Startseite Microstructure and properties of surface-treated Timetal 834
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Microstructure and properties of surface-treated Timetal 834

  • Tomasz Moskalewicz und Aleksandra Czyrska-Filemonowicz EMAIL logo
Veröffentlicht/Copyright: 12. Februar 2022
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 97 Heft 7

Abstract

Microstructure as well as micro-mechanical and tribological properties of hard surface layers formed on Timetal 834 alloy during its nitridation or oxynitridation under glow discharge were investigated. The tests show that both layers exhibited higher microhardness and Young’s modulus as well as much better wear resistance than the untreated alloy.

The microstructure investigations, performed by light microscopy and analytical transmission electron microscopy methods, show that improved micro-mechanical and tribological properties of surface-treated alloy are related to the presence of a multiphase micro/nanostructure containing several sublayers with different morphologies and composition.

Keywords: Titanium alloys; Analytical TEM; Microstructure; Surface layers; Wear resistance

Dedicated to Professor Dr. Knut Urban on the occasion of his 65th birthday

Prof. Dr. Aleksandra Czyrska-Filemonowicz AGH University of Science and Technology Al. Mickiewicza 30, PL-30059 Kraków, Poland Tel.: +48 12 617 29 29 Fax: +48 12 617 31 90

Funding statement: Financial support of the Ministry of Education and Science (project nr 4 T08C 024 24) is kindly acknowledged

Funding statement: A part of this study has been performed under the bilateral co-operation agreement between the AGH University of Science and Technology and the Graz University of Technology (project nr 11.11.110.429). The authors appreciate a valuable contribution of Prof. F. Hofer and ProfessorW. Grogger (TUG) to the EELS/EFTEM investigations as well as ProfessorW. Rakowski, Dr.M. Kot, and Dr. S. Zimowski (AGH-UST) to mechanical/tribological tests

References

[1] M. Peters, Ch. Leyens: Titan und Titanlegierungen, Wiley-VCH Verlag, Weinheim (2002).10.1002/9783527611089Suche in Google Scholar

[2] G. Luetjering, J. Albrecht (Eds.): Ti-2003 science and technology. Wiley-VCH Verlag, Weinheim (2004).Suche in Google Scholar

[3] C.D. Cui, S.L. Zhu, H.C. Man, X.J. Yang: Surface Coatings and Technology 190 (2005) 309.10.1016/j.surfcoat.2004.02.012Suche in Google Scholar

[4] T. Wierzchon: Mater. Sci. Forum 426–432 (2003) 2563.10.4028/www.scientific.net/MSF.426-432.2563Suche in Google Scholar

[5] A. Czyrska-Filemonowicz, P.A Buffat, M. Lucki, T. Moskalewicz, W. Rakowski, J. Lekki, T. Wierzchon: Acta Mater. 53 (2005) 4367.10.1016/j.actamat.2005.05.035Suche in Google Scholar

[6] A. Czyrska-Filemonowicz, P.A. Buffat, T. Wierzchon: Scripta Mater. 53 (2005) 1439.10.1016/j.scriptamat.2005.08.034Suche in Google Scholar

[7] Java Electron Microscopy Software (JEMS); http://cimewww.epfl.ch/people/stadelmann/jemsWebSite/jems.htmlSuche in Google Scholar

[8] F. Hofer, W. Grogger, G. Kothleitner, P. Warbichler: Ultramicroscopy 67 (1997) 83.10.1016/S0304-3991(96)00106-4Suche in Google Scholar

[9] http://www.csem.ch/instrumSuche in Google Scholar

[10] T. Moskalewicz, M. Kot, M. Zie˛tara, A. Czyrska-Filemonowicz: Inz˙ynieria Materiałowa (in Polish) 5 (2005) 381.Suche in Google Scholar

[11] C. Ramachandra, A.K. Singh, G.M.K. Sarmal: Metall. Trans. A 24 (1993) 1273.10.1007/BF02668196Suche in Google Scholar

[12] K. Suenaga, E. Sandré, C. Colliex, C.J. Pickard, H. Kataura, S. Iijima: Phys. Rev. B 63 (2001) 5408.10.1103/PhysRevB.63.165408Suche in Google Scholar

[13] Y. Kihn, C. Mirguet, L. Calmels: J. Electron Spectr. and Rel. Phen. 143 (2005) 117.10.1016/j.elspec.2004.02.170Suche in Google Scholar

[14] F. Hofer, P.Warbichler, A. Scott, R. Brydson, I. Galesic, B. Kolbesen: J. Microscopy 204 (2001) 166.10.1046/j.1365-2818.2001.00946.xSuche in Google Scholar PubMed

[15] A.L. Ankudinov, B. Ravel, J.J. Rehr, S.D. Conradson: Phys. Rev. B 58 (1998) 7565.10.1103/PhysRevB.58.7565Suche in Google Scholar

[16] B. Matthes, J. Broszeit, J. Aromaa, H. Ronkainen, S.P. Hannula, A.M.A. Leyland: Surface and Coatings Techn. 49 (1991) 489.10.1016/0257-8972(91)90105-6Suche in Google Scholar

[17] R. Wei, T. Booker, Ch. Rincon, J. Arps: Surface and Coatings Techn. 186 (2004) 305.10.1016/j.surfcoat.2004.02.052Suche in Google Scholar
Received: 2006-01-12
Accepted: 2006-03-01
Published Online: 2022-02-12

© 2006 Carl Hanser Verlag, München

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Professor Dr. Knut Urban 65 Years
  4. Basic
  5. Ordering processes and atomic defects in FeCo
  6. Atomic resolution electron tomography: a dream?
  7. Electron tomography of microelectronic device interconnects
  8. Aberration correction in electron microscopy
  9. Off-axis electron holography: Materials analysis at atomic resolution
  10. Determination of phases of complex scattering amplitudes and two-particle structure factors by investigating diffractograms of thin amorphous foils
  11. Prospects of the multislice method for CBED pattern calculation
  12. Electron energy-loss spectrometry for metals:some thoughts beyond microanalysis
  13. Quantitative assessment of nanoparticle size distributions from HRTEM images
  14. Quantitative microstructural and spectroscopic investigation of inversion domain boundaries in sintered zinc oxide ceramics doped with iron oxide
  15. Structural domains in antiferromagnetic LaFeO3 thin films
  16. Short-range order of liquid Ti72.3Fe27.7 investigated by a combination of neutron scattering and X-ray diffraction
  17. Extended interfacial structure between two asymmetrical facets of a Σ = 9 grain boundary in copper
  18. Dislocation imaging in fcc colloidal single crystals
  19. Applied
  20. Omega phase transformation – morphologies and mechanisms
  21. Mixed (Sr1 − xCax)33Bi24Al48O141 fullerenoids: the defect structure analysed by (S)TEM techniques
  22. Wetting of aluminium-based complex metallic alloys
  23. Annealing-induced phase transitions in a Zr–Ti–Nb–Cu–Ni–Al bulk metallic glass matrix composite containing quasicrystalline precipitates
  24. Special planar defects in the structural complex metallic alloys of Al–Pd–Mn and Al–Ni–Rh
  25. On the formation of Si nanowires by molecular beam epitaxy
  26. Self-induced oscillations in Si and other semiconductors
  27. Growth, interface structure, and magnetic properties of Fe/GaAs and Fe3Si/GaAs hybrid systems
  28. An investigation of improved titanium/titanium nitride barriers for submicron aluminum-filled contacts by energy-filtered transmission electron microscopy
  29. Radiation damage during HRTEM studies in pure Al and Al alloys
  30. Cross-sectional high-resolution transmission electron microscopy at Mo/Si multilayer stacks
  31. Structural properties of the fiber –matrix interface in carbon-fiber/carbon-matrix composites and interfaces between carbon layers and planar substrates
  32. Microstructure and properties of surface-treated Timetal 834
  33. Notifications
  34. Personal
  35. Conferences
https://doi.org/10.1515/ijmr-2006-0166
Schlagwörter für diesen Artikel
Titanium alloys; Analytical TEM; Microstructure; Surface layers; Wear resistance

Artikel in diesem Heft

  1. Frontmatter
  2. Editorial
  3. Professor Dr. Knut Urban 65 Years
  4. Basic
  5. Ordering processes and atomic defects in FeCo
  6. Atomic resolution electron tomography: a dream?
  7. Electron tomography of microelectronic device interconnects
  8. Aberration correction in electron microscopy
  9. Off-axis electron holography: Materials analysis at atomic resolution
  10. Determination of phases of complex scattering amplitudes and two-particle structure factors by investigating diffractograms of thin amorphous foils
  11. Prospects of the multislice method for CBED pattern calculation
  12. Electron energy-loss spectrometry for metals:some thoughts beyond microanalysis
  13. Quantitative assessment of nanoparticle size distributions from HRTEM images
  14. Quantitative microstructural and spectroscopic investigation of inversion domain boundaries in sintered zinc oxide ceramics doped with iron oxide
  15. Structural domains in antiferromagnetic LaFeO3 thin films
  16. Short-range order of liquid Ti72.3Fe27.7 investigated by a combination of neutron scattering and X-ray diffraction
  17. Extended interfacial structure between two asymmetrical facets of a Σ = 9 grain boundary in copper
  18. Dislocation imaging in fcc colloidal single crystals
  19. Applied
  20. Omega phase transformation – morphologies and mechanisms
  21. Mixed (Sr1 − xCax)33Bi24Al48O141 fullerenoids: the defect structure analysed by (S)TEM techniques
  22. Wetting of aluminium-based complex metallic alloys
  23. Annealing-induced phase transitions in a Zr–Ti–Nb–Cu–Ni–Al bulk metallic glass matrix composite containing quasicrystalline precipitates
  24. Special planar defects in the structural complex metallic alloys of Al–Pd–Mn and Al–Ni–Rh
  25. On the formation of Si nanowires by molecular beam epitaxy
  26. Self-induced oscillations in Si and other semiconductors
  27. Growth, interface structure, and magnetic properties of Fe/GaAs and Fe3Si/GaAs hybrid systems
  28. An investigation of improved titanium/titanium nitride barriers for submicron aluminum-filled contacts by energy-filtered transmission electron microscopy
  29. Radiation damage during HRTEM studies in pure Al and Al alloys
  30. Cross-sectional high-resolution transmission electron microscopy at Mo/Si multilayer stacks
  31. Structural properties of the fiber –matrix interface in carbon-fiber/carbon-matrix composites and interfaces between carbon layers and planar substrates
  32. Microstructure and properties of surface-treated Timetal 834
  33. Notifications
  34. Personal
  35. Conferences
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 29.9.2025 von https://www.degruyterbrill.com/document/doi/10.1515/ijmr-2006-0166/html
Button zum nach oben scrollen