Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
-
F. Wang
und H. R. Gong
Abstract
Both first-principles molecular-dynamics calculations and experimental observations reveal that the coherent Pd/TiAl interfaces with various orientations are all thermally stable after annealing at 773 K, which seems good for the lifetime of Pd/TiAl membranes. It is found that the bond strength of the Pd/TiAl interface at 773 K becomes slightly smaller than the corresponding value at 0 K, and the interface dipole formed at 773 K seems marginally smaller than that at 0 K. In addition, calculations also show that the bond lengths of Pd/TiAl interfaces after annealing at 773 K become oscillated due to thermal vibrations, which are quite different from those at 0 K.
Refrences
[1]T.Mitsui, M.K.Rose, E.Fomin, D.F.Ogletree, M.Salmeron: Nature422 (2003) 705; Science 297 (2002) 1850. 12228712 10.1126/science.1075095Suche in Google Scholar PubMed
[2]J.Rogal, K.Reuter, M.Scheffler: Phys. Rev. Lett.98 (2007) 046101. 10.1103/PhysRevLett.98.046101Suche in Google Scholar PubMed
[3]A.Grosz, A.Dianat: Phys. Rev. Lett.98 (2007) 206107. 10.1103/PhysRevLett.98.206107Suche in Google Scholar PubMed
[4]R.E.Buxbaum, T.L.Marker: J. Membr. Sci.85 (1993) 29. 10.1016/0376-7388(93)85004-GSuche in Google Scholar
[5]G.Xomeritakis, Y.S.Lin: J. Membr. Sci.133 (1997) 217. 10.1016/S0376-7388(97)00084-7Suche in Google Scholar
[6]S.-J.Lee, S.-M.Yang, S.Bin: J. Membr. Sci.96 (1994) 223. 10.1016/0376-7388(94)00133-2Suche in Google Scholar
[7]A.Li, W.Liang, R.Hughes: J. Membr. Sci.149 (1998) 259. 10.1016/S0376-7388(98)00192-6Suche in Google Scholar
[8]Y.Huang, R.Dittmeyer: J. Membr. Sci.282 (2006) 296. 10.1016/j.memsci.2006.05.032Suche in Google Scholar
[9]D.J.Edlund, J.McCarthy: J. Membr. Sci.107 (1995) 147. 10.1016/0376-7388(95)00110-XSuche in Google Scholar
[10]H.R.Gong, Y.H.He, B.Y.Huang: Appl. Phys. Lett.93 (2008) 101907. 10.1063/1.2970966Suche in Google Scholar
[11]H.R.Gong: Intermetallics17 (2009) 562. 10.1016/j.intermet.2009.01.009Suche in Google Scholar
[12]W.Sha, S.Malinov: Titanium alloys: Modelling of microstructure, properties and applications, Woodhead Publishing, Cambridge, UK (2009). 10.1063/1.2970966Suche in Google Scholar
[13]G.Kresse, J.Hafner: Phys. Rev. B47 (1993) 558. 10.1103/PhysRevB.47.558Suche in Google Scholar
[14]P.E.Blöchl: Phys. Rev. B50 (1994) 17953. 10.1103/PhysRevB.50.17953Suche in Google Scholar
[15]G.Kresse, D.Joubert: Phys. Rev. B59 (1999) 1758. 10.1103/PhysRevB.59.1758Suche in Google Scholar
[16]J.Perdew, A.Zunger: Phys. Rev. B23 (1981) 5048. 10.1103/PhysRevB.23.5048Suche in Google Scholar
[17]W.Sha, X.Wu, K.G.Keong: Electroless copper and nickel-phosphorus plating: Processing, characterisation and modelling, Woodhead Publishing, Cambridge, UK (2011). 10.1533/9780857090966Suche in Google Scholar
© 2012, Carl Hanser Verlag, Munich
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
- Thermodynamics of dilute binary solid solutions using the cluster variation method
- Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
- Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
- Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
- Investigations on laser welding of magnesium alloys
- Investigation of the surface of a laser-treated cast iron cylinder bore
- Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
- Study of the structural evolution of crystalline zinc oxide films prepared by PLD
- Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
- Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
- Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
- Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
- Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
- Rheology and microstructure of polymer-modified asphalt nanocomposites
- Short Communications
- Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
- Thermodynamics of dilute binary solid solutions using the cluster variation method
- Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
- Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
- Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
- Investigations on laser welding of magnesium alloys
- Investigation of the surface of a laser-treated cast iron cylinder bore
- Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
- Study of the structural evolution of crystalline zinc oxide films prepared by PLD
- Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
- Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
- Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
- Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
- Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
- Rheology and microstructure of polymer-modified asphalt nanocomposites
- Short Communications
- Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
- DGM News
- DGM News