9Suche in Google Scholar

[12] P. Sofronis, J. Lufrano: Mater. Sci. Eng. A 260 (1999) 41.10.1016/S0921-5093(98)00982-4Suche in Google Scholar

[13] A.H.M. Krom, R.W.J. Koers, A. Bakker: J. Mech. Phys. Solids 47 (1999) 971.10.1016/S0022-5096(98)00064-7Suche in Google Scholar

[14] P. Munn, B. Andersson: Corrosion 46 (1990) 286.10.5006/1.3585104Suche in Google Scholar

[15] J. Toribio: J. Mater. Sci. 28 (1993) 2289.10.1007/BF01151655Suche in Google Scholar

[16] J. Toribio, M. Elices: Corros. Sci. 33 (1992) 1387.10.1016/0010-938X(92)90179-7Suche in Google Scholar

[17] D. Kwon, R.J. Asaro: Acta Metall. Mater. 38 (1990) 1595.10.1016/0956-7151(90)90127-3Suche in Google Scholar

[18] A. Taha, P. Sofronis: Eng. Fract. Mech. 68 (2001) 803.10.1016/S0013-7944(00)00126-0Suche in Google Scholar

[19] M.A.V. Devanathan, Z. Stachurski: Proc. Roy. Soc. A 270 (1962) 90.10.1098/rspa.1962.0205Suche in Google Scholar

[20] A.W. Thompson, J.C. Chesnutt: Metall. Trans. A 10 (1979) 1193.10.1007/BF02811666Suche in Google Scholar

[21] A. Turnbull, M. Saenz De Santa Maria, N.D. Thomas: Corros. Sci. 29 (1989) 89.10.1016/0010-938X(89)90082-6Suche in Google Scholar

[22] J.O’M. Bockris, W. Beck, M.A. Genshaw, M.A. Subramanyan, F.S. Williams: Acta Metall. 19 (1971) 1209.10.1016/0001-6160(71)90054-XSuche in Google Scholar

[23] J.P. Hirth: Metall. Trans. A 11 (1980) 861.10.1007/BF02654700Suche in Google Scholar

[24] B. Ladna, H.K. Birnbaum: Acta Metall. 35 (1987) 1775.10.1016/0001-6160(87)90123-4Suche in Google Scholar

[25] G.S. Frankel, R.M. Latanision: Metall. Trans. A 17 (1986) 861.10.1007/BF02643862Suche in Google Scholar

[26] F.A. McClintock: J. Appl. Mech. 35 (1968) 363.10.1115/1.3601204Suche in Google Scholar

[27] J.R. Rice, D.M. Tracy: J. Mech. Phys. Solids 17 (1969) 210.10.1016/0022-5096(69)90033-7Suche in Google Scholar

[28] N. Schluter, F. Grimpe, W. Bleck, W. Dahl: Comp. Mater. Sci. 7 (1996) 27.10.1016/S0927-0256(96)00056-0Suche in Google Scholar
Received: 2002-09-10
Published Online: 2022-02-05

© 2003 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Grain boundary diffusion and segregation of Ge in Cu: Radiotracer measurements in different kinetic regimes
  4. Thermal diffusivities of uniaxially cold-pressed Fe2Mo powders
  5. Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis
  6. Modeling of texture evolution in copper under equal channel angular pressing
  7. Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction
  8. Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys
  9. Controlled change in the plastic working conditions of metals in the plane state of strain
  10. Finite element analysis of the thermo-mechanical fatigue of DD8 single crystal nickel-based superalloy
  11. Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
  12. Textures and precipitates in Ti-stabilized interstitial-free steel
  13. Coarsening kinetics of Cu particles in an Fe-1.5% Cu alloy
  14. Kinetics of the discontinuous precipitation of a liquid phase in Cu–In alloys
  15. Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
  16. Some characteristics of electrospark deposition
  17. Aktuelle Arbeiten in der Konstitution
  18. Notifications/Mitteilungen
  19. Personal/ Personelles
  20. DGM Events
https://doi.org/10.1515/ijmr-2003-0222
Schlagwörter für diesen Artikel
Hydrogen embrittlement; Concentration; Diffusivity; Hydrostatic stress; Triaxiality; HSLA steel

Artikel in diesem Heft

  1. Frontmatter
  2. Articles/Aufsätze
  3. Grain boundary diffusion and segregation of Ge in Cu: Radiotracer measurements in different kinetic regimes
  4. Thermal diffusivities of uniaxially cold-pressed Fe2Mo powders
  5. Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis
  6. Modeling of texture evolution in copper under equal channel angular pressing
  7. Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction
  8. Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys
  9. Controlled change in the plastic working conditions of metals in the plane state of strain
  10. Finite element analysis of the thermo-mechanical fatigue of DD8 single crystal nickel-based superalloy
  11. Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
  12. Textures and precipitates in Ti-stabilized interstitial-free steel
  13. Coarsening kinetics of Cu particles in an Fe-1.5% Cu alloy
  14. Kinetics of the discontinuous precipitation of a liquid phase in Cu–In alloys
  15. Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
  16. Some characteristics of electrospark deposition
  17. Aktuelle Arbeiten in der Konstitution
  18. Notifications/Mitteilungen
  19. Personal/ Personelles
  20. DGM Events
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 21.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2003-0222/html?lang=de
Button zum nach oben scrollen