Startseite Rheology and microstructure of polymer-modified asphalt nanocomposites
Artikel
Lizenziert
Nicht lizenziert Erfordert eine Authentifizierung

Rheology and microstructure of polymer-modified asphalt nanocomposites

  • Ali Topal , Markanday Subramanian Sureshkumar , Burak Sengoz und Giovanni Polacco
Veröffentlicht/Copyright: 11. Juni 2013
Veröffentlichen auch Sie bei De Gruyter Brill
Informationen für Autor*innen
International Journal of Materials Research
Aus der Zeitschrift International Journal of Materials Research Band 103 Heft 10

Abstract

Asphalt modification with polymers has utilized the advantages of nanotechnology including nanoclays as one of the components in addition to polymers. This led to the metamorphosis of polymer-modified asphalts into a new class of material called polymer-modified asphalt nanocomposites which offer the cumulative characteristic features obtained by the polymer modification of asphalt as well as the innovative properties experienced from polymer nanocomposites. Polymer-modified asphalt nanocomposites including styrene butadiene and ethylene vinyl acetate have revealed additional features which were not available in polymer-modified asphalts. The compositional complexity provides a great challenge in addressing the structure–property relations prevailing in these materials. This paper describes microstructural features as determined by Qwin Plus Software analysis and the rheological properties on compositional changes.

Keywords: Nanocomposite; Evatene; Reology; Image processing; Polymer
1 Correspondence address: Assoc. Prof. Dr. Burak Sengoz, Dokuz Eylul University, Faculty of Engineering, Department of Civil Engineering35160 IzmirTurkey, Tel.: +90 232 4127072, Fax: +90 232 4127253, E-mail:

Refrences

[1]H.J.Forbes: Nature135 (1935) 845.10.1038/135845a0Suche in Google Scholar

[2]J.Reed, D.Whiteoak, in: R.Hunter (Ed.) Shell Bitumen Handbook, Thomas Telford, London (2003).Suche in Google Scholar

[3]G.Polacco, J.Statsna, D.Biondi, L.Zanzotto: Curr. Opin. Colloid Interface Sci.11 (2006) 230. 10.1016/j.cocis.2006.09.001Suche in Google Scholar

[4]J.F.Masson, V.Leblond, J.Margeson: J. Microsc.221 (2006) 17. 10.1111/j.1365-2818.2006.01540.xSuche in Google Scholar PubMed

[5]M.B.De Moraes, R.B.Pereira, R.A.Simão, L.F.M.Leite: J. Microsc.239 (2010) 46. Suche in Google Scholar PubMed

[6]R.M.Ho, A.Adedeji, D.W.Giles, D.A.Hajduk, C.W.Macosko, F.S.Bates: J. Polym. Sci. Pol. Phys. B35 (1997) 2857. 10.1002/(SICI)1099-0488(199712)35:17<2857::AID-POLB10>3.0.CO;2-6Suche in Google Scholar

[7]I.A.Uskev: Vyosokomol Soedin, 2 (1960) 926.Suche in Google Scholar

[8]R.A.Vaia, H.Ishi, E.P.Giannelis: Chem. Mater.5 (1993) 1694. 10.1021/cm00036a004Suche in Google Scholar

[9]S.S.Ray, K.Okamoto: Prog. Polym. Sci.28 (2003) 1539. 10.1016/j.progpolymsci.2003.08.002Suche in Google Scholar

[10]M.E.ClaranceJr., L.G.Martin, W.E.Chester, P.G.Dennis: U.S. Pat. No. 5.652.284. (1977) 1.Suche in Google Scholar

[11]D.B.Ghile: Ph D Thesis, Delft University of Technology, Netherlands (2006) 1.Suche in Google Scholar

[12] M.S. Sureshkumar, D. Biondi, S. Fillipi, G. Polacco (Eds.) Proc. Int. Conf. on Nanotechnology and Advanced Materials (ICNAM), University of Bahrain, Bahrain (2009) 138.Suche in Google Scholar

[13]M.Alexander, P.Dubois: Mater. Sci. Eng. R.28 (2000) 1.Suche in Google Scholar

[14]I.J.Chin, T.Thurn-Albrech, H.C.Kim, T.P.Russell, J.Wang: Polymer42 (2001) 5947. 10.1016/S0032-3861(00)00898-3Suche in Google Scholar

[15]C.M.Kim, D.H.Lee, B.Hoffman, J.Kressler, G.Stoppelman: Polymer42 (2001) 1095. 10.1016/S0032-3861(00)00468-7Suche in Google Scholar

[16]C.Ouyang, S.Wang, S.Zhang, Y.Zhang: Polym. Degrad. Stab.87 (2005) 309. 10.1016/j.polymdegradstab.2004.08.014Suche in Google Scholar

[17]G.Polacco, P.Kříž, S.Filippi, J.Stastna, D.Biondi, L.Zanzotto: Eur. Polym. J.44 (2008) 3412. 10.1016/j.eurpolymj.2008.08.032Suche in Google Scholar

[18]B.Brule, Y.Brion, B.Tanguy: J. Assoc. Asphalt Paving. Technol.57 (1988) 41.Suche in Google Scholar

[19]G.Airey: Constr. Build. Mater.16 (2002) 473. 10.1016/S0950-0618(02)00103-4Suche in Google Scholar

[20]A.Okada, A.Usuki: Mater. Sci. Eng. C3 (1995) 109. 10.1016/0928-4931(95)00110-7Suche in Google Scholar

[21]R.Krishnamoorthi, K.Yurekli: Curr. Opin. Colloid Interface Sci.6 (2001) 464. 10.1016/S1359-0294(01)00121-2Suche in Google Scholar

Received: 2011-5-17
Accepted: 2012-1-26
Published Online: 2013-06-11
Published in Print: 2012-10-01

© 2012, Carl Hanser Verlag, Munich

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
https://doi.org/10.3139/146.110750
Schlagwörter für diesen Artikel
Nanocomposite; Evatene; Reology; Image processing; Polymer

Artikel in diesem Heft

  1. Contents
  2. Contents
  3. Original Contributions
  4. Phase equilibria in the Gd–Ni binary and Mg–Ni–Gd ternary systems
  5. Thermodynamics of dilute binary solid solutions using the cluster variation method
  6. Thermal stability of coherent Pd/TiAl interfaces studied from first-principles calculations and experiments
  7. Electropulsing-induced phase transformations and their effects on the single point diamond turning of a tempered alloy AZ91
  8. Study of the mechanism of ductile-regime grinding of SiCp/Al composites using finite element simulation
  9. Investigations on laser welding of magnesium alloys
  10. Investigation of the surface of a laser-treated cast iron cylinder bore
  11. Solidification behaviour of an AA5754 Al alloy ingot cast with high impurity content
  12. Study of the structural evolution of crystalline zinc oxide films prepared by PLD
  13. Effects of sintering temperature on pore characterization and strength of porous cordierite–mullite ceramics by a pore-forming in-situ technique
  14. Sol–gel synthesis of Eu3+, Tb3+ co-doped Y2O3 scintillating nanopowders
  15. Morphological study of SiC coating developed on 2D carbon composites using MTS precursor in a hot-wall vertical reactor
  16. Self-assembling behavior and corrosion inhibition properties of TDPA films on differently structured surfaces of 2024 and 1060 aluminum alloys
  17. Photocatalytic activity of MnWO4 powder in highly effective hydrogen generation from H2O and H2O2
  18. Rheology and microstructure of polymer-modified asphalt nanocomposites
  19. Short Communications
  20. Microstructure and phase composition in a die cast Mg–Nd alloy containing Zn and Zr
  21. DGM News
  22. DGM News
Jetzt anmelden und 20% sparen
Institutioneller Zugang
Wie funktioniert Authentifizierung?
Haben Sie eine Idee, wie wir unsere Website verbessern können?
Bitte schreiben Sie uns.
© 2025 De Gruyter Brill
Heruntergeladen am 27.10.2025 von https://www.degruyterbrill.com/document/doi/10.3139/146.110750/html?lang=de
Button zum nach oben scrollen