Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Contents
Veröffentlicht/Copyright:
11. Juni 2013
Published Online: 2013-06-11
Published in Print: 2012-05-01
© 2012, Carl Hanser Verlag, München
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria in the “SnO”–SiO2–“FeO” system in equilibrium with tin–iron alloy and the potential application for electronic scrap recycling
- A model to calculate the viscosity of silicate melts
- Surface structure of different interstitial austenitic steels after impact wear
- Microstructural study of boron-doped Co–Re–Cr alloys by means of transmission electron microscopy and electron energy-loss spectroscopy
- Orientation relationship between 14H-LPSO structured X phase and DO3-type (Mg,Zn)3RE phase in an Mg–Gd–Y–Zn–Zr alloy
- Microstructural, optical, and dielectric properties of nanocrystalline TiO2 films prepared via ion-assisted magnetron sputtering
- An investigation of the microstructure and properties of the explosively welded Gr5–SS304 clad plates for golf heads
- Cyclic fibre texture in hot extruded Ni50Mn29Ga21
- Development of high-strength pure magnesium and wrought magnesium alloys AZ31, AZ61, and AZ91 processed by hydrostatic extrusion with back pressure
- Effect of cerium and aluminium on the hot-deformation behaviour of magnesium
- Effect of alloying elements on stage-III work-hardening behaviour of Al–Zn–Mg(–Cu) alloys
- Effect of titanium on the as-cast microstructure and impact toughness of hypereutectic high-chromium cast iron
- Microstructure and mechanical properties of nanocrystalline WC-particle-reinforced Ti-based composites with nano/ultrafine-grained intermetallic matrix from spark plasma sintering and crystallization of amorphous phase
- Plasticity enhancement in centrally confined Zr-based bulk metallic glass
- In-situ observation of the fracture process in Al–Zn–Mg–Cu alloys
- Relationship between the mechanical properties and the surface roughness of marble
- Light, multi-layer, screening textiles with a high capacity for absorbing electromagnetic fields in the high frequency range
- Immobilization of zinc oxide nanoparticles on cotton fabrics using poly 4-styrenesulfonic acid polyelectrolyte
- People
- Prof. Dr. rer. nat. Ludwig Schultz
- DGM News
- DGM News
Artikel in diesem Heft
- Contents
- Contents
- Original Contributions
- Phase equilibria in the “SnO”–SiO2–“FeO” system in equilibrium with tin–iron alloy and the potential application for electronic scrap recycling
- A model to calculate the viscosity of silicate melts
- Surface structure of different interstitial austenitic steels after impact wear
- Microstructural study of boron-doped Co–Re–Cr alloys by means of transmission electron microscopy and electron energy-loss spectroscopy
- Orientation relationship between 14H-LPSO structured X phase and DO3-type (Mg,Zn)3RE phase in an Mg–Gd–Y–Zn–Zr alloy
- Microstructural, optical, and dielectric properties of nanocrystalline TiO2 films prepared via ion-assisted magnetron sputtering
- An investigation of the microstructure and properties of the explosively welded Gr5–SS304 clad plates for golf heads
- Cyclic fibre texture in hot extruded Ni50Mn29Ga21
- Development of high-strength pure magnesium and wrought magnesium alloys AZ31, AZ61, and AZ91 processed by hydrostatic extrusion with back pressure
- Effect of cerium and aluminium on the hot-deformation behaviour of magnesium
- Effect of alloying elements on stage-III work-hardening behaviour of Al–Zn–Mg(–Cu) alloys
- Effect of titanium on the as-cast microstructure and impact toughness of hypereutectic high-chromium cast iron
- Microstructure and mechanical properties of nanocrystalline WC-particle-reinforced Ti-based composites with nano/ultrafine-grained intermetallic matrix from spark plasma sintering and crystallization of amorphous phase
- Plasticity enhancement in centrally confined Zr-based bulk metallic glass
- In-situ observation of the fracture process in Al–Zn–Mg–Cu alloys
- Relationship between the mechanical properties and the surface roughness of marble
- Light, multi-layer, screening textiles with a high capacity for absorbing electromagnetic fields in the high frequency range
- Immobilization of zinc oxide nanoparticles on cotton fabrics using poly 4-styrenesulfonic acid polyelectrolyte
- People
- Prof. Dr. rer. nat. Ludwig Schultz
- DGM News
- DGM News