Home Technology Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
Article
Licensed
Unlicensed Requires Authentication

Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy

  • O. Sivakesavam EMAIL logo and Y. V. R. K. Prasad
Published/Copyright: February 5, 2022
Become an author with De Gruyter Brill
Submit Manuscript Author Information
International Journal of Materials Research
From the journal International Journal of Materials Research Volume 94 Issue 11

Abstract

Processing maps have been developed for hot deformation of Mg–2Zn– 1Mn alloy in as-cast condition and after homogenization with a view to evaluate the influence of homogenization. Hot compression data in the temperature range 300 – 500 °C and strain rate range 0.001 – 100 s– 1 were used for generating the processing map. In the map for the as-cast alloy the domain of dynamic recrystallization occurring at 450 °C and 0.1 s–1 has merged with another domain occurring at 500 °C and 0.001 s– 1 representing grain boundary cracking. The latter domain is eliminated by homogenization and the dynamic recrystallization domain expanded with a higher peak efficiency occurring at 500 °C and 0.05 s–1. The flow localization occurring at strain rates higher than 5 s–1 is unaffected by homogenization.

Keywords: Mg–Zn –Mn alloy; Homogenization; Processing maps; Grain boundary cracking; Dynamic recrystallization
Dr. O. Sivakesavam Defence Metallurgical Research Laboratory Kanchanbagh (PO) Hyderabad – 500 058. A.P., India Tel.: + 91 40 2434 5865 Fax: + 91 40 2434 5865/2434 1439/2434 0683

  1. One of the authors (Dr. O. Sivakesavam) is thankful to Dr. D. Banerjee, Director, Defence Metallurgical Research Laboratory, Hyderabad, India for permission to publish this paper.

References

[1] J.K. Chakravarthy, Y.V.R.K. Prasad, M.K. Asundi: Metall. Trans. A 22 (1991) 829.10.1007/BF02658992Search in Google Scholar

[2] J.K. Chakravarthy, Y.V.R.K. Prasad, M.K. Asundi: Zirconium in the Nuclear Industry: 9th Int. Symposium, ASTM-STP 1132, ASTM, Pensylvania (1992) 48.10.1520/STP25498SSearch in Google Scholar

[3] D. Padmavardhani, Y.V.R.K. Prasad: Metall. Trans. A 22 (1991) 2985.10.1007/BF02650258Search in Google Scholar

[4] D. Padmavardhani, Y.V.R.K. Prasad: Metall. Trans. A 22 (1991), 2993.10.1007/BF02650259Search in Google Scholar

[5] N. Srinivasan, Y.V.R.K. Prasad: Mater. Sci. Technol. 8 (1992) 206.10.1179/mst.1992.8.3.206Search in Google Scholar

[6] M.C. Somani, E.S. Bhagiradha Rao, N.C. Birla, M.L. Bhatia, Vakil Singh, Y.V.R.K. Prasad: Metall. Trans. A 23 (1992) 2849.10.1007/BF02651762Search in Google Scholar

[7] B.V. Radhakrishna Bhat, Y.R Mahajan, H.M. Roshan, Y.V.R.K. Prasad: Metall. Trans. A 23 (1992) 2223.10.1007/BF02646015Search in Google Scholar

[8] O. Sivakesavam, I.S. Rao, Y.V.R.K. Prasad: Mater. Sci. Technol. 9 (1993) 805.Search in Google Scholar

[9] O. Sivakesavam, Y.V.R.K. Prasad: Mater. Sci. Eng. A 323 (2002) 270.10.1016/S0921-5093(01)01392-2Search in Google Scholar

[10] O. Sivakesavam, Y.V.R.K. Prasad: Metallkd. 93 (2002) 123.10.3139/146.020123Search in Google Scholar

[11] Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, D.R. Barker: Metall. Trans. A 15 (1984) 1883.10.1007/BF02664902Search in Google Scholar

[12] R.Raj: Metall. Trans. A 12 (1981) 1089.10.1007/BF02643490Search in Google Scholar

[13] Y.V.R.K. Prasad: Metall. Mater. Trans. A 27 (1996) 235.10.1007/BF02647765Search in Google Scholar

[14] Y.V.R.K. Prasad, T. Seshacharyulu: Int. Mater. Rev. 43 (1998) 243.10.1179/imr.1998.43.6.243Search in Google Scholar

[15] H Ziegler: Progress in Solid Mechanics, Vol. 4, I.N. Sneddon, R. Hill (Eds.), North Holland, Amsterdam (1963) 93.Search in Google Scholar

[16] A.K.S. Kalyan Kumar, M.Sc. Thesis: Indian Institute of Science, Bangalore (1987).Search in Google Scholar

[17] Y.V.R.K. Prasad: Indian J. Technol. 28 (1990) 435.10.1007/BF03053491Search in Google Scholar

[18] N. Ravichandran, Y.V.R.K. Prasad, Metall.Trans. A 22 (1991) 2339.10.1007/BF02665000Search in Google Scholar

[19] S. Venugopal, S.L. Mannan, Y.V.R.K. Prasad: Metall. Trans. A 23 (1992) 3093.10.1007/BF02646128Search in Google Scholar

[20] D.H. Sastry, Y.V.R.K. Prasad, K.I. Vasu: Scripta Metall. 3 (1969) 927.10.1016/0036-9748(69)90243-9Search in Google Scholar
Received: 2002-11-27
Published Online: 2022-02-05

© 2003 Carl Hanser Verlag, München

Articles in the same Issue

  1. Frontmatter
  2. Articles/Aufsätze
  3. Grain boundary diffusion and segregation of Ge in Cu: Radiotracer measurements in different kinetic regimes
  4. Thermal diffusivities of uniaxially cold-pressed Fe2Mo powders
  5. Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis
  6. Modeling of texture evolution in copper under equal channel angular pressing
  7. Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction
  8. Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys
  9. Controlled change in the plastic working conditions of metals in the plane state of strain
  10. Finite element analysis of the thermo-mechanical fatigue of DD8 single crystal nickel-based superalloy
  11. Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
  12. Textures and precipitates in Ti-stabilized interstitial-free steel
  13. Coarsening kinetics of Cu particles in an Fe-1.5% Cu alloy
  14. Kinetics of the discontinuous precipitation of a liquid phase in Cu–In alloys
  15. Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
  16. Some characteristics of electrospark deposition
  17. Aktuelle Arbeiten in der Konstitution
  18. Notifications/Mitteilungen
  19. Personal/ Personelles
  20. DGM Events
https://doi.org/10.1515/ijmr-2003-0226
Keywords for this article
Mg–Zn –Mn alloy; Homogenization; Processing maps; Grain boundary cracking; Dynamic recrystallization

Articles in the same Issue

  1. Frontmatter
  2. Articles/Aufsätze
  3. Grain boundary diffusion and segregation of Ge in Cu: Radiotracer measurements in different kinetic regimes
  4. Thermal diffusivities of uniaxially cold-pressed Fe2Mo powders
  5. Dislocation structure and crystallite size distribution in plastically deformed Ti determined by X-ray peak profile analysis
  6. Modeling of texture evolution in copper under equal channel angular pressing
  7. Method for in situ texture investigation of recrystallization of Cu and Ti by high-energy synchrotron X-ray diffraction
  8. Contribution of dislocation substructures developed during cold rolling to the formation of rolling textures in Al–Mg alloys
  9. Controlled change in the plastic working conditions of metals in the plane state of strain
  10. Finite element analysis of the thermo-mechanical fatigue of DD8 single crystal nickel-based superalloy
  11. Factors influencing the extent of hydrogen-enhanced brittle cracking in a Cu-strengthened HSLA steel during monotonic loading
  12. Textures and precipitates in Ti-stabilized interstitial-free steel
  13. Coarsening kinetics of Cu particles in an Fe-1.5% Cu alloy
  14. Kinetics of the discontinuous precipitation of a liquid phase in Cu–In alloys
  15. Influence of homogenization on the processing map for hot working of as-cast Mg–2Zn–1Mn alloy
  16. Some characteristics of electrospark deposition
  17. Aktuelle Arbeiten in der Konstitution
  18. Notifications/Mitteilungen
  19. Personal/ Personelles
  20. DGM Events
Sign up now to receive a 20% welcome discount
Institutional Access
How does access work?
Have an idea on how to improve our website?
Please write us.
© 2026 De Gruyter Brill
Downloaded on 1.2.2026 from https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2003-0226/html
Scroll to top button