Startseite Investigation of the surface of a laser-treated cast iron cylinder bore
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Investigation of the surface of a laser-treated cast iron cylinder bore

  • Kornél Májlinger und Péter J. Szabó
Veröffentlicht/Copyright: 26. März 2012
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 10

Abstract

The pollution materials emission standards in Europe are going to be more strict. In order to meet the environmental standards, a European automotive manufacturer performs a finishing laser treatment on the honed cylinder bores of their V-engine blocks. Samples of laser treated cast iron cylinder bores with lamellar graphite were investigated. In order to evaluate the microstructure and grain size of the laser-treated layer, scanning electron micrographs were taken on cross-sectioned samples with a scanning electron microscope/focused ion beam dual-beam instrument. The samples were found to be ultra-fine grained. Nanoindentation hardness measurements of the surface layer showed a clear linear trend between the laser power density in the applied range and the measured hardness. Additional microhardness measurements suggest an annealed region beneath the surface.

Keywords: Laser surface treatment; Cast iron; Cylinder bore; Focused ion beam; Nanoindentation
2 Correspondence address: Dr. Kornél Májlinger, Department of Materials Science and EngineeringBudapest University of Technology and EconomicsBertalan Lajos utca 71111, BudapestHungary, Tel.: +36 1 463 11 15, Fax: +36 1 463 23 66, E-mail:

Refrences

[1]H.Lindner, H.W.Bergmann, C.Brandenstein, A.Lang, R.Queitsch, S.Reichstein, E.Stengel: VDI-Berichte1764 (2003) 73.Suche in Google Scholar

[2]L.Migliore: Laser Materials Processing, Marcel Dekker, New York (1996).Suche in Google Scholar

[3]C.E.Webb: Handbook of Laser Technology and Applications, Vol. 3, IOP Publishing, Philadelphia (2004). 10.1887/0750306076Suche in Google Scholar

[4]J.C.Ion: Laser Processing of Engineering Materials, Elsevier, Oxford (2005).Suche in Google Scholar

[5]J.F.Ready: LIA Handbook of Laser Materials Processing, Laser Institute of America, Orlando (2001).Suche in Google Scholar

[6]X.-B.Liu, G.Yu, J.Guo, Q.-Y.Shang, Z.-G.Zhang, Y.-J.Gu: J. Iron Steel Res. Int.14 (2007) 42. 10.1016/S1006-706X(07)60010-7Suche in Google Scholar

[7]J.de Damborenea: Surf. Coat. Technol.100-101 (1998) 377. 10.1016/S0257-8972(97)00652-XSuche in Google Scholar

[8]G.Duffet, P.Sallamand, A.B.Vannes: Appl. Surf. Sci.205 (2003) 289. 10.1016/S0169-4332(02)01119-4Suche in Google Scholar

[9]J.H.Abboud, K.Y.Benyounis, A.G.Olabi, M.S.J.Hashmi: J. Mater. Proc. Technol.182 (2007) 427. 10.1016/j.jmatprotec.2006.08.02Suche in Google Scholar

[10]T.Xin, Z.Hong, C.Li, Z.Zhi-Hui, R.Lu-Quan: Int. J. Fatigue30 (2008) 1125. 10.1016/j.ijfatigue.2007.07.004Suche in Google Scholar

[11]G.Knoll, V.Lagemann, R.Lechtape-Grüter, A.Robota, F.Schlerege: VDI-Berichte1764 (2003) 63.Suche in Google Scholar

[12]L.Byrnes, M.Kramer, G.Flores: VDI-Berichte1764 (2003) 97.Suche in Google Scholar

[13]B.Gérard: Surf. Coat. Technol.201 (2006) 2028. 10.1016/j.surfcoat.2006.04.050Suche in Google Scholar

[14]K.Bobzin, F.Ernst, K.Richardt, T.Schlaefer, C.Verpoort, G.Flores: Surf. Coat. Technol.202 (2008) 4438. 10.1016/j.surfcoat.2008.04.023Suche in Google Scholar

[15]P.Andersson, J.Koskinen, S.Varjus, Y.Gerbig, H.Haefke, S.Georgiou, B.Zhmud, W.Buss: Wear262 (2007) 369. 10.1016/j.wear.2006.06.003Suche in Google Scholar

[16]http://www.coherent.com/Downloads/dieselengine_ilsRev2.pdf.Suche in Google Scholar

[17]K.Májlinger, P.J.Szabó: Period. Polytech. Mech.52 (2008) 71. 10.3311/pp.me.2008-2.06Suche in Google Scholar

[18]K.Májlinger, P.J.Szabó: J. Phys. Conf. Ser. 240 (2010) 1. 10.1088/1742-6596/240/1/012169Suche in Google Scholar

[19]K.Májlinger, P.J.Szabó: Mater. Sci. Forum659 (2010) 319. 10.4028/www.scientific.net/MSF.659.319Suche in Google Scholar

[20]J.M.Radzikowska: Mater. Charact.54 (2005) 287. 10.1016/j.matchar.2004.08.019Suche in Google Scholar

[21]W.Y.Kwong, W.Y.Zhang: IEEE T. Semiconduct. M. (2005) 469. 10.1109/ISSM.2005.1513408Suche in Google Scholar

[22]P.R.Munroe: Mater. Charact.60 (2009) 2. 10.1016/j.matchar.2008.11.014Suche in Google Scholar

Received: 2011-3-19
Accepted: 2012-1-27
Published Online: 2012-03-26
Published in Print: 2012-10-01

© 2012, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110751
Schlagwörter für diesen Artikel
Laser surface treatment; Cast iron; Cylinder bore; Focused ion beam; Nanoindentation

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 27.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110751/html?lang=de
Button zum nach oben scrollen