Artikel
Lizenziert
Nicht lizenziert
Erfordert eine Authentifizierung
Contents
Veröffentlicht/Copyright:
15. Dezember 2016
Published Online: 2016-12-15
Published in Print: 2016-11-16
© 2016, Carl Hanser Verlag, München
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Sie haben derzeit keinen Zugang zu diesem Inhalt.
Artikel in diesem Heft
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Tribologie – 50 Jahre interdisziplinäre Reibungs- und Verschleißforschung
- Synthetic method to investigate self-loosening of suspension fasteners considering nonlinear tire characteristics at the adhesion limit
- Salt fog corrosion behavior of friction stir welded AA2014-T651 aluminum alloy
- Improving the performance of cementless knee prosthesis coating through functionally graded material
- Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites
- Effect of thickness on structural, corrosion and mechanical properties of a thin ZrN film deposited by medium frequency (MF) reactive sputtering
- Influence of welding parameters on the fracture of PE300 polyethylene friction stir spot welds
- Weldability of 5754 aluminum alloy using a pulsed Nd:YAG micro scale laser
- Improving the visibility of phase gratings for Talbot-Lau X-ray imaging
- Vergleich von zerstörungsfreien und zerstörenden Prüfungen dünner Strukturklebungen in der Umformtechnik
- Fracture behavior of an empty hole using the digital laser dynamic caustic method under directional controlled blasting
- Effect of ZrSiO4 on the corrosion behavior of MgO-FeAl2O4 composite refractory materials
- Time dependent hardness and residual stress reduction in a shot-peened aluminum alloy 2024-T351
- A validation experiment on indium recovery by electrowinning of aqueous electrolytes: Optimization of electrolyte composition
- Qualitätssicherung von Fahrzeug-rädern aus Leichtmetallguss
- Comparison of electrical energy consumption for different material processing procedures
Artikel in diesem Heft
- Inhalt/Contents
- Contents
- Fachbeiträge/Technical Contributions
- Tribologie – 50 Jahre interdisziplinäre Reibungs- und Verschleißforschung
- Synthetic method to investigate self-loosening of suspension fasteners considering nonlinear tire characteristics at the adhesion limit
- Salt fog corrosion behavior of friction stir welded AA2014-T651 aluminum alloy
- Improving the performance of cementless knee prosthesis coating through functionally graded material
- Processing and characterization of graphene nano-platelet (GNP) reinforced aluminum matrix composites
- Effect of thickness on structural, corrosion and mechanical properties of a thin ZrN film deposited by medium frequency (MF) reactive sputtering
- Influence of welding parameters on the fracture of PE300 polyethylene friction stir spot welds
- Weldability of 5754 aluminum alloy using a pulsed Nd:YAG micro scale laser
- Improving the visibility of phase gratings for Talbot-Lau X-ray imaging
- Vergleich von zerstörungsfreien und zerstörenden Prüfungen dünner Strukturklebungen in der Umformtechnik
- Fracture behavior of an empty hole using the digital laser dynamic caustic method under directional controlled blasting
- Effect of ZrSiO4 on the corrosion behavior of MgO-FeAl2O4 composite refractory materials
- Time dependent hardness and residual stress reduction in a shot-peened aluminum alloy 2024-T351
- A validation experiment on indium recovery by electrowinning of aqueous electrolytes: Optimization of electrolyte composition
- Qualitätssicherung von Fahrzeug-rädern aus Leichtmetallguss
- Comparison of electrical energy consumption for different material processing procedures
