Frontmatter

Articles in the same Issue

1. Frontmatter
2. Articles/Aufsätze
3. Grain boundary diffusion and segregation of Ge in Cu: Radiotracer measurements in different kinetic regimes
4. Thermal diffusivities of uniaxially cold-pressed Fe₂Mo powders
5. Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis
6. Modeling of texture evolution in copper under equal channel angular pressing
7. Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction
8. Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys
9. Controlled change in the plastic working conditions of metals in the plane state of strain
10. Finite element analysis of the thermo-mechanical fatigue of DD8 single crystal nickel-based superalloy
11. Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
12. Textures and precipitates in Ti-stabilized interstitial-free steel
13. Coarsening kinetics of Cu particles in an Fe-1.5% Cu alloy
14. Kinetics of the discontinuous precipitation of a liquid phase in Cu–In alloys
15. Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
16. Some characteristics of electrospark deposition
17. Aktuelle Arbeiten in der Konstitution
18. Notifications/Mitteilungen
19. Personal/ Personelles
20. DGM Events