Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys
-
Harald F. Chladil
Abstract
Solid-state phase transformations and phase transition temperatures in Ti-45 at.% Al and Ti-45 at.% Al-(5, 7.5, 10) at.% Nb alloys were analyzed experimentally and compared to thermodynamic calculations. Results from scanning electron microscopy, high-energy and conventional X-ray diffraction as well as differential scanning calorimetry were used for the characterization of the prevailing phases and phase transformations. For the prediction of phase stabilities and phase transition temperatures, thermodynamic calculations using the CALPHAD method were conducted. In order to achieve better agreement between calculated and experimental results, a commercially available database was modified using our own results from thermo-physical measurements and annealing treatments.
References
[1] F.Appel, M.Oehring, in: C.Leyens, M.Peters (Eds.), Titanium and Titanium Alloys, WILEY- VCH GmbH & Co. KGaA, Weinheim, Germany (2003) 89.10.1002/9783527636204Suche in Google Scholar
[2] H.Kestler, H.Clemens, in: M.Peters, C.Leyens (Eds.), Titan and Titanium Alloys, WILEY-VCH GmbH & Co. KGaA, Weinheim, Germany (2003) 369.Suche in Google Scholar
[3] H.Clemens, H.Kestler: Advanced Engineering Materials2 (2000) 551.Suche in Google Scholar
[4] F.Appel, U.Brossmann, U.Christoph, S.Eggert, P.Janschek, U.Lorenz, J.Müllauer, M.Oehring, J.D.H.Paul: Advanced Engineering Materials11 (2000) 699.Suche in Google Scholar
[5] H.Clemens, A.Bartels, S.Bystrzanowski, H.Chladil, H.Leitner, G.Dehm, R.Gerling, F.P.Schimansky: Intermetallics14 (2006) 1380.Suche in Google Scholar
[6] N.Saunders, in: Y.W.Kim, D.M.Dimiduk, M.H.Loretto (Eds.), Gamma Titanium Aliminides, TMS Warrendale, PA (1999) 183.Suche in Google Scholar
[7] M.Beschliesser, H.Clemens, H.Kestler, F.Jeglitsch: Scripta Materialia49 (2003) 279.Suche in Google Scholar
[8] S.Malinov, T.Novoselova, W.Sha: Materials Science and Engineering A386 (2004) 344.Suche in Google Scholar
[9] F.Appel, M.Oehring, R.Wagner: Intermetallics8 (2000) 1283.10.1002/9780470686652.eae215Suche in Google Scholar
[10] V.Küstner, M.Oehring, A.Chatterjee, V.Güther, H.G.Brokmeier, in: Y.W.Kim, H.Clemens, A.H.Rosenberger (Eds.), Gamma Titanium Aluminides 2003, TMS, Warrendale, USA (2003) 89.Suche in Google Scholar
[11] T.Tetsui, K.Shindo, S.Kobayashi, M.Takeyama: Scripta Mater.47 (2002) 399.Suche in Google Scholar
[12] F.Appel, M.Oehring, J.D.H.Paul: Advanced Engineering Materials8 (2006) 371.Suche in Google Scholar
[13] T.Tetsui, K.Shindo, S.Kobayashi, M.Takeyama: Intermetallics11 (2003) 299.Suche in Google Scholar
[14] H.F.Chladil, H.Clemens, H.Leitner, A.Bartels, R.Gerling, W.T.Marketz, E.Kozeschnik, in: M.J. Mills, H. Inui, H. Clemens, C.-L. Fu (Eds.), MRS Proc. 842, Warrendale, PA (2004) S5.47.1.10.1557/PROC-842-S5.47Suche in Google Scholar
[15] T.T.Cheng, M.H.Loretto: Acta Materialia46 (1998) 4801.Suche in Google Scholar
[16] H.F.Chladil, H.Clemens, A.Otto, V.Güther, S.Kremmer, A.Bartels, R.Gerling: BHM9 (2006) 356.Suche in Google Scholar
[17] G.L.Chen, W.J.Zhang, Z.C.Liu, S.J.Li, Y.W.Kim, in: Y.W.Kim, D.M.Dimiduk, M.H.Loretto (Eds.), Gamma Titanium Aluminides 1999, TMS (1999) 371.Suche in Google Scholar
[18] D.Nguyen-Manh, D.G.Pettifor, in: Y.W.Kim, D.M.Dimiduk, M.H.Loretto (Eds.), Gamma Titanium Aluminides, TMS, Warrendale, PA, USA (1999) 175.Suche in Google Scholar
[19] T.H.Yu, C.H.Koo: Materials Science and Engineering A239 (1997) 694.10.1016/j.msec.2010.02.016Suche in Google Scholar
[20] K.-D.Liss, A.Bartels, A.Schreyer, H.Clemens: Textures Microstruct.35 (2003) 219.10.1144/GSL.SP.2001.200.01.13Suche in Google Scholar
[21] K.-D.Liss, A.Bartels, H.Clemens, S.Bystrzanowski, A.Stark, T.Buslaps, F.-P.Schimansky, R.Gerling, C.Scheu, A.Schreyer: Acta Materialia54 (2006) 3721.Suche in Google Scholar
[22] T.Novoselova, S.Malinov, W.Sha, A.Zhecheva: Mater. Sci. Eng. A371 (2004) 103.Suche in Google Scholar
[23] H. F.Chladil, H.Clemens, H.Leitner, A.Bartels, R.Gerling, F.P.Schimansky, S.Kremmer: Intermetallics14 (2006) 1194.Suche in Google Scholar
[24] H.F.Chladil, H.Clemens, H.Leitner, A.Bartels, W.T.Marketz: Advanced Engineering Materials7 (2005) 1131.Suche in Google Scholar
[25] H.F.Chladil, H.Clemens, M.Takeyama, E.Kozeschnik, R.Gerling, A.Bartels, S.Kremmer, in: C.L.Fu, H.Clemens, J.Wiezorek, M.Takeyama, D.Morris (Eds.), MRS Fall Meeting 2006, MRS (2006) II07.Suche in Google Scholar
[26] H.F.Chladil, Ph.D. Thesis, Montanuniversität Leoben, Austria (2007)Suche in Google Scholar
[27] R.Gerling, H.Clemens, F.P.Schimansky: Advanced Engineering Materials6 (2004) 23.Suche in Google Scholar
[28] L.Margulies, M.J.Kramer, R.W.McCallum, S.Kycia, D.R.Haeffner, J.C.Lang, A.I.Goldman: Rev. Sci. Instr.70 (1999) 3554.Suche in Google Scholar
[29] A.P.Hammersley, S.O.Svensson, M.Hanfland, A.N.Fitch, D.Häusermann: High Press. Res.14 (1996) 235.Suche in Google Scholar
[30] B.Sundman, B.Jansson, J.-O.Andersson: Calphad9 (1985) 153.10.1016/j.calphad.2004.10.001Suche in Google Scholar
[31] E.Kozeschnik, B.Buchmayr, in: H.Cerjak, H.K.D.H.Bhadeshia (Eds.), Mathematical Modelling of Weld Phenomena, IOM, London (2001) 349.Suche in Google Scholar
[32] I.Ansara: Int. Met. Rev.22 (1979) 20.10.1111/an.1979.20.1.22Suche in Google Scholar
[33] N.Saunders, A.P.Miodownik, in: R.W.Cahn (Ed.), CALPHAD – A Comprehensive Guide, Pergamon Materials Series, Vol. 1, Pergamon, Oxford (1998).Suche in Google Scholar
[34] A.Stark, A.Bartels, F.P.Schimansky, H.Clemens, in: C.L.Fu, H.Clemens, M.Takeyama, J.Wiezorek, D.Morris (Eds.), MRS Proc., (2007) II07.Suche in Google Scholar
[35] W.Hohenauer: Austrian Research Centre Seibersdorf, Austria, private Communication.Suche in Google Scholar
[36] W.W.Wendlandt, in: P.J.Elving, J.D.Winefordner (Ed.), Thermal Analysis, Chemical Analysis, Vol. Location (1986).Suche in Google Scholar
[37] M.Takeyama, Y.Ohmura, M.Kikuchi, T.Matsuo: Intermetallics6 (1998) 643.Suche in Google Scholar
[38] M.Takeyama, S.Kobayashi: Intermetallics13 (2005) 993.Suche in Google Scholar
[39] M.Takeyama: Mater. Jpn35 (1996) 1058.10.1353/mln.1996.0067Suche in Google Scholar
[40] L.A.Bendersky, W.J.Boettinger, B.P.Burton, F.S.Biancaniello, C. B.Shoemaker: Acta Metallurgica et Materialia38 (1990) 931.Suche in Google Scholar
© 2007, Carl Hanser Verlag, München
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Professor Dr. phil. Dr. techn. e. h. Hellmut F. Fischmeister
- Basic
- Compressive deformation of lamellar microstructures – a short review
- Influence of external and internal length scale on the flow stress of copper
- Spinodal decomposition of cubic Ti1−xAlxN: Comparison between experiments and modeling
- Combined ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films
- Gold-enhanced oxidation of silicon nanowires
- Numerical determination of parameterised failure curves for ductile structural materials
- Relaxation of semiconductor nanostructures using molecular dynamics with analytic bond order potentials*
- Examination of phase transformations in the system Fe–N–C by means of nitrocarburising reactions and secondary annealing experiments; the α + ∊ two-phase equilibrium
- Applied
- On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS
- Silicon nitride tools for hot rolling of high-alloyed steel and superalloy wires – load analysis and first practical tests
- Development of the unloading stiffness during cyclic plastic deformation of a high-strength aluminium alloy in different tempers
- Enhanced thermal stability of a cobalt–boron carbide nanocomposite by ion-implantation
- Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys
- Kinetics of nanoscale structure development during Mg-vapour reduction of tantalum oxide
- On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation
- Adhesive contact between flat punches with finite edge radius and an elastic half-space
- Notifications
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Editorial
- Professor Dr. phil. Dr. techn. e. h. Hellmut F. Fischmeister
- Basic
- Compressive deformation of lamellar microstructures – a short review
- Influence of external and internal length scale on the flow stress of copper
- Spinodal decomposition of cubic Ti1−xAlxN: Comparison between experiments and modeling
- Combined ab-initio and N-K, Ti-L2,3, V-L2,3 electron energy-loss near edge structure studies for TiN and VN films
- Gold-enhanced oxidation of silicon nanowires
- Numerical determination of parameterised failure curves for ductile structural materials
- Relaxation of semiconductor nanostructures using molecular dynamics with analytic bond order potentials*
- Examination of phase transformations in the system Fe–N–C by means of nitrocarburising reactions and secondary annealing experiments; the α + ∊ two-phase equilibrium
- Applied
- On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS
- Silicon nitride tools for hot rolling of high-alloyed steel and superalloy wires – load analysis and first practical tests
- Development of the unloading stiffness during cyclic plastic deformation of a high-strength aluminium alloy in different tempers
- Enhanced thermal stability of a cobalt–boron carbide nanocomposite by ion-implantation
- Experimental studies and thermodynamic simulation of phase transformations in high Nb containing γ-TiAl based alloys
- Kinetics of nanoscale structure development during Mg-vapour reduction of tantalum oxide
- On the interaction of ductile damage and materials softening of a Ni-base alloy during hot deformation
- Adhesive contact between flat punches with finite edge radius and an elastic half-space
- Notifications
- DGM News
